We do not have to spread using the precompiled binaries in the tests,
when we can use YAML. This patch removes the dynrel.elf binary and adds
a few comments to the test cases.
Differential revision: https://reviews.llvm.org/D63641
llvm-svn: 364052
Summary:
The motivation for this was to propagate fast-math flags like nnan and
ninf on vector floating point operations to the corresponding scalar
operations to take advantage of follow-on optimizations. But I think
the same argument applies to all of our IR flags: if they apply to the
vector operation then they also apply to all the individual scalar
operations, and they might enable follow-on optimizations.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63593
llvm-svn: 364051
There are some test that are splitted into main part + input yaml for no visible reason.
This patch inines the yaml part for the 3 test cases I found.
Differential revision: https://reviews.llvm.org/D63644
llvm-svn: 364049
All the compilers we support provide these builtins. We don't
need to do a configuration dance anymore.
This patch also cleans up some dead or almost dead
C++11 feature detection macros.
llvm-svn: 364047
Summary:
LLVM Allows Targets to provide information that guides optimisations
made to LLVM IR. This is done with callbacks on a TargetTransformInfo object.
This patch adds a TargetTransformInfo class for RISC-V. This will allow us to
implement RISC-V specific callbacks as they become necessary.
This commit also adds the getIntImmCost callbacks, and tests them with a simple
constant hoisting test. Our immediate costs are on the conservative side, for
the moment, but we prevent hoisting in most circumstances anyway.
Previous review was on D63007
Reviewers: asb, luismarques
Reviewed By: asb
Subscribers: ributzka, MaskRay, llvm-commits, Jim, benna, psnobl, jocewei, PkmX, rkruppe, the_o, brucehoult, MartinMosbeck, rogfer01, edward-jones, zzheng, jrtc27, shiva0217, kito-cheng, niosHD, sabuasal, apazos, simoncook, johnrusso, rbar, hiraditya, mgorny
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63433
llvm-svn: 364046
This patch teaches the bottleneck analysis how to identify and print the most
expensive sequence of instructions according to the simulation. Fixes PR37494.
The goal is to help users identify the sequence of instruction which is most
critical for performance.
A dependency graph is internally used by the bottleneck analysis to describe
data dependencies and processor resource interferences between instructions.
There is one node in the graph for every instruction in the input assembly
sequence. The number of nodes in the graph is independent from the number of
iterations simulated by the tool. It means that a single node of the graph
represents all the possible instances of a same instruction contributed by the
simulated iterations.
Edges are dynamically "discovered" by the bottleneck analysis by observing
instruction state transitions and "backend pressure increase" events generated
by the Execute stage. Information from the events is used to identify critical
dependencies, and materialize edges in the graph. A dependency edge is uniquely
identified by a pair of node identifiers plus an instance of struct
DependencyEdge::Dependency (which provides more details about the actual
dependency kind).
The bottleneck analysis internally ranks dependency edges based on their impact
on the runtime (see field DependencyEdge::Dependency::Cost). To this end, each
edge of the graph has an associated cost. By default, the cost of an edge is a
function of its latency (in cycles). In practice, the cost of an edge is also a
function of the number of cycles where the dependency has been seen as
'contributing to backend pressure increases'. The idea is that the higher the
cost of an edge, the higher is the impact of the dependency on performance. To
put it in another way, the cost of an edge is a measure of criticality for
performance.
Note how a same edge may be found in multiple iteration of the simulated loop.
The logic that adds new edges to the graph checks if an equivalent dependency
already exists (duplicate edges are not allowed). If an equivalent dependency
edge is found, field DependencyEdge::Frequency of that edge is incremented by
one, and the new cost is cumulatively added to the existing edge cost.
At the end of simulation, costs are propagated to nodes through the edges of the
graph. The goal is to identify a critical sequence from a node of the root-set
(composed by node of the graph with no predecessors) to a 'sink node' with no
successors. Note that the graph is intentionally kept acyclic to minimize the
complexity of the critical sequence computation algorithm (complexity is
currently linear in the number of nodes in the graph).
The critical path is finally computed as a sequence of dependency edges. For
edges describing processor resource interferences, the view also prints a
so-called "interference probability" value (by dividing field
DependencyEdge::Frequency by the total number of iterations).
Examples of critical sequence computations can be found in tests added/modified
by this patch.
On output streams that support colored output, instructions from the critical
sequence are rendered with a different color.
Strictly speaking the analysis conducted by the bottleneck analysis view is not
a critical path analysis. The cost of an edge doesn't only depend on the
dependency latency. More importantly, the cost of a same edge may be computed
differently by different iterations.
The number of dependencies is discovered dynamically based on the events
generated by the simulator. However, their number is not fixed. This is
especially true for edges that model processor resource interferences; an
interference may not occur in every iteration. For that reason, it makes sense
to also print out a "probability of interference".
By construction, the accuracy of this analysis (as always) is strongly dependent
on the simulation (and therefore the quality of the information available in the
scheduling model).
That being said, the critical sequence effectively identifies a performance
criticality. Instructions from that sequence are expected to have a very big
impact on performance. So, users can take advantage of this information to focus
their attention on specific interactions between instructions.
In my experience, it works quite well in practice, and produces useful
output (in a reasonable amount time).
Differential Revision: https://reviews.llvm.org/D63543
llvm-svn: 364045
Summary:
This resolves the issue of introducing c++-style includes for C files.
- refactor the gen_std.py, make it reusable for parsing C symbols.
- add a language mode to the mapping method to use different mapping for
C and C++ files.
Reviewers: kadircet
Subscribers: ilya-biryukov, MaskRay, jkorous, arphaman, jfb, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D63270
llvm-svn: 364044
Introduce two common helpers to take care of splitting and recombining
YMM registers to/from XSAVE-like data. Since FreeBSD, Linux and NetBSD
all use XSAVE-like data structures but with potentially different field
layouts, the function takes two pointers -- to XMM register and to YMM
high bits, and copies the data from/to YMMReg type.
While at it, remove support for big endian. To mine and Pavel Labath's
combined knowledge, there is no such thing on x86. Furthermore,
assuming that the YMM register data would be swapped for big endian
seems to be a weird assumption.
Differential Revision: https://reviews.llvm.org/D63610
llvm-svn: 364042
These instructions let you load half a vector register at once from
two general-purpose registers, or vice versa.
The assembly syntax for these instructions mentions the vector
register name twice. For the move _into_ a vector register, the MC
operand list also has to mention the register name twice (once as the
output, and once as an input to represent where the unchanged half of
the output register comes from). So we can conveniently assign one of
the two asm operands to be the output $Qd, and the other $QdSrc, which
avoids confusing the auto-generated AsmMatcher too much. For the move
_from_ a vector register, there's no way to get round the fact that
both instances of that register name have to be inputs, so we need a
custom AsmMatchConverter to avoid generating two separate output MC
operands. (And even that wouldn't have worked if it hadn't been for
D60695.)
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62679
llvm-svn: 364041
This adds the `MVE_qDest_rSrc` superclass and all its instances, plus
a few other instructions that also take a scalar input register or two.
I've also belatedly added custom diagnostic messages to the operand
classes for odd- and even-numbered GPRs, which required matching
changes in two of the existing MVE assembly test files.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62678
llvm-svn: 364040
llvm-mc or clang with -g normally produces debug info describing the
assembler source itself; however, if that source already contains some
.file/.loc directives, we should instead emit the debug info described
by those directives. For certain assembler sources seen in the wild
(particularly in the Chrome build) this was causing a crash due to
incorrect assumptions about legal sequences of assembler source text.
Fixes PR38994.
Differential Revision: https://reviews.llvm.org/D63573
llvm-svn: 364039
The sat add/sub tests still have unnecessary extract_subvector((vandnps ymm, ymm), 0) uses that should be split to (vandnps (extract_subvector(ymm, 0), extract_subvector(ymm, 0)), but its getting better.
llvm-svn: 364038
Summary:
This adds the `MVE_qDest_qSrc` superclass and all instructions that
inherit from it. It's not the complete class of _everything_ with a
q-register as both destination and source; it's a subset of them that
all have similar encodings (but it would have been hopelessly unwieldy
to call it anything like MVE_111x11100).
This category includes add/sub with carry; long multiplies; halving
multiplies; multiply and accumulate, and some more complex
instructions.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62677
llvm-svn: 364037
Many LLVM-based tools already support response files (i.e. files
containing a list of options, specified with '@'). This change simply
updates the documentation and help text for some of these tools to
include it. I haven't attempted to fix all tools, just a selection that
I am interested in.
I've taken the opportunity to add some tests for --help behaviour, where
they were missing. We could expand these tests, but I don't think that's
within scope of this patch.
This fixes https://bugs.llvm.org/show_bug.cgi?id=42233 and
https://bugs.llvm.org/show_bug.cgi?id=42236.
Reviewed by: grimar, MaskRay, jkorous
Differential Revision: https://reviews.llvm.org/D63597
llvm-svn: 364036
--help and -h are automatically supported by the command-line parser,
unless overridden by the tool. The behaviour of the PrintHelpMessage
being used for -h prior to this patch is subtly different to that
provided by --help automatically (it omits certain elements of help text
and options, such as --help-list), so overriding the default is not
desirable, without good reason. This patch removes the explicit
specification of -h and its behaviour, so that the default behaviour is
used.
Reviewed by: hintonda
Differential Revision: https://reviews.llvm.org/D63565
llvm-svn: 364029
Summary:
These take a pair of vector register to compare, and a comparison type
(written in the form of an Arm condition suffix); they output a vector
of booleans in the VPR register, where predication can conveniently
use them.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62676
llvm-svn: 364027
Commit r363496 ("[Clang] Harmonize Split DWARF options with llc",
2019-06-15) introduced the use of llvm-dwarfdump in the clang tests,
so ensure the clang tests are dependent on llvm-dwarfdump.
llvm-svn: 364021
The llvm-objdump document was missing many options, and there were also
some style issues with it. This patches fixes all but the first issue
listed in https://bugs.llvm.org/show_bug.cgi?id=42249 by:
1. Adding missing options and commands.
2. Standardising on double dashes for long-options throughout.
3. Moving Mach-O specific options to a separate section.
4. Removing options that don't exist or aren't relevant to
llvm-objdump.
Reviewed by: MaskRay, mtrent, alexshap
Differential Revision: https://reviews.llvm.org/D63606
llvm-svn: 364019
Summary:
The GCC RISC-V toolchain accepts `-msave-restore` and `-mno-save-restore`
to control whether libcalls are used for saving and restoring the stack within
prologues and epilogues.
Clang currently errors if someone passes -msave-restore or -mno-save-restore.
This means that people need to change build configurations to use clang. This
patch adds these flags, so that clang invocations can now match gcc.
As the RISC-V backend does not currently have a `save-restore` target feature,
we emit a warning if someone requests `-msave-restore`. LLVM does not error if
we pass the (unimplemented) target features `+save-restore` or `-save-restore`.
Reviewers: asb, luismarques
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D63498
llvm-svn: 364018
Summary:
The type timespec is unconditionally used in __threading_support.
Since the C library is only required to provide it in C11, this might
cause problems for platforms with external thread porting layer (i.e.
when _LIBCPP_HAS_THREAD_API_EXTERNAL is defined) with pre-C11
C libraries.
In our downstream port of libc++ we used to provide a definition of
timespec in __external_threading, but this solution is not ideal
because timespec is not a reserved name.
This patch renames timespec into __libcpp_timespec_t in the
thread-related parts of libc++. For all cases except external
threading this type is an alias for ::timespec (and no functional
changes are intended).
In case of external threading it is expected that the
__external_threading header will either provide a similar typedef (if
timespec is available in the vendor's C library) or provide a
definition of __libcpp_timespec_t compatible with POSIX timespec.
Reviewers: ldionne, mclow.lists, EricWF
Reviewed By: ldionne
Subscribers: dexonsmith, libcxx-commits, christof, carwil
Tags: #libc
Differential Revision: https://reviews.llvm.org/D63328
llvm-svn: 364012
Summary:
this patch has multiple small improvements related to the APValue in ConstantExpr.
changes:
- APValue in ConstantExpr are now cleaned up using ASTContext::addDestruction instead of there own system.
- ConstantExprBits Stores the ValueKind of the result beaing stored.
- VerifyIntegerConstantExpression now stores the evaluated value in ConstantExpr.
- the Constant Evaluator uses the stored value of ConstantExpr when available.
Reviewers: rsmith
Reviewed By: rsmith
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D63376
llvm-svn: 364011
Summary:
When dwo support was introduced, it used a trick where debug info
entries were referenced by the offset of the compile unit in the main
file, but the die offset was relative to the dwo file. Although there
was some elegance to it, this representation was starting to reach its
breaking point:
- the fact that the skeleton compile unit owned the DWO file meant that
it was impossible (or at least hard and unintuitive) to support DWO
files containing more than one compile unit. These kinds of files are
produced by LTO for example.
- it made it impossible to reference any DIEs in the skeleton compile
unit (although the skeleton units are generally empty, clang still
puts some info into them with -fsplit-dwarf-inlining).
- (current motivation) it made it very hard to support type units placed
in DWO files, as type units don't have any skeleton units which could
be referenced in the main file
This patch addresses this problem by introducing an new
"dwo_num" field to the DIERef class, whose purpose is to identify the
dwo file. It's kind of similar to the dwo_id field in DWARF5 unit
headers, but while this is a 64bit hash whose main purpose is to catch
file mismatches, this is just a smaller integer used to indentify a
loaded dwo file. Currently, this is based on the index of the skeleton
compile unit which owns the dwo file, but it is intended to be
eventually independent of that (to support the LTO use case).
Simultaneously the cu_offset is dropped to conserve space, as it is no
longer necessary. This means we can remove the "BaseObjectOffset" field
from the DWARFUnit class. It also means we can remove some of the
workarounds put in place to support the skeleton-unit+dwo-die combo.
More work is needed to remove all of them, which is out of scope of this
patch.
Reviewers: JDevlieghere, clayborg, aprantl
Subscribers: mehdi_amini, dexonsmith, arphaman, lldb-commits
Differential Revision: https://reviews.llvm.org/D63428
llvm-svn: 364009
Update the llvm::enumerate helper class result_pair<R> to use the 'iterator_traits<R>::reference'
type as the result of 'value()' instead 'ValueOfRange<R> &'. This enables support for iterators
that return value types, i.e. non reference. This is a common pattern for some classes of
iterators, e.g. mapped_iterator.
Patch by: River Riddle <riverriddle@google.com>
Differential Revision: https://reviews.llvm.org/D63632
llvm-svn: 364007
Eric Fiselier