This patch adds a pass to replace calls to vector intrinsics (i.e., LLVM
intrinsics operating on vector operands) with calls to a vector library.
Currently, calls to LLVM intrinsics are only replaced with calls to vector
libraries when scalar calls to intrinsics are vectorized by the Loop- or
SLP-Vectorizer.
With this pass, it is now possible to replace calls to LLVM intrinsics
already operating on vector operands, e.g., if such code was generated
by MLIR. For the replacement, information from the TargetLibraryInfo,
e.g., as specified via -vector-library is used.
This is a re-try of the original commit 2303e93e66 that was reverted
due to pass manager problems. Other minor changes have also been made.
Differential Revision: https://reviews.llvm.org/D95373
It seems nicer to list passes given a flag rather than displaying all
passes in opt --help.
This is awkwardly structured because a PassBuilder is required, but
reusing the PassBuilder in runPassPipeline() doesn't work because we
read the input IR before getting to runPassPipeline(). So printing the
list of passes needs to happen before reading the input IR. If we remove
the legacy PM code in main() and move everything from NewPMDriver.cpp
into opt.cpp, we can create the PassBuilder before reading IR and check
if we should print the list of passes and exit. But until then this hack
seems fine.
Compared to the legacy PM, the new PM passes are lacking descriptions.
We'll need to figure out a way to add descriptions if we think this is
important.
Also, this only works for passes specified in PassRegistry.def. If we
want to print other custom registered passes, we'll need a different
mechanism.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D96101
This patch adds a pass to replace calls to vector intrinsics
(i.e., LLVM intrinsics operating on vector operands) with
calls to a vector library.
Currently, calls to LLVM intrinsics are only replaced with
calls to vector libraries when scalar calls to intrinsics are
vectorized by the Loop- or SLP-Vectorizer.
With this pass, it is now possible to replace calls to LLVM
intrinsics already operating on vector operands, e.g., if
such code was generated by MLIR. For the replacement,
information from the TargetLibraryInfo, e.g., as specified
via -vector-library is used.
Differential Revision: https://reviews.llvm.org/D95373
Identify dynamically exported symbols (--export-dynamic[-symbol=],
--dynamic-list=, or definitions needed to preempt shared objects) and
prevent their LTO visibility from being upgraded.
This helps avoid use of whole program devirtualization when there may
be overrides in dynamic libraries.
Differential Revision: https://reviews.llvm.org/D91583
We tend to assume that the AA pipeline is by default the default AA
pipeline and it's confusing when it's empty instead.
PR48779
Initially reverted due to BasicAA running analyses in an unspecified
order (multiple function calls as parameters), fixed by fetching
analyses before the call to construct BasicAA.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D95117
We tend to assume that the AA pipeline is by default the default AA
pipeline and it's confusing when it's empty instead.
PR48779
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D95117
In preparation for turning on opt's -enable-new-pm by default, this pins
uses of passes via the legacy "opt -passname" with pass names beginning
with "polly-" and "polyhedral-info" to the legacy PM. Many of these
tests use -analyze, which isn't supported in the new PM.
(This doesn't affect uses of "opt -passes=passname").
rL240766 accidentally removed `-polly-prepare` in
phi_not_grouped_at_top.ll, and it also doesn't use the output of
-analyze.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D94266
There are only two used in the IR optimization pipeline.
Port these and add them to the default pipeline.
Similar to https://reviews.llvm.org/D93863.
I added -mtriple to some tests since under the new PM, the passes are
only available when the TargetMachine is specified.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D93930
`UniqueInternalLinkageNamesPass` is useful to CSSPGO, especially when pseudo probe is used. It solves naming conflict for static functions which otherwise will share a merged profile and likely have a profile quality issue with mismatched CFG checksums. Since the pseudo probe instrumentation happens very early in the pipeline, I'm moving `UniqueInternalLinkageNamesPass` right before it. This is being done only to the new pass manager.
Reviewed By: dblaikie, aeubanks
Differential Revision: https://reviews.llvm.org/D93656
This is consistent with the layout of other passes,
and simplifies further refinements regarding DomTree handling.
This is indended to be a NFC commit.
And add it to the AMDGPU opt pipeline.
This is a function pass instead of a module pass (like the legacy pass)
because it's getting added to a CGSCCPassManager, and you can't put a
module pass in a CGSCCPassManager.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D93885
And add to AMDGPU opt pipeline.
Don't pin an opt run to the legacy PM when -enable-new-pm=1 if these
passes (or passes introduced in https://reviews.llvm.org/D93863) are in
the list of passes.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D93875
This was accidentally reverted by a later change.
LSR currently only runs in the codegen pass manager.
There are a couple issues with LSR and the NPM.
1) Lots of tests assume that LCSSA isn't run before LSR. This breaks a
bunch of tests' expected output. This is fixable with some time put in.
2) LSR doesn't preserve LCSSA. See
llvm/test/Analysis/MemorySSA/update-remove-deadblocks.ll. LSR's use of
SCEVExpander is the only use of SCEVExpander where the PreserveLCSSA option is
off. Turning it on causes some code sinking out of loops to fail due to
SCEVExpander's inability to handle the newly created trivial PHI nodes in the
broken critical edge (I was looking at
llvm/test/Transforms/LoopStrengthReduce/X86/2011-11-29-postincphi.ll).
I also tried simply just calling formLCSSA() at the end of LSR, but the extra
PHI nodes cause regressions in codegen tests.
We'll delay figuring these issues out until later.
This causes the number of check-llvm failures with -enable-new-pm true
by default to go from 60 to 29.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D92796
This patch adds new PM support for the pass and the pass can be now used
during middle-end transforms. The old pass is remamed to
ScalarizeMaskedMemIntrinLegacyPass.
Reviewed-By: skatkov, aeubanks
Differential Revision: https://reviews.llvm.org/D92743
LSR currently only runs in the codegen pass manager.
There are a couple issues with LSR and the NPM.
1) Lots of tests assume that LCSSA isn't run before LSR. This breaks a
bunch of tests' expected output. This is fixable with some time put in.
2) LSR doesn't preserve LCSSA. See
llvm/test/Analysis/MemorySSA/update-remove-deadblocks.ll. LSR's use of
SCEVExpander is the only use of SCEVExpander where the PreserveLCSSA option is
off. Turning it on causes some code sinking out of loops to fail due to
SCEVExpander's inability to handle the newly created trivial PHI nodes in the
broken critical edge (I was looking at
llvm/test/Transforms/LoopStrengthReduce/X86/2011-11-29-postincphi.ll).
I also tried simply just calling formLCSSA() at the end of LSR, but the extra
PHI nodes cause regressions in codegen tests.
We'll delay figuring these issues out until later.
This causes the number of check-llvm failures with -enable-new-pm true
by default to go from 60 to 29.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D92796
Codegen-specific passes are being ported to the NPM. Rename for better
clarity and note that ported passes that fully work with the NPM should
be removed from these lists.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D92818
1. Removed #include "...AliasAnalysis.h" in other headers and modules.
2. Cleaned up includes in AliasAnalysis.h.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D92489
This is the #1 of 2 changes that make remarks hotness threshold option
available in more tools. The changes also allow the threshold to sync with
hotness threshold from profile summary with special value 'auto'.
This change modifies the interface of lto::setupLLVMOptimizationRemarks() to
accept remarks hotness threshold. Update all the tools that use it with remarks
hotness threshold options:
* lld: '--opt-remarks-hotness-threshold='
* llvm-lto2: '--pass-remarks-hotness-threshold='
* llvm-lto: '--lto-pass-remarks-hotness-threshold='
* gold plugin: '-plugin-opt=opt-remarks-hotness-threshold='
Differential Revision: https://reviews.llvm.org/D85809
This matches the legacy PM's EP_ModuleOptimizerEarly. Some backends use
this extension point and adding the pass somewhere else like
PipelineStartEPCallback doesn't work.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D91804
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
Make DebugLogging a member variable so that users of PassBuilder don't
need to pass it around so much.
Move call to TargetMachine::registerPassBuilderCallbacks() within
PassBuilder so users don't need to remember to call it.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D90437
Summary:
This patch does the following:
1. Make InitTargetOptionsFromCodeGenFlags() accepts Triple as a
parameter, because some options' default value is triple dependant.
2. DataSections is turned on by default on AIX for llc.
3. Test cases change accordingly because of the default behaviour change.
4. Clang Driver passes in -fdata-sections by default on AIX.
Reviewed By: MaskRay, DiggerLin
Differential Revision: https://reviews.llvm.org/D88737
This removes "VerifyEachPass" parameters from a lot of functions which is nice.
Don't verify after special passes or VerifierPass.
This introduces verification on loop and cgscc passes, verifying the corresponding function/module.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D88764
The patch adds a new TargetMachine member "registerPassBuilderCallbacks" for targets to add passes to the pass pipeline using the New Pass Manager (similar to adjustPassManager for the Legacy Pass Manager).
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D88138
This is in preparation for supporting -debugify-each, which adds a debug
info pass before and after each pass.
Switch VerifyEach to use this.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D88107
'require<globals-aa>' is needed to make globals-aa work in NPM, since
globals-aa is a module analysis but function passes cannot run module
analyses on demand.
So don't skip translating alias analyses to 'require<>'.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D87743
Lukas Sommer