and diretory.
Also cleans up all the associated naming to be consistent and removes
the public access to the pass ID which was unused in LLVM.
Also runs clang-format over parts that changed, which generally cleans
up a bunch of formatting.
This is in preparation for doing some internal cleanups to the pass.
Differential Revision: https://reviews.llvm.org/D47352
llvm-svn: 336028
We have a function which switches on the type of a symbol record
to return a hardcoded offset into the record that contains the
symbol name. Not all symbols have names to begin with, and for
those records we return -1 for the offset.
Names are used for various things. Importantly for this particular
bug, a hash of the record name is used as a key for certain hash
tables which are serialied into the PDB file. One of these hash
tables is for the global symbol stream, which is basically a
collection of S_PROCREF symbols which contain the name of the
symbol, a module, and an address offset.
However, for S_PROCREF symbols, the function to return the offset
of the name was returning -1: basically it wasn't implemented.
As a result of this, all global symbols were hashing to the same
value, essentially it was as if every single global symbol's name
was the empty string.
This manifests in the VS debugger when you try to call a function
(global or member, doesn't matter) through the immediate window
and the debugger simply reports an error because it can't find the
function. This makes perfect sense, because it is hashing the name
for real, looking in the global symbol hash table, and there is only
1 entry there which corresponds to a symbol whose name is the empty
string.
Fixing this fixes the MSVC debugger in this case.
llvm-svn: 336024
Summary:
After rL335727, (sdiv X, 1) is treated as a special case, so we can
safely transform 'sdiv's in non-splat pow vectors into 'shr's even when
some of its entries are '1'. The test expectations have been already
fixed in rL335771, but the comments were out of date.
Also changed the filename from `vector_sdiv.ll` to `vector-sdiv.ll` to
be consistent with other test file names.
Reviewers: RKSimon
Subscribers: dschuff, sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D48692
llvm-svn: 336018
Summary:
MemoryPhis now have APIs analogous to BB Phis to remove an incoming value/block.
The MemorySSAUpdater uses the above APIs when updating MemorySSA given a set of dead blocks about to be deleted.
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D48396
llvm-svn: 336015
Summary:
Retagging allocas before returning from the function might help
detecting use after return bugs, but it does not work at all in real
life, when instrumented and non-instrumented code is intermixed.
Consider the following code:
F_non_instrumented() {
T x;
F1_instrumented(&x);
...
}
{
F_instrumented();
F_non_instrumented();
}
- F_instrumented call leaves the stack below the current sp tagged
randomly for UAR detection
- F_non_instrumented allocates its own vars on that tagged stack,
not generating any tags, that is the address of x has tag 0, but the
shadow memory still contains tags left behind by F_instrumented on the
previous step
- F1_instrumented verifies &x before using it and traps on tag mismatch,
0 vs whatever tag was set by F_instrumented
Reviewers: eugenis
Subscribers: srhines, llvm-commits
Differential Revision: https://reviews.llvm.org/D48664
llvm-svn: 336011
When instructions with metadata are accidentally leaked, the result is a
difficult-to-find memory corruption in ~LLVMContextImpl that leads to
random crashes.
Patch by Arvīds Kokins!
llvm-svn: 336010
This was introducing unnecessary padding after the explicit
arguments, depending on the alignment of the total struct type.
Also has the side effect of avoiding creating an extra GEP for
the offset from the base kernel argument to the explicit kernel
argument offset.
llvm-svn: 335999
The important part is the creation of the SHLD/SHRD nodes. The compare and the conditional move can use target independent nodes that can be legalized on their own. This gives some opportunities to trigger the optimizations present in the lowering for those things. And its just better to limit the number of places we emit target specific nodes.
The changed test cases still aren't optimal.
Differential Revision: https://reviews.llvm.org/D48619
llvm-svn: 335998
Extends the CFGPrinter and CallPrinter with heat colors based on heuristics or
profiling information. The colors are enabled by default and can be toggled
on/off for CFGPrinter by using the option -cfg-heat-colors for both
-dot-cfg[-only] and -view-cfg[-only]. Similarly, the colors can be toggled
on/off for CallPrinter by using the option -callgraph-heat-colors for both
-dot-callgraph and -view-callgraph.
Patch by Rodrigo Caetano Rocha!
Differential Revision: https://reviews.llvm.org/D40425
llvm-svn: 335996
Previously we used a DenseMap which is costly to set up due to multiple full table rehashes as the size increases and causes the table to be reallocated.
This patch changes the table to a vector of structs. We now walk the reg->mem tables and push new entries in the mem->reg table for each row not marked TB_NO_REVERSE. Once all the table entries have been created, we sort the vector. Then we can use a binary search for lookups.
Differential Revision: https://reviews.llvm.org/D48585
llvm-svn: 335994
The original binary holder has an optimization where it caches a static
library (archive) between consecutive calls to GetObjects. However, the
actual memory buffer wasn't cached between calls.
This made sense when dsymutil was processing objects one after each
other, but when processing them in parallel, several binaries have to be
in memory at the same time. For this reason, every link context
contained a binary holder.
Having one binary holder per context is problematic, because the same
static archive was cached for every object file. Luckily, when the file
is mmap'ed, this was only costing us virtual memory.
This patch introduces a new BinaryHolder variant that is fully cached,
for all the object files it load, as well as the static archives. This
way, we don't have to give up on this optimization of bypassing the
file system.
Differential revision: https://reviews.llvm.org/D48501
llvm-svn: 335990
This allows to hoist code portion to compute reciprocal of loop
invariant denominator in integer division after codegen prepare
expansion.
Differential Revision: https://reviews.llvm.org/D48604
llvm-svn: 335988
This is a recommit of r335887, which was erroneously committed earlier.
To enable the MachineOutliner by default on AArch64, we need to be able to
disable the MachineOutliner and also provide an option to "always" enable the
outliner.
This adds that capability. It allows the user to still use the old
-enable-machine-outliner option, which defaults to "always". This is building
up to allowing the user to specify "always" versus the target default
outlining behaviour.
https://reviews.llvm.org/D48682
llvm-svn: 335986
This simplifies the logic that updates RAW dependencies in the DispatchStage.
There is no advantage in storing that flag in the ReadDescriptor; we should
simply rely on the call to `STI.getReadAdvanceCycles()` to obtain the
ReadAdvance cycles. If there are no read-advance entries, then method
`getReadAdvanceCycles()` quickly returns 0.
No functional change intended.
llvm-svn: 335977
Summary:
.debug_loc section is not supported for NVPTX target. If there is an
object whose location can change during its lifetime, we do not generate
debug location info for this variable.
Reviewers: echristo
Subscribers: jholewinski, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D48730
llvm-svn: 335976
This was discussed in D48401 as another improvement for:
https://bugs.llvm.org/show_bug.cgi?id=37806
If we have 2 different variable values, then we shuffle (select) those lanes,
shuffle (select) the constants, and then perform the binop. This eliminates a binop.
The new shuffle uses the same shuffle mask as the existing shuffle, so there's no
danger of creating a difficult shuffle.
All of the earlier constraints still apply, but we also check for extra uses to
avoid creating more instructions than we'll remove.
Additionally, we're disallowing the fold for div/rem because that could expose a
UB hole.
Differential Revision: https://reviews.llvm.org/D48678
llvm-svn: 335974
We can have AddRec with loops having many predecessors.
This changes an assert to an early return.
Differential Revision: https://reviews.llvm.org/D48766
llvm-svn: 335965
The test is about what can be run on the host, not the cmake target.
When cross-compiling (compiler-rt at least) on Windows, we end up with
lit being unable to run llvm-lit because it can't find the llvm-lit
module.
llvm-svn: 335961
This uses the same technique as for shifts - split the rotation into 4/2/1-bit partial rotations and select those partials based on the amount bit, making use of PBLENDVB if available. This halves the use of PBLENDVB compared to expanding to shifts, which can be a slow op.
Unfortunately I haven't found a decent way to share much of this code with the shift equivalent.
Differential Revision: https://reviews.llvm.org/D48655
llvm-svn: 335957
Initial patch adding assembly support for Armv8.4-A.
Besides adding v8.4 as a supported architecture to the usual places, this also
adds target features for the different crypto algorithms. Armv8.4-A introduced
new crypto algorithms, made them optional, and allows different combinations:
- none of the v8.4 crypto functions are supported, which is independent of the
implementation of the Armv8.0 SHA1 and SHA2 instructions.
- the v8.4 SHA512 and SHA3 support is implemented, in this case the Armv8.0
SHA1 and SHA2 instructions must also be implemented.
- the v8.4 SM3 and SM4 support is implemented, which is independent of the
implementation of the Armv8.0 SHA1 and SHA2 instructions.
- all of the v8.4 crypto functions are supported, in this case the Armv8.0 SHA1
and SHA2 instructions must also be implemented.
The v8.4 crypto instructions are added to AArch64 only, and not AArch32,
and are made optional extensions to Armv8.2-A.
The user-facing Clang options will map on these new target features, their
naming will be compatible with GCC and added in follow-up patches.
The Armv8.4-A instruction sets can be downloaded here:
https://developer.arm.com/products/architecture/a-profile/exploration-tools
Differential Revision: https://reviews.llvm.org/D48625
llvm-svn: 335953
Summary:
An alternative to D48597.
Fixes [[ https://bugs.llvm.org/show_bug.cgi?id=37936 | PR37936 ]].
The problem is as follows:
1. `indvars` marks `%dec` as `NUW`.
2. `loop-instsimplify` runs `instsimplify`, which constant-folds `%dec` to -1 (D47908)
3. `loop-reduce` tries to do some further modification, but crashes
with an type assertion in cast, because `%dec` is no longer an `Instruction`,
If the runline is split into two, i.e. you first run `-indvars -loop-instsimplify`,
store that into a file, and then run `-loop-reduce`, there is no crash.
So it looks like the problem is due to `-loop-instsimplify` not discarding SCEV.
But in this case we can just not crash if it's not an `Instruction`.
This is just a local fix, unlike D48597, so there may very well be other problems.
Reviewers: mkazantsev, uabelho, sanjoy, silviu.baranga, wmi
Reviewed By: mkazantsev
Subscribers: evstupac, javed.absar, spatel, llvm-commits
Differential Revision: https://reviews.llvm.org/D48599
llvm-svn: 335950
This enables a few requested improvements on the original review of this
script at https://reviews.llvm.org/D46192.
This introduces 2 new command line options:
* --email-report: This option enables specifying who to email the generated
report to. This also enables not sending any email and only printing out
the report on stdout by not specifying this option on the command line.
* --sender: this allows specifying the email address that will be used in
the "From" email header.
I believe that with these options the script starts having the basic
features needed to run it well on a regular basis for a group of
developers.
Differential Revision: https://reviews.llvm.org/D47930
llvm-svn: 335948
Summary:
We now have two sets of generated TableGen files, one for R600 and one
for GCN, so each sub-target now has its own tables of instructions,
registers, ISel patterns, etc. This should help reduce compile time
since each sub-target now only has to consider information that
is specific to itself. This will also help prevent the R600
sub-target from slowing down new features for GCN, like disassembler
support, GlobalISel, etc.
Reviewers: arsenm, nhaehnle, jvesely
Reviewed By: arsenm
Subscribers: MatzeB, kzhuravl, wdng, mgorny, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D46365
llvm-svn: 335942
We don't ever check these again (unless you're using
-fno-integrated-as), so make sure the extracted bits are well-defined.
I don't think it's possible to trigger any of the assertions on trunk,
but it's difficult to prove. (The first one depends on DAGCombine to
minimize the number of set bits in AND masks; I think the others are
mathematically impossible to hit.)
llvm-svn: 335931
This is a recommit of r335879.
We shouldn't add the outliner when compiling at -O0 even if
-enable-machine-outliner is passed in. This makes sure that we
don't add it in this case.
This also removes -O0 from the outliner DWARF test.
llvm-svn: 335930
This change adds experimental support for SHT_RELR sections, proposed
here: https://groups.google.com/forum/#!topic/generic-abi/bX460iggiKg
Definitions for the new ELF section type and dynamic array tags, as well
as the encoding used in the new section are all under discussion and are
subject to change. Use with caution!
Author: rahulchaudhry
Differential Revision: https://reviews.llvm.org/D47919
llvm-svn: 335922
There's no way to expose this difference currently,
but we should use the updated variable because the
original opcodes can go stale if we transform into
something new.
llvm-svn: 335920
This fixes a regression since SVN r334523, where the object files
built targeting MinGW were rejected by GNU binutils tools. Prior to
that commit, we only put constants in comdat for MSVC configurations.
Differential Revision: https://reviews.llvm.org/D48567
llvm-svn: 335918
The format string for formatv allows to specify a custom padding
character instead of the default space. This custom character was
parsed correctly, but not passed on to the formatter.
Patch by Marcel Köppe
Differential Revision: https://reviews.llvm.org/D48140
llvm-svn: 335915
Summary:
The InlinerFunctionImportStats will collect and dump stats regarding how
many function inlined into the module were imported by ThinLTO.
Reviewers: wmi, dexonsmith
Subscribers: mehdi_amini, inglorion, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D48729
llvm-svn: 335914
Mostly just adding checks for Thumb2 instructions which correspond to
ARM instructions which already had diagnostics. While I'm here, also fix
ARM-mode strd to check the input registers correctly.
Differential Revision: https://reviews.llvm.org/D48610
llvm-svn: 335909
When rewriting an alloca partition copy the DL from the
old alloca over the the new one.
Differential Revision: https://reviews.llvm.org/D48640
llvm-svn: 335904
FileOutputBuffer creates a temp file and on commit atomically
renames the temp file to the destination file. Sometimes we
want to modify an existing file in place, but still have the
atomicity guarantee. To do this we can initialize the contents
of the temp file from the destination file (if it exists), that
way the resulting FileOutputBuffer can have only selective
bytes modified. Committing will then atomically replace the
destination file as desired.
llvm-svn: 335902
Craig Topper