Summary:
zlib support was hard-wired to off for (non-cygwin) windows targets.
This disables some features, such as reading debug info from compressed
dwarf sections.
This has been this way since zlib support was added in 2013 (r180083),
but there is no obvious reason for that. Zlib is perfectly capable of
being compiled for windows (it even has a cmake file that works out of
the box).
This enables one to turn on zlib support on windows, if one has zlib
avaliable.
Reviewers: rnk, beanz
Subscribers: mgorny, aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D40655
llvm-svn: 319533
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
llvm-svn: 318356
Original commit message:
"[cmake] Use find_package to discover zlib
This allows us to use standard cmake utilities to point to non-system zlib
locations.
Patch by Oksana Shadura and me (D39002)."
The new patch brings back the old behavior in the cases where find_package
cannot find zlib.
llvm-svn: 316150
- Rename AMDGPUCodeObjectMetadata to AMDGPUMetadata (PAL metadata will be included in this file in the follow up change)
- Rename AMDGPUCodeObjectMetadataStreamer to AMDGPUHSAMetadataStreamer
- Introduce HSAMD namespace
- Other minor name changes in function and test names
llvm-svn: 315522
I want to reuse this code in SimplifyDemandedBits handling of Add/Sub. This will make that easier.
Wonder if we should use it in SelectionDAG's computeKnownBits too.
Differential Revision: https://reviews.llvm.org/D36433
llvm-svn: 310378
Summary:
Previously were in support. Since many many things depend on support,
were all forced to also depend on libxml2, which we only want in a few cases.
This puts all the libxml2 deps in a separate lib to be used only in a few
places.
Reviewers: ruiu, thakis, rnk
Subscribers: mgorny, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D35819
llvm-svn: 309070
Summary: Implement parsing and writing of a single xml manifest file.
Subscribers: mgorny, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D35425
llvm-svn: 308679
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
Often you have an array and you just want to use it. With the current
design, you have to first construct a `BinaryByteStream`, and then create
a `BinaryStreamRef` from it. Worse, the `BinaryStreamRef` holds a pointer
to the `BinaryByteStream`, so you can't just create a temporary one to
appease the compiler, you have to actually hold onto both the `ArrayRef`
as well as the `BinaryByteStream` *AND* the `BinaryStreamReader` on top of
that. This makes for very cumbersome code, often requiring one to store a
`BinaryByteStream` in a class just to circumvent this.
At the cost of some added complexity (not exposed to users, but internal
to the library), we can do better than this. This patch allows us to
construct `BinaryStreamReaders` and `BinaryStreamWriters` directly from
source data (e.g. `StringRef`, `MutableArrayRef<uint8_t>`, etc). Not only
does this reduce the amount of code you have to type and make it more
obvious how to use it, but it solves real lifetime issues when it's
inconvenient to hold onto a `BinaryByteStream` for a long time.
The additional complexity is in the form of an added layer of indirection.
Whereas before we simply stored a `BinaryStream*` in the ref, we now store
both a `BinaryStream*` **and** a `std::shared_ptr<BinaryStream>`. When
the user wants to construct a `BinaryStreamRef` directly from an
`ArrayRef` etc, we allocate an internal object that holds ownership over a
`BinaryByteStream` and forwards all calls, and store this in the
`shared_ptr<>`. This also maintains the ref semantics, as you can copy it
by value and references refer to the same underlying stream -- the one
being held in the object stored in the `shared_ptr`.
Differential Revision: https://reviews.llvm.org/D33293
llvm-svn: 303294
libraries are properly unloaded when llvm_shutdown is called.
Summary:
This was mostly affecting usage of the JIT, where storing the library handles in
a set made iteration unordered/undefined. This lead to disagreement between the
JIT and native code as to what the address and implementation of particularly on
Windows with stdlib functions:
JIT: putenv_s("TEST", "VALUE") // called msvcrt.dll, putenv_s
JIT: getenv("TEST") -> "VALUE" // called msvcrt.dll, getenv
Native: getenv("TEST") -> NULL // called ucrt.dll, getenv
Also fixed is the issue of DynamicLibrary::getPermanentLibrary(0,0) on Windows
not giving priority to the process' symbols as it did on Unix.
Reviewers: chapuni, v.g.vassilev, lhames
Reviewed By: lhames
Subscribers: danalbert, srhines, mgorny, vsk, llvm-commits
Differential Revision: https://reviews.llvm.org/D30107
llvm-svn: 301562
libraries are properly unloaded when llvm_shutdown is called.
Summary:
This was mostly affecting usage of the JIT, where storing the library handles in
a set made iteration unordered/undefined. This lead to disagreement between the
JIT and native code as to what the address and implementation of particularly on
Windows with stdlib functions:
JIT: putenv_s("TEST", "VALUE") // called msvcrt.dll, putenv_s
JIT: getenv("TEST") -> "VALUE" // called msvcrt.dll, getenv
Native: getenv("TEST") -> NULL // called ucrt.dll, getenv
Also fixed is the issue of DynamicLibrary::getPermanentLibrary(0,0) on Windows
not giving priority to the process' symbols as it did on Unix.
Reviewers: chapuni, v.g.vassilev, lhames
Reviewed By: lhames
Subscribers: danalbert, srhines, mgorny, vsk, llvm-commits
Differential Revision: https://reviews.llvm.org/D30107
llvm-svn: 301236
The changes are causing the i686-mingw32 build to fail.
This reverts commit r301153, and the changes for a separate warning on i686-mingw32 in r301155 and r301156.
llvm-svn: 301157
libraries are properly unloaded when llvm_shutdown is called.
Summary:
This was mostly affecting usage of the JIT, where storing the library handles in
a set made iteration unordered/undefined. This lead to disagreement between the
JIT and native code as to what the address and implementation of particularly on
Windows with stdlib functions:
JIT: putenv_s("TEST", "VALUE") // called msvcrt.dll, putenv_s
JIT: getenv("TEST") -> "VALUE" // called msvcrt.dll, getenv
Native: getenv("TEST") -> NULL // called ucrt.dll, getenv
Also fixed is the issue of DynamicLibrary::getPermanentLibrary(0,0) on Windows
not giving priority to the process' symbols as it did on Unix.
Reviewers: chapuni, v.g.vassilev, lhames
Reviewed By: lhames
Subscribers: danalbert, srhines, mgorny, vsk, llvm-commits
Differential Revision: https://reviews.llvm.org/D30107
llvm-svn: 301153
On FreeBSD backtrace is not part of libc and depends on libexecinfo
being available. Instead of using manual checks we can use the builtin
CMake module FindBacktrace.cmake to detect availability of backtrace()
in a portable way.
Patch By: Alex Richardson
Differential Revision: https://reviews.llvm.org/D27143
llvm-svn: 300062
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
The problem with the previous commit appears to have been that TableGen was including CodeGen/LowLevelType.h instead of Support/LowLevelTypeImpl.h.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297241
More module problems. This time it only showed up in the stage 2 compile of
clang-x86_64-linux-selfhost-modules-2 but not the stage 1 compile.
Somehow, this change causes the build to need Attributes.gen before it's been
generated.
llvm-svn: 297188
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297177
After several smaller patches to get most of the core improvements
finished up, this patch is a straight move and header fixup of
the source.
Differential Revision: https://reviews.llvm.org/D30266
llvm-svn: 296810
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 296474
Summary:
We have support for bisection, and bugpoint can reduce testcases
often to a single pass. But that doesn't help reduce it to a single
transform by a single pass. Which debug counting lets us do.
Debug counting lets you instrument a pass so that it only executes a
certain thing (rwhatever you want) after skipping it a certain time of
times, and then only does a certain number of executions before saying
"skip" again.
To make it concrete, for predicateinfo, if i instrument use renaming,
i can make it so it skips renaming the first N uses, renames the next
N, and then skips the rest.
This lets you narrow down a miscompilation to, often, a single
transformation, and then also debug it (by using the same command line
parameters).
Reviewers: chandlerc, davide, mehdi_amini
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D29998
llvm-svn: 295593
LLVM defines `PTHREAD_LIB` which is used by AddLLVM.cmake and various projects
to correctly link the threading library when needed. Unfortunately
`PTHREAD_LIB` is defined by LLVM's `config-ix.cmake` file which isn't installed
and therefore can't be used when configuring out-of-tree builds. This causes
such builds to fail since `pthread` isn't being correctly linked.
This patch attempts to fix that problem by renaming and exporting
`LLVM_PTHREAD_LIB` as part of`LLVMConfig.cmake`. I renamed `PTHREAD_LIB`
because It seemed likely to cause collisions with downstream users of
`LLVMConfig.cmake`.
llvm-svn: 294690
In LLD, we create cpio archive files for --reproduce command.
cpio was not a bad choice because it is very easy to create, but
it was sometimes hard to use because people are not familiar with
cpio command.
I noticed that creating a tar archive isn't as hard as I thought.
So I implemented it in this patch.
Differential Revision: https://reviews.llvm.org/D28091
llvm-svn: 291209
Summary:
This class is unnecessary.
Its comment indicated that it was a compile error to allocate an
instance of a class that inherits from RefCountedBaseVPTR on the stack.
This may have been true at one point, but it's not today.
Moreover you really do not want to allocate *any* refcounted object on
the stack, vptrs or not, so if we did have a way to prevent these
objects from being stack-allocated, we'd want to apply it to regular
RefCountedBase too, obviating the need for a separate RefCountedBaseVPTR
class.
It seems that the main way RefCountedBaseVPTR provides safety is by
making its subclass's destructor virtual. This may have been helpful at
one point, but these days clang will emit an error if you define a class
with virtual functions that inherits from RefCountedBase but doesn't
have a virtual destructor.
Reviewers: compnerd, dblaikie
Subscribers: cfe-commits, klimek, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D28162
llvm-svn: 290717
GlobPattern is a class to handle glob pattern matching. Currently
only LLD is using that, but technically that feature is not specific
to linkers, so in this patch I move that file to LLVM.
Differential Revision: https://reviews.llvm.org/D27969
llvm-svn: 290212
Summary:
it's often the case when the rules in the SpecialCaseList
are of the form hel.o*bar. That gives us a chance to build
trigram index to quickly discard 99% of inputs without
running a full regex. A similar idea was used in Google Code Search
as described in the blog post:
https://swtch.com/~rsc/regexp/regexp4.html
The check is defeated, if there's at least one regex
more complicated than that. In this case, all inputs
will go through the regex. That said, the real-world
rules are often simple or can be simplied. That considerably
speeds up compiling Chromium with CFI and UBSan.
As measured on Chromium's content_message_generator.cc:
before, CFI: 44 s
after, CFI: 23 s
after, CFI, no blacklist: 23 s (~1% slower, but 3 runs were unable to show the difference)
after, regular compilation to bitcode: 23 s
Reviewers: pcc
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D27188
llvm-svn: 288303
Summary:
All uses have been replaced by appropriate std::chrono types, and the class is
now unused.
Reviewers: zturner, mehdi_amini
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D26447
llvm-svn: 287094
This introduces a new type-safe general purpose formatting
library. It provides compile-time type safety, does not require
a format specifier (since the type is deduced), and provides
mechanisms for extending the format capability to user defined
types, and overriding the formatting behavior for existing types.
This patch additionally adds documentation for the API to the
LLVM programmer's manual.
Mailing List Thread:
http://lists.llvm.org/pipermail/llvm-dev/2016-October/105836.html
Differential Revision: https://reviews.llvm.org/D25587
llvm-svn: 286682
This is a resubmission of r284590. The mingw build should be fixed now. The
problem was we were matching time_t with _localtime_64s, which was incorrect on
_USE_32BIT_TIME_T systems. Instead I use localtime_s, which should always
evaluate to the correct function.
llvm-svn: 284720
This reverts commit r284590 as it fails on the mingw buildbot. I think I know the
fix, but I cannot test it right now. Will reapply when I verify it works ok.
This reverts r284590.
llvm-svn: 284615
Summary:
std::chrono mostly covers the functionality of llvm::sys::TimeValue and
lldb_private::TimeValue. This header adds a bit of utility functions and
typedefs, which make the usage of the library and porting code from TimeValues
easier.
Rationale:
- TimePoint typedef - precision of system_clock is implementation defined -
using a well-defined precision helps maintain consistency between platforms,
makes it interact better with existing TimeValue classes, and avoids cases
there a time point is implicitly convertible to a specific precision on some
platforms but not on others.
- system_clock::to_time_t only accepts time_points with the default system
precision (even though time_t has only second precision on all platforms we
support). To avoid the need for explicit casts, I have added a toTimeT()
wrapper function. toTimePoint(time_t) was not strictly necessary, but I have
added it for symmetry.
Reviewers: zturner, mehdi_amini
Subscribers: beanz, mgorny, llvm-commits, modocache
Differential Revision: https://reviews.llvm.org/D25416
llvm-svn: 284590
Low level functionality to format numbers were embedded in the
implementation of raw_ostream. I have need to use these through
an interface other than the overloaded stream operators, so they
need to be raised to a level that they can be used from either
raw_ostream operators or other code.
llvm-svn: 283921
Summary:
This lets people link against LLVM and their own version of the UTF
library.
I determined this only affects llvm, clang, lld, and lldb by running
$ git grep -wl 'UTF[0-9]\+\|\bConvertUTF\bisLegalUTF\|getNumBytesFor' | cut -f 1 -d '/' | sort | uniq
clang
lld
lldb
llvm
Tested with
ninja lldb
ninja check-clang check-llvm check-lld
(ninja check-lldb doesn't complete for me with or without this patch.)
Reviewers: rnk
Subscribers: klimek, beanz, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D24996
llvm-svn: 282822
Xcode and MSVC list the headers and source files for each library.
LLVMSupport lists included the source files for ADT but not the headers. This
add the ADT headers so that they are browsable by the UI.
llvm-svn: 279470
At some point we're going to need libObject to have this dependency, but as it is now this is causing too many headaches. This commit will reduce the linkage to just llvm-objdump where it is strictly needed, and we'll cross the libObject bridge later when we need it.
llvm-svn: 270866
This should fix PR27855. We have some terrible hacks in the CMake to add linking SYSTEM_LIBS to all tools. I think we need a better way to do this in the future.
llvm-svn: 270605
We wish to re-use this from llvm-pdbdump, and it provides a nice
way to print structured data in scoped format that could prove
useful for many other dumping tools as well. Moving to support
and changing name to ScopedPrinter to better reflect its purpose.
llvm-svn: 268342
Incremental LTO will usea cache to store object files.
This patch handles the pruning part of the cache, exposing
a few knobs:
- Pruning interval: the implementation keeps a "timestamp" file in the
directory and will scan it only after a given interval since the
last modification of the timestamp file. This is for performance
purpose, we don't want to scan continuously the folder.
- Entry expiration: this is the time after which a file that hasn't
been used is remove from the cache.
- Maximum size: expressed in percentage of the available disk space,
it helps to avoid that we blow up the disk space.
http://reviews.llvm.org/D18422
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265209
Provide a class to generate a SHA1 from a sequence of bytes, and
a convenience raw_ostream adaptor.
This will be used to provide a "build-id" by hashing the Module
block when writing bitcode. ThinLTO will use this information for
incremental build.
Reapply r265094 which was reverted in r265102 because it broke
MSVC bots (constexpr is not supported).
http://reviews.llvm.org/D16325
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265107
This reverts commit r265096, r265095, and r265094.
Windows build is broken, and the validation does not pass.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265102
Provide a class to generate a SHA1 from a sequence of bytes, and
a convenience raw_ostream adaptor.
This will be used to provide a "build-id" by hashing the Module
block when writing bitcode. ThinLTO will use this information for
incremental build.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265094
This is a temporary crutch to enable code that currently uses std::error_code
to be incrementally moved over to Error. Requiring all Error instances be
convertible enables clients to call errorToErrorCode on any error (not just
ECErrors created by conversion *from* an error_code).
This patch also moves code for Error from ErrorHandling.cpp into a new
Error.cpp file.
llvm-svn: 264221
This patch updates cmake build scripts to build on Haiku. It adds Haiku x86_64 to config.guess.
Please consider reviewing.
Pathc by Jérôme Duval.
llvm-svn: 262038
Summary:
This patch adds Windows support for a few of the llvm-config commands,
including cflags, ldflags, libs, and system-libs.
Currently llvm-config is untested, so this patch adds tests for the
commands that it fixes as well.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16762
llvm-svn: 260263
This is a very simple implementation of a thread pool using C++11
thread. It accepts any std::function<void()> for asynchronous
execution. Individual task can be synchronize using the returned
future, or the client can block on the full queue completion.
In case LLVM is configured with Threading disabled, it falls back
to sequential execution using std::async with launch:deferred.
This is intended to support parallelism for ThinLTO processing in
linker plugin, but is generic enough for any other uses.
This is a recommit of r255444 ; trying to workaround a bug in the
MSVC 2013 standard library. I think I was hit by:
http://connect.microsoft.com/VisualStudio/feedbackdetail/view/791185/std-packaged-task-t-where-t-is-void-or-a-reference-class-are-not-movable
Recommit of r255589, trying to please g++ as well.
Differential Revision: http://reviews.llvm.org/D15464
From: mehdi_amini <mehdi_amini@91177308-0d34-0410-b5e6-96231b3b80d8>
llvm-svn: 255593
This is a very simple implementation of a thread pool using C++11
thread. It accepts any std::function<void()> for asynchronous
execution. Individual task can be synchronize using the returned
future, or the client can block on the full queue completion.
In case LLVM is configured with Threading disabled, it falls back
to sequential execution using std::async with launch:deferred.
This is intended to support parallelism for ThinLTO processing in
linker plugin, but is generic enough for any other uses.
This is a recommit of r255444 ; trying to workaround a bug in the
MSVC 2013 standard library. I think I was hit by:
http://connect.microsoft.com/VisualStudio/feedbackdetail/view/791185/std-packaged-task-t-where-t-is-void-or-a-reference-class-are-not-movable
Differential Revision: http://reviews.llvm.org/D15464
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 255589
This is a very simple implementation of a thread pool using C++11
thread. It accepts any std::function<void()> for asynchronous
execution. Individual task can be synchronize using the returned
future, or the client can block on the full queue completion.
In case LLVM is configured with Threading disabled, it falls back
to sequential execution using std::async with launch:deferred.
This is intended to support parallelism for ThinLTO processing in
linker plugin, but is generic enough for any other uses.
Differential Revision: http://reviews.llvm.org/D15464
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 255444
This list is produced by llvm-config --system-libs to be used
by external programs using the llvm libraries, such as creduce.
In r250501 llvm/Support/Windows/Path.inc started to use the constant
FOLDERID_Profile from libuuid.
llvm-svn: 251201
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change. Thanks go to Pavel Labath for fixing LLDB for me.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247692
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247683
COFF sections are accompanied with an auxiliary symbol which includes a
checksum. This checksum used to be filled with just zero but this seems
to upset LINK.exe when it is processing a /INCREMENTAL link job.
Instead, fill the CheckSum field with the JamCRC of the section
contents. This matches MSVC's behavior.
This fixes PR19666.
N.B. A rather simple implementation of JamCRC is given. It implements
a byte-wise calculation using the method given by Sarwate. There are
implementations with higher throughput like slice-by-eight and making
use of PCLMULQDQ. We can switch to one of those techniques if it turns
out to be a significant use of time.
llvm-svn: 246590
This patch changes linkage with dbghlp.dll for clang from static (at load time)
to on demand (at the first use of required functions). Clang uses dbghlp.dll
only in minor use-cases. First of all in case of crash and in case of plugin load.
The dbghlp.dll library can be absent on system. In this case clang will fail
to load. With lazy load of dbghlp.dll clang can work even if dbghlp.dll
is not available.
Differential Revision: http://reviews.llvm.org/D10737
llvm-svn: 241271
StringSaver now always saves to a BumpPtrAllocator.
The only reason for having the virtual saveImpl is so lld can have a
thread safe version.
The reason for the distinct BumpPtrStringSaver class is to avoid the
virtual destructor.
llvm-svn: 239669
This new class in a global context contain arch-specific knowledge in order
to provide LLVM libraries, tools and projects with the ability to understand
the architectures. For now, only FPU, ARCH and ARCH extensions on ARM are
supported.
Current behaviour it to parse from free-text to enum values and back, so that
all users can share the same parser and codes. This simplifies a lot both the
ASM/Obj streamers in the back-end (where this came from), and the front-end
parsers for command line arguments (where this is going to be used next).
The previous implementation, using .def/.h includes is deprecated due to its
inflexibility to be built without the backend support and for being too
cumbersome. As more architectures join this scheme, and as more features of
such architectures are added (such as hardware features, type sizes, etc) into
a full blown TargetDescription class, having a set of classes is the most
sane implementation.
The ultimate goal of this refactor both LLVM's and Clang's target description
classes into one unique interface, so that we can de-duplicate and standardise
the descriptions, as well as make it available for other front-ends, tools,
etc.
The FPU parsing for command line options in Clang has been converted to use
this new library and a number of aliases were added for compatibility:
* A bogus neon-vfpv3 alias (neon defaults to vfp3)
* armv5/v6
* {fp4/fp5}-{sp/dp}-d16
Next steps:
* Port Clang's ARCH/EXT parsing to use this library.
* Create a TableGen back-end to generate this information.
* Run this TableGen process regardless of which back-ends are built.
* Expose more information and rename it to TargetDescription.
* Continue re-factoring Clang to use as much of it as possible.
llvm-svn: 236900
ole32 is considered a default library with MSVC, but apparently
not with MinGW. Since we use CoInitialize, we need to explicitly
link against it in LLVMSupport for a MinGW build.
llvm-svn: 236654
This allows IDEs to recognize the entire set of header files for
each of the core LLVM projects.
Differential Revision: http://reviews.llvm.org/D7526
Reviewed By: Chris Bieneman
llvm-svn: 228798
Since header files are not compilation units, CMake does not require
you to specify them in the CMakeLists.txt file. As a result, unless a
header file is explicitly added, CMake won't know about it, and when
generating IDE-based projects, CMake won't put the header files into
the IDE project. LLVM currently tries to deal with this in two ways:
1) It looks for all .h files that are in the project directory, and
adds those.
2) llvm_add_library() understands the ADDITIONAL_HEADERS argument,
which allows one to list an arbitrary list of headers.
This patch takes things one step further. It adds the ability for
llvm_add_library() to take an ADDITIONAL_HEADER_DIRS argument, which
will specify a list of folders which CMake will glob for header files.
Furthermore, it will glob not only for .h files, but also for .inc
files.
Included in this CL is an update to one of the existing users of
ADDITIONAL_HEADERS to use this new argument instead, to serve as an
illustration of how this cleans up the CMake.
The big advantage of this new approach is that until now, there was no
way for the IDE projects to locate the header files that are in the
include tree. In other words, if you are in, for example,
lib/DebugInfo/DWARF, the corresponding includes for this project will
be located under include/llvm/DebugInfo/DWARF. Now, in the
CMakeLists.txt for lib/DebugInfo/DWARF, you can simply write:
ADDITIONAL_HEADER_DIRS
../../include/llvm/DebugInfo/DWARF
as an argument to llvm_add_library(), and all header files will get
added to the IDE project.
Differential Revision: http://reviews.llvm.org/D7460
Reviewed By: Chris Bieneman
llvm-svn: 228670
Every MemoryObject is a StreamableMemoryObject since the removal of
StringRefMemoryObject, so just merge the two.
I will clean up the MemoryObject interface in the upcoming commits.
llvm-svn: 221766
Commit 220932 caused crash when building clang-tblgen on aarch64 debian target,
so it's blocking all daily tests.
The std::call_once implementation in pthread has bug for aarch64 debian.
llvm-svn: 221331
Summary:
This patch adds an llvm_call_once which is a wrapper around std::call_once on platforms where it is available and devoid of bugs. The patch also migrates the ManagedStatic mutex to be allocated using llvm_call_once.
These changes are philosophically equivalent to the changes added in r219638, which were reverted due to a hang on Win32 which was the result of a bug in the Windows implementation of std::call_once.
Reviewers: aaron.ballman, chapuni, chandlerc, rnk
Reviewed By: rnk
Subscribers: majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D5922
llvm-svn: 220932
llvm::huge_valf is defined in a header file, so it is initialized
multiple times in every compiled unit upon program startup.
With non-VC compilers huge_valf is set to a HUGE_VALF which the
compiler can probably optimize out.
With VC numeric_limits<float>::infinity() does not return a number
but a runtime structure member which therotically may change
between calls so the compiler does not optimize out the
initialization and it happens many times. It can be easily seen by
placing a breakpoint on the initialization line.
This patch moves llvm::huge_valf initialization to a source file
instead of the header.
llvm-svn: 218567
it breaks the modules builds (where CallGraph.h can be quite reasonably
transitively included by an unimported portion of a module, and CallGraph.cpp
not linked in), and appears to have been entirely redundant since PR780 was
fixed back in 2008.
If this breaks anything, please revert; I have only tested this with a single
configuration, and it's possible that this is still somehow fixing something
(though I doubt it, since no other similar file uses this mechanism any more).
llvm-svn: 215142
This optional dependency on the udis86 library was added some time back to aid
JIT development, but doesn't make much sense to link into LLVM binaries these
days.
llvm-svn: 213300
Turn llvm::SpecialCaseList into a simple class that parses text files in
a specified format and knows nothing about LLVM IR. Move this class into
LLVMSupport library. Implement two users of this class:
* DFSanABIList in DFSan instrumentation pass.
* SanitizerBlacklist in Clang CodeGen library.
The latter will be modified to use actual source-level information from frontend
(source file names) instead of unstable LLVM IR things (LLVM Module identifier).
Remove dependency edge from ClangCodeGen/ClangDriver to LLVMTransformUtils.
No functionality change.
llvm-svn: 212643
Provides an abstraction for a random number generator (RNG) that produces a stream of pseudo-random numbers.
The current implementation uses C++11 facilities and is therefore not cryptographically secure.
The RNG is salted with the text of the current command line invocation.
In addition, a user may specify a seed (reproducible builds).
In clang, the seed can be set via
-frandom-seed=X
In the back end, the seed can be set via
-rng-seed=X
This is the llvm part of the patch.
clang part: D3391
URL: http://reviews.llvm.org/D3390
Author: yln
I'm landing this for the second time, it broke Windows bots the first time around.
llvm-svn: 211705
Summary:
Provides an abstraction for a random number generator (RNG) that produces a stream of pseudo-random numbers.
The current implementation uses C++11 facilities and is therefore not cryptographically secure.
The RNG is salted with the text of the current command line invocation.
In addition, a user may specify a seed (reproducible builds).
In clang, the seed can be set via
-frandom-seed=X
In the back end, the seed can be set via
-rng-seed=X
This is the llvm part of the patch.
clang part: D3391
Reviewers: ahomescu, rinon, nicholas, jfb
Reviewed By: jfb
Subscribers: jfb, perl
Differential Revision: http://reviews.llvm.org/D3390
llvm-svn: 211145
The idea of this patch is to turn llvm/Support/system_error.h into a
transitional header that just brings in the erorr_code api to the llvm
namespace. I will remove it shortly afterwards.
The cases where the general idea needed some tweaking:
* std::errc is a namespace in msvc, so we cannot use "using std::errc". I could
add an #ifdef, but there were not that many uses, so I just added std:: to
them in this patch.
* Template specialization had to be moved to the std namespace in this
patch set already.
* The msvc implementation of default_error_condition doesn't seem to
provide the same transformations as we need. Not too surprising since
the standard doesn't actually say what "equivalent" means. I fixed the
problem by keeping our old mapping and using it at error_code
construction time.
Despite these shortcomings I think this is still a good thing. Some reasons:
* The different implementations of system_error might improve over time.
* It removes 925 lines of code from llvm already.
* It removes 6313 bytes from the text segment of the clang binary when
it is built with gcc and 2816 bytes when building with clang and
libstdc++.
llvm-svn: 210687
Introduce the support structures necessary to deal with the Windows ARM EH data.
These definitions are extremely aggressive about assertions to aid future use
for generation of the entries and subsequent decoding.
The names for the various fields are meant to reflect the names used by the
Visual Studio toolchain to aid communication.
Due to the complexity in reading a few of the values, there are a couple of
additional utility functions to decode the information.
In general, there are two ways to encode the unwinding information:
- packed, which places the data inline into the
_IMAGE_ARM_RUNTIME_FUNCTION_ENTRY structure.
- unpacked, which places the data into auxiliary structures placed into the
.xdata section.
The set of structures allow reading of data in either encoding, with the minor
caveat that epilogue scopes need to be decoded manually by constructing the
structure from the data returned by the RuntimeFunction structure.
These definitions are meant for read-only access at the current point as the
first use of them will be to decode the exception information.
llvm-svn: 209998
a bit surprising, as the class is almost entirely abstracted away from
any particular IR, however it encodes the comparsion predicates which
mutate ranges as ICmp predicate codes. This is reasonable as they're
used for both instructions and constants. Thus, it belongs in the IR
library with instructions and constants.
llvm-svn: 202838
target_link_libraries(INTERFACE) doesn't bring inter-target dependencies in add_library,
although final targets have dependencies to whole dependent libraries.
It makes most libraries can be built in parallel.
target_link_libraries(PRIVATE) is used to shaared library.
Each dependent library is linked to the target.so, and its user will not see its grandchildren.
For example,
- libclang.so has sufficient libclang*.a(s).
- c-index-test requires just only libclang.so.
FIXME: lld is tweaked minimally. Adding INTERFACE in each library would be better thing.
llvm-svn: 202241
The LLVMSupport library implementation consolidates all dependencies on
system libraries. Move the logic gathering system libraries out of
'cmake/modules/LLVM-Config.cmake' and into 'lib/Support/CMakeLists.txt'.
Use the target_link_libraries() command there to tell CMake about the
link dependencies of the LLVMSupport implementation. CMake will
automatically propagate this to all targets that link LLVMSupport
directly or indirectly.
We still need to build knowledge of system library dependencies into
'llvm-config'. Store the list of libraries needed in a property on
LLVMSupport and teach 'tools/llvm-config/CMakeLists.txt' to retrieve it
from there.
Drop all calls to 'link_system_libs' and 'get_system_libs' from our
CMake code. Replace their implementations with a warning that explains
the calls are no longer necessary. Also drop from 'LLVMConfig.cmake'
the HAVE_* and related variables that were published there only to allow
'get_system_libs' to run outside our build process.
Contributed by Brad King.
llvm-svn: 201969
ADDITIONAL_HEADERS is intended to add header files for IDEs as hint.
For example:
add_llvm_library(LLVMSupport
Host.cpp
ADDITIONAL_HEADERS
Unix/Host.inc
Windows/Host.inc
)
llvm-svn: 199639
This moves the ARM build attributes definitions and support routines into the
Support library. The support routines simply permit the conversion of the value
to and from a string representation.
The movement is prompted in order to permit access to the constants and string
representations from readobj in order to facilitate decoding of the attributes
section.
llvm-svn: 199575
Pavel Labath