When linking a Debug build clang (265MiB SHF_ALLOC sections, 920MiB uncompressed
debug info), in a --threads=1 link "Compress debug sections" takes 2/3 time and
in a --threads=8 link "Compress debug sections" takes ~70% time.
This patch splits a section into 1MiB shards and calls zlib `deflake` parallelly.
DEFLATE blocks are a bit sequence. We need to ensure every shard starts
at a byte boundary for concatenation. We use Z_SYNC_FLUSH for all shards
but the last to flush the output to a byte boundary. (Z_FULL_FLUSH can
be used as well, but Z_FULL_FLUSH clears the hash table which just
wastes time.)
The last block requires the BFINAL flag. We call deflate with Z_FINISH
to set the flag as well as flush the output to a byte boundary. Under
the hood, all of Z_SYNC_FLUSH, Z_FULL_FLUSH, and Z_FINISH emit a
non-compressed block (called stored block in zlib). RFC1951 says "Any
bits of input up to the next byte boundary are ignored."
In a --threads=8 link, "Compress debug sections" is 5.7x as fast and the total
speed is 2.54x. Because the hash table for one shard is not shared with the next
shard, the output is slightly larger. Better compression ratio can be achieved
by preloading the window size from the previous shard as dictionary
(`deflateSetDictionary`), but that is overkill.
```
# 1MiB shards
% bloaty clang.new -- clang.old
FILE SIZE VM SIZE
-------------- --------------
+0.3% +129Ki [ = ] 0 .debug_str
+0.1% +105Ki [ = ] 0 .debug_info
+0.3% +101Ki [ = ] 0 .debug_line
+0.2% +2.66Ki [ = ] 0 .debug_abbrev
+0.0% +1.19Ki [ = ] 0 .debug_ranges
+0.1% +341Ki [ = ] 0 TOTAL
# 2MiB shards
% bloaty clang.new -- clang.old
FILE SIZE VM SIZE
-------------- --------------
+0.2% +74.2Ki [ = ] 0 .debug_line
+0.1% +72.3Ki [ = ] 0 .debug_str
+0.0% +69.9Ki [ = ] 0 .debug_info
+0.1% +976 [ = ] 0 .debug_abbrev
+0.0% +882 [ = ] 0 .debug_ranges
+0.0% +218Ki [ = ] 0 TOTAL
```
Bonus in not using zlib::compress
* we can compress a debug section larger than 4GiB
* peak memory usage is lower because for most shards the output size is less
than 50% input size (all less than 55% for a large binary I tested, but
decreasing the initial output size does not decrease memory usage)
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D117853
The `intrinsics_gen` target exists in the CMake exports since r309389
(see LLVMConfig.cmake.in), hence projects can depend on `intrinsics_gen`
even it they are built separately from LLVM.
Reviewed By: MaskRay, JDevlieghere
Differential Revision: https://reviews.llvm.org/D83454
down to pass builder in ltobackend.
Currently CodeGenOpts like UnrollLoops/VectorizeLoop/VectorizeSLP in clang
are not passed down to pass builder in ltobackend when new pass manager is
used. This is inconsistent with the behavior when new pass manager is used
and thinlto is not used. Such inconsistency causes slp vectorization pass
not being enabled in ltobackend for O3 + thinlto right now. This patch
fixes that.
Differential Revision: https://reviews.llvm.org/D72386
When missing an extern "C" declaration, an undefined reference may be
mangled while the definition is not. Suggest the missing
extern "C" and the base name.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D69592
The --fix-cortex-a8 option implements a linker workaround for the
coretex-a8 erratum 657417. A summary of the erratum conditions is:
- A 32-bit Thumb-2 branch instruction B.w, Bcc.w, BL, BLX spans two
4KiB regions.
- The destination of the branch is to the first 4KiB region.
- The instruction before the branch is a 32-bit Thumb-2 non-branch
instruction.
The linker fix is to redirect the branch to a patch not in the first
4KiB region. The patch forwards the branch on to its target.
The cortex-a8, is an old CPU, with the first implementation of this
workaround in ld.bfd appearing in 2009. The cortex-a8 has been used in
early Android Phones and there are some critical applications that still
need to run on a cortex-a8 that have the erratum. The patch is applied
roughly 10 times on LLD and 20 on Clang when they are built with
--fix-cortex-a8 on an Arm system.
The formal erratum description is avaliable in the ARM Core Cortex-A8
(AT400/AT401) Errata Notice document. This is available from Arm on
request but it seems to be findable via a web search.
Differential Revision: https://reviews.llvm.org/D67284
llvm-svn: 371965
Patch by Michael Skvortsov!
This change adds a basic support for linking static MSP430 ELF code.
Implemented relocation types are intended to correspond to the BFD.
Differential revision: https://reviews.llvm.org/D56535
llvm-svn: 350819
These files used to contain classes and functions for .gdb_index,
but they are moved to SyntheticSections.{cpp,h}, so the name is now
irrelevant.
llvm-svn: 342299
Patch by PkmX.
This patch makes lld recognize RISC-V target and implements basic
relocation for RV32/RV64 (and RVC). This should be necessary for static
linking ELF applications.
The ABI documentation for RISC-V can be found at:
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md.
Note that the documentation is far from complete so we had to figure out
some details from bfd.
The patch should be pretty straightforward. Some highlights:
- A new relocation Expr R_RISCV_PC_INDIRECT is added. This is needed as
the low part of a PC-relative relocation is linked to the corresponding
high part (auipc), see:
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md#pc-relative-symbol-addresses
- LLVM's MC support for RISC-V is very incomplete (we are working on
this), so tests are given in objectyaml format with the original
assembly included in the comments. Once we have complete support for
RISC-V in MC, we can switch to llvm-as/llvm-objdump.
- We don't support linker relaxation for now as it requires greater
changes to lld that is beyond the scope of this patch. Once this is
accepted we can start to work on adding relaxation to lld.
Differential Revision: https://reviews.llvm.org/D39322
llvm-svn: 339364
This should resolve the issue that lld build fails in some hosts
that uses case-insensitive file system.
Differential Revision: https://reviews.llvm.org/D43788
llvm-svn: 326339
Add a new file AArch64ErrataFix.cpp that implements the logic to scan for
the Cortex-A53 Erratum 843419. This involves finding all the executable
code, disassembling the instructions that might trigger the erratum and
reporting a message if the sequence is detected.
At this stage we do not attempt to fix the erratum, this functionality
will be added in a later patch. See D36749 for proposal.
Differential Revision: https://reviews.llvm.org/D36742
llvm-svn: 319780
Summary:
The COFF linker and the ELF linker have long had similar but separate
Error.h and Error.cpp files to implement error handling. This change
introduces new error handling code in Common/ErrorHandler.h, changes the
COFF and ELF linkers to use it, and removes the old, separate
implementations.
Reviewers: ruiu
Reviewed By: ruiu
Subscribers: smeenai, jyknight, emaste, sdardis, nemanjai, nhaehnle, mgorny, javed.absar, kbarton, fedor.sergeev, llvm-commits
Differential Revision: https://reviews.llvm.org/D39259
llvm-svn: 316624
Summary:
This will allow using the functionality from other linkers. It is also
a prerequisite for sharing the error logging code.
Reviewers: ruiu
Reviewed By: ruiu
Subscribers: emaste, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D38822
llvm-svn: 315725
I think it is not defined what would happen to detached threads
when the main thread tries to exit. That means it was not guaranteed
that unlinkAsync correctly removes a temporary file. It was also
reported that this unlinkAsync caused a crash on Windows.
This patch adds a few new functions so that the main thread always
waits for non-main threads before exitting.
I don't actually like the new two functions, runBackground and
waitForBackgroundThreads, because it looks like it is a bit
overdesigned. After all, what we are doing with these functions
is to just remove a file.
An alternative would be to do fork(2) and make the child process
remove a file asynchronously. However, it has its own problems.
Correctly forking and reclaiming a resource using waitpid(2) is not
doable unless we know our process-wide settings (such as signal mask),
but we can't make any assumption on it when lld is embedded to other
process. So I chose to stick with threads instead of multi-processes.
Differential Revision: https://reviews.llvm.org/D38571
llvm-svn: 315033
New lld's files are spread under lib subdirectory, and it isn't easy
to find which files are actually maintained. This patch moves maintained
files to Common subdirectory.
Differential Revision: https://reviews.llvm.org/D37645
llvm-svn: 314719
Add support for the most common SPARC relocations.
Make DT_PLTGOT point to the PLT on SPARC.
Mark the PLT as executable on SPARC.
This adds a basic test that creates a SPARV9 executable
that invokes the exit system call on OpenBSD.
Patch by Mark Kettenis.
Differential Revision: https://reviews.llvm.org/D34618
llvm-svn: 306565
Target.cpp contains code for all the targets that LLD supports. It was
simple and easy, but as the number of supported targets increased,
it got messy.
This patch splits the file into per-target files under ELF/arch directory.
Differential Revision: https://reviews.llvm.org/D34222
llvm-svn: 305565
Without this, when building with shared BUILD_SHARED_LIBS=ON
I get errors such as:
lib/Core/Reader.cpp:40: error: undefined reference to
'llvm::identify_magic(llvm::StringRef)'
Differential Revision: https://reviews.llvm.org/D34004
llvm-svn: 304932
LinkerScript.cpp contains both the linker script processor and the
linker script parser. I put both into a single file, but the file grown
too large, so it's time to put them into two different files.
llvm-svn: 299515
LLVM defines `PTHREAD_LIB` which is used by AddLLVM.cmake and various projects
to correctly link the threading library when needed. Unfortunately
`PTHREAD_LIB` is defined by LLVM's `config-ix.cmake` file which isn't installed
and therefore can't be used when configuring out-of-tree builds. This causes
such builds to fail since `pthread` isn't being correctly linked.
This patch attempts to fix that problem by renaming and exporting
`LLVM_PTHREAD_LIB` as part of`LLVMConfig.cmake`. I renamed `PTHREAD_LIB`
because It seemed likely to cause collisions with downstream users of
`LLVMConfig.cmake`.
llvm-svn: 294690
I thought for a while about how to remove it, but it looks like we
can just copy the file for now. Of course I'm not happy about that,
but it's just less than 50 lines of code, and we already have
duplicate code in Error.h and some other places. I want to solve
them all at once later.
Differential Revision: https://reviews.llvm.org/D27819
llvm-svn: 290062
Enable building lld as a standalone project. This is motivated by the desire to
package lld for inclusion in a linux distribution. This allows building lld
against an existing paired llvm installation. Now that lld is usable on x86_64,
it makes sense to revive this configuration to allow distributions to package
it.
llvm-svn: 289421
This patch updates a couple places where add_dependencies was being explicitly called to add dependencies on intrinsics_gen to instead use the DEPENDS named parameter. This cleanup is needed for a patch I'm working on to add a dependency debugging mode to the build system.
llvm-svn: 287205
We are going to have many more classes for linker-synthesized
input sections, so it's worth to be added to a separate file
than to the file for regular input sections.
llvm-svn: 285740
Previously, we have a lot of BumpPtrAllocators, but all these
allocators virtually have the same lifetime because they are
not freed until the linker finishes its job. This patch aggregates
them into a single allocator.
Differential revision: https://reviews.llvm.org/D26042
llvm-svn: 285452
rL284708 introduces a link error when building with BUILD_SHARED_LIBS:
undefined reference to `llvm::DWARFContext::parseCompileUnits()'
undefined reference to `llvm::DWARFContextInMemory::DWARFContextInMemory(
llvm::object::ObjectFile const&,
llvm::LoadedObjectInfo const*)'
The functions are available in libDebugInfoDWARF, from llvm.
Patch by Visoiu Mistrih Francis
Differential revision: https://reviews.llvm.org/D25843
llvm-svn: 284810
In this patch partial gdb_index section is created.
For costructing the .gdb_index section 6 steps should be performed (details are in
SplitDebugInfo.cpp file header), this patch do first 3:
Creates proper section header.
Fills list of compilation units.
Types CU list area is not supposed to be supported, so it is ignored and therefore
can be treated as implemented either.
Differential revision: https://reviews.llvm.org/D24706
llvm-svn: 284708
Implemented by building an ELF file in memory.
elf, default, and binary match gold behavior.
Differential Revision: https://reviews.llvm.org/D24060
llvm-svn: 281108
Previously, we incrementally updated the reuslting flag as we check
file flags, so it was not very clear who is updating what flags.
This patch makes them pure functions -- that has no side effect and
don't update arguments to improve readability.
Now each function construct a patial result, and all resutls are then
bitwise-OR'ed to construct the final result.
This patch also creates a new file, Mips.cpp, to move all these
MIPS functions to a separate file.
Differential Revision: https://reviews.llvm.org/D23249
llvm-svn: 278042
This flag is implemented similarly to --reproduce in the ELF linker.
This patch implements /linkrepro by moving the cpio writer and associated
utility functions to lldCore, and using that implementation in both linkers.
One COFF-specific detail is that we store the object file from which the
resource files were created in our reproducer, rather than the resource
files themselves. This allows the reproducer to be used on non-Windows
systems for example.
Differential Revision: https://reviews.llvm.org/D22418
llvm-svn: 276719
The TinyPtrVector of const Thunk<ELFT>* in InputSections.h can cause
build failures on certain compiler/library combinations when Thunk<ELFT>
is not a complete type or is an abstract class. Fixed by making Thunk<ELFT>
non Abstract.
type or is an abstract class
llvm-svn: 274863
Generalise the Mips LA25 Thunk code and implement ARM and Thumb
interworking Thunks.
- Introduce a new module Thunks.cpp to store the Target Specific Thunk
implementations.
- DefinedRegular and Shared have a ThunkData field to record Thunk.
- A Target can have more than one type of Thunk.
- Support PC-relative calls to Thunks.
- Support Thunks to PLT entries.
- Existing Mips LA25 Thunk code integrated.
- Support for ARMv7A interworking Thunks.
Limitations:
- Only one Thunk per SymbolBody, this is sufficient for all currently
implemented Thunks.
- ARM thunks assume presence of V6T2 MOVT and MOVW instructions.
Differential revision: http://reviews.llvm.org/D21891
llvm-svn: 274836
This fixes PR28218. Thanks to Rafael for spotting a failure in
the SHARED_LIBS build!
Differential Revision: http://reviews.llvm.org/D21577
llvm-svn: 273451
Fangrui Song