This should silence the buildbots until we understand if the clang-format
changes in r221125 have been intentional. See reply on cfe-commits for details.
llvm-svn: 221159
We will use ScalarEvolution in the ScopInfo.cpp to get the loop trip
count, not cache it in the TempScop object.
Differential Revision: http://reviews.llvm.org/D6070
llvm-svn: 221035
Now MaxLoopDepth only lives in Scops not in TempScops anymore.
This is the first part of a series of changes to make TempScops
obsolete.
Differential Revision: http://reviews.llvm.org/D6069
llvm-svn: 221026
Originally we have needed this code to map the isl_id of an array to its base
pointer. However, as now the isl_id contains a reference to the array itself we
obtain the base pointer from this isl_id and we do not need to add this
information to the IDToValue map.
llvm-svn: 220876
The description of the parameter value passed to -enable-polly-aligned did
not make any sense at all, but was just a leftover coming from when this option
was copied form -enable-polly-openmp. We just drop it as the option description
gives sufficient information already.
llvm-svn: 220445
This makes sure we consistently use dbgs() when printing debug output.
Previously, the code just mixed calls to isl_*_dump() with printing to dbgs()
and was relying for both methods to interact in predictable ways (same output
stream, no unexpected reordering of outputs).
llvm-svn: 220443
By adding braces into the DEBUG statement we can make clang-format format code
such as:
DEBUG(stmt1(); stmt2())
as multi-line code:
DEBUG({
stmt1();
stmt2();
});
This makes control-flow in debug statements easier to read.
llvm-svn: 220441
This patch changes the RegionSet type used in ScopDetection from a
std::set to a llvm::SetVector. The reason for the change is to
ensure deterministic output when printing the result of the
analysis. We had a windows buildbot failure for the modified test
because the output was coming in a different order.
Only one test case needed to be modified for this change. We could
use CHECK-DAG directives instead of CHECK in the analysis test cases
because the actual order of scops does not matter, but I think that
change should be done in a separate patch that modifies all the
appliciable tests. I simply modified the test to reflect the
expected deterministic output.
Differential Revision: http://reviews.llvm.org/D5897
llvm-svn: 220423
This patch does not change the semantic on it's own. However, the
dependence analysis as well as dce will now use the newest available
access relation for each memory access, thus if at some point the json
importer or any other pass will run before those two and set a new
access relation the behaviour will be different. In general it is
unclear if the dependence analysis and dce should be run on the old or
new access functions anyway. If we need to access the original access
function from the outside later, we can expose the getter again.
Differential Revision: http://reviews.llvm.org/D5707
llvm-svn: 219612
We restricted the new access functions to be a subset of the old one
because we want to keep the alignment, however if the alignment is
"not special", thus the default for the type, we can allow any access.
Differential Revision: http://reviews.llvm.org/D5680
llvm-svn: 219503
In case the pieceweise affine function used to create an isl_ast_expr
had empty cases (e.g., with contradicting constraints on the
parameters), it was possible that the condition of the isl_ast_expr
select was not a comparison but a constant (thus of type i64).
This patch does two thing:
1) Handle the case the condition of a select is not a i1 type like C.
2) Try to simplify the pieceweise affine functions for the min/max
access when we generate runtime alias checks. That step can often
remove empty or redundant cases as well as redundant constrains.
This fixes bug: http://llvm.org/PR21167
Differential Revision: http://reviews.llvm.org/D5627
llvm-svn: 219208
-Wcomment complained about a "multi-line comment" caused by the
ascii art used in ScopHelper to describe the CFG.
Differential Revision: http://reviews.llvm.org/D5618
llvm-svn: 219207
This resolved the issues with delinearized accesses that might alias,
thus delinearization doesn't deactivate runtime alias checks anymore.
Differential Revision: http://reviews.llvm.org/D5614
llvm-svn: 219078
This class allows to store information about the arrays in the SCoP.
For each base pointer in the SCoP one object is created storing the
type and dimension sizes of the array. The objects can be obtained via
the SCoP, a MemoryAccess or the isl_id associated with the output
dimension of a MemoryAccess (the description of what is accessed).
So far we use the information in the IslExprBuilder to create the
right base type before indexing into the base array. This fixes the
bug http://llvm.org/bugs/show_bug.cgi?id=21113 (both test cases are
included). On top of that we can now build runtime alias checks for
delinearized arrays as the dimension sizes are also part of the
ScopArrayInfo objects.
Differential Revision: http://reviews.llvm.org/D5613
llvm-svn: 219077
Update debug info testcases for the LLVM metadata schema change in
r219010 to fold metadata constant operands into a single `MDString`.
Part of PR17891.
llvm-svn: 219019
+ Generalized function names and comments
+ Removed OpenMP (omp) from the names and comments
+ Use common names (non OpenMP specific) for runtime library call creation
methodes
+ Commented the parallel code generator and all its member functions
+ Refactored some values and methodes
Differential Revision: http://reviews.llvm.org/D4990
llvm-svn: 219003
This also forbids the json importer to access other memory locations
than the original instruction as we to reuse the alignment of the
original load/store.
Differential Revision: http://reviews.llvm.org/D5560
llvm-svn: 218883
The LoopAnnotator doesn't annotate only loops any more, thus it is
called ScopAnnotator from now on.
This also removes unnecessary polly:: namespace tags.
llvm-svn: 218878
The command line flag -polly-annotate-alias-scopes controls whether or not
Polly annotates alias scopes in the new SCoP (default ON). This can improve
later optimizations as the new SCoP is basically an alias free environment for
them.
llvm-svn: 218877
arc unit will now show the number of consecutive tests with the same
result instead of printing a "." for each one. Due to the number of
tests the "dots" didn't fit in one line any more. Furthermore the
result list is shortened, only non passing tests or tests taking
longer than a time threshold (50ms) will be reported (both to the user
and to phabricator).
llvm-svn: 218826
This change allows to annotate all parallel loops with loop id metadata.
Furthermore, it will annotate memory instructions with
llvm.mem.parallel_loop_access metadata for all surrounding parallel loops.
This is especially usefull if an external paralleliser is used.
This also removes the PollyLoopInfo class and comments the
LoopAnnotator.
A test case for multiple parallel loops is attached.
llvm-svn: 218793
We use a parametric abstraction of the domain to split alias groups
if accesses cannot be executed under the same parameter evaluation.
The two test cases check that we can remove alias groups if the
pointers which might alias are never accessed under the same parameter
evaluation and that the minimal/maximal accesses are not global but
with regards to the parameter evaluation.
Differential Revision: http://reviews.llvm.org/D5436
llvm-svn: 218758
If there are multiple read only base addresses in an alias group
we can split it into multiple alias groups each with only one
read only access. This way we might reduce the number of
comparisons significantly as it grows linear in the number of
alias groups but exponential in their size.
Differential Revision: http://reviews.llvm.org/D5435
llvm-svn: 218757
This is just a optimization to save the compile time and execution time
for runtime alias checks if the user guarantees no aliasing all together.
llvm-svn: 218613
If too many parameters are involved in accesses used to create RTCs
we might end up with enormous compile times and RTC expressions.
The reason is that the lexmin/lexmax is dependent on all these
parameters and isl might need to create a case for every "ordering"
of them (e.g., p0 <= p1 <= p2, p1 <= p0 <= p2, ...).
The exact number of parameters allowed in accesses is defined by the
command line option -polly-rtc-max-parameters=XXX and set by default
to 8.
Differential Revision: http://reviews.llvm.org/D5500
llvm-svn: 218566
The run-time alias check places code that involves the base pointer at the
beginning of the SCoP. This breaks if the base pointer is defined inside the
SCoP. Hence, we can only create a run-time alias check if we are sure the base
pointer is not an instruction defined inside the scop. If it is we refuse to
handle the SCoP.
This commit should unbreak most of our current LNT failures.
Differential Revision: http://reviews.llvm.org/D5483
llvm-svn: 218412
This fixes two problems which are usualy caused together:
1) The elements of an isl AST access expression could be pointers
not only integers, floats and vectores thereof.
2) The runtime alias checks need to compare pointers but if they
are of a different type we need to cast them into a "max" type
similar to the non pointer case.
llvm-svn: 218113
This commit drops a call to std::sort, which sorted the base pointers that
possibly alias according to the address at which their corresponding llvm::Value
was allocated. There does not seem to be any good reason, why those pointers
should be (re)sorted and this only makes the output indeterministic.
llvm-svn: 218052
This change will build all alias groups (minimal/maximal accesses
to possible aliasing base pointers) we have to check before
we can assume an alias free environment. It will also use these
to create Runtime Alias Checks (RTC) in the ISL code generation
backend, thus allow us to optimize SCoPs despite possibly aliasing
pointers when this backend is used.
This feature will be enabled for the isl code generator, e.g.,
--polly-code-generator=isl, but disabled for:
- The cloog code generator (still the default).
- The case delinearization is enabled.
- The case non-affine accesses are allowed.
llvm-svn: 218046
We use SplitEdge to split a conditional entry edge of the SCoP region.
However, SplitEdge can cause two different situations (depending on
whether or not the edge is critical). This patch tests
which one is present and deals with the former unhandled one.
It also refactors and unifies the case we have to change the basic
blocks of the SCoP to new ones (see replaceScopAndRegionEntry).
llvm-svn: 217802
During the IslAst parallelism check also compute the minimal dependency
distance and store it in the IstAst for node.
Reviewer: sebpop
Differential Revision: http://reviews.llvm.org/D4987
llvm-svn: 217729
Even though we previously correctly detected the multi-dimensional access
pattern for accesses with a certain base address, we only delinearized
non-affine accesses to this address. Affine accesses have not been touched and
remained as single dimensional accesses. The result was an inconsistent
description of accesses to the same array, with some being one dimensional and
some being multi-dimensional.
This patch ensures that all accesses are delinearized with the same
dimensionality as soon as a single one of them has been detected as non-affine.
While writing this patch, it became evident that the options
-polly-allow-nonaffine and -polly-detect-keep-going have not been properly
supported in case delinearization has been turned on. This patch adds relevant
test coverage and addresses these issues as well. We also added some more
documentation to the functions that are modified in this patch.
This fixes llvm.org/PR20123
Differential Revision: http://reviews.llvm.org/D5329
llvm-svn: 217728
At the moment we assume that only elements of identical size are stored/loaded
to a certain base pointer. This patch adds logic to the scop detection to verify
this.
Differential Revision: http://reviews.llvm.org/D5329
llvm-svn: 217727
We now verify that such functions are correctly detected even in combination
with delinearization. This change is added to ensure we have good test coverage
for the subsequent delinearization fix.
We also remove unnecessary instructions from the test case.
llvm-svn: 217664
This allows us to omit the GuardBB in front of created loops
if we can show the loop trip count is at least one. It also
simplifies the dominance relation inside the new created region.
A GuardBB (even with a constant branch condition) might trigger
false dominance errors during function verification.
Differential Revision: http://reviews.llvm.org/D5297
llvm-svn: 217525
Summary:
+ Refactor the runtime check (RTC) build function
+ Added helper function to create an PollyIRBuilder
+ Change the simplify region function to create not
only unique entry and exit edges but also enfore that
the entry edge is unconditional
+ Cleaned the IslCodeGeneration runOnScop function:
- less post-creation changes of the created IR
+ Adjusted and added test cases
Reviewers: grosser, sebpop, simbuerg, dpeixott
Subscribers: llvm-commits, #polly
Differential Revision: http://reviews.llvm.org/D5076
llvm-svn: 217508
This previous code added in r216842 most likely created unnecessary copies.
Reported-by: Duncan P. N. Exon Smith <dexonsmith@apple.com>
llvm-svn: 217507
It seems we added guards to check for non-existing std::map elements to make
sure they are default constructed before first accessed. Besides, the code
being wrong because of checking Context.NonAffineAccesses[BasePointer].size()
instead of Context.cound(BasePointer), such a check is also not necessary
as std::map takes care of this already.
From the std::map documentation:
"If k does not match the key of any element in the container, the function
inserts a new element with that key and returns a reference to its mapped value.
Notice that this always increases the container size by one, even if no mapped
value is assigned to the element (the element is constructed using its default
constructor)."
llvm-svn: 217506
The -e flag exits the script with a non-zero code if any subcommand
fails. This flag allows us to notice as early as possible if the
test was not properly regenerated using a command like:
$ create_ll.sh t.c && opt < t.ll -polly ...
The above pattern is useful when iteratively developing a test case
to guard against un-noticed syntax errors.
Differential Revision: http://reviews.llvm.org/D5276
llvm-svn: 217463
There was a bug in the IslAst which caused that no more outermost
parallel loops were detected/checked after a parallel outermost loop
of depth 1.
+ Test case attached
llvm-svn: 217452
Thanks to Clemens (hammacher@cs.uni-saarland.de) extension of the
arcanist unit test engine, we can run the llvm-lit tests automatically.
Similar to the linters, aracanist will run all tests for each uploaded
commit and asks the commiter for a statements in case unit tests fail.
To use this feature the unit test engine needs to find the polly build
directory. Currently we support the following setups:
$POLLY_BUILD_DIR (environment variable)
<root>/build
<root>.build
<root>-build
<root:s/src/build>
<cwd>
llvm-svn: 217396
This allows to link Polly's lit.site.cfg from the build into the src directory,
without having it removed by every 'git clean':
ln -s build/tools/polly/test/lit.site.cfg to src/tools/polly/test
Having this file in our src directory allows us to run llvm-lit on specific
test cases in the Polly test directory just by running 'llvm-lit test/case.ll'.
llvm-svn: 217336
In Polly we used to have a mix of test cases, some that used 'opt %s' and others
that used 'opt < %s'. We now change all to use 'opt < %s'. Piping in test files
is preferable as it does prevent temporary files to be written to disk. This
brings us in line with what is usus in LLVM.
llvm-svn: 216816
This replaces the use of %defaultOpts = '-basicaa -polly-prepare' with the
minimal set of passes necessary for a test to succeed. Of the test cases that
previously used %defaultOpts 76 test cases require none of these passes, 42
need -basicaa and only 2 need -polly-prepare. Our change makes this requirement
explicit.
In Polly many test cases have been using a macro '%defaultOpts' which run a
couple of preparing passes before the actual Polly test case. This macro was
introduced very early in the development of Polly and originally contained a
large set of canonicalization passes. However, as the need for additional
canonicalization passes makes test cases harder to understand and also more
fragile in terms of changes in such passes, we aim since a longer time to only
include the minimal set of passes necessary. This patch removes the last
leftovers from of %defaultOpts and brings our tests cases more in line to what
is usus in LLVM itself.
llvm-svn: 216815
Arcanist (arc) will now always run linters before uploading any new
commit to Phabricator. All errors/warnings (or their absence) will be
shown in the web interface together with a explanation by the commiter
(arcanist will ask the commiter if the build was not clean).
The linters include:
- clang-format
- spelling check
- permissions check (aka. chmod)
- filename check
- merge conflict marker check
Note, that their scope is sometimes limited (see .arclint for
details).
This commit also fixes all errors and warnings these linters reported,
namely:
- spelling mistakes and typos
- executable permissions for various text files
Differential Revision: http://reviews.llvm.org/D4916
llvm-svn: 215871
This will spill out information about LLVM-internals. However, in cases
where the name of the Value matches the name of the array in the source,
we provide more useful information. In cases where we spill internals,
the information still might help the user to pin down the correct
arrays.
The problem we face here is: The error is pinned to the debug location
of one of the offending values out of the alias set instead of all of them.
The more information we give the user about the set of aliasing
pointers the better.
llvm-svn: 215830
This reverts commit 215466 (and 215528, a trivial formatting fix).
The intention of these commits is a good one, but unfortunately they broke
our LNT buildbot:
http://lab.llvm.org:8011/builders/perf-x86_64-penryn-O3-polly-codegen-isl
Several of the cleanup changes that have been combined in this 'fixup' are
trivial and could probably be committed as obvious changes without risking to
break the build. The remaining changes are little and it should be easy to
figure out what went wrong.
llvm-svn: 215817
This reverts commit 215684. The intention of the commit is great, but
unfortunately it seems to be the cause of 14 LNT test suite failures:
http://lab.llvm.org:8011/builders/perf-x86_64-penryn-O3-polly/builds/116
To make our buildbots and performance testers green until this issue is solved,
we temporarily revert this commit.
llvm-svn: 215816
The support is limited to signed modulo access and condition
expressions with a constant right hand side, e.g., A[i % 2] or
A[i % 9]. Test cases are modified according to this new feature and
new test cases are added.
Differential Revision: http://reviews.llvm.org/D4843
llvm-svn: 215684
Store the llvm::Value pointers of the AliasSet instead of the AliasSet
itself.
We have to be careful about changed IR when the message is generated,
because the Value pointers might not exist anymore. This would render
the Diagnostic invalid. For now we just assert there.
Simply do not retreive a diagnostic message after the IR has changed
it's not valid information anyway.
llvm-svn: 215625
Remove the PoCC and ScopLib support from Polly as we do not have a
user/maintainer for it.
Differential Revision: http://reviews.llvm.org/D4871
llvm-svn: 215563
Use the explicit analysis if possible, only for splitBlock we will continue
to use the Pass * argument. This change allows us to remove the getAnalysis
calls from the code generation.
llvm-svn: 215121
There is no needed for neither 1-dimensional nor higher dimensional arrays to
require positive offsets in the outermost array dimension.
We originally introduced this assumption with the support for delinearizing
multi-dimensional arrays.
llvm-svn: 214665
+ Remove the class IslGenerator which duplicates the functionality of
IslExprBuilder.
+ Use the IslExprBuilder to create code for memory access relations.
+ Also handle array types during access creation.
+ Enable scev codegen for one of the transformed memory access tests,
thus access creation without canonical induction variables available.
+ Update one test case to the new output.
llvm-svn: 214659
The updated tests use a different context than the old ones did.
Other than that only their path and the code generation we use
changed.
llvm-svn: 214657
+ Split all reduction dependences and map them to the causing memory accesses.
+ Print the types & base addresses of broken reductions for each "reduction
parallel" marked loop (OpenMP style).
+ 3 test cases to show how reductions are now represented in the isl ast.
The mapping "(ast) loops -> broken reductions" is also needed to find the
memory accesses we need to privatize in a loop.
llvm-svn: 214489
The functions isParallel, isInnermostParallel and IsOutermostParallel in
IslAstInfo will now return true even in the presence of broken reductions.
To compensate for this change the negated result of isReductionParallel can
be used.
llvm-svn: 214488
+ Perform the parallelism check on the innermost loop only once.
+ Inline the markOpenmpParallel function.
+ Rename all IslAstUserPayload * into Payload to make it consistent.
llvm-svn: 214448
Whe we build the IslAst we visit for nodes (in pre and post order) as well as
user/domain nodes. As these two sets are non overlapping we do not need to
check if we annotated a node earlier when we visit it.
llvm-svn: 214170
Use the fact that if we visit a for node first in pre and next in post order
we know we did not visit any children, thus we found an innermost loop.
+ Test case for an innermost loop with a conditional inside
llvm-svn: 213870
+ Renamed context into build when it's the isl_ast_build
+ Use the IslAstInfo functions to extract the schedule of a node
+ Use the IslAstInfo functions to extract the build/context of a node
+ Move the payload struct into the IslAstInfo class
+ Use a constructor and destructor (also new and delete) to
allocate/initialize the payload struct
llvm-svn: 213792
Offer the static functions to extract information out of an IslAst for node
as members of IslAstInfo not as top level entities.
+ Refactor common code
+ Add isParallel and isReductionParallel
+ Rename IslAstUser to IslAstUserPayload to make it clear this is just a (or
the) payload struct.
llvm-svn: 213272
This pulls in a couple of minor cleanups in isl. More importantly, in
preparation of the upcoming LLVM releases this change brings us back on a
released version of isl.
llvm-svn: 213062
+ Introduced dependency type TYPE_TC_RED to represent the transitive closure
(& the reverse) of reduction dependences. These are used when we check for
reduction parallel loops.
+ Test cases including loop reversals and modulo schedules which compute
reductions in a alternated order.
llvm-svn: 213019
We move back to a simple approach where the liveout is the last must-write
statement for a data-location plus all may-write statements. The previous
approach did not work out. We would have to consider per-data-access
dependences, instead of per-statement dependences to correct it. As this adds
complexity and it seems we would not gain anything over the simpler approach
that we implement in this commit, I moved us back to the old approach of
computing the liveout, but enhanced it to also add may-write accesses.
We also fix the test case and explain why we can not perform dead code
elimination in this case.
llvm-svn: 212925
As our delinearization works optimistically, we need in some cases run-time
checks that verify our optimistic assumptions. A simple example is the
following code:
void foo(long n, long m, long o, double A[n][m][o]) {
for (long i = 0; i < 100; i++)
for (long j = 0; j < 150; j++)
for (long k = 0; k < 200; k++)
A[i][j][k] = 1.0;
}
After clang linearized the access to A and we delinearized it again to
A[i][j][k] we need to ensure that we do not access the delinearized array
out of bounds (this information is not available in LLVM-IR). Hence, we
need to verify the following constraints at run-time:
CHECK: Assumed Context:
CHECK: [o, m] -> { : m >= 150 and o >= 200 }
llvm-svn: 212198
To translate the old induction variables as they exist before Polly to new
new induction variables introduced during AST code generation we need to
generate code that computes the new values from the old ones. We can do this
by just looking at the arguments isl generates in each scheduled statement.
Example:
// Old
for i
S(i)
// New
for c0
for c1
S(c0 + c1)
To get the value of i, we need to compute 'c0 + c1'. This expression is readily
available in the user statements generated by isl and just needs to be
translated to LLVM-IR.
This replaces an old confusing construct that constructed during ast generation
an isl multi affine expression that described this relation and which was then
again ast generated for each statement and argument when translating the isl ast
to LLVM-IR. This approach was difficult to understand and the additional ast
generation calls where entirely redundant as isl provides the relevant
expressions as arguments of the generated user statements.
llvm-svn: 212186
This change is particularly useful in the code generation as we need
to know which binary operator/identity element we need to combine/initialize
the privatization locations.
+ Print the reduction type for each memory access
+ Adjusted the test cases to comply with the new output format and
to test for the right reduction type
llvm-svn: 212126
Iterate over all store memory accesses and check for valid binary reduction
candidate loads by following the operands of the stored value. For each
candidate pair we check if they have the same base address and there are no
other accesses which may overlap with them. This ensures that no intermediate
value can escape into other memory locations or is overwritten at some point.
+ 17 test cases for reduction detection and reduction dependency modeling
llvm-svn: 211957
Enabling -keep-going in ScopDetection causes expansion to an invalid
Scop candidate.
Region A <- Valid candidate
|
Region B <- Invalid candidate
If -keep-going is enabled, ScopDetection would expand A to A+B because
the RejectLog is never checked for errors during expansion.
With this patch only A becomes a valid Scop.
llvm-svn: 211875
This change will ease the transision to multiple reductions per statement as
we can now distinguish the effects of multiple reductions in the same
statement.
+ Wrapped reduction dependences are used to compute privatization dependences
+ Modified test cases to account for the change
llvm-svn: 211795
This dependency analysis will keep track of memory accesses if they might be
part of a reduction. If not, the dependences are tracked on a statement level.
The main reason to do this is to reduce the compile time while beeing able to
distinguish the effects of reduction and non-reduction accesses.
+ Adjusted two test cases
llvm-svn: 211794
Use a container class to store the reject logs. Delegating most calls to
the internal std::map and add a few convenient shortcuts (e.g.,
hasErrors()).
llvm-svn: 211780
Add support for generating optimization remarks after completing the
detection of Scops.
The goal is to provide end-users with useful hints about opportunities that
help to increase the size of the detected Scops in their code.
By default the remark is unspecified and the debug location is empty. Future
patches have to expand on the messages generated.
This patch brings a simple test case for ReportFuncCall to demonstrate the
feature.
Reports all missed opportunities to increase the size/number of valid
Scops:
clang <...> -Rpass-missed="polly-detect" <...>
opt <...> -pass-remarks-missed="polly-detect" <...>
Reports beginning and end of all valid Scops:
clang <...> -Rpass="polly-detect" <...>
opt <...> -pass-remarks="polly-detect" <...>
Differential Revision: http://reviews.llvm.org/D4171
llvm-svn: 211769
Due to bad habit we sometimes used a variable %defaultOpts that listed
a set of passes commonly run to prepare for Polly. None of these test cases
actually needs special preparation and only two of them need the 'basicaa' to
be scheduled. Scheduling the required alias analysis explicitly makes the test
cases clearer.
llvm-svn: 211671
We had a set of test cases that have been incomplete and XFAILED. This patch
completes a couple of the interesting ones and removes the ones which seem
redundant or not sufficiently reduced to be useful.
llvm-svn: 211670
Insert a header into the new testcase containing a sample RUN line a FIXME and
an XFAIL. Then insert the formated C code and finally the LLVM-IR without
attributes, the module ID or the target triple.
llvm-svn: 211612
We use llvm.codegen intrinsic to generate code for embedded LLVM-IR
strings. The reason we introduce such a intrinsic is that previous
clang/opt tools was NOT linked with various LLVM targets and their
AsmParsers and AsmPrinters. Since clang/opt been linked with all the
needed libraries, we no longer need the llvm.codegen intrinsic.
llvm-svn: 211573
+ Collect reduction dependences
+ Introduced TYPE_RED in Dependences.h which can be used to obtain the
reduction dependences
+ Used TYPE_RED to prevent parallelization while we do not have a privatizing
code generation
+ Relax the dependences for non-parallel code generation
+ Add privatization dependences to ensure correctness
+ 12 Test cases to check for reduction and privatization dependences
llvm-svn: 211369
+ Flag to indicate reduction like statements
+ Command line option to (dis)allow multiplicative reduction opcodes
+ Two simple positive test cases, one fp test case w and w/o fast math
+ One "negative" test case (only reduction like but no reduction)
llvm-svn: 211114
+ Added const iterator version
+ Changed name to begin/end to allow range loops
+ Changed call sites to range loops
+ Changed typename to (const_)iterator
llvm-svn: 210927
In general this fixes ambiguity that can arise from using
a different namespace that declares the same symbols as
we do.
One example inside llvm would be:
createIndVarSimplifyPass(..);
Which can be found in:
llvm/Transforms/Scalar.h
and
polly/LinkAllPasses.h
llvm-svn: 210755
Fixes#19976.
The error log does not contain an error, in case we reject a candidate
without generating a diagnostic message by using invalid<>(...). This is
the case for the top-level region of a function.
The patch comes without a test-case because adding a useful one requires
additional code just for triggering it. Before the patch it would only trigger,
if we try to print the CFG with Scop error annotations.
llvm-svn: 210753
We do this currently only for test cases where we have integer offsets that
clearly access array dimensions out-of-bound.
-; for (long i = 0; i < n; i++)
-; for (long j = 0; j < m; j++)
-; for (long k = 0; k < o; k++)
+; for (long i = 0; i < n - 3; i++)
+; for (long j = 4; j < m; j++)
+; for (long k = 0; k < o - 7; k++)
; A[i+3][j-4][k+7] = 1.0;
This will be helpful if we later want to simplify the access functions under the
assumption that they do not access memory out of bounds.
llvm-svn: 210179
Without this patch, the testcase would fail on the delinearization of the second
array:
; void foo(long n, long m, long o, double A[n][m][o]) {
; for (long i = 0; i < n; i++)
; for (long j = 0; j < m; j++)
; for (long k = 0; k < o; k++) {
; A[i+3][j-4][k+7] = 1.0;
; A[i][0][k] = 2.0;
; }
; }
; CHECK: [n, m, o] -> { Stmt_for_body6[i0, i1, i2] -> MemRef_A[3 + i0, -4 + i1, 7 + i2] };
; CHECK: [n, m, o] -> { Stmt_for_body6[i0, i1, i2] -> MemRef_A[i0, 0, i2] };
Here is the output of FileCheck on the testcase without this patch:
; CHECK: [n, m, o] -> { Stmt_for_body6[i0, i1, i2] -> MemRef_A[i0, 0, i2] };
^
<stdin>:26:2: note: possible intended match here
[n, m, o] -> { Stmt_for_body6[i0, i1, i2] -> MemRef_A[o0] };
^
It is possible to find a good delinearization for A[i][0][k] only in the context
of the delinearization of both array accesses.
There are two ways to delinearize together all array subscripts touching the
same base address: either duplicate the code from scop detection to first gather
all array references and then run the delinearization; or as implemented in this
patch, use the same delinearization info that we computed during scop detection.
llvm-svn: 210117
+ CL-option --polly-tile-sizes=<int,...,int>
The i'th value is used as a tile size for dimension i, if
there is no i'th value, the value of --polly-default-tile-size is
used
+ CL-option --polly-default-tile-size=int
Used if no tile size is given for a dimension i
+ 3 Simple testcases
llvm-svn: 209753
Instead of relying on the delinearization to infer the size of an element,
compute the element size from the base address type. This is a much more precise
way of computing the element size than before, as we would have mixed together
the size of an element with the strides of the innermost dimension.
llvm-svn: 209695
Support a 'keep-going' mode for the ScopDetection. In this mode, we just keep
on detecting, even if we encounter an error.
This is useful for diagnosing SCoP candidates. Sometimes you want all the
errors. Invalid SCoPs will still be refused in the end, we just refuse to
abort on the first error.
llvm-svn: 209574
This stores all RejectReasons created for one region
in a RejectLog inside the DetectionContext. For now
this only keeps track of the last error.
A separate patch will enable the tracking of all errors.
This patch itself does no harm (yet).
llvm-svn: 209572
SVN r209103 removed the OwningPtr variant of the MemoryBuffer APIs. Switch to
the equivalent std::unique_ptr versions. This should clear up the build bots.
llvm-svn: 209104
Tag the GPGPU codegen test cases as unsupported if the nvptx target is not
included in the current llvm build.
Contributed-by: Yabin Hu <yabin.hwu@gmail.com>
llvm-svn: 208779
definition below all of the header #include lines, Polly edition.
If you want to know more details about this, you can see the recent
commits to Debug.h in LLVM. This is just the Polly segment of a cleanup
I'm doing globally for this macro.
llvm-svn: 206852
Commit r206510 falsely advertised to fix the load cases, even though it only
fixed the store case. This commit adds the same fix for the load case including
the missing test coverage.
llvm-svn: 206577
Even tough we may want to generate a vector load, the address from which to load
still is a scalar. Make sure even if previous address computations may have been
vectorized, that the addresses are also available as scalars.
This fixes http://llvm.org/PR19469
Reported-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
llvm-svn: 206510
The following example shows a non-parallel loop
void f(int a[]) {
int i;
for (i = 0; i < 10; ++i)
A[i] = A[i+5];
}
which, in case we import a schedule that limits the iteration domain
to 0 <= i < 5, becomes parallel. Previously we crashed in such cases, now we
just recognize it as parallel.
This fixes http://llvm.org/PR19435
Reported-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
llvm-svn: 206318
We update to a newer version of isl, which includes changes to the compute
out facility that make it a lot more predicable. With our new value, we can
reliably bail out for all reported bugs, while still being able to compute
dependences for all but two test cases in the LLVM test suite. For the remaining
two test cases, the dependence problem we construct is unnecessarily complex,
so there is hope we can improve on this. However, to avoid any future issues,
having a reliable compute out facility in place is important.
llvm-svn: 206106
We only supported a very old version of OpenScop that was entirely different
to what OpenScop is today. To not confuse people, we remove this old and
unusable support. If anyone is interested to add OpenScop support back in,
the relevant patches are available in version control.
llvm-svn: 206026
Tobias Grosser