Verbose and non-verbose parsing of .debug_line produced their output at
different points in the program. The most obvious impact of this was
that error messages were produced at different times, but it also
potentially reduced what clients could do by customising the stream or
warning/error handlers.
This change makes the two variants consistent by printing non-verbose
output inline, the same as verbose output.
Testing of the error messages has been modified to check the messages
always appear in the same location to illustrate the behaviour.
Reviewed by: JDevlieghere, dblaikie, MaskRay, labath
Differential Revision: https://reviews.llvm.org/D80989
The flushes previously existed to help ensure consistent error message
output when stdout and stderr were passed to the same location. This is
no longer necessary as errs() is now tied to outs().
Reviewed by: dblaikie, MaskRay, JDevlieghere, labath
Differential Revision: https://reviews.llvm.org/D80803
This patch helps make yaml2obj emit an error message when we try to assign an invalid offset to the entry of the 'debug_ranges' section.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D81357
Previously, if an extended opcode was truncated, it would manifest as an
"unexpected line op length error" which wasn't quite accurate. This
change checks for errors any time data is read whilst parsing an
extended opcode, and reports any errors detected.
Reviewed by: MaskRay, labath, aprantl
Differential Revision: https://reviews.llvm.org/D80797
Reorder `DumpSection` under `handleArgs` in file `MachOObjcopy.cpp`. The
operation to dump a section is now performed before both add and remove
section operations for MachO file format.
Change for the ELF format at D81097. Together fixes
https://bugs.llvm.org/show_bug.cgi?id=44283
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D81123
Reorder `DumpSection` under `handleArgs` in file `ELFObjcopy.cpp`.
`DumpSection` is placed before `replaceAndRemoveSections` and is
therefore now the first operation under `handleArgs`. Thus, it is now
performed before both `add` and `remove` section operations.
Change for the MachO format at D81123. Together fixes https://bugs.llvm.org/show_bug.cgi?id=44283.
Reviewed By: alexshap, jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D81097
It updates two error messages under `performOperation` in the file
llvm-ar.cpp. Furthermore, it also updates tests that print out these
error messages: `llvm/test/Object/ar-create.test` and
`llvm/test/tools/llvm-ar/print.test`.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D80846
Add 2 more tests for the function performOperation under llvm-ar.cpp. It
tests the scenario when the archive could not be opened for reasons
other than `no_such_file_or_directory` In particular, it tests for the
cases `permission_denied` and `is_a_directory` for the target archive.
Reviewed By: alexshap, jhenderson, smeenai, MaskRay
Differential Revision: https://reviews.llvm.org/D80838
Summary:
According to the comments, we want to convert the profile into two binary formats, and then into the md5text format.
We seems to have ignored the intermediate files.
This patch uses them to complete the full roundtrips.
Reviewers: wmi, wenlei
Reviewed By: wmi
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81202
Treat N_AST symbol table entries like other debug entries and don't emit
them in the linked binary.
Differential revision: https://reviews.llvm.org/D81205
This patch addresses the comment in [D80972](https://reviews.llvm.org/D80972#inline-744217).
Before this patch, the initial length field of .debug_aranges section should be declared as:
```
## 32-bit DWARF
debug_aranges:
- Length:
TotalLength: 0x20
Version: 2
...
## 64-bit DWARF
debug_aranges:
- Length:
TotalLength: 0xffffffff
TotalLength64: 0x20
Version: 2
...
```
After this patch:
```
## 32-bit DWARF
debug_aranges:
- [[Format: DWARF32]] ## Optional
Length: 0x20
Version: 2
...
## 64-bit DWARF
debug_aranges:
- Format: DWARF64
Length: 0x20
Version: 2
```
Current implementation of generating DWARF64 .debug_aranges section is buggy. A follow-up patch will improve it and add test cases for DWARF64.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D81063
Like non-verbose output, so that it is easy to recognize the `Line,Column,File,ISA,Discriminator` column values.
Reviewed By: JDevlieghere, jhenderson
Differential Revision: https://reviews.llvm.org/D80874
This implements a new "Excluded" key that can be used
to exclude entries from section header:
```
SectionHeaderTable:
Sections:
...
Excluded:
- Name: .foo
```
Differential revision: https://reviews.llvm.org/D81005
We have unobvious issue in the condition that is used to check
that we do not read past the EOF.
The problem is that the result of "GnuHashTable->nbuckets * 4" expression is uint32.
Because of that it was still possible to overflow it and pass the check.
There was no such problem with the "GnuHashTable->maskwords * sizeof(typename ELFT::Off)"
condition, because of `sizeof` on the right (which gives 64-bits value on x64),
but I've added an explicit conversion to 64-bit value for `GnuHashTable->maskwords` too.
Differential revision: https://reviews.llvm.org/D81103
llvm-cov.test and many Inputs/test* files contain wrong tests.
This patch rewrites a large portion of these files.
The pre-canned .gcno & .gcda are replaced by binaries produced by
clang --coverage (compatible with gcov 4.8~7)
(after some GCDAProfiling.c bugs were fixed by my previous commits).
Also make llvm-cov gcov on a little-endian host capable to parse big-endian .gcno and .gcda,
and make llvm-cov gcov on big-endian host capable to parse little-endian .gcno and .gcda
This patch helps infer the endianness of DWARF sections from `FileHeader`.
Reviewed By: jhenderson, grimar
Differential Revision: https://reviews.llvm.org/D81051
This patch enables yaml2obj to emit the .debug_aranges section in ELFYAML.
Known issues:
- The current implementation of `debug_aranges` doesn't support emitting `segment` in the `(segment, address, length)` tuple. I will fix it in a follow-up patch.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D80972
Some of the --debug-* options can take an optional offset. Although the
man page does a good job of making that clear, it's much harder to
discover from the help output.
Currently the only reference to this is the following sentence:
> Where applicable these parameters take an optional =<offset> argument
> to dump only the entry at the specified offset.
This patch changes the help output from to print [=<offset>] after the
options that take an offset.
--debug-info[=<offset>] - Dump the .debug_info section
rdar://problem/63150066
Differential revision: https://reviews.llvm.org/D80959
This teaches yaml2obj to allocate file space for a no-bits section
when there is a non-nobits section in the same segment that follows it.
It was discussed in D78005 thread and matches GNU linkers and LLD behavior.
Differential revision: https://reviews.llvm.org/D80629
Summary:
This is a result of the discussion at D78113. Previously we would be
only giving the current offset at which the error was detected. However,
this was phrased somewhat ambiguously (as it could also mean that end of
data was at that offset). The new error message includes the current
offset as well as the extent of the data being read.
I've changed a couple of file-level static functions into private member
functions in order to avoid passing a bunch of new arguments everywhere.
Reviewers: dblaikie, jhenderson
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78558
Update for upstream comments. Improve test by writing all the debug
info by hand.
Reviewers: dblaikie, jhenderson
Subscribers: hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80168
This flag (and the whole field DT_FLAGS_1) originated from Solaris. I intend to use it in an LLD patch D80872.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D80871
This will ensure that nothing can ever start parsing data from a future
sequence and part-read data will be returned as 0 instead.
Reviewed by: aprantl, labath
Differential Revision: https://reviews.llvm.org/D80796
This is effectively reverting rGbfdc2552664d to avoid test churn
while we figure out a better way forward.
We at least salvage the warning on name conflict from that patch
though.
If we change the default string again, we may want to mass update
tests at the same time. Alternatively, we could live with the poor
naming if we change -instnamer.
This also adds a test to LLVM as suggested in the post-commit
review. There's a clang test that is also affected. That seems
like a layering violation, but I have not looked at fixing that yet.
Differential Revision: https://reviews.llvm.org/D80584
The debug_line_invalid.test test case was previously using the
interpreted line table dumping to identify which opcodes have been
parsed. This change moves to looking for the expected opcodes
explicitly. This is probably a little clearer and also allows for
testing some cases that wouldn't be easily identifiable from the
interpreted table.
Reviewed by: MaskRay
Differential Revision: https://reviews.llvm.org/D80795
For most tables, we already use commas in headers. This set of patches
unifies dumping the remaining ones.
Differential Revision: https://reviews.llvm.org/D80806
For most tables, we already use commas in headers. This set of patches
unifies dumping the remaining ones.
Differential Revision: https://reviews.llvm.org/D80806
For most tables, we already use commas in headers. This set of patches
unifies dumping the remaining ones.
Differential Revision: https://reviews.llvm.org/D80806
This improves the next points for broken hash tables:
1) Use reportUniqueWarning to prevent duplication when
--hash-table and --elf-hash-histogram are used together.
2) Dump nbuckets and nchain fields. It is often possible
to dump them even when the table itself goes past the EOF etc.
Differential revision: https://reviews.llvm.org/D80373
SUMMARY:
when there are two symbol has the same address. llvm-objdump -D -symbol-description will select symbol based on the following rule:
1. using Label first if there is a Label symbol.
2. If there is not Label, using a symbol which has Storage Mapping class.
3. if more than one symbol has storage mapping class, put the TC0 has the low priority, for other storage mapping class , compare based on the value.
Reviewers: James Henderson ,hubert.reinterpretcast,
Differential Revision: https://reviews.llvm.org/D78387
When a group member is removed, the corresponding record in the
SHT_GROUP section has to be deleted.
This fixes PR46064.
Differential Revision: https://reviews.llvm.org/D80568
When a SHT_GROUP section is removed, but other sections of the group are
kept, the SHF_GROUP flag of these sections should be dropped, otherwise
the resulting ELF file will be malformed.
Differential Revision: https://reviews.llvm.org/D80511
llvm-readelf might crash when the .gnu.hash table goes past the EOF.
This patch splits and updates the code of a helper function `checkGNUHashTable`,
which is similar to `checkHashTable` and fixes the issue.
Differential revision: https://reviews.llvm.org/D80215
Here I've added comments, added testing for llvm-readelf and documented
the behavior that we already have.
It was discussed in the D80380 thread that we want to improve the
"p_memsz does not match p_filesz for GNU_EH_FRAME" message reported
(and probably convert error to a warning). This patch is a preparation
for that.
Differential revision: https://reviews.llvm.org/D80635
Summary:
XRay works on 32-bit ARM but extract didn't support it.
See also another previous attempt in D77858.
Reviewers: MaskRay, dberris, johnislarry
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80185
Summary:
Count the per-module number of basic blocks when the module summary is computed
and sum them up during Thin LTO indexing.
This is used to estimate the working set size under the partial sample PGO.
This is split off of D79831.
Reviewers: davidxl, espindola
Subscribers: emaste, inglorion, hiraditya, MaskRay, steven_wu, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80403
With the "SectionHeaderTable" it is now possible to reorder
entries in the section header table.
It also allows to stop emitting the table.
Differential revision: https://reviews.llvm.org/D80002
Summary:
Define ELF binary code for VE and modify code where should use this new code.
Depends on D79544.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D79545
When the p_offset/p_filesz of the PT_GNU_EH_FRAME is invalid
(e.g larger than the file size) then llvm-readobj might crash.
This patch fixes the issue. I've introduced `ELFFile<ELFT>::getSegmentContent`
method, which is very similar to `ELFFile<ELFT>::getSectionContentsAsArray` one.
Differential revision: https://reviews.llvm.org/D80380
When the `--elf-hash-histogram` is used, the code first tries to build
a histogram for the .hash table and then for the .gnu.hash table.
The problem is that dumper might return early when unable or do not need to
build a histogram for the .hash.
This patch reorders the code slightly to fix the issue and adds a test case.
Differential revision: https://reviews.llvm.org/D80204
Summary:
Some instruction like VPMULDQ is NOT the variant of VPMULD but a new
one.
So we should make sure the suffix matcher only works for memory variant
that has the same size with the suffix.
Currently we only check for SSE/AVX* instructions, because many legacy
instructions didn't declare the alias instructions of their variants.
Differential Revision: https://reviews.llvm.org/D80608
cctools strip has the option "-T" which removes Swift symbols.
This diff implements this option in llvm-strip for MachO.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D80099
Summary:
This patch makes the following changes to SanCov and its complementary Python script in order to resolve issues pertaining to non-UNIX file paths in JSON symbolization information:
* Convert all paths to use forward slash.
* Update `coverage-report-server.py` to correctly handle paths to sources which contain spaces.
* Remove Linux platform restriction for all SanCov unit tests. All SanCov tests passed when ran on my local Windows machine.
Patch by Douglas Gliner.
Reviewers: kcc, filcab, phosek, morehouse, vitalybuka, metzman
Reviewed By: vitalybuka
Subscribers: vsk, Dor1s, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D51018
A CIE with the Length == 0 is a terminator:
https://refspecs.linuxfoundation.org/LSB_5.0.0/LSB-Core-generic/LSB-Core-generic/ehframechpt.html
And GNU objdump recognizes them and prints the following for such entries:
"00000000 ZERO terminator"
This patch teaches llvm-objdump to do the same. I had to update tests to use
"CHECK-NEXT" too.
(Note: it looks perhaps not right that printing is done inside the DebugInfo library,
I'd expect to see the change in the llvm-objdump's code somewhere instead,
but that is how it done atm).
Differential revision: https://reviews.llvm.org/D80476
I've noticed an issue with "Data.getRelocatedValue(...)" call.
it might silently ignore an error when a content is truncated.
That leads to an infinite loop in the code (e.g. llvm-readobj hangs).
After fixing the issue I've found that actually we always tried
to read past the end of a section, even when a content was valid.
It happened because the terminator CIE (a CIE with the length == 0)
was never handled. At first I've tried just to stop adding the terminator
entry (and return), but it does not seem to be correct, because tools like
llvm-objdump might want to print something for such entries
(see comments in the code and test cases).
This patch fixes issues mentioned, provides new test cases for
both llvm-readobj and lib/DebugInfo and adds FIXMEs to existent
test cases related.
Differential revision: https://reviews.llvm.org/D80299
This change does not affect the produced binary.
In this patch I assign a technical suffix to each section/fill
(i.e. chunk) name when it is empty. It allows to simplify the code
slightly and improve error messages reported.
In the code we have the section to index mapping, SN2I, which is
globally used. With this change we can use it to map "empty"
names to indexes now, what is helpful.
Differential revision: https://reviews.llvm.org/D79984
Add support for generating a dsymutil reproducer. The result is a folder
containing all the object files for linking.
When --gen-reproducer is passed, dsymutil uses a FileCollectorFileSystem
which keeps track of all the files used by dsymutil. These files are
copied into a temporary directory when dsymutil exists.
When this path is passed to --use-reproducer, dsymutil uses a
RedirectingFileSystem that will use the files from the reproducer
directory instead of the actual paths. This means you don't need to mess
with the OSO path prefix.
Differential revision: https://reviews.llvm.org/D79398
For describing section/symbol names we can use unique suffixes,
e.g:
```
- Name: '.foo [1]`
- Name: '.foo [2]`
```
It can be a problem (see https://reviews.llvm.org/D79984#inline-734829),
because `[]` are sometimes used to describe a macros:
```
- Name: "[[a0]]"
```
Seems the better approach is to use something else, like "()".
This patch does it and refactors the code related.
Differential revision: https://reviews.llvm.org/D80123
The patch changes dumping of a unit_length field and offsets in headers
in .debug_loclists and .debug_rnglists sections so that they are printed
as 16-digit hex values if the contribution is in the DWARF64 format.
Differential Revision: https://reviews.llvm.org/D79997
The patch changes dumping of unit_length and header_length fields in
headers in .debug_line sections so that they are printed as 16-digit hex
values if the contribution is in the DWARF64 format.
Differential Revision: https://reviews.llvm.org/D79997
The patch changes dumping of the unit_length field in a unit header so
that it is printed as a 16-digit hex value if the unit is in the DWARF64
format.
Differential Revision: https://reviews.llvm.org/D79997
Previously, the option was only implemented for LLVM output. This fixes
https://bugs.llvm.org/show_bug.cgi?id=45695.
At the current time, GNU readelf does not support this option.
Consequently, this patch simply attempts to roughly follow the output
style for similar options like --syms/--notes etc, combined with
--string-dump output.
Reviewed by: MaskRay, grimar
Differential Revision: https://reviews.llvm.org/D79939
Imagine we have a broken .eh_frame.
Below is a possible sample output of llvm-readelf:
```
...
entry 2 {
initial_location: 0x10f5
address: 0x2080
}
}
}
.eh_frame section at offset 0x2028 address 0x2028:
LLVM ERROR: Parsing entry instructions at 0 failed
PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace.
Stack dump:
0. Program arguments: /home/umb/LLVM/LLVM/llvm-project/build/bin/llvm-readelf -a 1
#0 0x000055f4a2ff5a1a llvm::sys::PrintStackTrace(llvm::raw_ostream&) (/home/umb/LLVM/LLVM/llvm-project/build/bin/llvm-readelf+0x2b9a1a)
...
#15 0x00007fdae5dc209b __libc_start_main /build/glibc-B9XfQf/glibc-2.28/csu/../csu/libc-start.c:342:3
#16 0x000055f4a2db746a _start (/home/umb/LLVM/LLVM/llvm-project/build/bin/llvm-readelf+0x7b46a)
Aborted
```
I.e. it calls abort(), suggests to submit a bug report and exits with the code 134.
This patch changes the logic to propagate errors to callers.
This fixes the behavior for llvm-dwarfdump, llvm-readobj and other possible tools.
Differential revision: https://reviews.llvm.org/D79165
We might have a scenario where a the `GbuHashTable` variable correctly points
to a place inside the file (we validate this fact early in `parseDynamicTable`),
but nbuckets/maskwords fields are broken in the way the code tries
to read the data past the EOF. This patch fixes the issue.
Differential revision: https://reviews.llvm.org/D79853
Currently there is no good way to set a physical offset for a section:
* We have the `ShOffset` that allows to override the `sh_offset`, but
it does not affect the real data written.
* We can use a `Filler` to create an artificial gap, but it is more like a hack
rather than a proper solution for this problem.
This patch adds the `Offset` property which allows setting physical
offsets for sections.
It also generalizes the code, so that we set sh_offset field in one place
Differential revision: https://reviews.llvm.org/D78927
Just like on X86, we're getting reports of bogus leaks from
CoreFoundation in:
[_CFXPreferences(SourceAdditions) withSourceForIdentifier:user:byHost:container:cloud:perform:]
rdar://63238710
Currently, llvm-dwarfdump's help message has two issues.
1. Most long options are printed in `--long-option`, except for some section dumping options, e.g., `-apple-names`, `-debug-addr`.
2. Most options are printed with consistent indention, except for some section dumping options.
This patch helps resolve these two issues.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D79618
Summary: This allows DIEs with DW_AT_ranges to be encoded and decoded _and_ actually have their address ranges be included instead of having DW_AT_ranges with a section offset value for a section that doesn't exist.
Reviewers: labath, aprantl, JDevlieghere, dblaikie, probinson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78782
Summary: This implements searching for function symbols and public symbols by address.
More specifically,
-Implements NativeSession::findSymbolByAddress for function symbols and
public symbols. I think data symbols are also searched for, but isn't
implemented in this patch.
-Adds classes for NativeFunctionSymbol and NativePublicSymbol
-Adds a '-use-native-pdb-reader' option to llvm-symbolizer, for testing
purposes.
Reviewers: rnk, amccarth, labath
Subscribers: mgorny, hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79269
The internal flag -partial-profile in llvm conflicts with the flag with
the same name in llvm-profdata. The conflict happens in builds with
LLVM_LINK_LLVM_DYLIB enabled. In this case the tools are linked with libLLVM
and we end up with two definitions for the same cl::opt.
The patch renames llvm-profdata flag -partial-profile to -gen-partial-profile.
gcov 9 (r264462) started to use GCOV_TAG_OBJECT_SUMMARY. Before,
GCOV_TAG_PROGRAM_SUMMARY was used.
libclang_rt.profile should emit just one tag according to the version.
Another bug introduced by rL194499 is that the wrong runcount field was
selected.
Fix the two bugs so that gcov can correctly decode "Runs:" from
libclang_rt.profile produced .gcda files, and llvm-cov gcov can
correctly decode "Runs:" from libgcov produced .gcda files.
gcov by default prints to a .gcov file. With --stdout, stdout is used.
Some summary information is omitted. There is no separator for multiple
source files.
This fixes a bug reported by Alex Renda on LLVMDev where mca did not correctly
mark a resource group as "reserved".
(See http://lists.llvm.org/pipermail/llvm-dev/2020-May/141485.html).
The issue was caused by a wrong check in function `initializeUsedResources`.
As a consequence of this, a resource group was left unreserved, and its field
`NumUnits` incorrectly reported an unrealistic number of consumed resource
units.
This patch fixes the issue with the handling of reserved resources in the
InstrBuilder class, and adds a simple test for it. Ideally, as suggested by
Andy Trick, most of these problems will disappear if in the future we will
introduce a (optional) DelayCycles vector for SchedWriteRes.
GCDAProfiling.c unnecessarily writes function names to .gcda files.
GCC 4.2 gcc/libgcov.c (now renamed to libgcc/libgcov*) did not write function
names. gcov-7 (compatible) crashes on .gcda produced by libclang_rt.profile
rL176173 realized the problem and introduced a mode to remove function
names.
llvm-cov code apparently takes GCDAProfiling.c output format as truth
and tries to decode function names. Additionally, llvm-cov tries to
decode tags in certain order which does not match libgcov emitted .gcda
files.
This patch fixes the .gcda decoder and makes it work with GCC 8 and 9
(10 is compatible with 9). Note, line statistics are broken and not
fixed by this patch.
Add test/tools/llvm-cov/gcov-{4.7,8,9}.c to test compatibility.
It looks like that was an initial intention, but some code paths in
`DWARFExpression::Operation::extract()` did not initialize `EndOffset`
properly.
Differential Revision: https://reviews.llvm.org/D79622
Summary:
Avoid relocating DW_AT_call_pc, e.g. when a call PC is equal to the
function's low_pc as is the case in the test:
```
__Z5func1v:
0000000100007f94 b __Z5func2v
```
rdar://62952440
Reviewers: friss, JDevlieghere
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79536
This patch adds statistics about the contribution of each object file to
the linked debug info. When --statistics is passed to dsymutil, it
prints a table after linking as illustrated below.
It lists the object file name, the size of the debug info in the object
file in bytes, and the absolute size contribution to the linked dSYM and
the percentage difference. The table is sorted by the output size, so
the object files contributing the most to the link are listed first.
.debug_info section size (in bytes)
-------------------------------------------------------------------------------
Filename Object dSYM Change
-------------------------------------------------------------------------------
basic2.macho.x86_64.o 210b 165b -24.00%
basic3.macho.x86_64.o 177b 150b -16.51%
basic1.macho.x86_64.o 125b 129b 3.15%
-------------------------------------------------------------------------------
Total 512b 444b -14.23%
-------------------------------------------------------------------------------
Differential revision: https://reviews.llvm.org/D79513
This change adds tests for llvm-nm, llvm-objdump and llvm-size when dumping symbol tables with invalid sh_size (sh_size % sizeof(Elf_Sym) != 0).
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D77864
Summary: Add -detailed-summary support for sample profile dump to match that of instrumentation profile.
Reviewers: wmi, davidxl, hoyFB
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79291
This fixes a regression introduced by a very old commit 280ac1fd1d (was
llvm-svn 361950).
Commit 280ac1fd1d redesigned the logic in the LSUnit with the goal of
speeding up isReady() queries, and stabilising the LSUnit API (while also making
the load store unit more customisable).
The concept of MemoryGroup (effectively an alias set) was added by that commit
to better describe and track dependencies between memory operations. However,
that concept was not just used for alias dependencies, but it was also used for
describing memory "order" dependencies (enforced by the memory consistency
model).
Instructions of a same memory group were considered "equivalent" as in:
independent operations that can potentially execute in parallel. The problem
was that the cost of a dependency (in terms of number of cycles) should have
been different for "order" dependency. Instructions in an order dependency
simply have to have to wait until their predecessors are "issued" to an
underlying pipeline (rather than having to wait until predecessors have beeng
fully executed). For simple "order" dependencies, this was effectively
introducing an artificial delay on the "issue" of independent loads and stores.
This patch fixes the issue and adds a new test named 'independent-load-stores.s'
to a bunch of x86 targets. That test contains the reproducible posted by Fabian
Ritter on PR45793.
I had to rerun the update-mca-tests script on several files. To avoid expected
regressions on some Exynos tests, I have added a -noalias=false flag (to match
the old strict behavior on latencies).
Some tests for processor Barcelona are improved/fixed by this change and they
now show better results. In a few tests we were incorrectly counting the time
spent by instructions in a scheduler queue. In one case in particular we now
correctly see a store executed out of order. That test was affected by the same
underlying issue reported as PR45793.
Reviewers: mattd
Differential Revision: https://reviews.llvm.org/D79351
Summary:
That unless the user requested an output object (--lto-obj-path), the an
unused empty combined module is not emitted.
This changed is helpful for some target (ex. RISCV-V) which encoded the
ABI info in IR module flags (target-abi). Empty unused module has no ABI
info so the linker would get the linking error during merging
incompatible ABIs.
Reviewers: tejohnson, espindola, MaskRay
Subscribers: emaste, inglorion, arichardson, hiraditya, simoncook, MaskRay, steven_wu, dexonsmith, PkmX, dang, lenary, s.egerton, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78988
Fixes PR44357
For ARM ELF, regions covered by data mapping symbols `$d` are dumped as `.byte`, `.short` or `.word` but inline relocations are not printed. This patch merges its loop into the normal instruction printing loop so that inline relocations are printed.
Reviewed By: nickdesaulniers
Differential Revision: https://reviews.llvm.org/D79284
This addresses:
-Clean up the source code
-Refactor the JSON fields
-Fix the test cases
-Improve the docs for the stats output
Differential Revision: https://reviews.llvm.org/D77789
N_PEXT bit should not affect whether a symbol is considered to be external or not.
This also fixes the construction of the symbol table since it relies on the correct
ordering of symbols.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D78888
After SHF_ALLOC sections are ordered by LMA:
* If initial sections are empty, GNU objcopy skips their contents while we
emit leading zeros. (binary-paddr.test %t4)
* If trailing sections are empty, GNU objcopy skips their contents while we
emit trailing zeros. (binary-paddr.test %t5)
This patch matches GNU objcopy's behavior. Linkers don't keep p_memsz
PT_LOAD segments. Such empty sections would not have a containing
PT_LOAD and `Section::ParentSegment` might be null if linkers fail to
optimize the file offsets (lld D79254).
In particular, without D79254, the arm Linux kernel's multi_v5_defconfig
depends on this behavior: in `vmlinux`, an empty .text_itcm is mapped at
a very high address (0xfffe0000) but the kernel does not expect
`objcopy -O binary` to create a very large `arch/arm/boot/Image`
(0xfffe0000-0xc0000000 ~= 1GiB). See https://bugs.llvm.org/show_bug.cgi?id=45632
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D79229
We do not verify the p_offset of the PT_INTERP header and tool may
crash when a program interpreter name string goes past the end of the file.
Differential revision: https://reviews.llvm.org/D79013
gnu-phdrs.test uses 2 precompiled objects and has issues:
* It does not test all possible program headers.
* It does not test target-specific headers (arm, mips).
* It does not use --strict-whitespace --match-full-line to check the format of the output.
* It is possible to check things better/nicer.
* It also tests --section-mapping.
This patch makes gnu-phdrs.test to stop using binaries and addresses issues above.
It splits --section-mapping testing to gnu-section-mapping.test
I am going to use it as a base for a follow-up patch that should also test
section to segment mapping conditions that we currently have
(see the discussion in D78709)
Differential revision: https://reviews.llvm.org/D78805
Summary:
Add a new option (/llvmlibempty). If passed and llvm-lib does not give an error, it will create a valid output archive even if empty.
By default, llvm-lib mimicks lib.exe: if given no input files, it doesn't create its output file at all. This is incompatible with some build systems, so we add a command-line option to toggle this compatibility behavior.
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D78894
The debug directory payload is not located directly after the
debug directory entry itself, but can essentially be located anywhere
in the binary (even outside of mapped sections, although we don't
handle that case).
Differential Revision: https://reviews.llvm.org/D78921
According to the spec, the payload for debug directories can be
in parts of the binary that aren't mapped at runtime - in these
cases, AddressOfRawData is just set to zero.
Differential Revision: https://reviews.llvm.org/D78920
Fix handling of relocations with r_extern == 0.
If r_extern == 0 then r_symbolnum is an index of a section rather than a symbol index.
Patch by Seiya Nuta and Alexander Shaposhnikov.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D78946
Until recently yaml2obj didn't properly support relocations for MachO.
This behavior resulted in binaries having invalid relocations.
In this diff we adjust the existing tests as follows:
for the tests which don't actually look at any relocations they are removed,
for the tests which essentially depend on relocations they are fixed.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D78898
D63847 added `MCInstrAnalysis::evaluateMemoryOperandAddress()`. This patch
leverages the feature to print the target addresses for evaluable instructions.
```
-400a: movl 4080(%rip), %eax
+400a: movl 4080(%rip), %eax # 5000 <data1>
```
This patch also deletes `MIA->isCall(Inst) || MIA->isUnconditionalBranch(Inst) || MIA->isConditionalBranch(Inst)`
which is used to guard `MCInstrAnalysis::evaluateBranch()`
Reviewed By: jhenderson, skan
Differential Revision: https://reviews.llvm.org/D78776
This diff fixes the calculation of the field vmsize
in LC_SEGMENT/LC_SEGMENT_64 load commands.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D78799
The library can parse DWARFv5 unit index sections of DWP files, but
llvm-dwp is not ready to process them. Refuse such input files for now.
Differential Revision: https://reviews.llvm.org/D77143
Currently we have computations of `p_filesz` and `p_memsz` mixed together
with the use of a loop over fragments. After recent changes it is possible to
avoid using a loop for the computation of `p_filesz`, since we know that fragments
are sorted by their file offsets.
The main benefit of this change is that splits the computation of `p_filesz`
and `p_memsz` what is simpler and allows us to fix the computation of the
`p_memsz` independently (D78005 shows the issue that we have currently).
Differential revision: https://reviews.llvm.org/D78628
LC_LOAD_WEAK_DYLIB is analogous to LC_LOAD_DYLIB and doesn't require any special handling.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D78602
We now use the argparse Action objects to determine the name of the flags.
This fixes cases where the key for the stored result ('dest') is not the
same as the command line flag (e.g. --enable/--disable).
Also add a test that --disabled can be part of the initial UTC_ARGS.
This is split out from D78478
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D78617
Make --remove-section clean up dead symbols, return an Error if it can't be safely done.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D78474
Prior to this patch, llvm-objdump would only look in the last section
(according to the section header table order) that matched an address
for a symbol when identifying the target symbol of a call or branch
operation. If there are multiple sections with the same address, due to
some of them being empty, it did not look in those, even if the symbol
couldn't be found in the first section looked in.
This patch causes llvm-objdump to look in all sections for possible
candidate symbols. If there are multiple possible symbols, it picks one
from a non-empty section, if possible (as that is more likely to be the
"real" symbol since functions can't really be in emptiy sections),
before falling back to those in empty sections. If all else fails, it
falls back to absolute symbols as it did before.
Differential Revision: https://reviews.llvm.org/D78549
Reviewed by: grimar, Higuoxing
The `Offset` field is used to set the file offset of a program header.
In a normal object it should not be greater than the minimal offset
of sections included into segment.
This patch adds a check for that and adds tests.
Differential revision: https://reviews.llvm.org/D78304
Summary:
Without this we could silently accept an invalid prologue because the
default DataExtractor behavior is to return an empty string when
reaching the end of file. And empty string is also used to terminate
these lists.
This makes the parsing code slightly more complicated, but this
complexity will go away once the parser starts working with truncating
data extractors. The reason I am doing it this way is because without
this, the truncation would regress the quality of error messages (right
now, we produce bad error messages only near EOF, but truncation would
make everything behave as if it was near EOF).
Reviewers: dblaikie, probinson, jhenderson
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77555
This validates that sections listed for a segment in the YAML
declaration are ordered by their file offsets.
It might help to simplify the file size computation, but also
is useful by itself as helps to avoid issues in test cases and
to maintain their readability.
Differential revision: https://reviews.llvm.org/D78361
Don't error on Config.KeepFileSymbols for COFF and Mach-O.
Original description:
GNU objcopy removes STT_FILE symbols for strip-debug operations, and
keeps them for --discard-all operation. Match their behaviour for
llvm-objcopy.
Bug: https://github.com/android/ndk/issues/1212
Differential Revision: https://reviews.llvm.org/D76675
SHT_NOBITS are a bit special because occupy no physical space.
This patch adds support for them.
Differential revision: https://reviews.llvm.org/D77805
There are cases when we either might print garbage or crash when
reading strings for dumping dynamic tags.
For example when a string table is not null-terminated or goes past the EOF.
This patch fixes issues mentioned.
Differential revision: https://reviews.llvm.org/D77216
Currently C++ symbols are demangled in the symbol table as well as in
the disassembly and relocations. This patch adds demangling of C++
symbols in targets of calls and branches making it easier to decipher
control flow in disassembly. This also matches up with GNUobjdump's
behavior
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D77957
There is no need to use `--check-prefix` multiple times.
It helps to improve readability/test maintainability.
This patch does it for all tools at once.
Differential revision: https://reviews.llvm.org/D78217
These two tests utilize pre-generated opt-viewer output to diff against
a run of opt-viewer over a known yaml file.
In commit 4b428e8f (D76126), the escape function used for rendering was changed
from cgi.escape to html.escape. This modification causes a behavioral
difference with regards to quote characters.
cgi will not escape quotes by default, but html will.
Therefore, these tests were failing because they expected the old behavior
of "string", but was instead seeing "string".
This solution modifies the known test outputs to use the escaped quotes
rather than not escaping quotes during rendering for no particular reason.
It is notable that when testing the optimization records generated by
LLVM, there was never quotes in the remarks I could find, specifically in
the Callee field where they exist in the pre-generated yaml for testing.
Differential Revision: https://reviews.llvm.org/D78241
Summary:
This matches the behavior of GNU addr2line. We previously treated
hexadecimal addresses as binary if they started with 0b, otherwise as
octal if they started with 0, otherwise as decimal.
This only affects llvm-addr2line; the behavior of llvm-symbolize is
unaffected.
Reviewers: ikudrin, rupprecht, jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73306
Imagine we have the following invocation:
`FileCheck -check-prefix=UNKNOWN-PREFIX -implicit-check-not=something`
When the check prefix does not exist it does not fail.
This patch fixes the issue.
Differential revision: https://reviews.llvm.org/D78024
Originally committed as 416fa7720e
Reverted (due to buildbot failure - breaking lldb) in 7a45aeacf3.
I still can't seem to build lldb locally, but Pavel Labath has kindly
provided a potential fix to preserve the old behavior in lldb by
registering a simple recoverable error handler there that prints to the
desired stream in lldb, rather than stderr.
Summary:
Without that we could be silently reading zeroes, as that's the default
DataExtractor behavior. The entire parse would still most likely fail,
but it would do that with a seemingly unrelated/nonsensical error
message.
Reviewers: dblaikie, probinson, jhenderson
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77554
Address post-commit comment:
https://reviews.llvm.org/D77580#inline-713676
yaml2obj does not record the source filename in the output,
which may make FileCheck tests brittle sometimes.
Rename extract-instrmap-aarch64.test to extract-instrmap.test because
the path component `AArch64` conveys the target name clearly.
Additionally, adopt a convention we start to use in LLVM binary
utilities: prepend `#` to CHECK/RUN lines and `##` to comment lines even
if the file contains no code. The notation makes CHECK/RUN/comments
stand out.
Reviewed By: dberris
Differential Revision: https://reviews.llvm.org/D77883
This patch intends to fix incomplete relocation printing for
XCOFF (potentially for other targets).
Differential Revision: https://reviews.llvm.org/D77580
This probably isn't ideal - the error was being printed specifically
inline with the dumping that was more legible - but then the error
wasn't reported to stderr and didn't produce a non-zero exit code.
Probably the error message could be improved by adding more context now
that it isn't printed in-situ of the DIE dumping as much.
Makes it easier to test "this doesn't produce an error" (& indeed makes
that the implied default so we don't accidentally write tests that have
silent/sneaky errors as well as the positive behavior we're testing for)
Though the support for applying relocations is patchy enough that a
bunch of tests treat lack of relocation application as more of a warning
than an error - so rather than me trying to figure out how to add
support for a bunch of relocation types, let's degrade that to a warning
to match the usage (& indeed, it's sort of more of a tool warning anyway
- it's not that the DWARF is wrong, just that the tool can't fully cope
with it - and it's not like the tool won't dump the DWARF, it just won't
follow/render certain relocations - I guess in the most general case it
might try to render an unrelocated value & instead render something
bogus... but mostly seems to be about interesting relocations used in
eh_frame (& honestly it might be nice if we were lazier about doing this
relocation resolution anyway - if you're not dumping eh_frame, should we
really be erroring about the relocations in it?))
The R_AARCH64_PLT32 relocation type will be documented in the next release
of ELF for the 64-bit Arm Architecture. It is being added in draft state
for the benefit of the position independent vtable feature.
R_AARCH64_PLT32 is very similar to R_AARCH64_PREL32. The intention is to
provide a signed 32-bit integer representing an offset from the place
to a function.
- It relocates 32-bit data
- The expression is S + A - P
- The overflow check for the expression is -2^31 <= X < 2^31
- The relocation generates Thunks/Veneers/Stubs and PLT entries as per
R_AArch64_CALL26
- If the symbol S is an undefined weak the ABI does not define its value.
The ABI defines a code for ilp32 for completeness, I have added the code
but have only added to the existing reloc-types-elf-aarch64.text as there
is no ilp32 equivalent.
Differential Revision: https://reviews.llvm.org/D77647
When two sections shared the same address, the disassembly code was
using pointer values when sorting (see the SectionRef less than
operator). Since those values aren't guaranteed to have a specific
order, this meant the disassembly code would sometimes change which
section to pick when finding symbols targeted by calls in fully linked
objects.
This change fixes the non-determinism, so that the same section is
always picked. This might have a negative impact in that now a section
without any symbol might be picked over a section with symbols, but this
will be addressed in a later commit.
Fixes https://bugs.llvm.org/show_bug.cgi?id=45411.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D77640
Fix the error of show-prof-info.test on some platforms without zlib.
The common profile usage is to collect profile from a target and then use the profile to guide the optimized build for the same target. There are some cases that no profile can be collected for a target. In those cases, although no full profile is available, it is possible to have some partial profile collected from other targets to optimize common libraries and utilities. A flag is needed to tell the partial profile from the full profile apart, so compiler can use different strategy for them.
Differential Revision: https://reviews.llvm.org/D77426
The common profile usage is to collect profile from a target and then use the profile to guide the optimized build for the same target. There are some cases that no profile can be collected for a target. In those cases, although no full profile is available, it is possible to have some partial profile collected from other targets to optimize common libraries and utilities. A flag is needed to tell the partial profile from the full profile apart, so compiler can use different strategy for them.
Differential Revision: https://reviews.llvm.org/D77426
Currently we have no dedicated warnings, but we return error message instead of a result.
It is generally not consistent with another warnings we have.
This change was suggested and discussed here:
https://reviews.llvm.org/D77216#1954873
This change refines error messages we report and also I had to update the API
to implement it.
Differential revision: https://reviews.llvm.org/D77399
SUMMARY:
For the llvm-objdump -D, the symbol name is used as a label in the disassembly for the specific address (when a symbol address is equal to the virtual address in the dump).
In XCOFF, multiple symbols may have the same name, being differentiated by their storage mapping class. It is helpful to print the QualName and not just the name when forming the output label for a csect symbol. The symbol index further removes any ambiguity caused by duplicate names.
To maintain compatibility with the binutils objdump, the XCOFF-specific --symbol-description option is added to enable the enhanced format.
Reviewers: hubert.reinterpretcast, James Henderson, Jason Liu ,daltenty
Subscribers: wuzish, nemanjai, hiraditya
Differential Revision: https://reviews.llvm.org/D72973
llvm-readobj prints the file path as part of the output, so
--implicit-check-not patterns can accidentally match it. This patch
makes the test more robust by preventing failures if "foo" is in
somebody's path.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D77546
llvm-dwp did not check section identifiers read from input files.
In the case of an unexpected identifier, the calculated index for
Contributions[] pointed outside the array. This fix avoids the issue
by skipping unsupported identifiers.
Differential Revision: https://reviews.llvm.org/D76543
Summary:
This patch is to teach `llvm-objdump` dump dynamic symbols (`-T` and `--dynamic-syms`). Currently, this patch is not fully compatible with `gnu-objdump`, but I would like to continue working on this in next few patches. It has two issues.
1. Some symbols shouldn't be marked as global(g). (`-t/--syms` has same issue as well) (Fixed by D75659)
2. `gnu-objdump` can dump version information and *dynamically* insert before symbol name field.
`objdump -T a.out` gives:
```
DYNAMIC SYMBOL TABLE:
0000000000000000 w D *UND* 0000000000000000 _ITM_deregisterTMCloneTable
0000000000000000 DF *UND* 0000000000000000 GLIBC_2.2.5 printf
0000000000000000 DF *UND* 0000000000000000 GLIBC_2.2.5 __libc_start_main
0000000000000000 w D *UND* 0000000000000000 __gmon_start__
0000000000000000 w D *UND* 0000000000000000 _ITM_registerTMCloneTable
0000000000000000 w DF *UND* 0000000000000000 GLIBC_2.2.5 __cxa_finalize
```
`llvm-objdump -T a.out` gives:
```
DYNAMIC SYMBOL TABLE:
0000000000000000 w D *UND* 0000000000000000 _ITM_deregisterTMCloneTable
0000000000000000 g DF *UND* 0000000000000000 printf
0000000000000000 g DF *UND* 0000000000000000 __libc_start_main
0000000000000000 w D *UND* 0000000000000000 __gmon_start__
0000000000000000 w D *UND* 0000000000000000 _ITM_registerTMCloneTable
0000000000000000 w DF *UND* 0000000000000000 __cxa_finalize
```
Reviewers: jhenderson, grimar, MaskRay, espindola
Reviewed By: jhenderson, grimar
Subscribers: emaste, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75756
Summary:
Note: This revision is very similar to D62296.
In D75756, we need `getDynamicSymbolIterators()` to skip first NULL symbol in `.dynsym`. And I believe it might be worth pointing this out in a separate patch to gather you experts' opinions.
I have checked that current code base will not be affected by this change.
```
dynamic_symbol_begin()
|- dynamic_symbol_end(): Ok
`- getDynamicSymbolIterators()
|- addDynamicElfSymbols(): llvm/tools/llvm-objdump/llvm-objdump.cpp, Line 934
| Ok, NULL symbol will be omitted by Line 945-947
| StringRef Name = unwrapOrError(Symbol.getName(), Obj->getName());
| if (Name.empty()) continue;
|- dumpSymbolNameFromObject(): llvm/tools/llvm-nm/llvm-nm.cpp, Line 1192
| There's no test for dumping dynamic debugging symbol. This patch helps improve llvm-nm behavior. (we should add test for this later)
`- computeSymbolSizes(): llvm/lib/Object/SymbolSize.cpp, Line 52
|- OProfileJITEventListener::notifyObjectLoaded(): llvm/lib/ExecutionEngine/OProfileJIT/OProfileJITEventListener.cpp, Line 92
| Ok, NULL symbol will be omitted by Line 94-95
| if (!Sym.getType() || *Sym.getType() != SF_Function) continue;
|- IntelJITEventListener::notifyObjectLoaded(): llvm/lib/ExecutionEngine/IntelJITEvents/IntelJITEventListener.cpp, Line 98
| Ok, NULL symbol will be omitted by Line 124-126 (same as previous one)
|- PerfJITEventListener::notifyObjectLoaded(): llvm/lib/ExecutionEngine/PerfJITEvents/PerfJITEventListener.cpp, Line 244
| Ok, NULL symbol will be omitted by Line 254-256, (same as previous one)
|- SymbolizableObjectFile::create(): llvm/lib/DebugInfo/Symbolize/SymbolizableObjectFile.cpp, Line 73
| Ok, NULL symbol will be omitted by Line 75
| res->addSymbol()
| In addSymbol(), Line 167-168
| if (!Sec || (Obj && Obj->section_end() == *Sec)) return std::error_code();
|- dumpCXXData(): llvm/tools/llvm-cxxdump/llvm-cxxdump.cpp, Line 189
| Ok, NULL symbol will be omitted by Line 199-202
| object::section_iterator SecI = *SecIOrErr;
| // Skip external symbols.
| if (SecI == Obj->section_end())
| continue;
`- printLineInfoForInput(): llvm/tools/llvm-rtdyld/llvm-rtdyld.cpp, Line 418
Ok, NULL symbol will be omitted by Line 430-477
if (Type == object::SymbolRef::ST_Function) {
...
}
```
Reviewers: grimar, jhenderson, MaskRay
Reviewed By: jhenderson, MaskRay
Subscribers: rupprecht, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76081
Add an option to llvm-dwarfdump to calculate the bytes within
the debug sections. Dump this numbers when using --statistics
option as well.
This is an initial patch (e.g. we should support other units,
since we only support 'bytes' now).
Differential Revision: https://reviews.llvm.org/D74205
While D68850 allowed functions to be deleted I accidentally saved some
version of the function to be used once a suitable prefix was found.
This turned out to be problematic when the occasionally deleted function
is also occasionally modified. The test case is adjusted to resemble the
case in which the problem was found.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D76586
We have scenarios when the logic of --elf-hash-histogram/--hash-symbols/--hash-table
options might crash when given a broken hash table.
This patch adds pre-checks for tables for these 3 options
and provides test cases.
Differential revision: https://reviews.llvm.org/D77147
Prior to this change the clang interface stubs format resembled
something ending with a symbol list like this:
Symbols:
a: { Type: Func }
This was problematic because we didn't actually want a map format and
also because we didn't like that an empty symbol list required
"Symbols: {}". That is to say without the empty {} llvm-ifs would crash
on an empty list.
With this new format it is much more clear which field is the symbol
name, and instead the [] that is used to express an empty symbol vector
is optional, ie:
Symbols:
- { Name: a, Type: Func }
or
Symbols: []
or
Symbols:
This further diverges the format from existing llvm-elftapi. This is a
good thing because although the format originally came from the same
place, they are not the same in any way.
Differential Revision: https://reviews.llvm.org/D76979
Summary:
When we encounter an XCOFF file, reflect that in the triple information.
In addition to knowing the object file format, we know that the
associated OS is AIX.
This means that we can expect that there is no output difference in the
processing of an XCOFF32 input file between cases where the triple is
left unspecified by the user and cases where the user specifies
`--triple powerpc-ibm-aix` explicitly.
Reviewers: jhenderson, sfertile, jasonliu, daltenty
Reviewed By: jasonliu
Subscribers: wuzish, nemanjai, hiraditya, MaskRay, rupprecht, steven.zhang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77025
Leverage ARM ELF build attribute section to create ELF attribute section
for RISC-V. Extract the common part of parsing logic for this section
into ELFAttributeParser.[cpp|h] and ELFAttributes.[cpp|h].
Differential Revision: https://reviews.llvm.org/D74023
Compbinary format uses MD5 to represent strings in name table. That gives smaller profile without the need of compression/decompression when writing/reading the profile. The patch adds the support in extbinary format. It is off by default but user can choose to enable it.
Note the feature of using MD5 in name table can bring very small chance of name conflict leading to profile mismatch. Besides, profile using the feature won't have the profile remapping support.
Differential Revision: https://reviews.llvm.org/D76255
I got a report recently that a user was having trouble interpreting the
meaning of the error message. Hopefully this is more readable; produces
something like the following:
error: No such file or directory: Could not read profile data!
Differential Revision: https://reviews.llvm.org/D76796
This test missed the check of histograms printed for .hash sections.
It was removed by mistake in D71606 where I tried to get rid of precompiled objects
and did not realize that time that both SHT_GNU_HASH and SHT_HASH sections
were tested and not just GNU version.
Also it never tested aliases for the --elf-hash-histogram option.
Differential revision: https://reviews.llvm.org/D76920
We are able to reduce `-DBITS=32/64` to reduce this test case.
I've rewrote the comments we had to generalize them and
fix wrong computations they contained.
Differential revision: https://reviews.llvm.org/D76924
This seems to be used in some resource files, e.g.
f3217573d7/include/wx/msw/wx.rc (L28).
MSVC rc.exe and GNU windres both allow any value here, and silently
just truncate to uint16_t range. This just explicitly allows the
-1 value and errors out on others - the same was done for control
IDs in dialogs in c1a67857ba.
Differential Revision: https://reviews.llvm.org/D76951
Currently -fno-unroll-loops is ignored when doing LTO on Darwin. This
patch adds a new -lto-no-unroll-loops option to the LTO code generator
and forwards it to the linker if -fno-unroll-loops is passed.
Reviewers: thegameg, steven_wu
Reviewed By: thegameg
Differential Revision: https://reviews.llvm.org/D76916
Summary:
Implement several XCOFF hooks to get '-r' option working for llvm-objdump -r.
Reviewer: DiggerLin, hubert.reinterpretcast, jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D75131
We might have a crash scenario when we have an invalid DT_STRTAB value
that is larger than the file size. I've added a test case to demonstrate.
Differential revision: https://reviews.llvm.org/D76706
```
// llvm-objdump -d output (before)
0: bl .-4
4: bl .+0
8: bl .+4
// llvm-objdump -d output (after) ; GNU objdump -d
0: bl 0xfffffffc / bl 0xfffffffffffffffc
4: bl 0x4
8: bl 0xc
```
Many Operand's are not annotated as OPERAND_PCREL.
They are not affected (e.g. `b .+67108860`). I plan to fix them in future patches.
Modified test/tools/llvm-objdump/ELF/PowerPC/branch-offset.s to test
address space wraparound for powerpc32 and powerpc64.
Reviewed By: sfertile, jhenderson
Differential Revision: https://reviews.llvm.org/D76591
```
// llvm-objdump -d output (before)
400000: e8 0b 00 00 00 callq 11
400005: e8 0b 00 00 00 callq 11
// llvm-objdump -d output (after)
400000: e8 0b 00 00 00 callq 0x400010
400005: e8 0b 00 00 00 callq 0x400015
// GNU objdump -d. The lack of 0x is not ideal because the result cannot be re-assembled
400000: e8 0b 00 00 00 callq 400010
400005: e8 0b 00 00 00 callq 400015
```
In llvm-objdump, we pass the address of the next MCInst. Ideally we
should just thread the address of the current address, unfortunately we
cannot call X86MCCodeEmitter::encodeInstruction (X86MCCodeEmitter
requires MCInstrInfo and MCContext) to get the length of the MCInst.
MCInstPrinter::printInst has other callers (e.g llvm-mc -filetype=asm, llvm-mca) which set Address to 0.
They leave MCInstPrinter::PrintBranchImmAsAddress as false and this change is a no-op for them.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D76580
to remap object file paths (but no source paths) before
processing. This is meant to be used for Clang objects where the
module cache location was remapped using ``-fdebug-prefix-map``; to
help dsymutil find the Clang module cache.
<rdar://problem/55685132>
Differential Revision: https://reviews.llvm.org/D76391
Record the address of a tail-calling branch instruction within its call
site entry using DW_AT_call_pc. This allows a debugger to determine the
address to use when creating aritificial frames.
This creates an extra attribute + relocation at tail call sites, which
constitute 3-5% of all call sites in xnu/clang respectively.
rdar://60307600
Differential Revision: https://reviews.llvm.org/D76336
Summary:
The directory_count and file_name_count fields are (section 6.2.4 of
DWARF5 spec) supposed to be uleb128s, not bytes. This bug meant that it
was not possible to correctly parse headers with more than 128 files or
directories.
I've found this bug by code inspection, though the limit is so small
someone would have run into it for real sooner or later. I've verified
that the producer side handles many files correctly, and that we are
able to parse such files after this fix.
Reviewers: dblaikie, jhenderson
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76498
Debian and some other distributions install llvm-strip as llvm-strip-$major (e.g. `/usr/bin/llvm-strip-9`)
D54193 made it work with llvm-strip-$major but did not add a test.
The behavior was regressed by D69146.
Fixes https://github.com/ClangBuiltLinux/linux/issues/940
Reviewed By: alexshap
Differential Revision: https://reviews.llvm.org/D76562
If the section headers have been removed by a tool such as llvm-objcopy
or llvm-strip, previously llvm-readobj/llvm-readelf would not dump the
dynamic symbols when --dyn-symbols was specified. However, the nchain
value of the DT_HASH data specifies the number of dynamic symbols, so if
it is present, we can use that. This patch implements this behaviour.
Fixes https://bugs.llvm.org/show_bug.cgi?id=45089.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D76352
Summary:
When using full LTO on cross-compile settings, instead of generating the
default archive kind of the host platform, we could deduce the archive
kind based on the target triple.
This specifically addresses https://github.com/android/ndk/issues/1209
by making it possible to drop llvm-ar in place of GNU ar without extra
flags.
Reviewers: compnerd, pcc, srhines, danalbert
Subscribers: hiraditya, MaskRay, steven_wu, dexonsmith, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76461
Prior to this change, for non-relocatable objects llvm-readobj would
assume that all symbols that corresponded to a stack size section's
entries were in the section specified by the section's sh_link field.
In the presence of an output section description combining
SHF_LINK_ORDER sections linking different output sections, this cannot
be respected, since linker script section patterns are "by name" by
nature. Consequently, the sh_link value would not be correct for all
section entries.
This patch changes llvm-readobj to ignore the section of symbols in a
non-relocatable object.
Fixes https://bugs.llvm.org/show_bug.cgi?id=45228.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D76425
Seems we do not test how we print relocation addends well.
And the behavior of dumpers does not seem to be ideal here
(and llvm-readelf does not match GNU as the test case shows).
This patch adds a test case to document the current behavior.
Differential revision: https://reviews.llvm.org/D75671
A number of X86 tests were accidentally disabled in
https://reviews.llvm.org/D73568. This commit re-enables those tests.
```
$ for x86_test in $(gg 'REQUIRES: x86$' llvm/test | fst); do sed -i "" '/REQUIRES: x86/d' $x86_test; done
```
(Note that 'x86' is not an available feature, that's what caused the
tests to be disabled.)
Currently obj2yaml always emits the `EntSize` property when `sh_entsize != 0`.
It is not correct. For example, for `SHT_DYNAMIC` section, `EntSize == 0`
is abnormal, while `sizeof(ELFT::Dyn)` is the expected default.
To reduce the output produces we should not dump default values.
yaml2obj tests that shows `sh_entsize` values produced are:
1) For `SHT_REL*` sections: `yaml2obj\ELF\reloc-sec-entry-size.yaml`
2) For `SHT_DYNAMIC`: `yaml2obj\ELF\dynamic-section.yaml`
Differential revision: https://reviews.llvm.org/D76227
We do not have tests that shows the current behavior.
It is needed for D76227 which changes the logic of dumping of `EntSize` fields.
Differential revision: https://reviews.llvm.org/D76282
We usually start error messages with lowercase letters and most of them
in llvm-dwp follow that rule. This patch fixes a few messages that
started with capital letters.
Differential revision: https://reviews.llvm.org/D76277
`.rela.dyn` is a dynamic relocation section that normally has
no value in `sh_info` field.
The existent `elf-reladyn-section-shinfo.yaml` which tests this piece has issues:
1) It does not check the case when we have more than one `SHT_REL[A]`
section with `sh_info == 0` in the object. Because of this it did not catch the issue.
Currently we print an excessive "Info" field:
```
- Name: .rela.dyn
Type: SHT_RELA
EntSize: 0x0000000000000018
- Name: .rel.dyn
Type: SHT_REL
EntSize: 0x0000000000000010
Info: ' [1]'
```
2) It seems can be more generic. I've added a `rel-rela-section.yaml` instead.
Differential revision: https://reviews.llvm.org/D76281
This patch makes `Relocation::Addend` to be `ELFYAML::YAMLIntUInt` and not `int64_t`.
`ELFYAML::YAMLIntUInt` it is a new type and it has the following benefits/features:
1) For an 64-bit object any hex/decimal addends
in the range [INT64_MIN, UINT64_MAX] is accepted.
2) For an 32-bit object any hex/decimal addends
in range [INT32_MIN, UINT32_MAX] is accepted.
3) Negative hex numbers like -0xffffffff are not accepted.
4) It is printed as decimal. I.e. obj2yaml will print
something like "Addend: 125", this matches the current behavior.
This fixes all FIXMEs in `relocation-addend.yaml`.
Differential revision: https://reviews.llvm.org/D75527
This test uses a precompiled object and duplicates
the functionality of a modern elf-no-symtab.yaml test that
uses yaml2obj for producing inputs.
Differential revision: https://reviews.llvm.org/D76217
This is a follow-up for D75608.
The `Offset` property is unused and can be removed to reduce tests.
This patch does nothing with `reloc-types-elf-i386.test` which has a different
structure and kind of tests the `Offset`. I think we might want to split it probably.
Differential revision: https://reviews.llvm.org/D76195
Follow-up for D74433
What the function returns are almost standard BFD names, except that "ELF" is
in uppercase instead of lowercase.
This patch changes "ELF" to "elf" and changes ARM/AArch64 to use their BFD names.
MIPS and PPC64 have endianness differences as well, but this patch does not intend to address them.
Advantages:
* llvm-objdump: the "file format " line matches GNU objdump on ARM/AArch64 objects
* "file format " line can be extracted and fed into llvm-objcopy -O literally.
(https://github.com/ClangBuiltLinux/linux/issues/779 has such a use case)
Affected tools: llvm-readobj, llvm-objdump, llvm-dwarfdump, MCJIT (internal implementation detail, not exposed)
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D76046
These tests passed in my Windows 10 VM, but are failing on Windows bots
with errors which look related to unicode encodings. Disable the tests
on Windows for now.
Summary:
This is a preparatory change for allowing LLVM to emit DW_OP_convert
operations converting to the generic type.
If DW_OP_convert's operand is 0, it converts the top of the stack to the
generic type, as specified by DWARFv5 section 2.5.1.6:
"[...] takes one operand, which is an unsigned LEB128 integer that
represents the offset of a debugging information entry in the current
compilation unit, or value 0 which represents the generic type."
This adds support for such operations to dsymutil.
Reviewers: aprantl, markus, friss, JDevlieghere
Reviewed By: aprantl, JDevlieghere
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D76142
This adds the --debug-vars option to llvm-objdump, which prints
locations (registers/memory) of source-level variables alongside the
disassembly based on DWARF info. A vertical line is printed for each
live-range, with a label at the top giving the variable name and
location, and the position and length of the line indicating the program
counter range in which it is valid.
Currently, this only works for object files, not executables or shared
libraries.
Differential revision: https://reviews.llvm.org/D70720
Summary:
This is a preparatory change for allowing LLVM to emit DW_OP_convert
operations converting to the generic type.
If DW_OP_convert's operand is 0, it converts the top of stack to the
generic type, as specified by DWARFv5 section 2.5.1.6:
"[...] takes one operand, which is an unsigned LEB128 integer that
represents the offset of a debugging information entry in the current
compilation unit, or value 0 which represents the generic type."
This adds support for such operations to llvm-dwarfdump.
Reviewers: aprantl, markus, jdoerfert, jhenderson
Reviewed By: aprantl
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D76141
`PAddr` corresponds to `p_paddr` of a program header, which is the segment's physical
address for systems in which physical addressing is relevant. `p_paddr` is often equal
to `p_vaddr`, which is the virtual address of a segment.
This patch changes the default for `PAddr` from 0 to a value of `VAddr`.
Differential revision: https://reviews.llvm.org/D76131
GCC when configured with --enable-gnu-unique (default on glibc>=2.11)
emits STB_GNU_UNIQUE for certain objects which are otherwise emitted as
STT_OBJECT, such as an inline function's static local variable or its
guard variable, and a static data member of a template.
Clang does not implement -fgnu-unique.
Implementing it as a binding is strange and the feature itself is
considered by some as a misfeature.
Reviewed By: grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D75797
Merge symbol-table-elf.test and common-symbol-elf.test, and add some
more tests (invalid st_type, STT_COMMON, STT_GNU_IFUNC, STT_HIOS, STT_LOPROC, SHN_UNDEF, SHN_ABS, SHN_COMMON, STB_GNU_UNIQUE, invalid binding, etc) to test/llvm-objdump/ELF/symbol-table.test
The naming follows test/llvm-{readobj,objcopy}/ELF .
Some discrepancy from GNU objdump:
* STT_COMMON: can be produced with `ld.bfd -r -z common`, but it almost never exists in practice
* STT_GNU_IFUNC: will be fixed by D75793
* STB_GNU_UNIQUE: will be fixed by D75797
* STT_TLS: GNU objdump does not print 'O'
* unknown binding: GNU objdump does not print 'g'. This probably does not matter.
* A reserved symbol index is displayed as *ABS* in GNU objdump. It is not clear what we should print.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D75796
We had no test for `Addend` field of a relocation. Though the
current behavior is not ideal and might need to be fixed.
This patch adds 2 test cases to document the current
behavior and add a few FIXMEs. These FIXME are fixed in the
follow-up: https://reviews.llvm.org/D75527
Differential revision: https://reviews.llvm.org/D75528
Currently `yaml2obj` require `Offset` field in a relocation description.
There are many cases when `Offset` is insignificant in a context of a test case.
Making `Offset` optional allows to simplify our test cases.
This is what this patch does.
Also, with this patch `obj2yaml` does not dump a zero offset of a relocation.
Differential revision: https://reviews.llvm.org/D75608
The intention was to remove the `Object/X86/yaml-elf-x86-rel-broken.yaml test`,
This test is at the wrong place.
`yaml-elf-x86-rel-broken.yaml` was introduced in
rG892c6c86ea25dc97668ff1f1b7bf1108e85fa5ec to check that
yaml2obj can use an arbitrary `Hex32` value as a relocation type.
We have tests that check the similar functionality.
I've improved them and removed the `yaml-elf-x86-rel-broken.yaml`
Differential revision: https://reviews.llvm.org/D75679
The new behavior matches GNU objdump. A pair of angle brackets makes tests slightly easier.
`.foo:` is not unique and thus cannot be used in a `CHECK-LABEL:` directive.
Without `-LABEL`, the CHECK line can match the `Disassembly of section`
line and causes the next `CHECK-NEXT:` to fail.
```
Disassembly of section .foo:
0000000000001634 .foo:
```
Bdragon: <> has metalinguistic connotation. it just "feels right"
Reviewed By: rupprecht
Differential Revision: https://reviews.llvm.org/D75713
This fixes several issues. The behavior changes are:
A SHN_COMMON symbol does not have the 'g' flag.
An undefined symbol does not have 'g' or 'l' flag.
A STB_GLOBAL SymbolRef::ST_Unknown symbol has the 'g' flag.
A STB_LOCAL SymbolRef::ST_Unknown symbol has the 'l' flag.
Reviewed By: rupprecht
Differential Revision: https://reviews.llvm.org/D75659
This changes the output of `llvm-readelf -n` from:
```
Displaying notes found at file offset 0x<...> with length 0x<...>:
```
to:
```
Displaying notes found in: .note.foo
```
And similarly, adds a `Name:` field to the `llvm-readobj -n` output for notes.
This change not only increases GNU compatibility, it also makes it much easier to read notes. Note that we still fall back to printing the file offset/length in cases where we don't have a section name, such as when printing notes in program headers or printing notes in a partially stripped file (GNU readelf does the same).
Fixes llvm.org/PR41339.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D75647
This fixes printing long values that might reside in CIE and FDE,
including offsets, lengths, and addresses.
Differential Revision: https://reviews.llvm.org/D73887
Summary:
Move the check for malformed REBASE_OPCODE_ADD_ADDR_IMM_SCALED and
BIND_OPCODE_DO_BIND_ADD_ADDR_IMM_SCALED opcodes after the immediate
has been applied to the SegmentOffset. This fixes specious errors
where SegmentOffset is pointing between two sections when trying to
correct the SegmentOffset value.
Update the regression tests to verify the proper error message.
Reviewers: pete, ab, lhames, steven_wu, jhenderson
Reviewed By: pete
Subscribers: hiraditya, dexonsmith, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75629
YAML files were not being run during lit testing as there was no lit.local.cfg file. Once this was fixed, some buildbots would fail due to a StringRef that pointed to a std::string inside of a temporary llvm::Triple object. These issues are fixed here by making a local triple object that stays around long enough so the StringRef points to valid data. Fixed memory sanitizer bot bugs as well.
Differential Revision: https://reviews.llvm.org/D75390
Currently dsymutil when generating accelerator tables will attempt to strip the template parameters from names for subroutines.
For some overload operators which contain < in their names e.g. operator< the current method ends up stripping the operator name as well,
we just end up with the name operator in the table for each case.
Differential Revision: https://reviews.llvm.org/D75545
- Added handling of thin archives to symtab.test.
- Added handling of newlines to response.test.
- 62fa3332c9 exposed behaviour
regarding the use of -- on the command line. Added
double-hyphen.test to cover this.
Differential Revision: https://reviews.llvm.org/D73333
uops.info says these should be 15 cycle instructions. Uops.info also shows the 512-bit form uses port 0 and 5 for both register and memory. We had memory using 0 and 1.
Differential Revision: https://reviews.llvm.org/D75549
Response files where not being correctly read on Windows, this change
fixes the issue and adds some tests.
Differential Revision: https://reviews.llvm.org/D69665
Sometimes we need to dump an object and build it again from a YAML
description produced. The problem is that obj2yaml does not dump some
of sections, like string tables and symbol tables.
Because of that yaml2obj implicitly creates them and sections created
are not placed at their original locations. They are added to the end of a section list.
That makes a preparing test cases task harder than it can be.
This patch teaches obj2yaml to dump parts of allocatable SHT_STRTAB, SHT_SYMTAB
and SHT_DYNSYM sections to print placeholders for them.
This also allows to preserve usefull parameters, like virtual address.
Differential revision: https://reviews.llvm.org/D74955
YAML files were not being run during lit testing as there was no lit.local.cfg file. Once this was fixed, some buildbots would fail due to a StringRef that pointed to a std::string inside of a temporary llvm::Triple object. These issues are fixed here by making a local triple object that stays around long enough so the StringRef points to valid data. Also fixed an issue where strings for files in the file table could be added in opposite order due to parameters to function calls not having a strong ordering, which caused tests to fail. Added new arch specfic directories so when targets are not enabled, we continue to function just fine.
Differential Revision: https://reviews.llvm.org/D75390
YAML files were not being run during lit testing as there was no lit.local.cfg file. Once this was fixed, some buildbots would fail due to a StringRef that pointed to a std::string inside of a temporary llvm::Triple object. These issues are fixed here by making a local triple object that stays around long enough so the StringRef points to valid data. Also fixed an issue where strings for files in the file table could be added in opposite order due to parameters to function calls not having a strong ordering, which caused tests to fail.
Differential Revision: https://reviews.llvm.org/D75390
Summary:
In this patch I've done a slightly bigger rewrite to also remove the
hardcoded header lengths.
Reviewers: jhenderson, dblaikie, ikudrin
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75119
Summary:
This could be considered obvious, but I am putting it up to illustrate
the usefulness/impact of the getInitialLength change.
Reviewers: dblaikie, jhenderson, ikudrin
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75117
Try again with an up-to-date version of D69471 (99317124 was a stale
revision).
---
Revise the coverage mapping format to reduce binary size by:
1. Naming function records and marking them `linkonce_odr`, and
2. Compressing filenames.
This shrinks the size of llc's coverage segment by 82% (334MB -> 62MB)
and speeds up end-to-end single-threaded report generation by 10%. For
reference the compressed name data in llc is 81MB (__llvm_prf_names).
Rationale for changes to the format:
- With the current format, most coverage function records are discarded.
E.g., more than 97% of the records in llc are *duplicate* placeholders
for functions visible-but-not-used in TUs. Placeholders *are* used to
show under-covered functions, but duplicate placeholders waste space.
- We reached general consensus about giving (1) a try at the 2017 code
coverage BoF [1]. The thinking was that using `linkonce_odr` to merge
duplicates is simpler than alternatives like teaching build systems
about a coverage-aware database/module/etc on the side.
- Revising the format is expensive due to the backwards compatibility
requirement, so we might as well compress filenames while we're at it.
This shrinks the encoded filenames in llc by 86% (12MB -> 1.6MB).
See CoverageMappingFormat.rst for the details on what exactly has
changed.
Fixes PR34533 [2], hopefully.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-October/118428.html
[2] https://bugs.llvm.org/show_bug.cgi?id=34533
Differential Revision: https://reviews.llvm.org/D69471
Revise the coverage mapping format to reduce binary size by:
1. Naming function records and marking them `linkonce_odr`, and
2. Compressing filenames.
This shrinks the size of llc's coverage segment by 82% (334MB -> 62MB)
and speeds up end-to-end single-threaded report generation by 10%. For
reference the compressed name data in llc is 81MB (__llvm_prf_names).
Rationale for changes to the format:
- With the current format, most coverage function records are discarded.
E.g., more than 97% of the records in llc are *duplicate* placeholders
for functions visible-but-not-used in TUs. Placeholders *are* used to
show under-covered functions, but duplicate placeholders waste space.
- We reached general consensus about giving (1) a try at the 2017 code
coverage BoF [1]. The thinking was that using `linkonce_odr` to merge
duplicates is simpler than alternatives like teaching build systems
about a coverage-aware database/module/etc on the side.
- Revising the format is expensive due to the backwards compatibility
requirement, so we might as well compress filenames while we're at it.
This shrinks the encoded filenames in llc by 86% (12MB -> 1.6MB).
See CoverageMappingFormat.rst for the details on what exactly has
changed.
Fixes PR34533 [2], hopefully.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-October/118428.html
[2] https://bugs.llvm.org/show_bug.cgi?id=34533
Differential Revision: https://reviews.llvm.org/D69471
Summary: YAML files were not being run during lit testing as there was no lit.local.cfg file. Once this was fixed, some buildbots would fail due to a StringRef that pointed to a std::string inside of a temporary llvm::Triple object. These issues are fixed here by making a local triple object that stays around long enough so the StringRef points to valid data.
Reviewers: aprantl, thakis, MaskRay, aadsm, wallace
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75390
Tools working with object files on Darwin (e.g. lipo) may need to know
properties like the CPU type and subtype of a bitcode file. The logic of
converting a triple to a Mach-O CPU_(SUB_)TYPE should be provided by
LLVM instead of relying on tools to re-implement it.
Differential Revision: https://reviews.llvm.org/D75067
This patch fixes a bug that would cause dsymutil to collect
.swiftinterface files for the Swift stdlib and other SDK
modules. There is no advantage in copying these since they should be
loaded from the ones bundled with LLDB's embedded Swift compiler
instead and copying them will cause LLDB to recompile them from source
instead of loading their prebuilt cached counterparts in the SDK.
rdar://problem/57463247
Differential Revisions: https://reviews.llvm.org/D75196
empty-sections.test: add two tests adapted from @jhenderson's https://reviews.llvm.org/D74755#1882221
strip-non-alloc.test: improve. D74755 will change the attribution of an empty section.
They mostly test the behavior of Object.cpp:sectionWithinSegment : how we attribute sections to segments.
`ParentSegment` can affect some subtle layout decisions.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D74879
The patch was reverted in 69da40033 because of test failures on windows.
The problem was the unpredictable order of some of the error messages,
which I've tried to strenghten in that patch.
It turns out this is not possible to do in verbose mode because there
the data is being writted as it is being parsed. No amount of flushing
(as I've done in the non-verbose mode) will help that. Indeed, even
without any buffering the warning messages can end in the middle of a
line in non-verbose mode.
In this patch, I have reverted the changes which tested the relative
position of the warning message, except for the messages about
unsupported initial length, which are the ones I really wanted to test,
and which do come out reasonably.
The original commit message was:
This patch if motivated by D74560, specifically the subthread about what
to print upon encountering reserved initial length values.
If the debug_line prologue has an unsupported version, we skip parsing
the rest of the data. If we encounter an reserved initial length field,
we don't even parse the version. However, we still print out all members
(with value 0) in the dump function.
This patch introduces early exits in the Prologue::dump function so that
we print only the fields that were parsed successfully. In case of an
unsupported version, we skip printing all subsequent prologue fields --
because we don't even know if this version has those fields. In case of a
reserved unit length, we don't print anything -- if the very first field
of the prologue is invalid, it's hard to say if we even have a prologue
to begin with.
Note that the user will still be able to see the invalid/reserved
initial length value in the error message. I've modified (reordered)
debug_line_invalid.test to show that the error message comes straight
after the debug_line offset. I've also added some flush() calls to the
dumping code to ensure this is the case in all situations (without that,
the warnings could get out of sync if the output was not a terminal -- I
guess this is why std::iostreams have the tie() function).
Reviewers: jhenderson, ikudrin, dblaikie
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75043
Summary:
This patch creates the llvm-gsymutil binary that can convert object files to GSYM using the --convert <path> option. It can also dump and lookup addresses within GSYM files that have been saved to disk.
To dump a file:
llvm-gsymutil /path/to/a.gsym
To perform address lookups, like with atos, on GSYM files:
llvm-gsymutil --address 0x1000 --address 0x1100 /path/to/a.gsym
To convert a mach-o or ELF file, including any DWARF debug info contained within the object files:
llvm-gsymutil --convert /path/to/a.out --out-file /path/to/a.out.gsym
Conversion highlights:
- convert DWARF debug info in mach-o or ELF files to GSYM
- convert symbols in symbol table to GSYM and don't convert symbols that overlap with DWARF debug info
- extract UUID from object files
- extract .text (read + execute) section address ranges and filter out any DWARF or symbols that don't fall in those ranges.
- if .text sections are extracted, and if the last gsym::FunctionInfo object has no size, cap the size to the end of the section the function was contained in
Dumping GSYM files will dump all sections of the GSYM file in textual format.
Reviewers: labath, aadsm, serhiy.redko, jankratochvil, xiaobai, wallace, aprantl, JDevlieghere, jdoerfert
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74883
Summary:
This patch if motivated by D74560, specifically the subthread about what
to print upon encountering reserved initial length values.
If the debug_line prologue has an unsupported version, we skip parsing
the rest of the data. If we encounter an reserved initial length field,
we don't even parse the version. However, we still print out all members
(with value 0) in the dump function.
This patch introduces early exits in the Prologue::dump function so that
we print only the fields that were parsed successfully. In case of an
unsupported version, we skip printing all subsequent prologue fields --
because we don't even know if this version has those fields. In case of a
reserved unit length, we don't print anything -- if the very first field
of the prologue is invalid, it's hard to say if we even have a prologue
to begin with.
Note that the user will still be able to see the invalid/reserved
initial length value in the error message. I've modified (reordered)
debug_line_invalid.test to show that the error message comes straight
after the debug_line offset. I've also added some flush() calls to the
dumping code to ensure this is the case in all situations (without that,
the warnings could get out of sync if the output was not a terminal -- I
guess this is why std::iostreams have the tie() function).
Reviewers: jhenderson, ikudrin, dblaikie
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75043
While the value of the CIE pointer field in a DWARF FDE record is
an offset to the corresponding CIE record from the beginning of
the section, for EH FDE records it is relative to the current offset.
Previously, we did not make that distinction when dumped both kinds
of FDE records and just printed the same value for the CIE pointer
field and the CIE offset; that was acceptable for DWARF FDEs but was
wrong for EH FDEs.
This patch fixes the issue by explicitly printing the offset of the
linked CIE object.
Differential Revision: https://reviews.llvm.org/D74613
This reverts commit 9fe769a961, and re-lands commit c2e272f8cf.
Summary: Add support for ?, DUP, and string initializers, as well as MASM syntax for named data locations.
This version avoids the use of a C++17-only feature, if-statements with initializer.
Reviewers: rnk, thakis
Reviewed By: thakis
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73226
Summary: Add support for ?, DUP, and string initializers, as well as MASM syntax for named data locations.
Reviewers: rnk, thakis
Reviewed By: thakis
Subscribers: merge_guards_bot, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73226
I've noticed that it is not convenient to create YAMLs from
binaries (using obj2yaml) that have to be test cases for obj2yaml
later (after applying yaml2obj).
The problem, for example is that obj2yaml emits "DynamicSymbols:"
key instead of .dynsym. It also does not create .dynstr.
And when a YAML document without explicitly defined .dynsym/.dynstr
is given to yaml2obj, we have issues:
1) These sections are placed after non-allocatable sections (I've fixed it in D74756).
2) They have VA == 0. User needs create descriptions for such sections explicitly manually
to set a VA.
This patch addresses (2). I suggest to let yaml2obj assign virtual addresses by itself.
It makes an output binary to be much closer to "normal" ELF.
(It is still possible to use "Address: 0x0" for a section to get the original behavior
if it is needed)
Differential revision: https://reviews.llvm.org/D74764
Summary:
GNU objdump prints the method name in disassembly output, and upon further investigation this seems to come from debug info, not the symbol table.
Some additional refactoring is necessary to make this work even when the line number is 0/the filename is unknown. The added test case includes a note for this scenario.
See http://llvm.org/PR41341 for more info.
Reviewers: dblaikie, MaskRay, jhenderson
Reviewed By: MaskRay
Subscribers: ormris, jvesely, aprantl, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74507
The changes the in-memory representation of wasm symbols such that their
optional ImportName and ImportModule use llvm::Optional.
ImportName is set whenever WASM_SYMBOL_EXPLICIT_NAME flag is set.
ImportModule (for imports) is currently always set since it defaults to
"env".
In the future we can possibly extent to binary format distingish
import which have explit module names.
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74109
.dynsym and .dynstr are allocatable and therefore normally are placed
before non-allocatable .strtab, .shstrtab, .symtab sections.
But we are placing them after currently what creates a mix of
alloc/non-alloc sections and does not look normal.
Differential revision: https://reviews.llvm.org/D74756
The tests added in D74425/commit a71feda24e
fail with an assertion on macOS, as they seem to require ELF support.
Passing a linux triple ensures the object files are using ELF.
This fixes some GreenDragon failures.
Summary:
This patch teaches llvm-dwp to parse DWARFv5 info section header.
Tested this using asm test case caontaining DWARFv5 info.
Assemling it to DWO object, checking corresponding content using llvm-dwarfdump. Then finally, packaging it
to DWP using llvm-dwp and again checking corresponding content using llvm-dwarfdump.
Reviewers: dblaikie, aprantl, probinson.
Reviewed By: dblaikie.
Differential Revision: https://reviews.llvm.org/D74425
A future MC change may add a warning/error when a .section directive
specifies incorrect sh_flags/sh_type. Fix the tests to use correct
sh_flags/sh_type.
James Henderson