Most architectures use .got instead of .got.plt, so switching the default can
minimize customization.
This fixes an issue for SPARC V9 which uses .got .
AVR, AMDGPU, and MSP430 don't seem to use _GLOBAL_OFFSET_TABLE_.
There used to be many cases where addends for Elf_Rel were not emitted in
the final object file (mostly when building for MIPS64 since the input .o
files use RELA but the output uses REL). These cases have been fixed since,
but this patch adds a check to ensure that the written values are correct.
It is based on a previous patch that I added to the CHERI fork of LLD since
we were using MIPS64 as a baseline. The work has now almost entirely
shifted to RISC-V and Arm Morello (which use Elf_Rela), but I thought
it would be useful to upstream our local changes anyway.
This patch adds a (hidden) command line flag --check-dynamic-relocations
that can be used to enable these checks. It is also on by default in
assertions builds for targets that handle all dynamic relocations kinds
that LLD can emit in Target::getImplicitAddend(). Currently this is
enabled for ARM, MIPS, and I386.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101450
The scope of R_TLS (TP offset relocation types (TPREL/TPOFF) used for the
local-exec TLS model) is actually narrower than its name may imply. R_TLS_NEG
is only used by Solaris R_386_TLS_LE_32.
Rename them so that they will be less confusing.
Reviewed By: grimar, psmith, rprichard
Differential Revision: https://reviews.llvm.org/D93467
`ELFFile<ELFT>` has many methods that take pointers,
though they assume that arguments are never null and
hence could take references instead.
This patch performs such clean-up.
Differential revision: https://reviews.llvm.org/D87385
Symbol information can be used to improve out-of-range/misalignment diagnostics.
It also helps R_ARM_CALL/R_ARM_THM_CALL which has different behaviors with different symbol types.
There are many (67) relocateOne() call sites used in thunks, {Arm,AArch64}errata, PLT, etc.
Rename them to `relocateNoSym()` to be clearer that there is no symbol information.
Reviewed By: grimar, peter.smith
Differential Revision: https://reviews.llvm.org/D73254
This change only affects EM_386. relOff can be computed from `index`
easily, so it is unnecessarily passed as a parameter.
Both in.plt and in.iplt entries are written by writePLT. For in.iplt,
the instruction `push reloc_offset` will change because `index` is now
different. Fortunately, this does not matter because `push; jmp` is only
used by PLT. IPLT does not need the code sequence.
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D71518
Fixes AArch64 part of PR40438
The current range extension thunk framework does not handle a relocation
relative to a STT_SECTION symbol with a non-zero addend, which may be
used by jumps/calls to local functions on some RELA targets (AArch64,
powerpc ELFv1, powerpc64 ELFv2, etc). See PR40438 and the following
code for examples:
// clang -target $target a.cc
// .text.cold may be placed in a separate output section.
// The distance between bar in .text.cold and foo in .text may be larger than 128MiB.
static void foo() {}
__attribute__((section(".text.cold"))) static int bar() { foo(); return
0; }
__attribute__((used)) static int dummy = bar();
This patch makes such thunks with addends work for AArch64. The target
independent part can be reused by PPC in the future.
On REL targets (ARM, MIPS), jumps/calls are not represented as
STT_SECTION + non-zero addend (see
MCELFObjectTargetWriter::needsRelocateWithSymbol), so they don't need
this feature, but we need to make sure this patch does not affect them.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D70637
Summary:
Current versions of clang would erroneously emit this relocation not only
against functions (loaded from the GOT) but also against data symbols
(e.g. a table of function pointers). LLD was then changing this into a
branch-and-link instruction, causing the program to jump to the data
symbol at run time. I discovered this problem when attempting to boot
MIPS64 FreeBSD after updating the to the latest upstream master.
Reviewers: atanasyan, jrtc27, espindola
Reviewed By: atanasyan
Subscribers: emaste, sdardis, krytarowski, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70406
This makes it clear `ELF/**/*.cpp` files define things in the `lld::elf`
namespace and simplifies `elf::foo` to `foo`.
Reviewed By: atanasyan, grimar, ruiu
Differential Revision: https://reviews.llvm.org/D68323
llvm-svn: 373885
This allows us to delete `using namespace llvm::support::endian` and
simplify D68323. This change adds runtime config->endianness check but
the overhead should be negligible.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D68561
llvm-svn: 373884
The R_MIPS_JALR relocation denotes jalr/jr instructions in position
independent code. Both these instructions take a target's address from
the $25 register. If offset to the target symbol fits into the 18-bits,
it's more efficient to replace jalr/jr by bal/b instructions.
Differential Revision: https://reviews.llvm.org/D68057
llvm-svn: 372951
That allows to remove duplicated code which subtracts 0x7000 from the
R_MIPS_TLS_TPREL_XXX relocations values in the `MIPS::relocateOne`
function.
llvm-svn: 366888
This patch is mechanically generated by clang-llvm-rename tool that I wrote
using Clang Refactoring Engine just for creating this patch. You can see the
source code of the tool at https://reviews.llvm.org/D64123. There's no manual
post-processing; you can generate the same patch by re-running the tool against
lld's code base.
Here is the main discussion thread to change the LLVM coding style:
https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html
In the discussion thread, I proposed we use lld as a testbed for variable
naming scheme change, and this patch does that.
I chose to rename variables so that they are in camelCase, just because that
is a minimal change to make variables to start with a lowercase letter.
Note to downstream patch maintainers: if you are maintaining a downstream lld
repo, just rebasing ahead of this commit would cause massive merge conflicts
because this patch essentially changes every line in the lld subdirectory. But
there's a remedy.
clang-llvm-rename tool is a batch tool, so you can rename variables in your
downstream repo with the tool. Given that, here is how to rebase your repo to
a commit after the mass renaming:
1. rebase to the commit just before the mass variable renaming,
2. apply the tool to your downstream repo to mass-rename variables locally, and
3. rebase again to the head.
Most changes made by the tool should be identical for a downstream repo and
for the head, so at the step 3, almost all changes should be merged and
disappear. I'd expect that there would be some lines that you need to merge by
hand, but that shouldn't be too many.
Differential Revision: https://reviews.llvm.org/D64121
llvm-svn: 365595
Summary:
Our rule to create R_*_RELATIVE for absolute relocation types were
loose. D63121 made it stricter but it failed to create R_*_RELATIVE for
R_ARM_TARGET1 and R_PPC64_TOC. rLLD363236 worked around that by
reinstating the original behavior for ARM and PPC64.
This patch is an attempt to simplify the logic.
Note, in ld.bfd, R_ARM_TARGET2 --target2=abs also creates
R_ARM_RELATIVE. This seems a very uncommon scenario (moreover,
--target2=got-rel is the default), so I do not implement any logic
related to it.
Also, delete R_AARCH64_ABS32 from AArch64::getDynRel. We don't have
working ILP32 support yet. Allowing it would create an incorrect
R_AARCH64_RELATIVE.
For MIPS, the (if SymbolRel, then RelativeRel) code is to keep its
behavior unchanged.
Note, in ppc64-abs64-dyn.s, R_PPC64_TOC gets an incorrect addend because
computeAddend() doesn't compute the correct address. We seem to have the
wrong behavior for a long time. The important thing seems that a dynamic
relocation R_PPC64_TOC should not be created as the dynamic loader will
error R_PPC64_TOC is not supported.
Reviewers: atanasyan, grimar, peter.smith, ruiu, sfertile, espindola
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63383
llvm-svn: 363928
The current rule is loose: `!Sym.IsPreemptible || Expr == R_GOT`.
When the symbol is non-preemptable, this allows absolute relocation
types with smaller numbers of bits, e.g. R_X86_64_{8,16,32}. They are
disallowed by ld.bfd and gold, e.g.
ld.bfd: a.o: relocation R_X86_64_8 against `.text' can not be used when making a shared object; recompile with -fPIC
This patch:
a) Add TargetInfo::SymbolicRel to represent relocation types that resolve to a
symbol value (e.g. R_AARCH_ABS64, R_386_32, R_X86_64_64).
As a side benefit, we currently (ab)use GotRel (R_*_GLOB_DAT) to resolve
GOT slots that are link-time constants. Since we now use Target->SymbolRel
to do the job, we can remove R_*_GLOB_DAT from relocateOne() for all targets.
R_*_GLOB_DAT cannot be used as static relocation types.
b) Change the condition to `!Sym.IsPreemptible && Type != Target->SymbolicRel || Expr == R_GOT`.
Some tests are caught by the improved error checking (ld.bfd/gold also
issue errors on them). Many misuse .long where .quad should be used
instead.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63121
llvm-svn: 363059
GotEntrySize and GotPltEntrySize were added in D22288. Later, with
the introduction of wordsize() (then Config->Wordsize), they become
redundant, because there is no target that sets GotEntrySize or
GotPltEntrySize to a number different from Config->Wordsize.
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D62727
llvm-svn: 362220
Use `ld` and `daddiu` instructions in MIPS64 PLT records. That fixes a
segmentation fault.
Patch by Qiao Pengcheng.
Differential Revision: https://reviews.llvm.org/D61586
llvm-svn: 360187
MIPS R6 code uses the `R_MIPS_PC26_S2` relocation for calls which might
cross boundaries of non-PIC-to-PIC code. We need to create a LA25 thunks
for that case.
llvm-svn: 354312
The patch solves two tasks:
1. MIPS ABI allows to mix regular and microMIPS code and perform
cross-mode jumps. Linker needs to detect such cases and replace
jump/branch instructions by their cross-mode equivalents.
2. Other tools like dunamic linkers need to recognize cases when dynamic
table entries, e_entry field of an ELF header etc point to microMIPS
symbol. Linker should provide such information.
The first task is implemented in the `MIPS<ELFT>::relocateOne()` method.
New routine `fixupCrossModeJump` detects ISA mode change, checks and
replaces an instruction.
The main problem is how to recognize that relocation target is microMIPS
symbol. For absolute and section symbols compiler or assembler set the
less-significant bit of the symbol's value or sum of the symbol's value
and addend. And this bit signals to linker about microMIPS code. For
global symbols compiler cannot do the same trick because other tools like,
for example, disassembler wants to know an actual position of the symbol.
So compiler sets STO_MIPS_MICROMIPS flag in the `st_other` field.
In `MIPS<ELFT>::relocateOne()` method we have a symbol's value only and
cannot access any symbol's attributes. To pass type of the symbol
(regular/microMIPS) to that routine as well as other places where we
write a symbol value as-is (.dynamic section, `Elf_Ehdr::e_entry` field
etc) we set when necessary a less-significant bit in the `getSymVA`
function.
Differential revision: https://reviews.llvm.org/D40147
llvm-svn: 354311
Previously, we showed the following message for an unknown relocation:
foo.o: unrecognized reloc 256
This patch improves it so that the error message includes a symbol name:
foo.o: unknown relocation (256) against symbol bar
llvm-svn: 354040
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Current value using as a trap instruction (0xefefefef) is not a good choice
for MIPS because it's a valid MIPS instruction `swc3 $15,-4113(ra)`. This
patch replaces 0xefefefef by 0x04170001. For all MIPS ISA revisions before
R6, this value is just invalid instruction. Starting from MIPS R6 it's
a valid instruction `sigrie 1` which signals a Reserved Instruction exception.
mips-traps.s test case is added to test trap encoding. Other test cases
are modified to remove redundant checking.
Differential revision: https://reviews.llvm.org/D54154
llvm-svn: 347029
The uint32_t type does not clearly convey that these fields are interpreted
in the target endianness. Converting them to byte arrays should make this
more obvious and less error-prone.
Patch by James Clarke
Differential Revision: http://reviews.llvm.org/D54207
llvm-svn: 346893
This is https://bugs.llvm.org//show_bug.cgi?id=38919.
Currently, LLD may report "unsupported relocation target while parsing debug info"
when parsing the debug information.
At the same time LLD does that for zeroed R_X86_64_NONE relocations,
which obviously has "invalid" targets.
The nature of R_*_NONE relocation assumes them should be ignored.
This patch teaches LLD to stop reporting the debug information parsing errors for them.
Differential revision: https://reviews.llvm.org/D52408
llvm-svn: 343078
Previously, if you invoke lld's `main` more than once in the same process,
the second invocation could fail or produce a wrong result due to a stale
pointer values of the previous run.
Differential Revision: https://reviews.llvm.org/D52506
llvm-svn: 343009
Remove support for linking microMIPS 64-bit code because this kind of
ISA is rarely used and unsupported by LLVM.
Differential revision: https://reviews.llvm.org/D48949
llvm-svn: 336413
As was mentioned in comments for D45158,
isPicRel's name does not make much sense,
because what this method does is checks if
we need to create the dynamic relocation or not.
Instead of renaming it to something different,
we can 'isPicRel' completely.
We can reuse the getDynRel method.
They are logically very close, getDynRel can just return
R_*_NONE in case no dynamic relocation should be produced
and that would simplify things and avoid functionality
correlation/duplication with 'isPicRel'.
The patch does this change.
Differential revision: https://reviews.llvm.org/D45248
llvm-svn: 329275
This is the same as 327248 except Arm defining _GLOBAL_OFFSET_TABLE_ to
be the base of the .got section as some existing code is relying upon it.
For most Targets the _GLOBAL_OFFSET_TABLE_ symbol is expected to be at
the start of the .got.plt section so that _GLOBAL_OFFSET_TABLE_[0] =
reserved value that is by convention the address of the dynamic section.
Previously we had defined _GLOBAL_OFFSET_TABLE_ as either the start or end
of the .got section with the intention that the .got.plt section would
follow the .got. However this does not always hold with the current
default section ordering so _GLOBAL_OFFSET_TABLE_[0] may not be consistent
with the reserved first entry of the .got.plt.
X86, X86_64 and AArch64 will use the .got.plt. Arm, Mips and Power use .got
Fixes PR36555
Differential Revision: https://reviews.llvm.org/D44259
llvm-svn: 327823
This change broke ARM code that expects to be able to add
_GLOBAL_OFFSET_TABLE_ to the result of an R_ARM_REL32.
I will provide a reproducer on llvm-commits.
llvm-svn: 327688
the start of the .got.plt section so that _GLOBAL_OFFSET_TABLE_[0] =
reserved value that is by convention the address of the dynamic section.
Previously we had defined _GLOBAL_OFFSET_TABLE_ as either the start or end
of the .got section with the intention that the .got.plt section would
follow the .got. However this does not always hold with the current
default section ordering so _GLOBAL_OFFSET_TABLE_[0] may not be consistent
with the reserved first entry of the .got.plt.
X86, X86_64, Arm and AArch64 will use the .got.plt. Mips and Power use .got
Fixes PR36555
Differential Revision: https://reviews.llvm.org/D44259
llvm-svn: 327248
Address @ruiu's post commit review comment about a value which is intended
to be a unsigned 32 bit integer as using uint32_t rather than unsigned.
llvm-svn: 325713
This patch provides migitation for CVE-2017-5715, Spectre variant two,
which affects the P5600 and P6600. It implements the LLD part of
-z hazardplt. Like the Clang part of this patch, I have opted for that
specific option name in case alternative migitation methods are required
in the future.
The mitigation strategy suggested by MIPS for these processors is to use
hazard barrier instructions. 'jalr.hb' and 'jr.hb' are hazard
barrier variants of the 'jalr' and 'jr' instructions respectively.
These instructions impede the execution of instruction stream until
architecturally defined hazards (changes to the instruction stream,
privileged registers which may affect execution) are cleared. These
instructions in MIPS' designs are not speculated past.
These instructions are defined by the MIPS32R2 ISA, so this mitigation
method is not compatible with processors which implement an earlier
revision of the MIPS ISA.
For LLD, this changes PLT stubs to use 'jalr.hb' and 'jr.hb'.
Reviewers: atanasyan, ruiu
Differential Revision: https://reviews.llvm.org/D43488
llvm-svn: 325647
We need to decompose relocation type for N32 / N64 ABI. Let's do it
before any other manipulations with relocation type in the `relocateOne`
routine.
llvm-svn: 322860
microMIPS symbols including microMIPS PLT records created for regular
symbols needs to be marked by STO_MIPS_MICROMIPS flag in a symbol table.
Additionally microMIPS entries in a dynamic symbol table should have
configured less-significant bit. That allows to escape teaching a
dynamic linker about microMIPS symbols.
llvm-svn: 318097
We have a lot of "if (MIPS)" conditions in lld because the MIPS' ABI
is different at various places than other arch's ABIs at where it
don't have to be different, but we at least want to reduce MIPS-ness
from the regular classes.
llvm-svn: 317525
Now that DefinedRegular is the only remaining derived class of
Defined, we can merge the two classes.
Differential Revision: https://reviews.llvm.org/D39667
llvm-svn: 317448
Fangrui Song