The current argument order has "expected" and "actual" the wrong way around,
so that the diff shows the change from expected to actual, not from actual to expected.
Namely, if the expected diagnostics contains the string "foo", but the analyzer emits "bar",
we really want to see:
```
- foo
+ bar
```
not
```
- bar
+ foo
```
since adapting to most changes would require applying that diff to the expected output.
Differential Revision: https://reviews.llvm.org/D56340
llvm-svn: 350866
The complicated machinery for passing the summary log around is actually
only used for one thing! To figure out whether the "dealloc" message was
sent.
Since I have tried to extend it for other uses and failed (it's actually
very hard to use), I think it's much better to simply use a tag and
remove the summary log altogether.
Differential Revision: https://reviews.llvm.org/D56228
llvm-svn: 350864
Make sure all checks for attributes go through a centralized function,
which checks whether attribute handling is enabled, and performs
validation. The type of the attribute is returned.
Sadly, metaprogramming is required as attributes have no sensible static
getters.
Differential Revision: https://reviews.llvm.org/D56222
llvm-svn: 350862
This group controls two diagnostics: deleting an abstract class with
a non-virtual dtor, which is a guaranteed crash, and deleting a
non-abstract polymorphic class with a non-virtual dtor, which is just
suspicious.
rdar://40380564
Differential revision: https://reviews.llvm.org/D56405
llvm-svn: 350856
Summary: This is just changing naming and documentation to be general about external definitions that can be imported for cross translation unit analysis. There is at least a plan to add VarDecls: D46421
Reviewers: NoQ, xazax.hun, martong, a.sidorin, george.karpenkov, serge-sans-paille
Reviewed By: xazax.hun, martong
Subscribers: mgorny, whisperity, baloghadamsoftware, szepet, rnkovacs, mikhail.ramalho, Szelethus, donat.nagy, dkrupp, cfe-commits
Differential Revision: https://reviews.llvm.org/D56441
llvm-svn: 350852
`FILECHECK_OPTS` into environment for FileCheck tests.
Summary:
This fixes the following FileCheck tests:
* FileCheck/dump-input-enable.txt
* FileCheck/match-full-lines.txt
when `FILECHECK_DUMP_INPUT_ON_FAILURE` is set in the environment.
By default llvm-lit propagates `FILECHECK_DUMP_INPUT_ON_FAILURE` and
`FILECHECK_OPTS` from llvm-lit's environment into the test environment.
Unfortunately this can break FileCheck's tests because they expect that
these environment variables not to be set.
rdar://problem/47176262
Reviewers: jdenny, probinson, george.karpenkov
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56541
llvm-svn: 350850
In an assert build, the Error gets destroyed and we get "Program aborted
due to an unhandled Error:".
In release, we get an empty message.
llvm-svn: 350848
This is https://bugs.llvm.org/show_bug.cgi?id=26892,
GNU objdump hides the special symbol entry:
SYMBOL TABLE:
000000000000a7e0 l F .text 00000000000003f9 bi_copymodules
while llvm-objdump does not:
SYMBOL TABLE:
0000000000000000 *UND* 00000000
000000000000a7e0 l F .text 000003f9 bi_copymodules
Patch makes the behavior of the llvm-objdump to be consistent with the GNU objdump.
Differential revision: https://reviews.llvm.org/D56076
llvm-svn: 350840
This commit fixes the dwordx3/southern-islands failures that were found
in bugzilla https://bugs.llvm.org/show_bug.cgi?id=40129, by not
generating the dwordx3 variants of load/store instructions that were
added to the ISA after southern islands.
Differential Revision: https://reviews.llvm.org/D56434
llvm-svn: 350838
When the range between the source and target of a V7PILongThunk exceeded an
int32 we would trigger a relocation out of range error for the
R_ARM_MOVT_PREL or R_ARM_THM_MOVT_PREL relocation. This case can happen when
linking the linux kernel as it is loaded above 0xf0000000.
There are two parts to the fix.
- Remove the overflow check for R_ARM_MOVT_PREL or R_ARM_THM_MOVT_PREL. The
ELF for the ARM Architecture document defines these relocations as having no
overflow checking so the check was spurious.
- Use int64_t for the offset calculation, in line with similar thunks so
that PC + (S - P) < 32-bits. This results in less surprising disassembly.
Differential Revision: https://reviews.llvm.org/D56396
llvm-svn: 350836
That is, remove many of the calls to Type::getNumContainedTypes(),
Type::subtypes(), and Type::getContainedType(N).
I'm not intending to remove these accessors -- they are
useful/necessary in some cases. However, removing the pointee type
from pointers would potentially break some uses, and reducing the
number of calls makes it easier to audit.
llvm-svn: 350835
This further improves compatibility with GNU as, allowing input such as the
following to be assembled:
.equ CONST, 0x123456
li a0, CONST
addi a0, a0, %lo(CONST)
.equ CONST, 1
slli a0, a0, CONST
Note that we don't have perfect compatibility with gas, as it will avoid
emitting a relocation in this case:
addi a0, a0, %lo(CONST2)
.equ CONST2, 0x123456
Thanks to Shiva Chen for suggesting a better way to approach this during review.
Differential Revision: https://reviews.llvm.org/D52298
llvm-svn: 350831
When we use the partial-matching function on a 128-bit chunk, we must
account for the possibility that we've matched undef halves of the
original source vectors, so the outputs may need to be reset.
This should allow closing PR40243:
https://bugs.llvm.org/show_bug.cgi?id=40243
llvm-svn: 350830
The section and offset can be very helpful in diagnosing certian errors.
For example on a relocation overflow or misalignment diagnostic:
test.c:(function foo): relocation R_PPC64_ADDR16_DS out of range: ...
The function foo can have many R_PPC64_ADDR16_DS relocations. Adding the offset
and section will identify exactly which relocation is causing the failure.
Differential Revision: https://reviews.llvm.org/D56453
llvm-svn: 350828
In the PPC64 target we map toc-relative relocations, dynamic thread pointer
relative relocations, and got relocations into a corresponding ADDR16 relocation
type for handling in relocateOne. This patch saves the orignal RelType before
mapping to an ADDR16 relocation so that any diagnostic messages will not
mistakenly use the mapped type.
Differential Revision: https://reviews.llvm.org/D56448
llvm-svn: 350827
This is a partial fix for:
https://bugs.llvm.org/show_bug.cgi?id=40243
...as seen in the integer test, we still need to correct the result when using the
existing (old) horizontal op matching function because it does not model the way
x86 256-bit horizontal ops return results (each 128-bit half is its own horizontal-op).
A potential follow-up change for that is discussed in the bug report - see also D56490.
This generally duplicates a lot of the existing matching code, but we can't just remove
that without introducing regressions, so the existing code is renamed and used less often.
Follow-ups may try to reduce that overlap.
Differential Revision: https://reviews.llvm.org/D56450
llvm-svn: 350826
Summary:
This patch changes the legalization action for some half-precision floating-
point vector intrinsics (FSIN, FLOG, etc.) from Promote to Expand. These ops
are not supported in hardware for half-precision vectors, but promotion is
not always possible (for v8f16 operands). Changing the action to Expand fixes
an assertion failure in the legalizer when the frontend produces such ops.
In addition, a quick microbenchmark shows that, in the v4f16 case,
expanding introduces fewer spills and is therefore slightly faster than
promoting.
Reviewers: t.p.northover, SjoerdMeijer
Reviewed By: SjoerdMeijer
Subscribers: javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D56296
llvm-svn: 350825
This is https://bugs.llvm.org/show_bug.cgi?id=37151,
GNU objdump spec says that "Normally the disassembly output will skip blocks of zeroes.",
but currently, llvm-objdump prints them.
The patch implements the -z/--disassemble-zeroes option and switches the default to always
skip blocks of zeroes.
Differential revision: https://reviews.llvm.org/D56083
llvm-svn: 350823
See https://bugs.llvm.org/show_bug.cgi?id=40070.
GNU addr2line accepts input addresses both on the command-line and via
stdin. llvm-symbolizer previously only supported the latter. This
change adds support for the former. As with addr2line, the new
behaviour is to only look for addresses on stdin if no positional
arguments were provided to llvm-symbolizer.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D56272
llvm-svn: 350821
Field ResourceUnitMask was incorrectly defined as a 'const unsigned' mask. It
should have been a 64 bit quantity instead. That means, ResourceUnitMask was
always implicitly truncated to a 32 bit quantity.
This issue has been found by inspection. Surprisingly, that bug was latent, and
it never negatively affected any existing upstream targets.
This patch fixes the wrong definition of ResourceUnitMask, and adds a bunch of
extra debug prints to help debugging potential issues related to invalid
processor resource masks.
llvm-svn: 350820
Patch by Michael Skvortsov!
This change adds a basic support for linking static MSP430 ELF code.
Implemented relocation types are intended to correspond to the BFD.
Differential revision: https://reviews.llvm.org/D56535
llvm-svn: 350819
This patch implements the long double __floattitf (int128_t) method for
PowerPC -- specifically to convert a 128 bit integer into a long double
(IBM double-double).
To invoke this method, one can do so by linking against compiler-rt, via the
--rtlib=compiler-rt command line option supplied to clang.
Differential Revision: https://reviews.llvm.org/D54313/
llvm-svn: 350818
George Karpenkov