As part of D84741, this adds a target hook for the
preferPredicatedReductionSelect option and makes use
of it under MVE, allowing us to tail predicate most
reduction loops.
Differential Revision: https://reviews.llvm.org/D85980
Commit dbcfbffc adds ppc.readflm and ppc.setflm intrinsics to read or
write FPSCR register. This patch adds them to Clang.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D85874
If the type T is incomplete then sizeof(T) results in C++ compilation error at line:
static constexpr bool value = sizeof(T) <= (2 * sizeof(void *));
This patch allows incomplete types in parameters of function. Example:
using SomeFunc = void(SomeIncompleteType &);
llvm::unique_function<SomeFuncType> SomeFunc;
Reviewers: DaniilSuchkov, vvereschaka
Differential Revision: https://reviews.llvm.org/D81554
This patch adds support for referencing different abbrev tables. We use
'ID' to distinguish abbrev tables and use 'AbbrevTableID' to explicitly
assign an abbrev table to compilation units.
The syntax is:
```
debug_abbrev:
- ID: 0
Table:
...
- ID: 1
Table:
...
debug_info:
- ...
AbbrevTableID: 1 ## Reference the second abbrev table.
- ...
AbbrevTableID: 0 ## Reference the first abbrev table.
```
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83116
This patch adds support for emitting multiple abbrev tables. Currently,
compilation units will always reference the first abbrev table.
Reviewed By: jhenderson, labath
Differential Revision: https://reviews.llvm.org/D86194
Summary:
- HIP uses an unsized extern array `extern __shared__ T s[]` to declare
the dynamic shared memory, which size is not known at the
compile time.
Reviewers: arsenm, yaxunl, kpyzhov, b-sumner
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82496
This patch is the initial support for the General Dynamic Thread Local
Local Storage model to produce code sequence and relocations correct
to the ABI for the model when using PC relative memory operations.
Patch by: NeHuang
Reviewed By: stefanp
Differential Revision: https://reviews.llvm.org/D82315
When sampling from images with coordinates that only have 16 bit
accuracy, convert the image intrinsic call to use a16 or g16.
This does only happen if the target hardware supports it.
An alternative would be to always apply this combination, independent of
the target hardware and extend 16 bit arguments to 32 bit arguments
during legalization. To me, this sounds like an unnecessary roundtrip
that could prevent some further InstCombine optimizations.
Differential Revision: https://reviews.llvm.org/D85887
Currently we have to set 'Machine' to something in our
YAML descriptions. Usually we use 'EM_X86_64' for 64-bit targets
and 'EM_386' for 32-bit targets. At the same time, in fact, in most
cases our tests do not need a machine type and we can use
'EM_NONE'.
This is cleaner, because avoids the need of using a particular machine.
In this patch I've made the 'Machine' key optional (the default value,
when it is not specified is `EM_NONE`) and removed it (where possible)
from yaml2obj, obj2yaml and llvm-readobj tests.
There are few tests left where I decided not to remove it, because
I didn't want to touch CHECK lines or doing anything more complex
than a removing a "Machine: *" line and formatting lines around.
Differential revision: https://reviews.llvm.org/D86202
This patch moves FixedPointSemantics and APFixedPoint
from Clang to LLVM ADT.
This will make it easier to use the fixed-point
classes in LLVM for constructing an IR builder for
fixed-point and for reusing the APFixedPoint class
for constant evaluation purposes.
RFC: http://lists.llvm.org/pipermail/llvm-dev/2020-August/144025.html
Reviewed By: leonardchan, rjmccall
Differential Revision: https://reviews.llvm.org/D85312
This commit introduced a non-trivial compile time regression that needs
to be addressed: https://reviews.llvm.org/D70365#2227627
Given that it is unclear how long that will take, I'll revert it for
now.
This reverts commit eedf18fc1f.
There's a potential motivating case to increase this limit in PR47191:
http://bugs.llvm.org/PR47191
But first we should make it less hacky. The limit in InstCombine is directly tied
to this value because an increase there can cause asserts in the underlying value
tracking calls if not changed together. The usage in VectorUtils is independent,
but the comment suggests that we should use the same value unless there's a known
reason to diverge. There are similar limits in codegen analysis, but I think we
should leave those independent in case we intentionally want the optimization
power/cost to be different there.
Differential Revision: https://reviews.llvm.org/D86113
If we have a mask, and a value x, where (x & mask) == x, we can drop the AND
and just use x.
This is about a 0.4% geomean code size improvement on CTMark at -O3 for AArch64.
In AArch64, this is most useful post-legalization. Patterns like this often
show up when legalizing s1s, which must be extended to larger types.
e.g.
```
%cmp:_(s32) = G_ICMP ...
%and:_(s32) = G_AND %cmp, 1
```
Since G_ICMP only produces a single bit, there's no reason to mask it with the
G_AND.
Differential Revision: https://reviews.llvm.org/D85463
Intrinsic properties can now be set to default and applied to all
intrinsics. If the attributes are not needed, the user can opt-out by
setting the DisableDefaultAttributes flag to true.
Differential Revision: https://reviews.llvm.org/D70365
In DAGTypeLegalizer::GenWidenVectorLoads the algorithm assumes it only
ever deals with fixed width types, hence the offsets for each individual
store never take 'vscale' into account. I've changed the code in that
function to use TypeSize instead of unsigned for tracking the remaining
load amount. In addition, I've changed the load loop to use the new
IncrementPointer helper function for updating the addresses in each
iteration, since this handles scalable vector types.
Also, I've added report_fatal_errors in GenWidenVectorExtLoads,
TargetLowering::scalarizeVectorLoad and TargetLowering::scalarizeVectorStores,
since these functions currently use a sequence of element-by-element
scalar loads/stores. In a similar vein, I've also added a fatal error
report in FindMemType for the case when we decide to return the element
type for a scalable vector type.
I've added new tests in
CodeGen/AArch64/sve-split-load.ll
CodeGen/AArch64/sve-ld-addressing-mode-reg-imm.ll
for the changes in GenWidenVectorLoads.
Differential Revision: https://reviews.llvm.org/D85909
Summary:
Caught by HWASAN on arm64 Android (which uses ld128 for long double). This
was running the existing fuzzer.
The specific minimized fuzz input to reproduce this is:
__cxa_demangle("1\006ILeeeEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE", 0, 0, 0);
Reviewers: eugenis, srhines, #libc_abi!
Subscribers: kristof.beyls, danielkiss, libcxx-commits
Tags: #libc_abi
Differential Revision: https://reviews.llvm.org/D77924
It's annoying to have to maintain multiple, nearly identical chains of if
statements which all set the same attributes.
Add a helper function, `addFlagsUsingAttrFn` which performs the attribute
setting.
Then, use wrappers for that function in `lowerCall` and `setArgFlags`.
(Note that the flag-setting code in `setArgFlags` was missing the returned
attribute. There's no selection for this yet, so no test. It's an example of
the kind of thing this lets us avoid, though.)
Differential Revision: https://reviews.llvm.org/D86159
Parsing DWARFv5 debug_loclist offsets when a CU is parsed is weighing
down memory usage of symbolizers that don't need to parse this data at
all. There's not much benefit to caching these anyway - since they are
O(1) lookup and reading once you know where the offset list starts (and
can do bounds checking with the offset list size too).
In general, I think it might be time to start paying down some of the
technical debt of loc/loclist/range/rnglist parsing to try to unify it a
bit more.
eg:
* Currently DWARFUnit has: RangeSection, RangeSectionBase, LocSection,
LocSectionBase, LocTable, RngListTable, LoclistTableHeader (be nice if
these were all wrapped up in two variables - one for loclists, one for
rnglists)
* rnglists and loclists are handled differently (see:
LoclistTableHeader, but no RnglistTableHeader)
* maybe all these types could be less stateful - lazily parse what they
need to, even reparsing rather than caching because it doesn't seem
too expensive, for instance. (though admittedly so long as it's
constantcost/overead per compilatiton that's probably adequate)
* Maybe implementing and using a DWARFDataExtractor that can be
sub-ranged (so we could slice it up to just the single contribution) -
though maybe that's not so useful because loc/ranges need to refer to
it by absolute, not contribution-relative mechanisms
Differential Revision: https://reviews.llvm.org/D86110
This is restricted to single use loads, which if we fold to sextloads we can
find more optimal addressing modes on AArch64.
This also fixes an overload the MachineFunction::getMachineMemOperand() method
which was incorrectly using the MF alignment instead of the MMO alignment.
Differential Revision: https://reviews.llvm.org/D85966
By detecting this sign extend pattern early, we can uncover opportunities for
more optimizations.
Differential Revision: https://reviews.llvm.org/D85965
We weren't looking through the parameters on calls at all.
E.g., say you had
```
declare i32 @zext(i32 zeroext %x)
...
%y = call i32 @zext(i32 %something)
...
```
At the point of the call, we wouldn't know that the %something should have the
zeroext attribute.
This sets flags in about the same way as
TargetLoweringBase::ArgListEntry::setAttributes.
Differential Revision: https://reviews.llvm.org/D86125
AMDGPU ISA isn't backwards compatible and hence -mcpu must always be specified during disassembly.
However, the AMDGPU target CPU is stored in e_flags in the ELF object.
This patch allows targets to implement CPU string detection, and also implements it for AMDGPU by looking at e_flags.
Reviewed By: scott.linder
Differential Revision: https://reviews.llvm.org/D84519
This patch introduces a new abstract attribute `AANoUndef` which corresponds to `noundef` IR attribute and deduce them.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D85184
Currently it is hard to avoid having LLVM link to the system install of
ncurses, since it uses check_library_exists to find e.g. libtinfo and
not find_library or find_package.
With this change the ncurses lib is found with find_library, which also
considers CMAKE_PREFIX_PATH. This solves an issue for the spack package
manager, where we want to use the zlib installed by spack, and spack
provides the CMAKE_PREFIX_PATH for it.
This is a similar change as https://reviews.llvm.org/D79219, which just
landed in master.
Differential revision: https://reviews.llvm.org/D85820
This patch implements the vec_extractm function prototypes in altivec.h in
order to utilize the vector extract with mask instructions introduced in Power10.
Differential Revision: https://reviews.llvm.org/D82675
WIP that tries to hide the latency of runtime calls that involve host to
device memory transfers by splitting them into their "issue" and "wait"
versions. The "issue" is moved upwards as much as possible. The "wait" is
moved downards as much as possible. The "issue" issues the memory transfer
asynchronously, returning a handle. The "wait" waits in the returned
handle for the memory transfer to finish. We still lack of the movement.
When diffing disassembly dump of two binaries, I see lots of noises from mismatched jump target addresses and global data references, which unnecessarily causes diffs on every function, making it impractical. I'm trying to symbolize the raw binary addresses to minimize the diff noise.
In this change, a local branch target is modeled as a label and the branch target operand will simply be printed as a label. Local labels are collected by a separate pre-decoding pass beforehand. A global data memory operand will be printed as a global symbol instead of the raw data address. Unfortunately, due to the way the disassembler is set up and to be less intrusive, a global symbol is always printed as the last operand of a memory access instruction. This is less than ideal but is probably acceptable from checking code quality point of view since on most targets an instruction can have at most one memory operand.
So far only the X86 disassemblers are supported.
Test Plan:
llvm-objdump -d --x86-asm-syntax=intel --no-show-raw-insn --no-leading-addr :
```
Disassembly of section .text:
<_start>:
push rax
mov dword ptr [rsp + 4], 0
mov dword ptr [rsp], 0
mov eax, dword ptr [rsp]
cmp eax, dword ptr [rip + 4112] # 202182 <g>
jge 0x20117e <_start+0x25>
call 0x201158 <foo>
inc dword ptr [rsp]
jmp 0x201169 <_start+0x10>
xor eax, eax
pop rcx
ret
```
llvm-objdump -d **--symbolize-operands** --x86-asm-syntax=intel --no-show-raw-insn --no-leading-addr :
```
Disassembly of section .text:
<_start>:
push rax
mov dword ptr [rsp + 4], 0
mov dword ptr [rsp], 0
<L1>:
mov eax, dword ptr [rsp]
cmp eax, dword ptr <g>
jge <L0>
call <foo>
inc dword ptr [rsp]
jmp <L1>
<L0>:
xor eax, eax
pop rcx
ret
```
Note that the jump instructions like `jge 0x20117e <_start+0x25>` without this work is printed as a real target address and an offset from the leading symbol. With a change in the optimizer that adds/deletes an instruction, the address and offset may shift for targets placed after the instruction. This will be a problem when diffing the disassembly from two optimizers where there are unnecessary false positives due to such branch target address changes. With `--symbolize-operand`, a label is printed for a branch target instead to reduce the false positives. Similarly, the disassemble of PC-relative global variable references is also prone to instruction insertion/deletion.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D84191
Some of the lower implementations were relying on this, however the
type was not set depending on which form .lower* helper form you were
using. For instance, if you used an unconditonal lower(), the type was
never set. Most of the lower actions do not benefit from a type
parameter, and just expand in terms of the original operation's types.
However, some lowerings could benefit from an additional type hint to
combine a promotion and an expansion. An example of this is for
add/sub sat. The DAG integer legalization tries to use smarter
expansions directly when promoting the integer type, and doesn't
always produce the same instruction with a wider type.
Treat this as an optional hint argument, that only means something for
specific lower actions. It may be useful to generalize this mechanism
to pass a full list of type indexes and desired types, but I haven't
run into a case like that yet.
SUMMARY:
1. This patch provided API for decoding the traceback table info and unit test for the these API.
2. Another patchs will do the following things:
2.1 added a new option --traceback-table to decode the trace back table information for xcoff object file when
using llvm-objdump to disassemble the xcoff objfile.
2.2 print out the traceback table information for llvm-objdump.
Reviewers: Jason liu, Hubert Tong, James Henderson
Differential Revision: https://reviews.llvm.org/D81585
Use the TableGen directive back-end to generate code for the clauses unparsing.
Reviewed By: sscalpone, kiranchandramohan
Differential Revision: https://reviews.llvm.org/D85851
David Green