a generically extensible collection of extra info attached to
a `MachineInstr`.
The primary change here is cleaning up the APIs used for setting and
manipulating the `MachineMemOperand` pointer arrays so chat we can
change how they are allocated.
Then we introduce an extra info object that using the trailing object
pattern to attach some number of MMOs but also other extra info. The
design of this is specifically so that this extra info has a fixed
necessary cost (the header tracking what extra info is included) and
everything else can be tail allocated. This pattern works especially
well with a `BumpPtrAllocator` which we use here.
I've also added the basic scaffolding for putting interesting pointers
into this, namely pre- and post-instruction symbols. These aren't used
anywhere yet, they're just there to ensure I've actually gotten the data
structure types correct. I'll flesh out support for these in
a subsequent patch (MIR dumping, parsing, the works).
Finally, I've included an optimization where we store any single pointer
inline in the `MachineInstr` to avoid the allocation overhead. This is
expected to be the overwhelmingly most common case and so should avoid
any memory usage growth due to slightly less clever / dense allocation
when dealing with >1 MMO. This did require several ergonomic
improvements to the `PointerSumType` to reasonably support the various
usage models.
This also has a side effect of freeing up 8 bits within the
`MachineInstr` which could be repurposed for something else.
The suggested direction here came largely from Hal Finkel. I hope it was
worth it. ;] It does hopefully clear a path for subsequent extensions
w/o nearly as much leg work. Lots of thanks to Reid and Justin for
careful reviews and ideas about how to do all of this.
Differential Revision: https://reviews.llvm.org/D50701
llvm-svn: 339940
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
There are cases when individual NodeSets can be equal with respect to
the ordering criteria. Since they are stored in an ordered container,
use stable_sort to preserve the relative order of equal NodeSets.
This should remove non-determinism discovered by shuffling done in
llvm::sort with expensive checks enabled.
llvm-svn: 329915
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: bogner, rnk, MatzeB, RKSimon
Reviewed By: rnk
Subscribers: JDevlieghere, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D45133
llvm-svn: 329435
First, we change the heuristic that is used to ignore the recurrent
node-sets in the node ordering. In certain cases it's not important
to focus on the recurrent node-sets. Instead, the algorithm begins
by considering all the instructions in the node ordering step.
Second, a minor change to the bottom up traversal, which needs to
consider loop carried dependences (modeled as anti dependences).
Previously, these instructions were skipped, which caused problems
because the instruction ends up having both predecessors and
sucessors in the schedule.
Third, consider anti-dependences as a tie breaker when choosing
between instructions in the node ordering. We want to make sure
that the source of the anti-dependence does not end up with both
predecesssors and sucessors in the final node ordering.
Patch by Brendon Cahoon.
llvm-svn: 328554
The pipeliner must add a loop carried dependence between two memory
operations if the base register is not an affine (linear) exression.
The current implementation doesn't check how the base register is
defined, which allows non-affine expressions, and then the pipeliner
does not add a loop carried dependence when one is needed.
This patch adds code to isLoopCarriedOrder that checks if the base
register of the memory operations is defined by a phi, and the loop
definition for the phi is a constant increment value. This is a very
simple check for a linear expression.
Patch by Brendon Cahoon.
llvm-svn: 328550
The pipeliner is not adding a dependence edge for a loop carried
dependence, and ends up scheduling a load from iteration n prior
to an aliased store in iteration n-1.
The code that adds the loop carried dependences in the pipeliner
doesn't check if the memory objects for loads and stores are
"identified" (i.e., distinct) objects. If they are not, then the
code that adds the dependences needs to be conservative. The
objects can be used to check dependences only when they are
distinct objects.
The code that checks for loop carried dependences has been updated
to classify loads and stores that are not identified as "unknown"
values. A store with an "unknown" value can potentially create
a loop carried dependence with any pending load.
Patch by Brendon Cahoon.
llvm-svn: 328547
The phi renaming code in the pipeliner uses the wrong value when
rewriting phi uses, which results in an undefined value. In this
case, the original phi is no longer needed due to the order of
instruction in the pipelined loop. The pipeliner was assuming, in
this case, the the phi loop definition should be used to
rewrite the uses. However, the pipeliner needs to check to make
sure that the loop definition has already been scheduled. If not,
then the phi initial value needs to be used instead.
Patch by Brendon Cahoon.
llvm-svn: 328545
The pipeliner was generating too many phis in the epilog blocks, which
caused incorrect code generation when rewriting an instruction that uses
the phi.
In this case, there 3 prolog and epilog stages. An existing phi was
scheduled at stage 1. When generating the code for the 2nd epilog an
extra new phi was generated.
To fix this, we need to update the code that calculates the maximum
number of phis that can be generated, which is based upon the current
prolog stage and the stage of the original phi. In this case, when the
prolog stage is 1 and the original phi stage is 1, the maximum number
of phis to generate is 2.
Patch by Brendon Cahoon.
llvm-svn: 328543
The patch contains severals changes needed to pipeline an example
that was transformed so that a Phi with a subreg is converted to
copies.
The pipeliner wasn't working for a couple of reasons.
- The RecMII was 3 instead of 2 due to the extra copies.
- Copy instructions contained a latency of 1.
- The node order algorithm was not choosing the best "bottom"
node, which caused an instruction to be scheduled that had a
predecessor and successor already scheduled.
- Updated the Hexagon Machine Scheduler to check if the node is
latency bound when adding the cost for a 0-latency dependence.
The RecMII was 3 because the computation looks at the number of
nodes in the recurrence. The extra copy is an extra node but
it shouldn't increase the latency. The new RecMII computation
looks at the latency of the instructions in the recurrence. We
changed the latency of the dependence of a copy to 0. The latency
computation for the copy also checks the use of the copy (similar
to a reg_sequence).
The node order algorithm was not choosing the last instruction
in the recurrence for a bottom up traversal. This was when the
last instruction is a copy. A check was added when choosing the
instruction to check for NodeNum if the maxASAP is the same. This
means that the scheduler will not end up with another node in
the recurrence that has both a predecessor and successor already
scheduled.
The cost computation in Hexagon Machine Scheduler adds cost when
an instruction can be packetized with a zero-latency instruction.
We should only do this if the schedule is latency bound.
Patch by Brendon Cahoon.
llvm-svn: 328542
The pipeliner is asserting because the serialization step that
occurs at the end is deleting an instruction. The assert
occurs later on because there is a use without a definition.
The problem occurs when an instruction defines a value used
by a REQ_SEQUENCE and that value is used by a COPY instruction.
The latencies between these instructions are zero, so they are
put in to the same packet. The serialization code is unable to
handle this correctly, and ends up putting the REG_SEQUENCE
before its definition.
There is special code in the serialization step that attempts
to handle zero-cost instructions (phis, copy, reg_sequence)
differently than regular instructions. Unfortunately, this means
the order does not come out correct.
This patch simplifies the code by changing the seperate steps for
handling zero-cost and regular instructions. Only phis are
handled separate now, since they should occurs first. Then, this
patch adds checks to make use the MoveUse is set to the smallest
value if there are multiple uses in a cycle.
Patch by Brendon Cahoon.
llvm-svn: 328540
The pipeliner changes dependences between base+offset instructions
(loads and stores) so that the instructions have more flexibility
to be scheduled with respect to each other. This occurs when the
pipeliner is able to compute that the instructions will not alias
if their order is changed. The prevous code enforced the alias
property by checking if the base register is the same, and that the
offset values are either both positive or negative.
This patch improves the alias check by using the API
areMemAccessesTriviallyDisjoint instead. This enables more cases,
especially if the offset is a negative value. The pipeliner uses
the function by creating a new instruction with the offset used
in the next iteration.
Patch by Brendon Cahoon.
llvm-svn: 328538
A schedule may require that a phi from the original loop is used in
multiple iterations in the scheduled loop. When this occurs, we generate
multiple phis in the pipelined loop to save the value across iterations.
When we generate the new phis and update the register names in the
pipelined loop, the pipeliner attempts to reuse a previously generated
phi, when possible. The calculation for the name of the new phi needs
to account for the version/iteration of the original phi. Also, in the
epilog, the code only needs to check backwards for a previous iteration
until reaching the first prolog block.
Patch by Brendon Cahoon.
llvm-svn: 328537
The code in orderDepdences that looks at the order dependences between
instructions was processing all the successor and predecessor order
dependences. However, we really only want to check for an order dependence
for instructions scheduled in the same cycle.
Also, fixed how the pipeliner handles output dependences. An output
dependence is also a potential loop carried dependence. The pipeliner
didn't handle this case properly so an invalid schedule could be created
that allowed an output dependence to be scheduled in the next iteration
at the same cycle.
Patch by Brendon Cahoon.
llvm-svn: 328516
When the definition of a phi is used by a phi in the next iteration,
the pipeliner was assuming that the definition is processed first.
Because of the assumption, an incorrect phi name was used. This patch
has a check to see if the phi definition has been processed already.
Patch by Brendon Cahoon.
llvm-svn: 328510
The software pipeliner attempts to delete dead instructions after
generating the pipelined loop. The code looks for uses of each
instruction. Physical registers should be treated differently because
the use chains do not exist. The code that checks for dead
instructions should assume that definitions of physical registers
are used if the operand doesn't contain the dead flag.
Patch by Brendon Cahoon.
llvm-svn: 328509
The pipeliner needs to be conservative when updating the memoperands
of instructions in the epilog. Previously, the pipeliner was changing
the offset of the memoperand based upon the scheduling stage. However,
that is incorrect when control flow branches around the kernel code.
The bug enabled a load and store to the same stack offset to be swapped.
This patch fixes the bug by updating the size of the memoperands to be
UINT_MAX. This conservative value means that dependences will be created
between other loads and stores.
Patch by Brendon Cahoon.
llvm-svn: 328508
The pipeliner needs to remove instructions from the SlotIndexes
structure when they are deleted. Otherwise, the SlotIndexes map
has stale data, and an assert will occur when adding new
instructions.
This patch also changes the pipeliner to make the back-edge of
a loop carried dependence 1 cycle. The 1 cycle latency is added
to the anti-dependence that represents the back-edge. This
changes eliminates a couple of hacks added to the pipeliner to
handle the latency of the back-edge. It is needed to correctly
pipeline the test case for the sub-register elimination pass.
llvm-svn: 328113
Summary:
A desired property of the node order in Swing Modulo Scheduling is
that for nodes outside circuits the following holds: none of them is
scheduled after both a successor and a predecessor. We call
node orders that meet this property valid.
Although invalid node orders do not lead to the generation of incorrect
code, they can cause the pipeliner not being able to find a pipelined schedule
for arbitrary II. The reason is that after scheduling the successor and the
predecessor of a node, no room may be left to schedule the node itself.
For data flow graphs with 0-latency edges, the node ordering algorithm
of Swing Modulo Scheduling can generate such undesired invalid node orders.
This patch fixes that.
In the remainder of this commit message, I will give an example
demonstrating the issue, explain the fix, and explain how the the fix is tested.
Consider, as an example, the following data flow graph with all
edge latencies 0 and all edges pointing downward.
```
n0
/ \
n1 n3
\ /
n2
|
n4
```
Consider the implemented node order algorithm in top-down mode. In that mode,
the algorithm orders the nodes based on greatest Height and in case of equal
Height on lowest Movability. Finally, in case of equal Height and
Movability, given two nodes with an edge between them, the algorithm prefers
the source-node.
In the graph, for every node, the Height and Movability are equal to 0.
As will be explained below, the algorithm can generate the order n0, n1, n2, n3, n4.
So, node n3 is scheduled after its predecessor n0 and after its successor n2.
The reason that the algorithm can put node n2 in the order before node n3,
even though they have an edge between them in which node n3 is the source,
is the following: Suppose the algorithm has constructed the partial node
order n0, n1. Then, the nodes left to be ordered are nodes n2, n3, and n4. Suppose
that the while-loop in the implemented algorithm considers the nodes in
the order n4, n3, n2. The algorithm will start with node n4, and look for
more preferable nodes. First, node n4 will be compared with node n3. As the nodes
have equal Height and Movability and have no edge between them, the algorithm
will stick with node n4. Then node n4 is compared with node n2. Again the
Height and Movability are equal. But, this time, there is an edge between
the two nodes, and the algorithm will prefer the source node n2.
As there are no nodes left to compare, the algorithm will add node n2 to
the node order, yielding the partial node order n0, n1, n2. In this way node n2
arrives in the node-order before node n3.
To solve this, this patch introduces the ZeroLatencyHeight (ZLH) property
for nodes. It is defined as the maximum unweighted length of a path from the
given node to an arbitrary node in which each edge has latency 0.
So, ZLH(n0)=3, ZLH(n1)=ZLH(n3)=2, ZLH(n2)=1, and ZLH(n4)=0
In this patch, the preference for a greater ZeroLatencyHeight
is added in the top-down mode of the node ordering algorithm, after the
preference for a greater Height, and before the preference for a
lower Movability.
Therefore, the two allowed node-orders are n0, n1, n3, n2, n4 and n0, n3, n1, n2, n4.
Both of them are valid node orders.
In the same way, the bottom-up mode of the node ordering algorithm is adapted
by introducing the ZeroLatencyDepth property for nodes.
The patch is tested by adding extra checks to the following existing
lit-tests:
test/CodeGen/Hexagon/SUnit-boundary-prob.ll
test/CodeGen/Hexagon/frame-offset-overflow.ll
test/CodeGen/Hexagon/vect/vect-shuffle.ll
Before this patch, the pipeliner failed to pipeline the loops in these tests
due to invalid node-orders. After the patch, the pipeliner successfully
pipelines all these loops.
Reviewers: bcahoon
Reviewed By: bcahoon
Subscribers: Ayal, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D43620
llvm-svn: 326925
Absence of memory operands is treated as "aliasing everything", so
dropping them is sufficient.
Recommit r326256 with a fixed testcase.
llvm-svn: 326262
Add iterator ranges for machine instruction phis, similar to the IR-level
phi ranges added in r303964. I updated a few places to use this. Besides
general code simplification, this change will allow removing a non-upstream
change from Swift's copy of LLVM (in a better way than my previous attempt
in http://reviews.llvm.org/D19080).
https://reviews.llvm.org/D41672
llvm-svn: 321783
Headers/Implementation files should be named after the class they
declare/define.
Also eliminated an `#include "llvm/CodeGen/LiveIntervalAnalysis.h"` in
favor of `class LiveIntarvals;`
llvm-svn: 320546
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
llvm-svn: 317647
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
The software pipeliner and the packetizer try to break dependence
between the post-increment instruction and the dependent memory
instructions by changing the base register and the offset value.
However, in some cases, the existing logic didn't work properly
and created incorrect offset value.
Patch by Jyotsna Verma.
llvm-svn: 315468
The pipeliner is generating a serial sequence that causes poor
register allocation when a post-increment instruction appears
prior to the use of the post-increment register. This occurs when
there is a circular set of dependences involved with a sequence
of instructions in the same cycle. In this case, there is no
serialization of the parallel semantics that will not cause an
additional register to be allocated.
This patch fixes the problem by changing the instructions so that
the post-increment instruction is used by the subsequent
instruction, which enables the register allocator to make a
better decision and not require another register.
Patch by Brendon Cahoon.
llvm-svn: 315466
Summary:
Since r293359, most dump() function are only defined when
`!defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)` holds. print() functions
only used by dump() functions are now unused in release builds,
generating lots of warnings. This patch only defines some print()
functions if they are used.
Reviewers: MatzeB
Reviewed By: MatzeB
Subscribers: arsenm, mzolotukhin, nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D35949
llvm-svn: 309553
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
Rename the DEBUG_TYPE to match the names of corresponding passes where
it makes sense. Also establish the pattern of simply referencing
DEBUG_TYPE instead of repeating the passname where possible.
llvm-svn: 303921
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
llvm-svn: 298393
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
When the pipeliner is renaming phi values, it may need to iterate through
the phi operands to check for other phis. However, the pipeliner should
stop once it reaches a phi that is outside the pipelined loop.
Also, when the generateExistingPhis code is unable to reuse an existing
phi, the default code that computes the PhiOp2 is only to be used when
the pipeliner is generating the kernel. Otherwise, the phi may be a value
computed earlier in the same epilog.
Patch by Brendon Cahoon.
llvm-svn: 290355
Chandler Carruth