See thread here:
http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140825/012580.html
The original change I made there was due to a segfault. That was
caused by me directly calling PluginManager::Initialize (), with
PluginManager::Initialize() depending on HostInfo::Initialize () to
have been called already (which it wasn't).
The call to PluginManager::Initialize () was erroneous (at least at the
current time) since that method is already called by Debugger::Initialize()'s
implementation.
We will want to revisit initializing a smaller core of the debugger
suitable for lldb-gdbserver and lldb-platform.
llvm-svn: 216581
This patch allows invalid DynamicLibrary instances to be
constructed, and fixes the const-correctness of the isValid()
method.
No functional change.
llvm-svn: 216571
'shl nuw CI, x' produces [CI, CI << CLZ(CI)]
'shl nsw CI, x' produces [CI << CLO(CI)-1, CI] if CI is negative
'shl nsw CI, x' produces [CI, CI << CLZ(CI)-1] if CI is non-negative
llvm-svn: 216570
I copied this originally based on what debugserver was doing. This appears to
be incorrect and unncessary for Linux. The LinuxSignals on the lldb side
don't look for these and therefore they get handled incorrectly.
Leaving the hook in place since I think darwin will continue to need to
translate those signal numbers.
llvm-svn: 216564
In C++11, instantiation of exception specs is deferred. The instantiation is
done in MarkFunctionReferenced(), which wasn't called for non-OdrUsed functions,
which then caused an assert in codegen. Fixes PR19190, see the bug for details.
llvm-svn: 216562
The way the standard currently specifies the default constructor for atomic<T>
requires T to be nothrow default constructible. This patch makes our test types
meet this requirement.
Note: The nothrow default constructible requirment is subject to the outcome of
LWG issue 1265.
llvm-svn: 216561
global pool in the course of method selection for
a messaging expression, select one with the most general
return type of 'id'. This is to remove type-mismatch
warning (which is useless) as result of random selection of
method with more restrictive return type. rdar://18095772
llvm-svn: 216560
ACLE 2.0 allows __fp16 to be used as a function argument or return
type. This enables this for AArch64.
This also fixes an existing bug that causes clang to not allow
homogeneous floating-point aggregates with a base type of __fp16. This
is valid for AAPCS64, but not for AAPCS-VFP.
llvm-svn: 216558
This teaches the AArch64 backend to deal with the operations required
to deal with the operations on v4f16 and v8f16 which are exposed by
NEON intrinsics, plus the add, sub, mul and div operations.
llvm-svn: 216555
Currently the analyzer lazily models some functions using 'BodyFarm',
which constructs a fake function implementation that the analyzer
can simulate that approximates the semantics of the function when
it is called. BodyFarm does this by constructing the AST for
such definitions on-the-fly. One strength of BodyFarm
is that all symbols and types referenced by synthesized function
bodies are contextual adapted to the containing translation unit.
The downside is that these ASTs are hardcoded in Clang's own
source code.
A more scalable model is to allow these models to be defined as source
code in separate "model" files and have the analyzer use those
definitions lazily when a function body is needed. Among other things,
it will allow more customization of the analyzer for specific APIs
and platforms.
This patch provides the initial infrastructure for this feature.
It extends BodyFarm to use an abstract API 'CodeInjector' that can be
used to synthesize function bodies. That 'CodeInjector' is
implemented using a new 'ModelInjector' in libFrontend, which lazily
parses a model file and injects the ASTs into the current translation
unit.
Models are currently found by specifying a 'model-path' as an
analyzer option; if no path is specified the CodeInjector is not
used, thus defaulting to the current behavior in the analyzer.
Models currently contain a single function definition, and can
be found by finding the file <function name>.model. This is an
initial starting point for something more rich, but it bootstraps
this feature for future evolution.
This patch was contributed by Gábor Horváth as part of his
Google Summer of Code project.
Some notes:
- This introduces the notion of a "model file" into
FrontendAction and the Preprocessor. This nomenclature
is specific to the static analyzer, but possibly could be
generalized. Essentially these are sources pulled in
exogenously from the principal translation.
Preprocessor gets a 'InitializeForModelFile' and
'FinalizeForModelFile' which could possibly be hoisted out
of Preprocessor if Preprocessor exposed a new API to
change the PragmaHandlers and some other internal pieces. This
can be revisited.
FrontendAction gets a 'isModelParsingAction()' predicate function
used to allow a new FrontendAction to recycle the Preprocessor
and ASTContext. This name could probably be made something
more general (i.e., not tied to 'model files') at the expense
of losing the intent of why it exists. This can be revisited.
- This is a moderate sized patch; it has gone through some amount of
offline code review. Most of the changes to the non-analyzer
parts are fairly small, and would make little sense without
the analyzer changes.
- Most of the analyzer changes are plumbing, with the interesting
behavior being introduced by ModelInjector.cpp and
ModelConsumer.cpp.
- The new functionality introduced by this change is off-by-default.
It requires an analyzer config option to enable.
llvm-svn: 216550
Add entries to core_definitions and elf_arch_entries for
those variants. Select the subtype for the variant by parsing
the e_flags field of the elf header.
llvm-svn: 216541
we stopped efficiently lowering sextload using the SSE41 instructions
for that operation.
This is a consequence of a bad predicate I used thinking of the memory
access needs. The code actually handles the cases where the predicate
doesn't apply, and handles them much better. =] Simple fix and a test
case added. Fixes PR20767.
llvm-svn: 216538
This combine is essentially combining target-specific nodes back into target
independent nodes that it "knows" will be combined yet again by a target
independent DAG combine into a different set of target-independent nodes that
are legal (not custom though!) and thus "ok". This seems... deeply flawed. The
crux of the problem is that we don't combine un-legalized shuffles that are
introduced by legalizing other operations, and thus we don't see a very
profitable combine opportunity. So the backend just forces the input to that
combine to re-appear.
However, for this to work, the conditions detected to re-form the unlegalized
nodes must be *exactly* right. Previously, failing this would have caused poor
code (if you're lucky) or a crasher when we failed to select instructions.
After r215611 we would fall back into the legalizer. In some cases, this just
"fixed" the crasher by produces bad code. But in the test case added it caused
the legalizer and the dag combiner to iterate forever.
The fix is to make the alignment checking in the x86 side of things match the
alignment checking in the generic DAG combine exactly. This isn't really a
satisfying or principled fix, but it at least make the code work as intended.
It also highlights that it would be nice to detect the availability of under
aligned loads for a given type rather than bailing on this optimization. I've
left a FIXME to document this.
Original commit message for r215611 which covers the rest of the chang:
[SDAG] Fix a case where we would iteratively legalize a node during
combining by replacing it with something else but not re-process the
node afterward to remove it.
In a truly remarkable stroke of bad luck, this would (in the test case
attached) end up getting some other node combined into it without ever
getting re-processed. By adding it back on to the worklist, in addition
to deleting the dead nodes more quickly we also ensure that if it
*stops* being dead for any reason it makes it back through the
legalizer. Without this, the test case will end up failing during
instruction selection due to an and node with a type we don't have an
instruction pattern for.
It took many million runs of the shuffle fuzz tester to find this.
llvm-svn: 216537
This tidies up some ARM-specific code added by r208417 to move it out
of the target-independent parts of clang into TargetInfo.cpp. This
also has the advantage that we can now flatten struct arguments to
variadic AAPCS functions.
llvm-svn: 216535
There is no reason to have different library names for shared and static
cases on linux. It also breaks Android where we install the shared asan-rt
library into the system and should keep the old name.
This change reverts most of r216380 limiting it to win32 targets only.
llvm-svn: 216533
modern Debian-based distributions) due to on-going multiarch madness.
It appears that when the multiarch heeader search support went into the
clang driver, it went in in a quite bad state. The order of includes
completely failed to match the order exhibited by GCC, and in a specific
case -- when the GCC triple and the multiarch triple don't match as with
i686-linux-gnu and i386-linux-gnu -- we would absolutely fail to find
the libstdc++ target-specific header files.
I assume that folks who have been using Clang on Ubuntu 32-bit systems
have been applying weird patches to hack around this. I can't imagine
how else it could have worked. This was originally reported by a 64-bit
operating system user who had a 32-bit crosscompiler installed. We tried
to use that rather than the bi-arch support of the 64-bit compiler, but
failed due to the triple differences.
I've corrected all the wrong orderings in the existing tests and added
a specific test for the multiarch triple strings that are different in
a significant way. This should significantly improve the usability of
Clang when checked out vanilla from upstream onto Ubuntu machines with
an i686 GCC installation for whatever reason.
llvm-svn: 216531
Rafael Espindola