llvm-objdump currently calls report_fatal_error() when the e_phoff field is invalid.
This is tested by elf-invalid-phdr.test which has the following issues:
1) It uses a precompiled object.
2) it could be a part of invalid.test.
3) It tests the Object lib, but we have no separate test for llvm-objdump.
This patch addresses issues mentioned.
Differential revision: https://reviews.llvm.org/D83559
This adds the --debug-vars option to llvm-objdump, which prints
locations (registers/memory) of source-level variables alongside the
disassembly based on DWARF info. A vertical line is printed for each
live-range, with a label at the top giving the variable name and
location, and the position and length of the line indicating the program
counter range in which it is valid.
Differential revision: https://reviews.llvm.org/D70720
Summary:
This commit slightly modifies the MCDisassembler, and llvm-objdump to
allow targets to also decode entire symbols.
WebAssembly uses the onSymbolStart hook it to decode preludes.
WebAssembly partially disassembles the symbol in its target specific
way; and then falls back to the normal flow of llvm-objdump.
AMDGPU needs it to decode kernel descriptors entirely, and move to the
next symbol.
This commit is to split the above task into 2.
- Changes to llvm-objdump and MC-layer without breaking WebAssembly code
[ this commit ]
- AMDGPU's implementation of onSymbolStart that decodes kernel
descriptors. [ https://reviews.llvm.org/D80713 ]
Reviewers: scott.linder, t-tye, sunfish, arsenm, jhenderson, MaskRay, aardappel
Reviewed By: scott.linder, jhenderson, aardappel
Subscribers: bcain, dschuff, wdng, tpr, sbc100, jgravelle-google, hiraditya, aheejin, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80512
Place the instruction at the 24th column (0-based indexing), matching
GNU objdump ARM/AArch64/powerpc/etc when the address is low.
This is beneficial for non-x86 targets which have short instruction
lengths.
```
// GNU objdump AArch64
0: 91001062 add x2, x3, #0x4
400078: 91001062 add x2, x3, #0x4
// llvm-objdump, with this patch
0: 62 10 00 91 add x2, x3, #4
400078: 62 10 00 91 add x2, x3, #4
// llvm-objdump, if we change to print a word instead of bytes in the future
0: 91001062 add x2, x3, #4
400078: 91001062 add x2, x3, #4
// GNU objdump Thumb
0: bf00 nop
// GNU objdump Power ISA 3.1 64-bit instruction
// 0: 00 00 10 04 plwa r3,0
// 4: 00 00 60 a4
```
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D81590
As noticed by dblaikie.
I don't know what code paths using reportError can cause stdout output
to be interleaved with stderr, so no test is added now.
Also drop an unneeded use of errs().fflush() in reportWarning().
I requested this in D64165.
Demangling Itanium symbols either consumes the whole input or fails,
but Microsoft symbols can be successfully demangled with just some
of the input.
Add an outparam that enables clients to know how much of the input was
consumed, and use this flag to give llvm-undname an opt-in warning
on partially consumed symbols.
Differential Revision: https://reviews.llvm.org/D80173
I noticed that std::error_code() does one-time initialization. Avoid
that overhead with Expected<T> and llvm::Error. Also, it is consistent
with the virtual interface and ELF, and generally cleaner.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D79643
Fixes PR44357
For ARM ELF, regions covered by data mapping symbols `$d` are dumped as `.byte`, `.short` or `.word` but inline relocations are not printed. This patch merges its loop into the normal instruction printing loop so that inline relocations are printed.
Reviewed By: nickdesaulniers
Differential Revision: https://reviews.llvm.org/D79284
Summary:
In D77860, we have changed `getSymbolFlags()` return type to `Expected<uint32_t>`.
This change helps bubble the error further up the stack.
Reviewers: jhenderson, grimar, JDevlieghere, MaskRay
Reviewed By: jhenderson
Subscribers: hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79075
D63847 added `MCInstrAnalysis::evaluateMemoryOperandAddress()`. This patch
leverages the feature to print the target addresses for evaluable instructions.
```
-400a: movl 4080(%rip), %eax
+400a: movl 4080(%rip), %eax # 5000 <data1>
```
This patch also deletes `MIA->isCall(Inst) || MIA->isUnconditionalBranch(Inst) || MIA->isConditionalBranch(Inst)`
which is used to guard `MCInstrAnalysis::evaluateBranch()`
Reviewed By: jhenderson, skan
Differential Revision: https://reviews.llvm.org/D78776
Summary:
Continuing from D77285, the external interfaces implemented by
`ELFDump.cpp` are now declared in `ELFDump.h` and moved into the
`llvm::objdump` namespace. Externs defined in `ELFDump.cpp` that are
unreferenced externally are also made static.
Reviewers: jhenderson, MaskRay, DiggerLin, jasonliu, daltenty
Reviewed By: jhenderson, MaskRay
Subscribers: RKSimon, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78695
Prior to this patch, llvm-objdump would only look in the last section
(according to the section header table order) that matched an address
for a symbol when identifying the target symbol of a call or branch
operation. If there are multiple sections with the same address, due to
some of them being empty, it did not look in those, even if the symbol
couldn't be found in the first section looked in.
This patch causes llvm-objdump to look in all sections for possible
candidate symbols. If there are multiple possible symbols, it picks one
from a non-empty section, if possible (as that is more likely to be the
"real" symbol since functions can't really be in emptiy sections),
before falling back to those in empty sections. If all else fails, it
falls back to absolute symbols as it did before.
Differential Revision: https://reviews.llvm.org/D78549
Reviewed by: grimar, Higuoxing
Currently C++ symbols are demangled in the symbol table as well as in
the disassembly and relocations. This patch adds demangling of C++
symbols in targets of calls and branches making it easier to decipher
control flow in disassembly. This also matches up with GNUobjdump's
behavior
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D77957
Summary:
Continuing from D77285, the external interfaces implemented by
`WasmDump.cpp` are now declared in `WasmDump.h` and moved into the
`llvm::objdump` namespace.
Reviewers: jhenderson, MaskRay, DiggerLin, jasonliu, daltenty
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D77990
This patch intends to fix incomplete relocation printing for
XCOFF (potentially for other targets).
Differential Revision: https://reviews.llvm.org/D77580
Continuing from D77388, this patch moves interface declarations
associated with `MachODump.cpp` into the headers corresponding to the
file that defines the variable. At the same time, these externs are
moved into the `llvm::objdump` namespace. The externs defined in
`MachODump.cpp` that are not referenced outside of it are given internal
linkage.
This patch does not rename the external functions defined by
`MachODump.cpp` that are not clearly named as being specific to Mach-O.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D77730
When two sections shared the same address, the disassembly code was
using pointer values when sorting (see the SectionRef less than
operator). Since those values aren't guaranteed to have a specific
order, this meant the disassembly code would sometimes change which
section to pick when finding symbols targeted by calls in fully linked
objects.
This change fixes the non-determinism, so that the same section is
always picked. This might have a negative impact in that now a section
without any symbol might be picked over a section with symbols, but this
will be addressed in a later commit.
Fixes https://bugs.llvm.org/show_bug.cgi?id=45411.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D77640
Summary:
This patch moves the forward declarations of command-line `cl::*`
externs in `MachODump.cpp` and `llvm-objdump.cpp` into the headers
corresponding to the file that defines the variable. At the same time,
these externs are moved into the `llvm::objdump` namespace. The externs
that are not referenced outside their defining translation unit are made
static.
This does not factor out uses of the Mach-O options from
`llvm-objdump.cpp`.
Reviewers: jhenderson, MaskRay, DiggerLin, jasonliu, daltenty
Reviewed By: jhenderson, MaskRay
Subscribers: rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77388
SUMMARY:
For the llvm-objdump -D, the symbol name is used as a label in the disassembly for the specific address (when a symbol address is equal to the virtual address in the dump).
In XCOFF, multiple symbols may have the same name, being differentiated by their storage mapping class. It is helpful to print the QualName and not just the name when forming the output label for a csect symbol. The symbol index further removes any ambiguity caused by duplicate names.
To maintain compatibility with the binutils objdump, the XCOFF-specific --symbol-description option is added to enable the enhanced format.
Reviewers: hubert.reinterpretcast, James Henderson, Jason Liu ,daltenty
Subscribers: wuzish, nemanjai, hiraditya
Differential Revision: https://reviews.llvm.org/D72973
Summary:
This patch is to teach `llvm-objdump` dump dynamic symbols (`-T` and `--dynamic-syms`). Currently, this patch is not fully compatible with `gnu-objdump`, but I would like to continue working on this in next few patches. It has two issues.
1. Some symbols shouldn't be marked as global(g). (`-t/--syms` has same issue as well) (Fixed by D75659)
2. `gnu-objdump` can dump version information and *dynamically* insert before symbol name field.
`objdump -T a.out` gives:
```
DYNAMIC SYMBOL TABLE:
0000000000000000 w D *UND* 0000000000000000 _ITM_deregisterTMCloneTable
0000000000000000 DF *UND* 0000000000000000 GLIBC_2.2.5 printf
0000000000000000 DF *UND* 0000000000000000 GLIBC_2.2.5 __libc_start_main
0000000000000000 w D *UND* 0000000000000000 __gmon_start__
0000000000000000 w D *UND* 0000000000000000 _ITM_registerTMCloneTable
0000000000000000 w DF *UND* 0000000000000000 GLIBC_2.2.5 __cxa_finalize
```
`llvm-objdump -T a.out` gives:
```
DYNAMIC SYMBOL TABLE:
0000000000000000 w D *UND* 0000000000000000 _ITM_deregisterTMCloneTable
0000000000000000 g DF *UND* 0000000000000000 printf
0000000000000000 g DF *UND* 0000000000000000 __libc_start_main
0000000000000000 w D *UND* 0000000000000000 __gmon_start__
0000000000000000 w D *UND* 0000000000000000 _ITM_registerTMCloneTable
0000000000000000 w DF *UND* 0000000000000000 __cxa_finalize
```
Reviewers: jhenderson, grimar, MaskRay, espindola
Reviewed By: jhenderson, grimar
Subscribers: emaste, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75756
Summary:
This patch addresses, for the interfaces implemented by `COFFDump.cpp`,
multiple issues identified with the current structure of
`llvm-objdump.h` in the review of D72973.
This patch moves implementation details of the tool into an
`llvm::objdump` namespace for external linkage names, splits the
implementation details into separate headers for each implementation
file, and uses qualified names when declaring members of the
`llvm::objdump` namespace in place of leaving the namespace definition
open.
Reviewers: jhenderson, DiggerLin, jasonliu, daltenty, MaskRay
Reviewed By: jhenderson, MaskRay
Subscribers: MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77285
Summary:
Implement several XCOFF hooks to get '-r' option working for llvm-objdump -r.
Reviewer: DiggerLin, hubert.reinterpretcast, jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D75131
```
// llvm-objdump -d output (before)
400000: e8 0b 00 00 00 callq 11
400005: e8 0b 00 00 00 callq 11
// llvm-objdump -d output (after)
400000: e8 0b 00 00 00 callq 0x400010
400005: e8 0b 00 00 00 callq 0x400015
// GNU objdump -d. The lack of 0x is not ideal because the result cannot be re-assembled
400000: e8 0b 00 00 00 callq 400010
400005: e8 0b 00 00 00 callq 400015
```
In llvm-objdump, we pass the address of the next MCInst. Ideally we
should just thread the address of the current address, unfortunately we
cannot call X86MCCodeEmitter::encodeInstruction (X86MCCodeEmitter
requires MCInstrInfo and MCContext) to get the length of the MCInst.
MCInstPrinter::printInst has other callers (e.g llvm-mc -filetype=asm, llvm-mca) which set Address to 0.
They leave MCInstPrinter::PrintBranchImmAsAddress as false and this change is a no-op for them.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D76580
Follow-up of D72172 and D72180
This patch passes `uint64_t Address` to print methods of PC-relative
operands so that subsequent target specific patches can change
`*InstPrinter::print{Operand,PCRelImm,...}` to customize the output.
Add MCInstPrinter::PrintBranchImmAsAddress which is set to true by
llvm-objdump.
```
// Current llvm-objdump -d output
aarch64: 20000: bl #0
ppc: 20000: bl .+4
x86: 20000: callq 0
// Ideal output
aarch64: 20000: bl 0x20000
ppc: 20000: bl 0x20004
x86: 20000: callq 0x20005
// GNU objdump -d. The lack of 0x is not ideal because the result cannot be re-assembled
aarch64: 20000: bl 20000
ppc: 20000: bl 0x20004
x86: 20000: callq 20005
```
In `lib/Target/X86/X86GenAsmWriter1.inc` (generated by `llvm-tblgen -gen-asm-writer`):
```
case 12:
// CALL64pcrel32, CALLpcrel16, CALLpcrel32, EH_SjLj_Setup, JCXZ, JECXZ, J...
- printPCRelImm(MI, 0, O);
+ printPCRelImm(MI, Address, 0, O);
return;
```
Some targets have 2 `printOperand` overloads, one without `Address` and
one with `Address`. They should annotate derived `Operand` properly with
`let OperandType = "OPERAND_PCREL"`.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D76574
llvm-objdump.cpp has 3 array_pod_sort() calls used for symbolization.
array_pod_start() calls qsort() internally and can have different
behaviors across different libcs. Use llvm::stable_sort instead.
Reviewed By: davidb, thopre
Differential Revision: https://reviews.llvm.org/D76739
This adds the --debug-vars option to llvm-objdump, which prints
locations (registers/memory) of source-level variables alongside the
disassembly based on DWARF info. A vertical line is printed for each
live-range, with a label at the top giving the variable name and
location, and the position and length of the line indicating the program
counter range in which it is valid.
Currently, this only works for object files, not executables or shared
libraries.
Differential revision: https://reviews.llvm.org/D70720
GCC when configured with --enable-gnu-unique (default on glibc>=2.11)
emits STB_GNU_UNIQUE for certain objects which are otherwise emitted as
STT_OBJECT, such as an inline function's static local variable or its
guard variable, and a static data member of a template.
Clang does not implement -fgnu-unique.
Implementing it as a binding is strange and the feature itself is
considered by some as a misfeature.
Reviewed By: grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D75797
The new behavior matches GNU objdump. A pair of angle brackets makes tests slightly easier.
`.foo:` is not unique and thus cannot be used in a `CHECK-LABEL:` directive.
Without `-LABEL`, the CHECK line can match the `Disassembly of section`
line and causes the next `CHECK-NEXT:` to fail.
```
Disassembly of section .foo:
0000000000001634 .foo:
```
Bdragon: <> has metalinguistic connotation. it just "feels right"
Reviewed By: rupprecht
Differential Revision: https://reviews.llvm.org/D75713
This fixes several issues. The behavior changes are:
A SHN_COMMON symbol does not have the 'g' flag.
An undefined symbol does not have 'g' or 'l' flag.
A STB_GLOBAL SymbolRef::ST_Unknown symbol has the 'g' flag.
A STB_LOCAL SymbolRef::ST_Unknown symbol has the 'l' flag.
Reviewed By: rupprecht
Differential Revision: https://reviews.llvm.org/D75659
Summary:
GNU objdump prints the method name in disassembly output, and upon further investigation this seems to come from debug info, not the symbol table.
Some additional refactoring is necessary to make this work even when the line number is 0/the filename is unknown. The added test case includes a note for this scenario.
See http://llvm.org/PR41341 for more info.
Reviewers: dblaikie, MaskRay, jhenderson
Reviewed By: MaskRay
Subscribers: ormris, jvesely, aprantl, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74507
Summary:
GNU objdump prints the file format in lowercase, e.g. `elf64-x86-64`. llvm-objdump prints `ELF64-x86-64` right now, even though piping that into llvm-objcopy refuses that as a valid arch to use.
As an example of a problem this causes, see: https://github.com/ClangBuiltLinux/linux/issues/779
Reviewers: MaskRay, jhenderson, alexshap
Reviewed By: MaskRay
Subscribers: tpimh, sbc100, grimar, jvesely, nhaehnle, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74433
Georgii Rymar