Summary:
D53821 fixed the bogus MSVC (at least 2017) C4146 warning (unary minus applied on unsigned type)
by using std::numeric_limits<int32_t>::min().
The warning was because -2147483648 is incorrectly treated as unsigned long instead of long long)
Let's use INT32_MIN which is arguably more readable.
Note, on GCC or clang, -0x80000000 works fine (ILP64: long, LP64: long long).
Reviewers: ruiu, jhenderson, sfertile, espindola
Reviewed By: sfertile
Subscribers: emaste, nemanjai, arichardson, kbarton, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D54200
llvm-svn: 346356
Summary:
There are really three different kinds of TLS layouts:
* A fixed TLS-to-TP offset. On architectures like PowerPC, MIPS, and
RISC-V, the thread pointer points to a fixed offset from the start
of the executable's TLS segment. The offset is 0x7000 for PowerPC
and MIPS, which allows a signed 16-bit offset to reach 0x1000 of
per-thread implementation data and 0xf000 of the application's TLS
segment. The size and layout of the TCB isn't relevant to the static
linker and might not be known.
* A fixed TCB size. This is the format documented as "variant 1" in
Ulrich Drepper's TLS spec. The thread pointer points to a 2-word TCB
followed by the executable's TLS segment. The first word is always
the DTV pointer. Used on ARM. The thread pointer must be aligned to
the TLS segment's alignment, possibly creating alignment padding.
* Variant 2. This format predates variant 1 and is also documented in
Drepper's TLS spec. It allocates the executable's TLS segment before
the thread pointer, apparently for backwards-compatibility. It's
used on x86 and SPARC.
Factor out an lld:🧝:getTlsTpOffset() function for use in a
follow-up patch for Android. The TcbSize/TlsTpOffset fields are only used
in getTlsTpOffset, so replace them with a switch on Config->EMachine.
Reviewers: espindola, ruiu, PkmX, jrtc27
Reviewed By: ruiu, PkmX, jrtc27
Subscribers: jyknight, emaste, sdardis, nemanjai, javed.absar, arichardson, kristof.beyls, kbarton, fedor.sergeev, atanasyan, PkmX, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D53905
llvm-svn: 345775
Visual Studio has a bug where it converts the integer literal 2147483648
into an unsigned int instead of a long long (i.e. it follows C89 rules).
The bug has been reported as:
https://developercommunity.visualstudio.com/content/problem/141813/-2147483648-c4146-error.html.
Because of this bug, we were getting a signed/unsigned comparison
warning in VS2015 from the old code (the subsequent unary negation had
no effect on the type).
Reviewed by: sfertile
Differential Revision: https://reviews.llvm.org/D53821
llvm-svn: 345579
Adjusted the range check on a call instruction from 24 bits signed to
26 bits signed. While the instruction only encodes 24 bits, the target is
assumed to be 4 byte aligned, and the value that is encoded in the instruction
gets shifted left by 2 to form the offset. Also added a check that the offset is
indeed at least 4 byte aligned.
Differential Revision: https://reviews.llvm.org/D53401
llvm-svn: 344747
Recommitting https://reviews.llvm.org/rL344544 after fixing undefined behavior
from left-shifting a negative value. Original commit message:
This support is slightly different then the X86_64 implementation in that calls
to __morestack don't need to get rewritten to calls to __moresatck_non_split
when a split-stack caller calls a non-split-stack callee. Instead the size of
the stack frame requested by the caller is adjusted prior to the call to
__morestack. The size the stack-frame will be adjusted by is tune-able through a
new --split-stack-adjust-size option.
llvm-svn: 344622
This reverts commit https://reviews.llvm.org/rL344544, which causes failures on
a undefined behaviour sanitizer bot -->
lld/ELF/Arch/PPC64.cpp:849:35: runtime error: left shift of negative value -1
llvm-svn: 344551
This support is slightly different then the X86_64 implementation in that calls
to __morestack don't need to get rewritten to calls to __moresatck_non_split
when a split-stack caller calls a non-split-stack callee. Instead the size of
the stack frame requested by the caller is adjusted prior to the call to
__morestack. The size the stack-frame will be adjusted by is tune-able through a
new --split-stack-adjust-size option.
Differential Revision: https://reviews.llvm.org/D52099
llvm-svn: 344544
The GOT is referenced through the symbol _GLOBAL_OFFSET_TABLE_ .
The relocation added calculates the offset into the global offset table for
the entry of a symbol. In order to get the correct TargetVA I needed to
create an new relocation expression, HEXAGON_GOT. It does
Sym.getGotVA() - In.GotPlt->getVA().
Differential Revision: https://reviews.llvm.org/D52744
llvm-svn: 343784
Summary:
An AArch64 LE relocation is a positive ("variant 1") offset. This
relocation is used to write the upper 12 bits of a 24-bit offset into an
add instruction:
add x0, x0, :tprel_hi12:v1
The comment in the ARM docs for R_AARCH64_TLSLE_ADD_TPREL_HI12 is:
"Set an ADD immediate field to bits [23:12] of X; check 0 <= X < 2^24."
Reviewers: javed.absar, espindola, ruiu, peter.smith, zatrazz
Reviewed By: ruiu
Subscribers: emaste, arichardson, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D52525
llvm-svn: 343144
This is https://bugs.llvm.org//show_bug.cgi?id=38919.
Currently, LLD may report "unsupported relocation target while parsing debug info"
when parsing the debug information.
At the same time LLD does that for zeroed R_X86_64_NONE relocations,
which obviously has "invalid" targets.
The nature of R_*_NONE relocation assumes them should be ignored.
This patch teaches LLD to stop reporting the debug information parsing errors for them.
Differential revision: https://reviews.llvm.org/D52408
llvm-svn: 343078
Previously, if you invoke lld's `main` more than once in the same process,
the second invocation could fail or produce a wrong result due to a stale
pointer values of the previous run.
Differential Revision: https://reviews.llvm.org/D52506
llvm-svn: 343009
Summary:
As for x86_64, the default image base for AArch64 and i386 should be
aligned to a superpage appropriate for the architecture.
On AArch64, this is 2 MiB, on i386 it is 4 MiB.
Reviewers: emaste, grimar, javed.absar, espindola, ruiu, peter.smith, srhines, rprichard
Reviewed By: ruiu, peter.smith
Subscribers: jfb, markj, arichardson, krytarowski, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D50297
llvm-svn: 342746
The PPC64 elf V2 abi defines 2 entry points for a function. There are a few
places we need to calculate the offset from the global entry to the local entry
and how this is done is not straight forward. This patch adds a helper function
mostly for documentation purposes, explaining how the 2 entry points differ and
why we choose one over the other, as well as documenting how the offsets are
encoded into a functions st_other field.
Differential Revision: https://reviews.llvm.org/D52231
llvm-svn: 342603
The access sequence for global variables in the medium and large code models use
2 instructions to add an offset to the toc-pointer. If the offset fits whithin
16-bits then the instruction that sets the high 16 bits is redundant.
This patch adds the --toc-optimize option, (on by default) and enables rewriting
of 2 instruction global variable accesses into 1 when the offset from the
TOC-pointer to the variable (or .got entry) fits in 16 signed bits. eg
addis %r3, %r2, 0 --> nop
addi %r3, %r3, -0x8000 --> addi %r3, %r2, -0x8000
This rewriting can be disabled with the --no-toc-optimize flag
Differential Revision: https://reviews.llvm.org/D49237
llvm-svn: 342602
A General-dynamic tls access can be written using a R_PPC64_TLSGD16 relocation
if the target got entry is within 16 bits of the TOC-base. This patch adds
support for R_PPC64_TLSGD16 by relaxing it the same as a R_PPC64_GOT_TLSGD16_LO.
Differential Revision: https://reviews.llvm.org/D52055
llvm-svn: 342411
There are a growing number of places when we either want to read or write an
instruction when handling a half16 relocation type. On big-endian the buffer
pointer is pointing into the middle of the word we want and on little-endian it
is pointing to the start of the word. These 2 helpers are to simplify reading
and writing in these contexts.
Differential Revision: https://reviews.llvm.org/D52115
llvm-svn: 342410
Relanding r340564, original commit message:
Fixes the handling of *_DS relocations used on DQ-form instructions where we
were overwriting some of the extended opcode bits. Also adds an alignment check
so that the user will receive a diagnostic error if the value we are writing
is not properly aligned.
Differential Revision: https://reviews.llvm.org/D51124
llvm-svn: 340832
This reverts commit 5125b44dbb5d06b715213e4bec75c7346bfcc7d3.
ppc64-dq.s and ppc64-error-missaligned-dq.s fail on several of the build-bots.
Reverting to investigate.
llvm-svn: 340568
Fixes the handling of *_DS relocations used on DQ-form instructions where we
were overwriting some of the extended opcode bits. Also adds an alignment check
so that the user will receive a diagnostic error if the value we are writing
is not properly aligned.
Differential Revision: https://reviews.llvm.org/D51124
llvm-svn: 340564
This patch adds the target call back relaxTlsIeToLe to support TLS relaxation
from initial exec to local exec model.
Differential Revision: https://reviews.llvm.org/D48091
llvm-svn: 340281
Older Arm architectures do not support the MOVT and MOVW instructions so we
must use an alternative sequence of instructions to transfer control to the
destination.
Assuming at least Armv5 this patch adds support for Thunks that load or add
to the program counter. Note that there are no Armv5 Thumb Thunks as there
is no Thumb branch instruction in Armv5 that supports Thunks. These thunks
will not work for Armv4t (arm7tdmi) as this architecture cannot change state
from using the LDR or ADD instruction.
Differential Revision: https://reviews.llvm.org/D50077
llvm-svn: 340160
The Thumb BL and BLX instructions on older Arm Architectures such as v5 and
v6 have a constrained encoding J1 and J2 must equal 1, later Architectures
relaxed this restriction allowing J1 and J2 to be used to calculate a larger
immediate.
This patch adds support for the old encoding, it is used when the build
attributes for the input objects only contain older architectures.
Differential Revision: https://reviews.llvm.org/D50076
llvm-svn: 340159
Patch by PkmX.
This patch makes lld recognize RISC-V target and implements basic
relocation for RV32/RV64 (and RVC). This should be necessary for static
linking ELF applications.
The ABI documentation for RISC-V can be found at:
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md.
Note that the documentation is far from complete so we had to figure out
some details from bfd.
The patch should be pretty straightforward. Some highlights:
- A new relocation Expr R_RISCV_PC_INDIRECT is added. This is needed as
the low part of a PC-relative relocation is linked to the corresponding
high part (auipc), see:
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md#pc-relative-symbol-addresses
- LLVM's MC support for RISC-V is very incomplete (we are working on
this), so tests are given in objectyaml format with the original
assembly included in the comments. Once we have complete support for
RISC-V in MC, we can switch to llvm-as/llvm-objdump.
- We don't support linker relaxation for now as it requires greater
changes to lld that is beyond the scope of this patch. Once this is
accepted we can start to work on adding relaxation to lld.
Differential Revision: https://reviews.llvm.org/D39322
llvm-svn: 339364
This is a larger patch. This relocation has irregular immediate
masks that require a lookup to find the correct mask.
Differential Revision: https://reviews.llvm.org/D50450
llvm-svn: 339332
The Tag_ABI_VFP_args build attribute controls the procedure call standard
used for floating point parameters on ARM. The values are:
0 - Base AAPCS (FP Parameters passed in Core (Integer) registers
1 - VFP AAPCS (FP Parameters passed in FP registers)
2 - Toolchain specific (Neither Base or VFP)
3 - Compatible with all (No use of floating point parameters)
If the Tag_ABI_VFP_args build attribute is missing it has an implicit value
of 0.
We use the attribute in two ways:
- Detect a clash in calling convention between Base, VFP and Toolchain.
we follow ld.bfd's lead and do not error if there is a clash between an
implicit Base AAPCS caused by a missing attribute. Many projects
including the hard-float (VFP AAPCS) version of glibc contain assembler
files that do not use floating point but do not have Tag_ABI_VFP_args.
- Set the EF_ARM_ABI_FLOAT_SOFT or EF_ARM_ABI_FLOAT_HARD ELF header flag
for Base or VFP AAPCS respectively. This flag is used by some ELF
loaders.
References:
- Addenda to, and Errata in, the ABI for the ARM Architecture for
Tag_ABI_VFP_args
- Elf for the ARM Architecture for ELF header flags
Fixes PR36009
Differential Revision: https://reviews.llvm.org/D49993
llvm-svn: 338377
George Rimar