Two of the Windows bots are failing test\CodeGen\X86\GlobalISel\select-inc.mir
which should not have been affected by the change. Reverting while I investigate.
Also reverted r310735 because it builds on r310716.
llvm-svn: 310745
Summary:
Support the case where an operand of a pattern is also the whole of the
result pattern. In this case the original result and all its uses must be
replaced by the operand. However, register class restrictions can require
a COPY. This patch handles both cases by always emitting the copy and
leaving it for the register allocator to optimize.
Depends on D35833
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: javed.absar, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36084
llvm-svn: 310716
Summary:
This patch enables the import of rules containing 'imm' operands that do not
constrain the acceptable values using predicates. Support for ImmLeaf will
arrive in a later patch.
Depends on D35681
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35833
llvm-svn: 310343
With this change, the GlobalISel library gets always built. In
particular, this is not possible to opt GlobalISel out of the build
using the LLVM_BUILD_GLOBAL_ISEL variable any more.
llvm-svn: 309990
It revealed a bug in the Localizer pass which has now been fixed.
This includes the fix for SUBREG_TO_REG committed separately last time.
llvm-svn: 308688
A generic variant of IMPLICIT_DEF was added in r306875, but this
survives to selection and hits a `Cannot Select`. Add handling that
converts the note to a regular IMPLICIT_DEF.
llvm-svn: 307817
Add breaks - doesn't affect results as both GPR/FPU both check for 32/64 bit sizes. So will still default to GenericOps in the same way.
llvm-svn: 307484
Summary:
Replace the matcher if-statements for each rule with a state-machine. This
significantly reduces compile time, memory allocations, and cumulative memory
allocation when compiling AArch64InstructionSelector.cpp.o after r303259 is
recommitted.
The following patches will expand on this further to fully fix the regressions.
Reviewers: rovka, ab, t.p.northover, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: vitalybuka, aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D33758
llvm-svn: 307079
Summary:
After this patch, we finally have test cases that require multiple
instruction emission.
Depends on D33590
Reviewers: ab, qcolombet, t.p.northover, rovka, kristof.beyls
Subscribers: javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D33596
llvm-svn: 306388
Summary:
Predicate<> now has a field to indicate how often it must be recomputed.
Currently, there are two frequencies, per-module (RecomputePerFunction==0)
and per-function (RecomputePerFunction==1). Per-function predicates are
currently recomputed more frequently than necessary since the only predicate
in this category is cheap to test. Per-module predicates are now computed in
getSubtargetImpl() while per-function predicates are computed in selectImpl().
Tablegen now manages the PredicateBitset internally. It should only be
necessary to add the required includes.
Also fixed a problem revealed by the test case where
constrainSelectedInstRegOperands() would attempt to tie operands that
BuildMI had already tied.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32491
llvm-svn: 301750
Summary:
Some targets need to be able to do more complex rendering than just adding an
operand or two to an instruction. For example, it may need to insert an
instruction to extract a subreg first, or it may need to perform an operation
on the operand.
In SelectionDAG, targets would create SDNode's to achieve the desired effect
during the complex pattern predicate. This worked because SelectionDAG had a
form of garbage collection that would take care of SDNode's that were created
but not used due to a later predicate rejecting a match. This doesn't translate
well to GlobalISel and the churn was wasteful.
The API changes in this patch enable GlobalISel to accomplish the same thing
without the waste. The API is now:
InstructionSelector::OptionalComplexRendererFn selectArithImmed(MachineOperand &Root) const;
where Root is the root of the match. The return value can be omitted to
indicate that the predicate failed to match, or a function with the signature
ComplexRendererFn can be returned. For example:
return OptionalComplexRendererFn(
[=](MachineInstrBuilder &MIB) { MIB.addImm(Immed).addImm(ShVal); });
adds two immediate operands to the rendered instruction. Immed and ShVal are
captured from the predicate function.
As an added bonus, this also reduces the amount of information we need to
provide to GIComplexOperandMatcher.
Depends on D31418
Reviewers: aditya_nandakumar, t.p.northover, qcolombet, rovka, ab, javed.absar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D31761
llvm-svn: 301079
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300993
It's causing llvm-clang-x86_64-expensive-checks-win to fail to compile and I
haven't worked out why. Reverting to make it green while I figure it out.
llvm-svn: 300978
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300964
Summary: This resolves the issue of tablegen-erated includes in the headers for non-GlobalISel builds in a simpler way than before.
Reviewers: qcolombet, ab
Reviewed By: ab
Subscribers: igorb, ab, mgorny, dberris, rovka, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30998
llvm-svn: 299637
Summary:
Lift the restrictions that prevented the tree walking introduced in the
previous change and add support for patterns like:
(G_ADD (G_MUL (G_SEXT $src1), (G_SEXT $src2)), $src3) -> SMADDWrrr $dst, $src1, $src2, $src3
Also adds support for G_SEXT and G_ZEXT to support these cases.
One particular aspect of this that I should draw attention to is that I've
tried to be overly conservative in determining the safety of matches that
involve non-adjacent instructions and multiple basic blocks. This is intended
to be used as a cheap initial check and we may add a more expensive check in
the future. The current rules are:
* Reject if any instruction may load/store (we'd need to check for intervening
memory operations.
* Reject if any instruction has implicit operands.
* Reject if any instruction has unmodelled side-effects.
See isObviouslySafeToFold().
Reviewers: t.p.northover, javed.absar, qcolombet, aditya_nandakumar, ab, rovka
Reviewed By: ab
Subscribers: igorb, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30539
llvm-svn: 299430
We're not to the point of supporting the load/store patterns yet
(because they extensively use PatFrags).
But in the meantime, we can implement some of the simplest addressing
modes.
llvm-svn: 298863
CBZ/CBNZ represent a substantial portion of all conditional branches.
Look through G_ICMP to select them.
We can't use tablegen yet because the existing patterns match an
AArch64ISD node.
llvm-svn: 298856
Earlier stages of GlobalISel always use ConstantInt in G_CONSTANT so that's
what we should check for.
This fixes a crash introduced in r297782.
llvm-svn: 297968
Summary:
Adds a new kind of MachineOperand: MO_Placeholder.
This operand must not appear in the MIR and only exists as a way of
creating an 'uninitialized' operand until a matcher function overwrites it.
Depends on D30046, D29712
Reviewers: t.p.northover, ab, rovka, aditya_nandakumar, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30089
llvm-svn: 297782
Summary:
This isn't testable for AArch64 by itself so this patch also adds
support for constant immediates in the pattern and physical
register uses in the result.
The new IntOperandMatcher matches the constant in patterns such as
'(set $rd:GPR32, (G_XOR $rs:GPR32, -1))'. It's always safe to fold
immediates into an instruction so this is the first rule that will match
across multiple BB's.
The Renderer hierarchy is responsible for adding operands to the result
instruction. Renderers can copy operands (CopyRenderer) or add physical
registers (in particular %wzr and %xzr) to the result instruction
in any order (OperandMatchers now import the operand names from
SelectionDAG to allow renderers to access any operand). This allows us to
emit the result instruction for:
%1 = G_XOR %0, -1 --> %1 = ORNWrr %wzr, %0
%1 = G_XOR -1, %0 --> %1 = ORNWrr %wzr, %0
although the latter is untested since the matcher/importer has not been
taught about commutativity yet.
Added BuildMIAction which can build new instructions and mutate them where
possible. W.r.t the mutation aspect, MatchActions are now told the name of
an instruction they can recycle and BuildMIAction will emit mutation code
when the renderers are appropriate. They are appropriate when all operands
are rendered using CopyRenderer and the indices are the same as the matcher.
This currently assumes that all operands have at least one matcher.
Finally, this change also fixes a crash in
AArch64InstructionSelector::select() caused by an immediate operand
passing isImm() rather than isCImm(). This was uncovered by the other
changes and was detected by existing tests.
Depends on D29711
Reviewers: t.p.northover, ab, qcolombet, rovka, aditya_nandakumar, javed.absar
Reviewed By: rovka
Subscribers: aemerson, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D29712
llvm-svn: 296131
The AAPCS ABI is substantially more complicated so that's coming in a separate
patch. For now we can generate correct code for iOS though.
llvm-svn: 294493
This surprisingly isn't NFC because there are patterns to select GPR
sub to SUBSWrr (rather than SUBWrr/rs); SUBS is later optimized to
SUB if NZCV is dead. From ISel's perspective, both are fine.
llvm-svn: 293010
Since r279760, we've been marking as legal operations on narrow integer
types that have wider legal equivalents (for instance, G_ADD s8).
Compared to legalizing these operations, this reduced the amount of
extends/truncates required, but was always a weird legalization decision
made at selection time.
So far, we haven't been able to formalize it in a way that permits the
selector generated from SelectionDAG patterns to be sufficient.
Using a wide instruction (say, s64), when a narrower instruction exists
(s32) would introduce register class incompatibilities (when one narrow
generic instruction is selected to the wider variant, but another is
selected to the narrower variant).
It's also impractical to limit which narrow operations are matched for
which instruction, as restricting "narrow selection" to ranges of types
clashes with potentially incompatible instruction predicates.
Concerns were also raised regarding MIPS64's sign-extended register
assumptions, as well as wrapping behavior.
See discussions in https://reviews.llvm.org/D26878.
Instead, legalize the operations.
Should we ever revert to selecting these narrow operations, we should
try to represent this more accurately: for instance, by separating
a "concrete" type on operations, and an "underlying" type on vregs, we
could move the "this narrow-looking op is really legal" decision to the
legalizer, and let the selector use the "underlying" vreg type only,
which would be guaranteed to map to a register class.
In any case, we eventually should mitigate:
- the performance impact by selecting no-op extract/truncates to COPYs
(which we currently do), and the COPYs to register reuses (which we
don't do yet).
- the compile-time impact by optimizing away extract/truncate sequences
in the legalizer.
llvm-svn: 292827
This adds a basic tablegen backend that analyzes the SelectionDAG
patterns to find simple ones that are eligible for GlobalISel-emission.
That's similar to FastISel, with one notable difference: we're not fed
ISD opcodes, so we need to map the SDNode operators to generic opcodes.
That's done using GINodeEquiv in TargetGlobalISel.td.
Otherwise, this is mostly boilerplate, and lots of filtering of any kind
of "complicated" pattern. On AArch64, this is sufficient to match G_ADD
up to s64 (to ADDWrr/ADDXrr) and G_BR (to B).
Differential Revision: https://reviews.llvm.org/D26878
llvm-svn: 290284
We were using the correct pseudo-instruction, but because the operand's flags
weren't set correctly we still ended up emitting incorrect relocations during
MC lowering.
llvm-svn: 289566
This makes it more similar to the floating-point constant, and also allows for
larger constants to be translated later. There's no real functional change in
this patch though, just syntax updates.
llvm-svn: 288712
Self-referencing PHI nodes need their destination operands to be constrained
because nothing else is likely to do so. For now we just pick a register class
naively.
Patch mostly by Ahmed again.
llvm-svn: 286183
AArch64 actually supports many 8-bit operations under the definition used by
GlobalISel: the designated information-carrying bits of a GPR32 get the right
value if you just use the normal 32-bit instruction.
llvm-svn: 284526
Daniel Sanders