This patch makes a number of improvements to the Pipe interface.
1) An interface (PipeBase) is provided which exposes pure virtual
methods for any implementation of Pipe to override. While not
strictly necessary, this helps catch errors where the interfaces
are out of sync.
2) All methods return lldb_private::Error instead of returning bool
or void. This allows richer error information to be propagated
up to LLDB.
3) A new ReadWithTimeout() method is exposed in the base class and
implemented on Windows.
4) Support for both named and anonymous pipes is exposed through the
base interface and implemented on Windows. For creating a new
pipe, both named and anonymous pipes are supported, and for
opening an existing pipe, only named pipes are supported.
New methods described in points #3 and #4 are stubbed out on posix,
but fully implemented on Windows. These should be implemented by
someone on the linux / mac / bsd side.
Reviewed by: Greg Clayton, Oleksiy Vyalov
Differential Revision: http://reviews.llvm.org/D6686
llvm-svn: 224442
names can then be used in place of breakpoint id's or breakpoint id
ranges in all the commands that operate on breakpoints.
<rdar://problem/10103959>
llvm-svn: 224392
section for x86_64 and i386 targets on Darwin systems. Currently only the
compact unwind encoding for normal frame-using functions is supported but it
will be easy handle frameless functions when I have a bit more free time to
test it. The LSDA and personality routines for functions are also retrieved
correctly for functions from the compact unwind section.
This new code is very fresh -- it passes the lldb testsuite and I've done
by-hand inspection of many functions and am getting correct behavior for all
of them. There may need to be some bug fixing over the next couple weeks as
I exercise and test it further. But I think it's fine right now so I'm
committing it.
<rdar://problem/13220837>
llvm-svn: 223625
support to LLDB. It includes the following:
- Changed DeclVendor to TypeVendor.
- Made the ObjCLanguageRuntime provide a DeclVendor
rather than a TypeVendor.
- Changed the consumers of TypeVendors to use
DeclVendors instead.
- Provided a few convenience functions on
ClangASTContext to make that easier.
llvm-svn: 223433
a number of warnings to be enabled. The one making the most noise
across the code base right now is CLANG_WARN_UNREACHABLE_CODE = YES.
llvm-svn: 219910
after all the commands have been executed except if one of the commands was an execution control
command that stopped because of a signal or exception.
Also adds a variant of SBCommandInterpreter::HandleCommand that takes an SBExecutionContext. That
way you can run an lldb command targeted at a particular target, thread or process w/o having to
select same before running the command.
Also exposes CommandInterpreter::HandleCommandsFromFile to the SBCommandInterpreter API, since that
seemed generally useful.
llvm-svn: 219654
Reviewed at http://reviews.llvm.org/D5592
This patch gives LLDB some ability to interact with AddressSanitizer runtime library, on top of what we already have (historical memory stack traces provided by ASan). Namely, that's the ability to stop on an error caught by ASan, and access the report information that are associated with it. The report information is also exposed into SB API.
More precisely this patch...
adds a new plugin type, InstrumentationRuntime, which should serve as a generic superclass for other instrumentation runtime libraries, these plugins get notified when modules are loaded, so they get a chance to "activate" when a specific dynamic library is loaded
an instance of this plugin type, AddressSanitizerRuntime, which activates itself when it sees the ASan dynamic library or founds ASan statically linked in the executable
adds a collection of these plugins into the Process class
AddressSanitizerRuntime sets an internal breakpoint on __asan::AsanDie(), and when this breakpoint gets hit, it retrieves the report information from ASan
this breakpoint is then exposed as a new StopReason, eStopReasonInstrumentation, with a new StopInfo subclass, InstrumentationRuntimeStopInfo
the StopInfo superclass is extended with a m_extended_info field (it's a StructuredData::ObjectSP), that can hold arbitrary JSON-like data, which is the way the new plugin provides the report data
the "thread info" command now accepts a "-s" flag that prints out the JSON data of a stop reason (same way the "-j" flag works now)
SBThread has a new API, GetStopReasonExtendedInfoAsJSON, which dumps the JSON string into a SBStream
adds a test case for all of this
I plan to also get rid of the original ASan plugin (memory history stack traces) and use an instance of AddressSanitizerRuntime for that purpose.
Kuba
llvm-svn: 219546
Also cleans up the lldb Xcode project's Source > Host > posix directory
to use group-relative file naming. Also alphabetizes file entries.
llvm-svn: 219373
the user level. It adds the ability to invent new stepping modes implemented by python classes,
and to view the current thread plan stack and to some extent alter it.
I haven't gotten to documentation or tests yet. But this should not cause any behavior changes
if you don't use it, so its safe to check it in now and work on it incrementally.
llvm-svn: 218642
This change does the following:
* Remove test/c++/...
* Add gtest.
* Add gtest/unittest directory for unittesting individual classes.
* Add an initial Plugins/Process?linux/ThreadStateCoordinatorTest.cpp.
- currently failing a test (intentional).
- added a bare-bones ThreadStateCoordinator.cpp to Plugins/Process/Linux,
more soon. Just enough to prove out running gtest on Ubuntu and MacOSX.
* Added recursive make machinery so that doing a 'make' in gtest/ is
sufficient to kick off the existing test several directories down.
- Caveat - I currently short circuit from gtest/unittest/Makefile directly to
the one and only gtest/unittest/Plugins/Process/Linux directory. We'll need
to add the intervening layers. I haven't done this yet since to fix the
Xcode test failure correspondence, I may need to add a python layer which
might just handle the directory crawling.
* Added an Xcode project to the lldb workspace for gtest.
- Runs the recursive make system in gtest/Makefile.
- Default target is 'test'. test and clean are supported.
- Currently does not support test failure file/line correspondence.
Requires a bit of text transformation to hook that up.
llvm-svn: 218460
The purpose of a ProcessStructReader is to allow intelligent reading of data from the underlying process
Traditionally, the way this has been handled is to have a load_address and shuffle it around, and use Process::ReadMemory()-kind APIs
With a ProcessStructReader one can define a clang type that matches exactly the definition of the thing they are trying to ingest from the inferior process, and then just point LLDB at where the data is
Since this work is done in terms of clang types, one can honor packed/aligned attributes, sizes of types on the inferior architecture, and similar tricky caveats without having to hardcode them
llvm-svn: 217644
This patch moves creates a thread abstraction that represents a
thread running inside the LLDB process. This is a replacement for
otherwise using lldb::thread_t, and provides a platform agnostic
interface to managing these threads.
Differential Revision: http://reviews.llvm.org/D5198
Reviewed by: Jim Ingham
llvm-svn: 217460
Type Validators have the purpose of looking at a ValueObject, and making sure that there is nothing semantically wrong about the object's contents
For instance, if you have a class that represents a speed, the validator might trigger if the speed value is greater than the speed of light
This first patch hooks up the moving parts in the formatters subsystem, but does not link ValueObjects to TypeValidators, nor lets the SB API be exposed to validators
It also lacks the notion of Python validators
llvm-svn: 217277
See http://reviews.llvm.org/D5108 for details.
This change does the following:
* eliminates the Process::GetUnixSignals() virtual method and replaces with a fixed getter.
* replaces the Process UnixSignals storage with a shared pointer.
* adds a Process constructor variant that can be passed the UnixSignalsSP. When the constructor without the UnixSignalsSP is specified, the Host's default UnixSignals is used.
* adds a host-specific version of GetUnixSignals() that is used when we need the host's appropriate UnixSignals variant.
* replaces GetUnixSignals() overrides in PlatformElfCore, ProcessGDBRemote, ProcessFreeBSD and ProcessLinux with code that appropriately sets the Process::UnixSignals for the process.
This change also enables some future patches that will enable llgs to be used for local Linux debugging.
llvm-svn: 216748
LLDB had implemented its own DynamicLibrary class for plugin
support. LLVM has an equivalent mechanism, so this patch deletes
the duplicated code in LLDB and updates LLDB to reference the
mechanism provided by LLVM.
llvm-svn: 216606
What it does:
- it introduces a concept of EncodingToType to the ObjCLanguageRuntime
The ObjC runtime has a "type encoding" feature that describes types as strings
The EncodingToType is a decoder for that format, making types out of type encoding strings
This feature already existed in some shape as we were using it to create method signatures out of the runtime, but this checkin extends the parser to support the full syntax, and moves things so that more parts of LLDB have access to this decoder
- it splits the ClassDescriptorV2 object to its own file, it was starting to grow too large
- it adds to the ClassDescriptor mechanism a notion of ivar storage; the ObjC runtime vends ivar information as well as method information
While ivar information is not ready for prime type (i.e. we don't want to add it to the runtime generated types for expression evaluator usage), there are potentially useful scenarios in which realizing ivar types could be useful. For now, the ClassDescriptor is going to hold ivar information directly. Existing code already allows describing ivars, this patch hooks those moving parts up so that one can actually ask a ClassDescriptor about ivars for the class it represents
and as a couple minor niceties:
- it makes it possible to retrieve the LLDB ClangASTContext that is associated to a clang::ASTContext
- it extends the ValueObject-to-ClassDescriptor API in the language runtime to deal correctly with base-class hierarchies
llvm-svn: 216026
This patch creates a HostInfo class, a static class used to answer
basic queries about the host platform. As part of this change,
some functionality is moved from Host to HostInfo, and relevant
fixups are performed in the rest of the codebase.
This is part of a larger effort to isolate more code in the Host
layer into platform-specific groups, to make it easier to make
platform specific changes for a particular Host without breaking
other hosts.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4963
llvm-svn: 215992
More specifically, this change can be summarized as follows:
1) Makes an lldbHostPosix library which contains code common to
all posix platforms.
2) Creates Host/FileSystem.h which defines a common FileSystem
interface.
3) Implements FileSystem.h in Host/windows and Host/posix.
4) Creates Host/FileCache.h, implemented in Host/common, which
defines a class useful for storing handles to open files needed
by the debugger.
Differential Revision: http://reviews.llvm.org/D4889
llvm-svn: 215775
FileAction was previously a nested class in ProcessLaunchInfo.
This led to some unfortunate style consequences, such as requiring
the AddPosixSpawnFileAction() funciton to be defined in the Target
layer, instead of the more appropriate Host layer. This patch
makes FileAction its own independent class in the Target layer,
and then moves AddPosixSpawnFileAction() into Host as a result.
Differential Revision: http://reviews.llvm.org/D4877
llvm-svn: 215649
This patch moves the logic of many common socket operations into
its own class lldb_private::Socket. It then modifies the
ConnectionFileDescriptor class, and a few users of that class,
to use this new Socket class instead of hardcoding socket logic
directly.
Finally, this patch creates a common interface called IOObject for
any objects that support reading and writing, so that endpoints
such as sockets and files can be treated the same.
Differential Revision: http://reviews.llvm.org/D4641
Reviewed by: Todd Fiala, Greg Clayton
llvm-svn: 214984
The new implementation is located in source/Core/FastDemangle.cpp. It’s fairly straightforward C code with a few basic C++ extensions. It should compile with little or no change on a variety of platforms, but of course it is still only useful for symbols that comply with the Itanium ABI mangling spec (plus a few Clang extensions.)
<rdar://problem/15397553> <rdar://problem/15794867>
llvm-svn: 213671
This change comprises of additions and some minor changes in order that
"kalimba" is listed as a supported platform and that debugging any
kalimbas results in PlatformKalimba being associated with the target.
The changes are as follows:
* The PlatformKalimba implementation itself
* A tweak to ArchSpec
* .note parsing for Kalimba in ObjectFileELF.cpp
* Plugin registration
* Makefile additions
Change by Matthew Gardiner
Minor tweak for cmake and Xcode by Todd Fiala
Tested:
Ubuntu 14.04 x86_64, clang 3.5-built lldb, all tests pass.
MacOSX 10.9.4, Xcode 6.0 Beta 1-built lldb, all tests pass.
llvm-svn: 213158
LinuxThread.cpp
LinuxThread.h
NativeRegisterContext.h
ProcessLinux.cpp
ProcessLinux.h
ProcessMonitor.cpp
ProcessMonitor.h
Were inserted in the CopyFiles phase of the "desktop" aggregate target. That caused them to get
copied to /usr/shared/man/man1 on install, which isn't right. Not sure why they were there...
I removed them. If this was supposed to achieve some other purpose, we should discuss how to do
that correctly on the mailing list.
<rdar://problem/17642262>
llvm-svn: 213094
This reverses out the options validators changes. We'll get these
back in once the changes to the output can be resolved.
Restores broken tests on FreeBSD, Linux, MacOSX.
Changes reverted: r212500, r212317, r212290.
llvm-svn: 212543
Windows does support pipes, but they do so in a slightly different way. Added a Host layer which abstracts the use of pipes into a new Pipe class that everyone can use.
Windows benefits include:
- Being able to interrupt running processes when IO is directly hooked up
- being able to interrupt long running python scripts
- being able to interrupt anything based on ConnectionFileDescriptor
llvm-svn: 212220
The only part using Carbon is a function in Host.mm used to open a file in Xcode.
That code is broken and it is no longer useful as Xcode supports LLDB natively.
llvm-svn: 212208
Also moves NativeRegisterContextLinux* files into the Linux directory.
These, like NativeProcessLinux, should only be built on Linux or a cross
compiler with proper headers.
llvm-svn: 212074
This change brings in lldb-gdbserver (llgs) specifically for Linux x86_64.
(More architectures coming soon).
Not every debugserver option is covered yet. Currently
the lldb-gdbserver command line can start unattached,
start attached to a pid (process-name attach not supported yet),
or accept lldb attaching and launching a process or connecting
by process id.
The history of this large change can be found here:
https://github.com/tfiala/lldb/tree/dev-tfiala-native-protocol-linux-x86_64
Until mid/late April, I was not sharing the work and continued
to rebase it off of head (developed via id tfiala@google.com). I switched over to
user todd.fiala@gmail.com in the middle, and once I went to github, I did
merges rather than rebasing so I could share with others.
llvm-svn: 212069
Both NativeProcessLinux (in llgs branch) and Linux Host.cpp had similar code to handle /proc
file reading. I factored that out into a new Linux-specific ProcFileReader class and added a method
that the llgs branch will use for line-by-line parsing.
This change also adds numerous Linux-specific files to Xcode that were missing from the Xcode
project files.
Related to https://github.com/tfiala/lldb/issues/27
llvm-svn: 212015
Elevate ProcessInfo and ProcessLaunchInfo into their own headers.
llgs will be using ProcessLaunchInfo but doesn't need to pull in
the rest of Process.h.
This also moves a bunch of implementation details from the header
declarations into ProcessInfo.cpp and ProcessLaunchInfo.cpp.
Tested on Ubuntu 14.04 Cmake and MacOSX Xcode.
Related to https://github.com/tfiala/lldb/issues/26.
llvm-svn: 212005
See http://reviews.llvm.org/D4221 for details.
This commit allows you to control the signals that lldb will suppress, stop or forward using the Python and C++ APIs.
Change by Russell Harmon.
Xcode build system changes (and any mistakes) by Todd Fiala. Tested on MacOSX 10.9.3 and Xcode 6 beta. (Xcode 5 is hitting the dependency checker crasher on all my systems).
llvm-svn: 211526
lldb support. I'll be doing more testing & cleanup but I wanted to
get the initial checkin done.
This adds a new SBExpressionOptions::SetLanguage API for selecting a
language of an expression.
I added adds a new SBThread::GetInfoItemByPathString for retriving
information about a thread from that thread's StructuredData.
I added a new StructuredData class for representing
key-value/array/dictionary information (e.g. JSON formatted data).
Helper functions to read JSON and create a StructuredData object,
and to print a StructuredData object in JSON format are included.
A few Cocoa / Cocoa Touch data formatters were updated by Enrico
to track changes in iOS 8 / Yosemite.
Before we query a thread's extended information, the system runtime may
provide hints to the remote debug stub that it will use to retrieve values
out of runtime structures. I added a new SystemRuntime method
AddThreadExtendedInfoPacketHints which allows the SystemRuntime to add
key-value type data to the initial request that we send to the remote stub.
The thread-format formatter string can now retrieve values out of a thread's
extended info structured data. The default thread-format string picks up
two of these - thread.info.activity.name and thread.info.trace_messages.
I added a new "jThreadExtendedInfo" packet in debugserver; I will
add documentation to the lldb-gdb-remote.txt doc soon. It accepts
JSON formatted arguments (most importantly, "thread":threadnum) and
it returns a variety of information regarding the thread to lldb
in JSON format. This JSON return is scanned into a StructuredData
object that is associated with the thread; UI layers can query the
thread's StructuredData to see if key-values are present, and if
so, show them to the user. These key-values are likely to be
specific to different targets with some commonality among many
targets. For instance, many targets will be able to advertise the
pthread_t value for a thread.
I added an initial rough cut of "thread info" command which will print
the information about a thread from the jThreadExtendedInfo result.
I need to do more work to make this format reasonably.
Han Ming added calls into the pmenergy and pmsample libraries if
debugserver is run on Mac OS X Yosemite to get information about the
inferior's power use.
I added support to debugserver for gathering the Genealogy information
about threads, if it exists, and returning it in the jThreadExtendedInfo
JSON result.
llvm-svn: 210874
lldb-gdbserver and NativeProcessProtocol will use MemoryRegionInfo
but don't want to pull in Process.h. Pull this declaration and
definition out into its own header.
llvm-svn: 210213
- Fix Xcode project to have source files for SBTypeEnumMember.h/SBTypeEnumMember.cpp in the right place
- Rename a member variable to inluce "_sp" suffix since it is a shared pointer
- Cleanup initialization code for TypeEnumMemberImpl to not warn about out of order initialization
llvm-svn: 210051
Need to spend a little more time with suppressing the debugserver 64-to-32 bit warnings.
Will re-submit after I get the warnings properly suppressed.
llvm-svn: 209151
Also moved it into the lldb_private namespace.
The llgs branch is making use of this interface and its use is not
strictly limited to POSIX.
llvm-svn: 209016
These changes were written by Greg Clayton, Jim Ingham, Jason Molenda.
It builds cleanly against TOT llvm with xcodebuild. I updated the
cmake files by visual inspection but did not try a build. I haven't
built these sources on any non-Mac platforms - I don't think this
patch adds any code that requires darwin, but please let me know if
I missed something.
In debugserver, MachProcess.cpp and MachTask.cpp were renamed to
MachProcess.mm and MachTask.mm as they picked up some new Objective-C
code needed to launch processes when running on iOS.
llvm-svn: 205113
(lldb) b puts
(lldb) expr -g -i0 -- (int)puts("hello")
First we will stop at the entry point of the expression before it runs, then we can step over a few times and hit the breakpoint in "puts", then we can continue and finishing stepping and fininsh the expression.
Main features:
- New ObjectFileJIT class that can be easily created for JIT functions
- debug info can now be enabled when parsing expressions
- source for any function that is run throught the JIT is now saved in LLDB process specific temp directory and cleaned up on exit
- "expr -g --" allows you to single step through your expression function with source code
<rdar://problem/16382881>
llvm-svn: 204682
Please do not add header files that are required in public APIs without first checking with us. This broke the LLDB builds at Apple because the lldb-dll-export.h wasn't included in the LLDB.framework and it was being included by public API header files.
llvm-svn: 203177
libldi library to collect extended backtrace information; switch
to the libBacktraceRecording library and its APIs. Complete the
work of adding QueueItems to Queues and allow for the QueueItems
to be interrogated about their extended backtraces in turn.
There's still cleanup and documentation to do on this code but the
code is functional and I it's a good time to get the work-in-progress
checked in.
<rdar://problem/15314027>
llvm-svn: 200822
The many many benefits include:
1 - Input/Output/Error streams are now handled as real streams not a push style input
2 - auto completion in python embedded interpreter
3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use
4 - it is now possible to use curses to drive LLDB (please try the "gui" command)
We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases.
llvm-svn: 200263
So, rename the class for what it truly is: a FormattersContainer
Also do a bunch of related text substitutions in the interest of overall naming clarity
llvm-svn: 197795
libdispatch aka Grand Central Dispatch (GCD) queues. Still fleshing out the
documentation and testing of these but the overall API is settling down so it's
a good time to check it in.
<rdar://problem/15600370>
llvm-svn: 197190
<rdar://problem/15314403>
This patch adds a new lldb_private::SectionLoadHistory class that tracks what shared libraries were loaded given a process stop ID. This allows us to keep a history of the sections that were loaded for a time T. Many items in history objects will rely upon the process stop ID in the future.
llvm-svn: 196557
lldb_private::Debugger was #including some "lldb/API" header files which causes tools (lldb-platform and lldb-gdbserver) that link against the internals only (no API layer) to fail to link depending on which calls were being used.
Also fixed the current working directory so that it gets set correctly for remote test suite runs. Now the remote working directory is set to: "ARCH/TESTNUM/..." where ARCH is the current architecture name and "TESTNUM" is the current test number.
Fixed the "lldb-platform" and "lldb-gdbserver" to not warn about mismatched visibility settings by having each have their own exports file which contains nothing. This forces all symbols to not be exported, and also quiets the linker warnings.
llvm-svn: 196141
the installed SDK to using the current OS installed headers/libraries.
This change is to address the removal of the Python framework
from the Mac OS X 10.9 (Mavericks) SDK, and is the recommended
workaround via https://developer.apple.com/library/mac/technotes/tn2328/_index.html
llvm-svn: 195557
Added a new "Host/Debug.h" which contains the pure virtual class definitions for NativeProcessProtocol and NativeThreadProtocol. These classes are host layer classes that, over time, every host that supports debugging will implement once.
Then the new "lldb-gdbserver" binary in the tools directory will be able to make a remote debugging binary from these native classes, and we will also be able to have a new lldb_private::Process class that implements native debugging using these classes.
So as soon as linux and MacOSX switch over to using this layer, everyone will get native and remote debugging.
This check-in is primarily to get the needed code in so that poeple can start trying to implement the NativeProcessProtocol and NativeThreadProtocol and use it in the GDBRemoteCommunicationServer class to implement a GDB server for remote debugging.
llvm-svn: 195369
Example code:
remote_platform = lldb.SBPlatform("remote-macosx");
remote_platform.SetWorkingDirectory("/private/tmp")
debugger.SetSelectedPlatform(remote_platform)
connect_options = lldb.SBPlatformConnectOptions("connect://localhost:1111");
err = remote_platform.ConnectRemote(connect_options)
if err.Success():
print >> result, 'Connected to remote platform:'
print >> result, 'hostname: %s' % (remote_platform.GetHostname())
src = lldb.SBFileSpec("/Applications/Xcode.app/Contents/SharedFrameworks/LLDB.framework", False)
dst = lldb.SBFileSpec()
# copy src to platform working directory since "dst" is empty
err = remote_platform.Install(src, dst);
if err.Success():
print >> result, '%s installed successfully' % (src)
else:
print >> result, 'error: failed to install "%s": %s' % (src, err)
Implemented many calls needed in lldb-platform to be able to install a directory that contains symlinks, file and directories.
The remote lldb-platform can now launch GDB servers on the remote system so that remote debugging can be spawned through the remote platform when connected to a remote platform.
The API in SBPlatform is subject to change and will be getting many new functions.
llvm-svn: 195273
do anything right now. Add a few new methods to the Thread base
class which HistoryThread needs. I think I updated all the
CMakeLists files correctly for the new plugin.
llvm-svn: 194756
Added two new GDB server packets to debugserver: "QSaveRegisterState" and "QRestoreRegiterState".
"QSaveRegisterState" makes the remote GDB server save all register values and it returns a save identifier as an unsigned integer. This packet can be used prior to running expressions to save all registers.
All registers can them we later restored with "QRestoreRegiterState:SAVEID" what SAVEID is the integer identifier that was returned from the call to QSaveRegisterState.
Cleaned up redundant code in lldb_private::Thread, lldb_private::ThreadPlanCallFunction.
Moved the lldb_private::Thread::RegisterCheckpoint into its own header file and it is now in the lldb_private namespace. Trimmed down the RegisterCheckpoint class to omit stuff that wasn't used (the stack ID).
Added a few new virtual methods to lldb_private::RegisterContext that allow subclasses to efficiently save/restore register states and changed the RegisterContextGDBRemote to take advantage of these new calls.
llvm-svn: 194621
Still working out some of the details of these classes but
I wanted to get the overall structure checked in.
<rdar://problem/15314068>
llvm-svn: 194245
Inlined a copy of cxa_demangle.cpp from:
http://llvm.org/svn/llvm-project/libcxxabi/trunk/src/cxa_demangle.cpp
For systems that don't have demangling built into the system, and for systems that don't want to use the version that is installed. Defining LLDB_USE_BUILTIN_DEMANGLER in your build system allows you to use the built in demangler. This setting is curently automatically enabled for Windows builds.
llvm-svn: 193708
DumpValueObject() 2.0
This checkin restores pre-Xcode5 functionality to the "po" (expr -O) command:
- expr now has a new --description-verbosity (-v) argument, which takes either compact or full as a value (-v is the same as -vfull)
When the full mode is on, "po" will show the extended output with type name, persistent variable name and value, as in
(lldb) expr -O -v -- foo
(id) $0 = 0x000000010010baf0 {
1 = 2;
2 = 3;
}
When -v is omitted, or -vcompact is passed, the Xcode5-style output will be shown, as in
(lldb) expr -O -- foo
{
1 = 2;
2 = 3;
}
- for a non-ObjectiveC object, LLDB will still try to retrieve a summary and/or value to display
(lldb) po 5
5
-v also works in this mode
(lldb) expr -O -vfull -- 5
(int) $4 = 5
On top of that, this is a major refactoring of the ValueObject printing code. The functionality is now factored into a ValueObjectPrinter class for easier maintenance in the future
DumpValueObject() was turned into an instance method ValueObject::Dump() which simply calls through to the printer code, Dump_Impl has been removed
Test case to follow
llvm-svn: 191694
SVN r189964 provided a sample Python script to inspect unordered(multi){set|map} with synthetic children, contribued by Jared Grubb
This checkin converts that sample script to a C++ provider built into LLDB
A test case is also provided
llvm-svn: 190564
Summary:
This merge brings in the improved 'platform' command that knows how to
interface with remote machines; that is, query OS/kernel information, push
and pull files, run shell commands, etc... and implementation for the new
communication packets that back that interface, at least on Darwin based
operating systems via the POSIXPlatform class. Linux support is coming soon.
Verified the test suite runs cleanly on Linux (x86_64), build OK on Mac OS
X Mountain Lion.
Additional improvements (not in the source SVN branch 'lldb-platform-work'):
- cmake build scripts for lldb-platform
- cleanup test suite
- documentation stub for qPlatform_RunCommand
- use log class instead of printf() directly
- reverted work-in-progress-looking changes from test/types/TestAbstract.py that work towards running the test suite remotely.
- add new logging category 'platform'
Reviewers: Matt Kopec, Greg Clayton
Review: http://llvm-reviews.chandlerc.com/D1493
llvm-svn: 189295
- MachO files now correctly extract the UUID all the time
- More file size and offset verification done for universal mach-o files to watch for truncated files
- ObjectContainerBSDArchive now supports enumerating all objects in BSD archives (.a files)
- lldb_private::Module() can not be properly constructed using a ModuleSpec for a .o file in a .a file
- The BSD archive plug-in shares its cache for GetModuleSpecifications() and the create callback
- Improved printing for ModuleSpec objects
llvm-svn: 186211
take for threads created while the program is running. Remove the testcase skips from TestConcurrentEvents.py,
since they all pass now, and fix TestWatchpointMultipleThreads.py - which should have caught this problem -
so it doesn't artificially break on new thread creation before the watchpoint triggers.
llvm.org/pr16566
<rdar://problem/14383244>
llvm-svn: 186132
A long time ago we start with clang types that were created by the symbol files and there were many functions in lldb_private::ClangASTContext that helped. Later we create ClangASTType which contains a clang::ASTContext and an opauque QualType, but we didn't switch over to fully using it. There were a lot of places where we would pass around a raw clang_type_t and also pass along a clang::ASTContext separately. This left room for error.
This checkin change all type code over to use ClangASTType everywhere and I cleaned up the interfaces quite a bit. Any code that was in ClangASTContext that was type related, was moved over into ClangASTType. All code that used these types was switched over to use all of the new goodness.
llvm-svn: 186130
There are two new classes:
lldb::SBModuleSpec
lldb::SBModuleSpecList
The SBModuleSpec wraps up a lldb_private::ModuleSpec, and SBModuleSpecList wraps up a lldb_private::ModuleSpecList.
llvm-svn: 185877
The semi-unofficial way of returning a status from a Python command was to return a string (e.g. return "no such variable was found") that LLDB would pick as a clue of an error having happened
This checkin changes that:
- SBCommandReturnObject now exports a SetError() call, which can take an SBError or a plain C-string
- script commands now drop any return value and expect the SBCommandReturnObject ("return object") to be filled in appropriately - if you do nothing, a success will be assumed
If your commands were relying on returning a value and having LLDB pick that up as an error, please change your commands to SetError() through the return object or expect changes in behavior
llvm-svn: 184893
Now, the way SWIG wrappers call into Python is through a utility PyCallable object, which overloads operator () to look like a normal function call
Plus, using the SBTypeToSWIGWrapper() family of functions, we can call python functions transparently as if they were plain C functions
Using this new technique should make adding new Python call points easier and quicker
The PyCallable is a generally useful facility, and we might want to consider moving it to a separate layer where other parts of LLDB can use it
llvm-svn: 184608
Any time a SWIG wrapper needs a PyObject for an SB object, it now should call into SBTypeToSWIGWrapper<SBType>(SBType*)
If you try to use it on an SBType for which there is not an implementation yet, LLDB will fail to link - just add your specialization to python-swigsafecast.swig and rebuild
This is the first step in simplifying our SWIG Wrapper layer
llvm-svn: 184580
This is a rewrite of the command history facility of LLDB
It takes the history management out of the CommandInterpreter into its own CommandHistory class
It reimplements the command history command to allow more combinations of options to work correctly (e.g. com hist -c 1 -s 5)
It adds a new --wipe (-w) option to command history to allow clearing the history on demand
It extends the lldbtest runCmd: and expect: methods to allow adding commands to history if need be
It adds a test case for the reimplemented facility
llvm-svn: 184140
LLDB API versioning
This checkin makes the LLDB API versioned
We are starting at version 1.0 and will then revise and update the API from there
Further details:
API versioning
---------------------------------
The LLDB API is versioned independently of the LLDB source base
Our API version numbers are composed of a major and a minor number
The major number means a complete and stable revision of the API. Major numbers are compatibility breakers
(i.e. when we change the API major number, there is no promise of compatibility with the previous major version
and we are free to remove and/or change any APIs)
Minor numbers are a work-in-progress evolution of the API. APIs will not be removed or changed across minor versions
(minors do not break compatibility). However, we can deprecate APIs in minor versions or add new APIs in minor versions
A deprecated API is supposedly going to be removed in the next major version and will generate a warning if used
APIs we add in minor versions will not be removed (at least until the following major) but they might theoretically be deprecated
in a following minor version
Users are discouraged from using the LLDB version number to test for API features and should instead use the API version checking
as discussed below
API version checking
---------------------------------
You can (optionally) sign into an API version checking feature
To do so you need to define three macros:
LLDB_API_CHECK_VERSIONING - define to any value (or no value)
LLDB_API_MAJOR_VERSION_WANTED - which major version of the LLDB API you are targeting
LLDB_API_MINOR_VERSION_WANTED - which minor version of the LLDB API you are targeting
If these macros exist - LLDB will enable version checking of the public API
If LLDB_API_MAJOR_VERSION is not equal to LLDB_API_MAJOR_VERSION_WANTED we will immediately halt your compilation with an error
This is by design, since we do not make any promise of compatibility across major versions - if you really want to test your luck, disable the versioning altogether
If the major version test passes, you have signed up for a specific minor version of the API
Whenever we add or deprecate an API in a minor version, we will mark it with either
LLDB_API_NEW_IN_DOT_x - this API is new in LLDB .x
LLDB_API_DEPRECATED_IN_DOT_x - this API is deprecated as of .x
If you are using an API new in DOT_x
if LLDB_API_MINOR_VERSION_WANTED >= x then all is well, else you will get a compilation error
This is meant to prevent you from using APIs that are newer than whatever LLDB you want to target
If you are using an API deprecated in DOT_x
if LLDB_API_MINOR_VERSION_WANTED >= x then you will get a compilation warning, else all is well
This is meant to let you know that you are using an API that is deprecated and might go away
Caveats
---------------------------------
Version checking only works on clang on OSX - you will get an error if you try to enable it on any other OS/compiler
If you want to enable version checking on other platforms, you will need to define appropriate implementations for
LLDB_API_IMPL_DEPRECATED and LLDB_API_IMPL_TOONEW and any other infrastructure your compiler needs for this purpose
We have no deprecation-as-error mode
There is no support for API versioning in Python
We reserve to use macros whose names begin with LLDB_API_ and you should not use them in your source code as they might conflict
with present or future macro names we are using to implement versioning
For API implementors:
If you need to add a new public API call, please remember to add the LLDB_API_NEW_IN_DOT_x marker in the header file
and when you are done with adding stuff, to also update LLDB_API_MINOR_VERSION
If you want to remove a function, deprecate it first, by using LLDB_API_DEPRECATED_IN_DOT_x
and when you are done with deprecating stuff, to also update LLDB_API_MINOR_VERSION
A new major version (LLDB_API_MAJOR_VERSION++) is your only chance to remove and/or change API calls
but is probably quite a big deal and you might want to consider deprecating the existing calls for a while
before doing your changes
A couple more caveats:
Currently, the lldb-tool does NOT use the version checking feature. It would be a nice future improvement to make it do that, once we have proper version checking on other OSs
APIs marked as deprecated by a comment in the source are still deprecated just that way. A good purpose for API 1.1 might be to deprecate them with appropriate markers
llvm-svn: 183244
Yet another implementation of the python in dSYM autoload :)
This time we are going with a ternary setting:
true - load, do not warn
false - do not load, do not warn
warn - do not load, warn (default)
llvm-svn: 182414
value. This fixes problems, for instance, with the StepRange plans, where they know that
they explained the stop because they were at their "run to here" breakpoint, then deleted
that breakpoint, so when they got asked again, doh! I had done this for a couple of plans
in an ad hoc fashion, this just formalizes it.
Also add a "ResumeRequested" in Process so that the code in the completion handlers can
tell the ShouldStop logic they want to resume rather than just directly resuming. That allows
us to handle resuming in a more controlled fashion.
Also, SetPublicState can take a "restarted" flag, so that it doesn't drop the run lock when
the target was immediately restarted.
--This line, and those below , will be ignored--
M test/lang/objc/objc-dynamic-value/TestObjCDynamicValue.py
M include/lldb/Target/ThreadList.h
M include/lldb/Target/ThreadPlanStepOut.h
M include/lldb/Target/Thread.h
M include/lldb/Target/ThreadPlanBase.h
M include/lldb/Target/ThreadPlanStepThrough.h
M include/lldb/Target/ThreadPlanStepInstruction.h
M include/lldb/Target/ThreadPlanStepInRange.h
M include/lldb/Target/ThreadPlanStepOverBreakpoint.h
M include/lldb/Target/ThreadPlanStepUntil.h
M include/lldb/Target/StopInfo.h
M include/lldb/Target/Process.h
M include/lldb/Target/ThreadPlanRunToAddress.h
M include/lldb/Target/ThreadPlan.h
M include/lldb/Target/ThreadPlanCallFunction.h
M include/lldb/Target/ThreadPlanStepOverRange.h
M source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.h
M source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
M source/Target/StopInfo.cpp
M source/Target/Process.cpp
M source/Target/ThreadPlanRunToAddress.cpp
M source/Target/ThreadPlan.cpp
M source/Target/ThreadPlanCallFunction.cpp
M source/Target/ThreadPlanStepOverRange.cpp
M source/Target/ThreadList.cpp
M source/Target/ThreadPlanStepOut.cpp
M source/Target/Thread.cpp
M source/Target/ThreadPlanBase.cpp
M source/Target/ThreadPlanStepThrough.cpp
M source/Target/ThreadPlanStepInstruction.cpp
M source/Target/ThreadPlanStepInRange.cpp
M source/Target/ThreadPlanStepOverBreakpoint.cpp
M source/Target/ThreadPlanStepUntil.cpp
M lldb.xcodeproj/xcshareddata/xcschemes/Run Testsuite.xcscheme
llvm-svn: 181381
<rdar://problem/13723772>
Modified the lldb_private::Thread to work much better with the OperatingSystem plug-ins. Operating system plug-ins can now return have a "core" key/value pair in each thread dictionary for the OperatingSystemPython plug-ins which allows the core threads to be contained with memory threads. It also allows these memory threads to be stepped, resumed, and controlled just as if they were the actual backing threads themselves.
A few things are introduced:
- lldb_private::Thread now has a GetProtocolID() method which returns the thread protocol ID for a given thread. The protocol ID (Thread::GetProtocolID()) is usually the same as the thread id (Thread::GetID()), but it can differ when a memory thread has its own id, but is backed by an actual API thread.
- Cleaned up the Thread::WillResume() code to do the mandatory parts in Thread::ShouldResume(), and let the thread subclasses override the Thread::WillResume() which is now just a notification.
- Cleaned up ClearStackFrames() implementations so that fewer thread subclasses needed to override them
- Changed the POSIXThread class a bit since it overrode Thread::WillResume(). It is doing the wrong thing by calling "Thread::SetResumeState()" on its own, this shouldn't be done by thread subclasses, but the current code might rely on it so I left it in with a TODO comment with an explanation.
llvm-svn: 180886
Providing a dummy RegisterContext to secure against faulty Python OS plugins that do not return a valid RegisterContext
The RegisterContextDummy exports a PC with a constant 0xFFFFFFFFFFFFFFFF value
llvm-svn: 180033
information about each variable that needs to
be materialized for an expression to work. The
next step is to migrate all materialization code
from ClangExpressionDeclMap to Materializer, and
to use it for variable materialization.
llvm-svn: 179245
from IRExecutionUnit into a superclass called
IRMemoryMap. IRMemoryMap handles all reading and
writing, ensuring that areas are kept track of and
memory is properly cached (and deleted).
Also fixed several cases where we would simply leak
binary data in the target process over time. Now
the expression objects explicitly own their
IRExecutionUnit and delete it when they go away. This
is why I had to modify ClangUserExpression,
ClangUtilityFunction, and ClangFunction.
As a side effect of this, I am removing the JIT
mutex for an IRMemoryMap. If it turns out that we
need this mutex, I'll add it in then, but right now
it's just adding complexity.
This is part of a more general project to make
expressions fully reusable. The next step is to
make materialization and dematerialization use
the IRMemoryMap API rather than writing and
reading directly from the process's memory.
This will allow the IR interpreter to use the
same data, but in the host's memory, without having
to use a different set of pointers.
llvm-svn: 178832
LLDB is crashing when logging is enabled from lldb-perf-clang. This has to do with the global destructor chain as the process and its threads are being torn down.
All logging channels now make one and only one instance that is kept in a global pointer which is never freed. This guarantees that logging can correctly continue as the process tears itself down.
llvm-svn: 178191
- TestCase.m_thread is now filled in with the first thread that has a valid
stop reason. This eliminates the need for the SelectMyThread() functions.
- The first thread that stops for a reason is also set as the selected thread
in the process in case any command line commands are run.
- Changed launch over to take a SBLaunchInfo parameter so that the launch
function doesn't keep getting new arguments as they are needed.
- TestCase::Setup() and TestCase::Launch(SBLaunchInfo) now return bool to
indicate success of setup and launch.
- ActionWanted::Next(SBThread) was renamed to ActionWanted::StepOver(SBThread)
- ActionWanted::Finish(SBThread) was renamed to ActionWanted::StepOut(SBThread)
llvm-svn: 177376
and the JITted code are managed by a standalone
class that handles memory management itself.
I have removed RecordingMemoryManager and
ProcessDataAllocator, which filled similar roles
and had confusing ownership, with a common class
called IRExecutionUnit. The IRExecutionUnit
manages all allocations ever made for an expression
and frees them when it goes away. It also contains
the code generator and can vend the Module for an
expression to other clases.
The end goal here is to make the output of the
expression parser re-usable; that is, to avoid
re-parsing when re-parsing isn't necessary.
I've also cleaned up some code and used weak pointers
in more places. Please let me know if you see any
leaks; I checked myself as well but I might have
missed a case.
llvm-svn: 177364
- don't use preprocessor macros
- use switch statements
- don't put anything in the lldb namespace, use "lldb_perf" namespace.
- Pass the action struct into each TestStep() for each step fill in
- Modify the ActionWanted class to have accessors to make the continue, next, finish, kill instead of using preproc macros
llvm-svn: 177332
This is a very basic implementation of a library that easily allows to drive LLDB.framework to write test cases for performance
This is separate from the LLDB testsuite in test/ in that:
a) this uses C++ instead of Python to avoid measures being affected by SWIG
b) this is in very early development and needs lots of tweaking before it can be considered functionally complete
c) this is not meant to test correctness but to help catch performance regressions
There is a sample application built against the library (in darwin/sketch) that uses the famous sample app Sketch as an inferior to measure certain basic parameters of LLDB's behavior.
The resulting output is a PLIST much like the following:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<array>
<dict>
<key>fetch-frames</key>
<real>0.13161715522222225</real>
</dict>
<dict>
<key>file-line-bkpt</key>
<real>0.029111678750000002</real>
</dict>
<dict>
<key>fetch-modules</key>
<real>0.00026376766666666668</real>
</dict>
<dict>
<key>fetch-vars</key>
<real>0.17820429311111111</real>
</dict>
<dict>
<key>run-expr</key>
<real>0.029676525769230768</real>
</dict>
</array>
</plist>
Areas for improvement:
- code cleanups (I will be out of the office for a couple days this coming week, but please keep ideas coming!)
- more metrics and test cases
- better error checking
This toolkit also comprises a simple event-loop-driven controller for LLDB, similar yet much simpler to what the Driver does to implement the lldb command-line tool.
llvm-svn: 176715
The notion of Crossref command has long been forgotten, and there is nothing using CommandObjectCrossref in the current LLDB codebase
However, this was causing a conflict with process plugins and command aliases ending up in an infinite loop under situations such as:
(lldb) command alias monitor process plugin packet monitor
(lldb) process att -n Calendar
Process 28709 stopped
Executable module set to "/Applications/Calendar.app/Contents/MacOS/Calendar".
Architecture set to: x86_64-apple-macosx.
(lldb) command alias monitor process plugin packet monitor
This fixes the loop (and consequent crash) by disposing of Crossref commands and related code
llvm-svn: 175831
Adding data formatters for iterators for std::map and std::vector (both libc++ and libstdcpp)
This does not include reverse iterators since they are both trickier (due to requirements the standard imposes on them) and much less useful
llvm-svn: 175787
Also added a TimeSpecTimeout class which can be used with any calls that take a "struct timespec *" as an argument. It is used by the KQueue class.
Also updated some project settings.
llvm-svn: 175377
Split some NS* formatters in their own source files
Refactored a utility function for the C++ formatters to use
Fixed the skip-summary test case to be explicit about requiring libstdc++ for operation
llvm-svn: 175323
Data formatters now cache themselves.
This commit provides a new formatter cache mechanism. Upon resolving a formatter (summary or synthetic), LLDB remembers the resolution for later faster retrieval.
Also moved the data formatters subsystem from the core to its own group and folder for easier management, and done some code reorganization.
The ObjC runtime v1 now returns a class name if asked for the dynamic type of an object. This is required for formatters caching to work with the v1 runtime.
Lastly, this commit disposes of the old hack where ValueObjects had to remember whether they were queried for formatters with their static or dynamic type.
Now the ValueObjectDynamicValue class works well enough that we can use its dynamic value setting for the same purpose.
llvm-svn: 173728
Removing the IsDynamic() and GetStaticValue() calls, so that they will default to the base class behavior:
- non-dynamic
- itself as the static value
This is in contrast with the previous behavior which could be confusing and could potentially cause issues when using those objects
llvm-svn: 166857
it to print the old and new values.
Temporarily disable the "out of scope" checking since it didn't work correctly, and was
not what people generally expected watchpoints to be doing.
llvm-svn: 166472
Added commands to the KDP plug-in that allow sending raw commands through the KDP protocol. You specify a command byte and a payload as ASCII hex bytes, and the packet is created with a valid header/sequenceID/length and sent. The command responds with a raw ASCII hex string that contains all bytes in the reply including the header.
An example of sending a read register packet for the GPR on x86_64:
(lldb) process plugin packet send --command 0x07 --payload 0100000004000000
llvm-svn: 166346
This checkin adds the capability for LLDB to load plugins from external dylibs that can provide new commands
It exports an SBCommand class from the public API layer, and a new SBCommandPluginInterface
There is a minimal load-only plugin manager built into the debugger, which can be accessed via Debugger::LoadPlugin.
Plugins are loaded from two locations at debugger startup (LLDB.framework/Resources/PlugIns and ~/Library/Application Support/LLDB/PlugIns) and more can be (re)loaded via the "plugin load" command
For an example of how to make a plugin, refer to the fooplugin.cpp file in examples/plugins/commands
Caveats:
Currently, the new API objects and features are not exposed via Python.
The new commands can only be "parsed" (i.e. not raw) and get their command line via a char** parameter (we do not expose our internal Args object)
There is no unloading feature, which can potentially lead to leaks if you overwrite the commands by reloading the same or different plugins
There is no API exposed for option parsing, which means you may need to use getopt or roll-your-own
llvm-svn: 164865
which builds a Debug+Asserts build of Clang and
links LLDB against it. The Debug configuration
builds Clang with Release+Asserts, for faster
linking and smaller memory footprint when debugging
the build LLDB.
llvm-svn: 164573
Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes:
- Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file".
- modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly
- Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was.
- modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile()
Cleaned up header includes a bit as well.
llvm-svn: 162860
- no setting auto completion
- very manual and error prone way of getting/setting variables
- tons of code duplication
- useless instance names for processes, threads
Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing".
llvm-svn: 162366
Record the snapshot of our watched value when the watchpoint is set or hit.
And report the old/new values when watchpoint is triggered. Add some test scenarios.
llvm-svn: 161785
libc++. We also no longer use the GNU extensions
to C++ and C (we didn't use them anyway).
This also means that the LLVM we use must be
built with the new libc++.
I will commit llvm.zip next.
<rdar://problem/11930775>
llvm-svn: 161562
Use the built in demangler for Apple builds for now which has needed demangling fixes, and make the cxa_demangle.cpp use rtti in the Xcode project settings as it requires it be enabled.
llvm-svn: 161323
Fixed a case where the install header phase in the Xcode project would not set the LLDB_VERSION #define correctly. It has now been fixed to key off of the CURRENT_PROJECT_VERSION which will get auto updated with "agvtool bump -all". This was done by adding a build setting to the install-headers makefile based target.
llvm-svn: 156535
Fixed the DisassemblerLLVMC disassembler to parse more efficiently instead of parsing opcodes over and over. The InstructionLLVMC class now only reads the opcode in the InstructionLLVMC::Decode function. This can be done very efficiently for ARM and architectures that have fixed opcode sizes. For x64 it still calls the disassembler to get the byte size.
Moved the lldb_private::Instruction::Dump(...) function up into the lldb_private::Instruction class and it now uses the function that gets the mnemonic, operandes and comments so that all disassembly is using the same code.
Added StreamString::FillLastLineToColumn() to allow filling a line up to a column with a character (which is used by the lldb_private::Instruction::Dump(...) function).
Modified the Opcode::GetData() fucntion to "do the right thing" for thumb instructions.
llvm-svn: 156532
Switch over to the "*-apple-macosx" for desktop and "*-apple-ios" for iOS triples.
Also make the selection process for auto selecting platforms based off of an arch much better.
llvm-svn: 156354
should be MasterPlans that want to stay on the plan stack. So make all plans NOT
MasterPlans by default and then have the SB API's and the CommandObjectThread step
commands set this explicitly.
Also added a "clean up" phase to the Thread::ShouldStop so that if plans get stranded
on the stack, we can remove them. This is done by adding an IsPlanStale method to the
thread plans, and if the plan can know that it is no longer relevant, it returns true,
and the plan and its sub-plans will get discarded.
llvm-svn: 156101
Fixed an issue that would happen when using debug map with DWARF in the .o files where we wouldn't ever track down the actual definition for a type when things were in namespaces. We now serialize the decl context information into an intermediate format which allows us to track down the correct definition for a type regardless of which DWARF symbol file it comes from. We do this by creating a "DWARFDeclContext" object that contains the DW_TAG + name for each item in a decl context which we can then use to veto potential accelerator table matches. For example, the accelerator tables store the basename of the type, so if you have "std::vector<int>", we would end up with an accelerator table entry for the type that contained "vector<int>", which we would then search for using a DWARFDeclContext object that contained:
[0] DW_TAG_class_type "vector<int>"
[1] DW_TAG_namespace "std"
This is currently used to track down forward declarations for things like "class a:🅱️:Foo;".
llvm-svn: 155488
spin up a temporary "private state thread" that will respond to events from the lower level process plugins. This check-in should work to do
that, but it is still buggy. However, if you don't call functions on the private state thread, these changes make no difference.
This patch also moves the code in the AppleObjCRuntime step-through-trampoline handler that might call functions (in the case where the debug
server doesn't support the memory allocate/deallocate packet) out to a safe place to do that call.
llvm-svn: 154230
This abstracts read/write locks on the current host system. It is currently backed by pthread_rwlock_t objects so it should work on all unix systems.
We also need a way to control multi-threaded access to the process through the public API when it is running. For example it isn't a good idea to try and get stack frames while the process is running. To implement this, the lldb_private::Process class now contains a ReadWriteLock member variable named m_run_lock which is used to control the public process state. The public process state represents the state of the process as the client knows it. The private is used to control the actual current process state. So the public state of the process can be stopped, yet the private state can be running when evaluating an expression for example.
Adding the read/write lock where readers are clients that want the process to stay stopped, and writers are clients that run the process, allows us to accurately control multi-threaded access to the process.
Switched the SBThread and SBFrame over to us shared pointers to the ExecutionContextRef class instead of making their own class to track this. This fixed an issue with assigning on SBFrame to another and will also centralize the code that tracks weak references to execution context objects into one location.
llvm-svn: 154099
They are truncated when generating the version
numbers seen in the headers, so for example
lldb-100.1 would have #define LLDB_VERSION=100
llvm-svn: 154074
Fixed an issue that could cause circular type parsing that will assert and kill LLDB.
Prior to this fix the DWARF parser would always create class types and not start their definitions (for both C++ and ObjC classes) until we were asked to complete the class later. When we had cases like:
class A
{
class B
{
};
};
We would alway try to complete A before specifying "A" as the decl context for B. Turns out we can just start the definition and still not complete the class since we can check the TagDecl::isCompleteDefinition() function. This only works for C++ types. This means we will not be pulling in the full definition of parent classes all the time and should help with our memory consumption and also reduce the amount of debug info we have to parse.
I also reduced redundant code that was checking in a lldb::clang_type_t was a possible C++ dynamic type since it was still completing the type, just to see if it was dynamic. This was fixed in another function that was checking for a type being dynamic as an ObjC or a C++ type, but there was dedicated fucntion for C++ that we missed.
llvm-svn: 153713
Made sure that the root XPC service validate the right before starting the service. The right is created and authenticated by clients (in this case, lldb) and transferred over for validiation.
llvm-svn: 152802
shouldn't compile any of the XPC support code.
Update macosx/Host.mm to use that define.
Add a LLDB_DISABLE_PYTHON ifdef block around a new function in
Core/FormatManager.cpp.
<rdar://problem/10942125>
llvm-svn: 152293
Added a new makefile target to help us with Apple builds where the installhdrs
will copy the headers for the shared library. Prior to this fix, the install
headers directory would contain the unix style paths to all public header
files ("#include lldb/API/SBDefines.h") instead of the fixed up framework
header paths ("#include <LLDB/SBDefines.h>").
llvm-svn: 152253
This fix really needed to happen as a previous fix I had submitted for
calculating symbol sizes made many symbols appear to have zero size since
the function that was calculating the symbol size was calling another function
that would cause the calculation to happen again. This resulted in some symbols
having zero size when they shouldn't. This could then cause infinite stack
traces and many other side affects.
llvm-svn: 152244
Zachary Turner