Summary:
this reduces significantly the number of assumes generated without aftecting too much
the information that is preserved. this improves the compile-time cost
of enable-knowledge-retention significantly.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, asbirlea, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79650
Along the lines of D77454 and D79968. Unlike loads and stores, the
default alignment is getPrefTypeAlign, to match the existing handling in
various places, including SelectionDAG and InstCombine.
Differential Revision: https://reviews.llvm.org/D80044
This is D77454, except for stores. All the infrastructure work was done
for loads, so the remaining changes necessary are relatively small.
Differential Revision: https://reviews.llvm.org/D79968
For IR generated by a compiler, this is really simple: you just take the
datalayout from the beginning of the file, and apply it to all the IR
later in the file. For optimization testcases that don't care about the
datalayout, this is also really simple: we just use the default
datalayout.
The complexity here comes from the fact that some LLVM tools allow
overriding the datalayout: some tools have an explicit flag for this,
some tools will infer a datalayout based on the code generation target.
Supporting this properly required plumbing through a bunch of new
machinery: we want to allow overriding the datalayout after the
datalayout is parsed from the file, but before we use any information
from it. Therefore, IR/bitcode parsing now has a callback to allow tools
to compute the datalayout at the appropriate time.
Not sure if I covered all the LLVM tools that want to use the callback.
(clang? lli? Misc IR manipulation tools like llvm-link?). But this is at
least enough for all the LLVM regression tests, and IR without a
datalayout is not something frontends should generate.
This change had some sort of weird effects for certain CodeGen
regression tests: if the datalayout is overridden with a datalayout with
a different program or stack address space, we now parse IR based on the
overridden datalayout, instead of the one written in the file (or the
default one, if none is specified). This broke a few AVR tests, and one
AMDGPU test.
Outside the CodeGen tests I mentioned, the test changes are all just
fixing CHECK lines and moving around datalayout lines in weird places.
Differential Revision: https://reviews.llvm.org/D78403
Summary:
The assume builder was non-deterministic when working on unamed values.
this patch fixes this.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: hiraditya, mgrang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78616
This will allow us to use the datalayout to disambiguate other
constructs in IR, like load alignment. Split off from D78403.
Differential Revision: https://reviews.llvm.org/D78413
Check that a call has an attached MemoryAccess before calling
getClobbering on the instruction.
If no access is attached, the instruction does not access memory.
Resolves PR43441.
llvm-svn: 374920
The AllConstant check needs to be moved out of the if/else if chain to
avoid a test regression. The "there is no SimplifyZExt" comment
puzzles me, since there is SimplifyCastInst. Additionally, the
Simplify* calls seem to not see the operand as constant, so this needs
to be tried if the simplify failed.
llvm-svn: 362653
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
llvm-svn: 358546
As discussed on PR41125 and D59363, we have a mismatch between icmp eq/ne cases with an undef operand:
When the other operand is constant we fold to undef (handled in ConstantFoldCompareInstruction)
When the other operand is non-constant we fold to a bool constant based on isTrueWhenEqual (handled in SimplifyICmpInst).
Neither is really wrong, but this patch changes the logic in SimplifyICmpInst to consistently fold to undef.
The NewGVN test change is annoying (as with most heavily reduced tests) but AFAICT I have kept the purpose of the test based on rL291968.
Differential Revision: https://reviews.llvm.org/D59541
llvm-svn: 356456
compiler identification lines in test-cases.
(Doing so only because it's then easier to search for references which
are actually important and need fixing.)
llvm-svn: 351200
The current code relies on LeaderUseCount to determine if we can remove
an SSA copy, but in that the LeaderUseCount does not refer to the SSA
copy. If a SSA copy is a dominating leader, we use the operand as dominating
leader instead. This means we removed a user of a ssa copy and we should
decrement its use count, so we can remove the ssa copy once it becomes dead.
Fixes PR38804.
Reviewers: efriedma, davide
Reviewed By: davide
Differential Revision: https://reviews.llvm.org/D51595
llvm-svn: 349217
If we simplify an instruction to itself, we do not need to add a user to
itself. For congruence classes with a defining expression, we already
use a similar logic.
Fixes PR38259.
Reviewers: davide, efriedma, mcrosier
Reviewed By: davide
Differential Revision: https://reviews.llvm.org/D51168
llvm-svn: 346335
As K has to dominate I, IIUC I's range metadata must be a subset of
K's. After Eli's recent clarification to the LangRef, loading a value
outside of the range is undefined behavior.
Therefore if I's range contains elements outside of K's range and we would load
one such value, K would cause undefined behavior.
In cases like hoisting/sinking, we still want the most generic range
over all code paths to/from the hoist/sink point. As suggested in the
patches related to D47339, I will refactor the handling of those
scenarios and try to decouple it from this function as follow up, once
we switched to a similar handling of metadata in most of
combineMetadata.
I updated some tests checking mostly the merging of metadata to keep the
metadata of to dominating load. The most interesting one is probably test8 in
test/Transforms/JumpThreading/thread-loads.ll. It contained a comment
about the alias metadata preventing us to eliminate the branch, but it
seem like the actual problem currently is that we merge the ranges of
both loads and cannot eliminate the icmp afterwards. With this patch, we
manage to eliminate the icmp, as the range of the first load excludes 8.
Reviewers: efriedma, nlopes, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D51629
llvm-svn: 345456
Currently eliminateInstructions only returns true if any instruction got
replaced. In the test case for this patch, we eliminate the trivially
dead calls, for which eliminateInstructions not do a replacement and the
function is not marked as changed, which is why the inliner crashes
while traversing the call graph.
Alternatively we could also change eliminateInstructions to return true
in case we mark instructions for deletion, but that's slightly more code
and doing it at the place where the replacement happens seems safer.
Fixes PR37517.
Reviewers: davide, mcrosier, efriedma, bjope
Reviewed By: bjope
Differential Revision: https://reviews.llvm.org/D51169
llvm-svn: 341651
NewGVN uses InstructionSimplify for simplifications of leaders of
congruence classes. It is not guaranteed that the metadata or other
flags/keywords (like nsw or exact) of the leader is available for all members
in a congruence class, so we cannot use it for simplification.
This patch adds a InstrInfoQuery struct with a boolean field
UseInstrInfo (which defaults to true to keep the current behavior as
default) and a set of helper methods to get metadata/keywords for a
given instruction, if UseInstrInfo is true. The whole thing might need a
better name, to avoid confusion with TargetInstrInfo but I am not sure
what a better name would be.
The current patch threads through InstrInfoQuery to the required
places, which is messier then it would need to be, if
InstructionSimplify and ValueTracking would share the same Query struct.
The reason I added it as a separate struct is that it can be shared
between InstructionSimplify and ValueTracking's query objects. Also,
some places do not need a full query object, just the InstrInfoQuery.
It also updates some interfaces that do not take a Query object, but a
set of optional parameters to take an additional boolean UseInstrInfo.
See https://bugs.llvm.org/show_bug.cgi?id=37540.
Reviewers: dberlin, davide, efriedma, sebpop, hiraditya
Reviewed By: hiraditya
Differential Revision: https://reviews.llvm.org/D47143
llvm-svn: 340031
In combineMetadata, we should be able to preserve K's nonnull metadata,
if K does not move. This condition should hold for all replacements by
NewGVN/GVN, but I added a bunch of assertions to verify that.
Fixes PR35038.
There probably are additional kinds of metadata that could be preserved
using similar reasoning. This is follow-up work.
Reviewers: dberlin, davide, efriedma, nlopes
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47339
llvm-svn: 339149
This is the second patch of the series which intends to enable jump threading for an inlined method whose return type is std::pair<int, bool> or std::pair<bool, int>.
The first patch is https://reviews.llvm.org/rL338485.
This patch handles code sequences that merges two values using `shl` and `or`, then extracts one value using `and`.
Differential Revision: https://reviews.llvm.org/D49981
llvm-svn: 338817
This commit includes unit tests for D48828, which enhances InstSimplify to enable jump threading with a method whose return type is std::pair<int, bool> or std::pair<bool, int>.
I am going to commit the actual transformation later.
llvm-svn: 338107
This is a workaround and it would be better to fix this generally, but
doing it generally is quite tricky. See D48541 and PR38117.
Doing it in PredicateInfo directly allows us to use the type address to
differentiate different unnamed types, because neither the created
declarations nor the ssa_copy calls should be visible after
PredicateInfo got destroyed.
Reviewers: efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D49126
llvm-svn: 337828
Summary:
This patch introduce new intrinsic -
strip.invariant.group that was described in the
RFC: Devirtualization v2
Reviewers: rsmith, hfinkel, nlopes, sanjoy, amharc, kuhar
Subscribers: arsenm, nhaehnle, JDevlieghere, hiraditya, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47103
Co-authored-by: Krzysztof Pszeniczny <krzysztof.pszeniczny@gmail.com>
llvm-svn: 336073
This patch fixes two bugs:
* test1: Previously assume(a >= 5) concluded that a == 5. That's only
valid for assume(a == 5)...
* test2: If operands were swapped, additional users were added to the
wrong cmp operand. This resulted in an "unsettled iteration"
assertion failure.
Patch by Nikita Popov
Differential Revision: https://reviews.llvm.org/D46974
llvm-svn: 333007
Summary:
This feature is not needed, but it might be usefull in the future
to use metadata to mark what which function should support it
(and strip it when not).
Reviewers: rsmith, sanjoy, amharc, kuhar
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D45419
llvm-svn: 332787
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
It also adds a check making sure PHIs for operands are all in the same
block.
Patch by Daniel Berlin <dberlin@dberlin.org>
Reviewers: dberlin, davide
Differential Revision: https://reviews.llvm.org/D43865
llvm-svn: 330444
If those operands change, we might find a leader for ValueOp, which
could enable new phi-of-op creation.
This fixes a case where we missed creating a phi-of-ops node. With D43865
and this patch, bootstrapping clang/llvm works with -enable-newgvn, whereas
without it, the "value changed after iteration" assertion is triggered.
Reviewers: dberlin, davide
Reviewed By: dberlin
Differential Revision: https://reviews.llvm.org/D42180
llvm-svn: 330334
In case we update a ValuePHI node created earlier, we could update it
based on a different OpPHI which could be in a different block.
We need to update the TempToBlock mapping reflecting the new block,
otherwise we would end up placing the new phi node in a wrong block.
This problem is exposed by the test case in
https://bugs.llvm.org/show_bug.cgi?id=36504.
This patch fixes a slightly simpler problem than in the bug report. In
the bug's re-producer, the additional problem is that we are re-using a
ValuePHI node with to few incoming values for the new OpPHI. If this
patch makes sense, I will follow it up with a patch that creates a new
PHI node if the existing PHI node has a different number of incoming
values.
Reviewers: davide, dberlin
Reviewed By: dberlin
Differential Revision: https://reviews.llvm.org/D43770
llvm-svn: 326181
There are cases when two tags with different base types denote
accesses to the same direct or indirect member of a structure
type. Currently, merging of such tags results in a tag that
represents an access to an object that has the type of that
member. This patch changes this so that if one of the accesses
encloses the other, then the generic tag is the one of the
enclosed access.
Differential Revision: https://reviews.llvm.org/D39557
llvm-svn: 321019
Summary:
This is LLVM instrumentation for the new HWASan tool. It is basically
a stripped down copy of ASan at this point, w/o stack or global
support. Instrumenation adds a global constructor + runtime callbacks
for every load and store.
HWASan comes with its own IR attribute.
A brief design document can be found in
clang/docs/HardwareAssistedAddressSanitizerDesign.rst (submitted earlier).
Reviewers: kcc, pcc, alekseyshl
Subscribers: srhines, mehdi_amini, mgorny, javed.absar, eraman, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D40932
llvm-svn: 320217
This patch implements Chandler's idea [0] for supporting languages that
require support for infinite loops with side effects, such as Rust, providing
part of a solution to bug 965 [1].
Specifically, it adds an `llvm.sideeffect()` intrinsic, which has no actual
effect, but which appears to optimization passes to have obscure side effects,
such that they don't optimize away loops containing it. It also teaches
several optimization passes to ignore this intrinsic, so that it doesn't
significantly impact optimization in most cases.
As discussed on llvm-dev [2], this patch is the first of two major parts.
The second part, to change LLVM's semantics to have defined behavior
on infinite loops by default, with a function attribute for opting into
potential-undefined-behavior, will be implemented and posted for review in
a separate patch.
[0] http://lists.llvm.org/pipermail/llvm-dev/2015-July/088103.html
[1] https://bugs.llvm.org/show_bug.cgi?id=965
[2] http://lists.llvm.org/pipermail/llvm-dev/2017-October/118632.html
Differential Revision: https://reviews.llvm.org/D38336
llvm-svn: 317729
It's not guaranteed. There's a bug open to sort them in predecessor
order, but it won't happen anytime soon. In the meanwhile, passes
will have to do an O(#preds) scan. Such is life.
llvm-svn: 316953
Summary:
After a discussion with Rekka, i believe this (or a small variant)
should fix the remaining phi-of-ops problems.
Rekka's algorithm for completeness relies on looking up expressions
that should have no leader, and expecting it to fail (IE looking up
expressions that can't exist in a predecessor, and expecting it to
find nothing).
Unfortunately, sometimes these expressions can be simplified to
constants, but we need the lookup to fail anyway. Additionally, our
simplifier outsmarts this by taking these "not quite right"
expressions, and simplifying them into other expressions or walking
through phis, etc. In the past, we've sometimes been able to find
leaders for these expressions, incorrectly.
This change causes us to not to try to phi of ops such expressions.
We determine safety by seeing if they depend on a phi node in our
block.
This is not perfect, we can do a bit better, but this should be a
"correctness start" that we can then improve. It also requires a
bunch of caching that i'll eventually like to eliminate.
The right solution, longer term, to the simplifier issues, is to make
the query interface for the instruction simplifier/constant folder
have the flags we need, so that we can keep most things going, but
turn off the possibly-invalid parts (threading through phis, etc).
This is an issue in another wrong code bug as well.
Reviewers: davide, mcrosier
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D37175
llvm-svn: 312401
Summary: When we backtranslate expressions, we can't use the predicateinfo, since we are evaluating them in a different context.
Reviewers: davide, mcrosier
Subscribers: sanjoy, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D37174
llvm-svn: 312352
Summary:
The New Pass Manager infrastructure was forgetting to keep around the optimization remark yaml file that the compiler might have been producing. This meant setting the option to '-' for stdout worked, but setting it to a filename didn't give file output (presumably it was deleted because compilation didn't explicitly keep it). This change just ensures that the file is kept if compilation succeeds.
So far I have updated one of the optimization remark output tests to add a version with the new pass manager. It is my intention for this patch to also include changes to all tests that use `-opt-remark-output=` but I wanted to get the code patch ready for review while I was making all those changes.
Fixes https://bugs.llvm.org/show_bug.cgi?id=33951
Reviewers: anemet, chandlerc
Reviewed By: anemet, chandlerc
Subscribers: javed.absar, chandlerc, fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D36906
llvm-svn: 311271
This is fine as nothing in the code relies on leader and memory
leader being the same for a given congruency class. Ack'ed by
Dan.
Fixes PR33720.
llvm-svn: 307699
1. When there is no perfect iteration order, we can't let phi nodes
put themselves in terms of things that come later in the iteration
order, or we will endlessly cycle (the normal RPO algorithm clears the
hashtable to avoid this issue).
2. We are sometimes erasing the wrong expression (causing pessimism)
because our equality says loads and stores are the same.
We introduce an exact equality function and use it when erasing to
make sure we erase only identical expressions, not equivalent ones.
llvm-svn: 304807
Otherwise we don't revisit an instruction that could be simplified,
and when we verify, we discover there's something that changed, i.e.
what we had wasn't a maximal fixpoint.
Fixes PR32836.
llvm-svn: 303715
Taken from PR32845. Dan removed the most dominating leader check
in r303443, but we check this test anyway to make sure things
don't regress.
llvm-svn: 303515
In the case where we have an operand defined by a lod of the
same memory location. Historically this was a VariableExpression
because we wanted to make sure they ended up in the same class,
but if we create the right expression, they end up in the same
class anyway.
Fixes PR32897. Thanks to Dan for the detailed discussion and the
fix suggestion.
llvm-svn: 303475
This is a complicated bug involving two issues:
1. What do we do with phi nodes when we prove all arguments are not
live?
2. When is it safe to use value leaders to determine if we can ignore
an argumnet?
llvm-svn: 303453
Summary:
NewGVN: Handle equivalence between phi of ops and op of phis.
This makes our GVN mostly-complete. It would be complete, modulo some
deliberate choices we make. This means it detects roughly all herband
equivalences in polynomial time, including cases notoriously hard for
other GVN's to detect. It also detects a very large swath of the
cases we currently rely on instcombine to detect that involve folding
upwards through phis.
Fixes PR 31125, 31463, PR 31868
Reviewers: davide
Subscribers: Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D32151
llvm-svn: 303444
We can have cycles between PHIs and this causes singleReachablePhi()
to call itself indefintely (until we run out of stack). The proper
solution would be that of computing SCCs, but it's not worth for
now, so just keep a visited set and give up when we find a cycle.
Thanks to Dan for the discussion/help with this.
Fixes PR33014.
llvm-svn: 303393
verifyMemoryCongruency() filters out trivially dead MemoryDef(s),
as we find them immediately dead, before moving from TOP to a new
congruence class.
This fixes the same problem for PHI(s) skipping MemoryPhis if all
the operands are dead.
Differential Revision: https://reviews.llvm.org/D33044
llvm-svn: 303100
I bet the change is correct but this test seems to expose some underlying
problem that manifest only on some buildbots, and I'm not able to reproduce
locally. Unfortunately I can't debug right now but I don't want to annoy
people with spurious failures, so I'll XFAIL until I can take a look (over
the weekend).
llvm-svn: 302976
This code was missing a check for stores, so we were thinking the
congruency class didn't have any memory members, and reset the
memory leader.
Differential Revision: https://reviews.llvm.org/D33056
llvm-svn: 302905
The way we currently define congruency for two PHIExpression(s) is:
1) The operands to the phi functions are congruent
2) The PHIs are defined in the same BasicBlock.
NewGVN works under the assumption that phi operands are in predecessor
order, or at least in some consistent order. OTOH, is valid IR:
patatino:
%meh = phi i16 [ %0, %winky ], [ %conv1, %tinky ]
%banana = phi i16 [ %0, %tinky ], [ %conv1, %winky ]
br label %end
and the in-memory representations of the two SSA registers have an
inconsistent order. This violation of NewGVN assumptions results into
two PHIs found congruent when they're not. While we think it's useful
to have always a consistent order enforced, let's fix this in NewGVN
sorting uses in predecessor order before creating a PHI expression.
Differential Revision: https://reviews.llvm.org/D32990
llvm-svn: 302552
Fixes PR31789 - When loop-vectorize tries to use these intrinsics for a
non-default address space pointer we fail with a "Calling a function with a
bad singature!" assertion. This patch solves this by adding the 'vector of
pointers' argument as an overloaded type which will determine the address
space.
Differential revision: https://reviews.llvm.org/D31490
llvm-svn: 302018
In the testcase attached, we believe %tmp1 implies %tmp4.
where:
br i1 %tmp1, label %bb2, label %bb7
br i1 %tmp4, label %bb5, label %bb7
because Wwhile looking at PredicateInfo stuffs we end up calling
isImpliedTrueByMatchingCmp() with the arguments backwards.
Differential Revision: https://reviews.llvm.org/D32718
llvm-svn: 301849
Summary:
See http://llvm.org/docs/LangRef.html#non-integral-pointer-type
The NewGVN test does not fail without these changes (perhaps it does
try to coerce pointers <-> integers to begin with?), but I added the
test case anyway.
Reviewers: dberlin
Subscribers: mcrosier, llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D32208
llvm-svn: 300730
Summary:
getModRefInfo is meant to answer the question "what impact does this
instruction have on a given memory location" (not even another
instruction).
Long debate on this on IRC comes to the conclusion the answer should be "nothing special".
That is, a noalias volatile store does not affect a memory location
just by being volatile. Note: DSE and GVN and memdep currently
believe this, because memdep just goes behind AA's back after it says
"modref" right now.
see line 635 of memdep. Prior to this patch we would get modref there, then check aliasing,
and if it said noalias, we would continue.
getModRefInfo *already* has this same AA check, it just wasn't being used because volatile was
lumped in with ordering.
(I am separately testing whether this code in memdep is now dead except for the invariant load case)
Reviewers: jyknight, chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31726
llvm-svn: 299741
memorydefs, not just stores. Along the way, we audit and fixup issues
about how we were tracking memory leaders, and improve the verifier
to notice more memory congruency issues.
llvm-svn: 299682
Summary:
Depends on D30928.
This adds support for coercion of stores and memory instructions that do not require insertion to process.
Another few tests down.
I added the relevant tests from rle.ll
Reviewers: davide
Subscribers: llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D30929
llvm-svn: 299330
Tyker