The /volatile:ms semantics turn volatile loads and stores into atomic
acquire and release operations. This distinction is important because
volatile memory operations do not form a happens-before relationship
with non-atomic memory. This means that a volatile store is not
sufficient for implementing a mutex unlock routine.
Differential Revision: http://reviews.llvm.org/D7580
llvm-svn: 229082
Somehow a check for aarch64 was added to the Darwin toolchain's
isKernelStatic function as part of the initial commit for Apple's
arm64 target (r205100). That check was not in any of Apple's internal
code and no one here knows where it came from. It has been harmless
because "-static" does not change much, if anything, for arm64 iOS code,
but it makes no sense to keep this check.
llvm-svn: 228673
Summary:
-iframework option is used to specified System framework path so the
path specified should be passed to linker as -F option
rdar://problem/18234544
Reviewers: bob.wilson
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D7106
llvm-svn: 228413
After r228258, Clang started emitting C++ EH IR that LLVM wasn't ready
to deal with, even when exceptions were disabled with /EHs-. This time,
make /EHs- turn off -fexceptions while still emitting exceptional
constructs in functions using __try. Since Sema rejects C++ exception
handling constructs before CodeGen, landingpads should only appear in
such functions as the result of a __try.
llvm-svn: 228329
In r227480, Ulrich Weigand introduced a workaround for a linker
optimization bug that can create mis-optimized code for accesses to
general-dynamic or local-dynamic TLS variables. The linker
optimization bug only occurred for Clang/LLVM because of some
inefficient code being generated for these TLS accesses. I have
recently corrected LLVM to produce the efficient code sequence
expected by the linkers, so this workaround is no longer needed.
Therefore this patch reverts r227480.
I've tested that the previous bootstrap failure no longer occurs with
the workaround reverted.
llvm-svn: 228253
Previously, we would use a frame pointer by default on non-Linux OSs. On
Linux, any optimization flags imply -fomit-frame-pointer. XCore always
defaulted to -fomit-frame-pointer.
Now x86 Windows matches our behavior on Linux. All other ISAs supported
by Windows (ARM, x64) use xdata information, and frame pointers aren't
useful. Frame pointers are now off by default for such targets, but can
be forced via -fno-omit-frame-pointer and code using alloca().
In fact, on Win64 our frame-pointer prologue is not describable with
UNWIND_INFO. This change is a workaround to avoid using the broken FP
using prologue for most functions. This is PR22467.
llvm-svn: 228236
Summary:
Allow user to provide multiple blacklists by passing several
-fsanitize-blacklist= options. These options now don't override
default blacklist from Clang resource directory, which is always
applied (which fixes PR22431).
-fno-sanitize-blacklist option now disables all blacklists that
were specified earlier in the command line (including the default
one).
This change depends on http://reviews.llvm.org/D7367.
Test Plan: regression test suite
Reviewers: timurrrr
Subscribers: cfe-commits, kcc, pcc
Differential Revision: http://reviews.llvm.org/D7368
llvm-svn: 228156
Appends the username to the first component (after the temp dir) of the
module cache path. If the username contains a character that shouldn't
go into a path (for now conservatively allow [a-zA-Z0-9_]), we fallback
to the user id.
llvm-svn: 228013
-save-temps=cwd is equivalent to -save-temps
-save-temps=obj saves temporary file in the same directory as output
This helps to avoid clobbering of temp files in case of parallel
compilation with -save-temps of the files that have the same name
but located in different directories.
Patch by Artem Belevich
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D7304
llvm-svn: 227886
Summary:
The PS4 defaults to -fno-rtti, and has to have rtti enabled when enabling
exceptions.
This commit makes clang add the -fno-rtti by default on the PS4, unless
-frtti was passed in.
It also diagnoses misuses for the PS4:
- Exceptions need rtti. Warn and enable rtti if no rtti flag was passed,
error if -fno-rtti was passed.
I also added a more general warning for when -fno-rtti is the default
(currently it's only on the PS4) and the vptr sanitizer is on.
Fixed a few tests, due to different flag order when passing cc1 arguments.
Reviewers: chandlerc
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D7250
llvm-svn: 227518
Work around a bug in GNU ld (and gold) linker versions up to 2.25
that may mis-optimize code generated by this version of clang/LLVM
to access general-dynamic or local-dynamic TLS variables.
Bug is fixed here:
https://sourceware.org/ml/binutils/2015-01/msg00318.html
llvm-svn: 227480
Those used the old Big Endian support on ARM and don't need flags.
Refactor the logic in a separate common function, which also looks at
-march. Add corresponding logic for the Linux toolchain.
llvm-svn: 227393
Summary:
This was already done for the sanitizers, but it needs to be done for
the profile and builtin libs as well.
Reviewers: srhines, timmurray, eugenis, samsonov
Reviewed By: samsonov
Subscribers: compnerd, cfe-commits
Differential Revision: http://reviews.llvm.org/D7187
llvm-svn: 227392
This patch allows clang to have llvm reserve the x18
platform register on AArch64. FreeBSD will use this in the kernel for
per-cpu data but has no need to reserve this register in userland so
will need this flag to reserve it.
This uses llvm r226664 to allow this register to be reserved.
Patch by Andrew Turner.
llvm-svn: 227062
Summary:
This patch add a new option to dis-allow all inline asm.
Any GCC style inline asm will be reported as an error.
Reviewers: rnk, echristo
Reviewed By: rnk, echristo
Subscribers: bob.wilson, rnk, echristo, rsmith, cfe-commits
Differential Revision: http://reviews.llvm.org/D6870
llvm-svn: 226340
Summary:
This is a more robust way of figuring out implicit deployment target
from isysroot. It also handles iphone simulator target.
Reviewers: bob.wilson, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, cfe-commits
Differential Revision: http://reviews.llvm.org/D6939
llvm-svn: 226005
A pass that adds random noops to X86 binaries to introduce diversity with the goal of increasing security against most return-oriented programming attacks.
Command line options:
-noop-insertion // Enable noop insertion.
-noop-insertion-percentage=X // X% of assembly instructions will have a noop prepended (default: 50%, requires -noop-insertion)
-max-noops-per-instruction=X // Randomly generate X noops per instruction. ie. roll the dice X times with probability set above (default: 1). This doesn't guarantee X noop instructions.
In addition, the following 'quick switch' in clang enables basic diversity using default settings (currently: noop insertion and schedule randomization; it is intended to be extended in the future).
-fdiversify
This is the clang part of the patch.
llvm part: D3392
http://reviews.llvm.org/D3393
Patch by Stephen Crane (@rinon)
llvm-svn: 225910
Introduce the following -fsanitize-recover flags:
- -fsanitize-recover=<list>: Enable recovery for selected checks or
group of checks. It is forbidden to explicitly list unrecoverable
sanitizers here (that is, "address", "unreachable", "return").
- -fno-sanitize-recover=<list>: Disable recovery for selected checks or
group of checks.
- -f(no-)?sanitize-recover is now a synonym for
-f(no-)?sanitize-recover=undefined,integer and will soon be deprecated.
These flags are parsed left to right, and mask of "recoverable"
sanitizer is updated accordingly, much like what we do for -fsanitize= flags.
-fsanitize= and -fsanitize-recover= flag families are independent.
CodeGen change: If there is a single UBSan handler function, responsible
for implementing multiple checks, which have different recoverable setting,
then we emit two handler calls instead of one:
the first one for the set of "unrecoverable" checks, another one - for
set of "recoverable" checks. If all checks implemented by a handler have the
same recoverability setting, then the generated code will be the same.
llvm-svn: 225719
The rewrite map files are not copied, and so cannot be tracked as temporary
files. Add them explicitly to the list of files that we request from the user
to be attached to bug reports.
llvm-svn: 225614
It seemed odd to have to make DefaultImageName be a mutable member of Driver.
We don't need to the full result of computeTargetTriple() to determine the
image name; just base it on DefaultTargetTriple.
llvm-svn: 225530
Allow blessed access to the symbol rewriter from the driver. Although the
symbol rewriter could be invoked through tools like opt and llc, it would not
accessible from the frontend. This allows us to read the rewrite map files in
the frontend rather than the backend and enable symbol rewriting for actually
performing the symbol interpositioning.
llvm-svn: 225504
Summary:
Allow -fsanitize-coverage=N with ubsan, clang part.
This simply allows the flag combination.
The LLVM will work out of the box, the compile-rt part
will follow as a separate patch.
Test Plan: check-clang
Reviewers: samsonov
Reviewed By: samsonov
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D6849
llvm-svn: 225229
It is somewhat common for CFLAGS to be used with .s files. We were
already ignoring -flto. This patch just does the same for -fno-lto.
llvm-svn: 225093
Unfortunately, MSVC does not indicate to the driver what target is being used.
This means that we cannot correctly select the target architecture for the
clang_rt component. This breaks down when targeting windows with the clang
driver as opposed to the clang-cl driver. This should fix the native ARM
buildbot tests.
llvm-svn: 225089
The logic for addSanitizerRTWindows was performing the same logical operation as
getCompilerRT, which was previously fully generalised for Linux and Windows.
This avoids having a duplication of the logic for building up the name of a
clang_rt component. This change does move the current limitation for Windows
into getArchNameForCompilerRTLib, where it is assumed that the architecture for
Windows is always i386.
llvm-svn: 225087
Unify the component handling for compiler-rt. The components are regularly
named, built up from:
${LIBRARY_PREFIX}clang_rt.${component}-${arch}[-${environment}]${LIBRARY_SUFFIX}
Unify the handling for all the various components, into a single path to link
against the various components in a number of places. This reduces duplication
of the clang_rt library name construction logic.
llvm-svn: 225013
Unlike Unices, Windows does not use a library prefix. Use the traditional
naming scheme even for Windows itanium environments. This makes the builtins
behave more like the sanitisers as well.
llvm-svn: 224996
a CLANG_LIBDIR_SUFFIX down from the build system and using that as part
of the default resource dir computation.
Without this, essentially nothing that uses the clang driver works when
building clang with a libdir suffix. This is probably the single biggest
missing piece of support for multilib as without this people could hack
clang to end up installed in the correct location, but it would then
fail to find its own basic resources. I know of at least one distro that
has some variation on this patch to hack around this; hopefully they'll
be able to use the libdir suffix functionality directly as the rest of
these bits land.
This required fixing a copy of the code to compute Clang's resource
directory that is buried inside of the frontend (!!!). It had bitrotted
significantly relative to the driver code. I've made it essentially
a clone of the driver code in order to keep tests (which use cc1
heavily) passing. This copy should probably just be removed and the
frontend taught to always rely on an explicit resource directory from
the driver, but that is a much more invasive change for another day.
I've also updated one test which actually encoded the resource directory
in its checked output to tolerate multilib suffixes.
Note that this relies on a prior LLVM commit to add a stub to the
autoconf build system for this variable.
llvm-svn: 224924
-trigraphs is now an alias for -ftrigraphs. -fno-trigraphs makes it possible
to explicitly disable trigraphs, which couldn't be done before.
clang -std=c++11 -fno-trigraphs
now builds without GNU extensions, but with trigraphs disabled. Previously,
trigraphs were only disabled in GNU modes or with -std=c++1z.
Make the new -f flags the cc1 interface too. This requires changing -trigraphs
to -ftrigraphs in a few cc1 tests.
Related to PR21974.
llvm-svn: 224790
This reapplies r224503 along with a fix for compiling Fortran by having the
clang driver invoke gcc (see r224546, where it was reverted). I have added
a testcase for that as well.
Original commit message:
It is often convenient to use -save-temps to collect the intermediate
results of a compilation, e.g., when triaging a bug report. Besides the
temporary files for preprocessed source and assembly code, this adds the
unoptimized bitcode files as well.
This adds a new BackendJobAction, which is mostly mechanical, to run after
the CompileJobAction. When not using -save-temps, the BackendJobAction is
combined into one job with the CompileJobAction, similar to the way the
integrated assembler is handled. I've implemented this entirely as a
driver change, so under the hood, it is just using -disable-llvm-optzns
to get the unoptimized bitcode.
Based in part on a patch by Steven Wu.
rdar://problem/18909437
llvm-svn: 224688
Summary:
This patch adds "all" sanitizer group. A shortcut "-fno-sanitize=all"
can be used to disable all sanitizers for a given source file.
"-fsanitize=all" option makes no sense, and will produce an error.
This group can also be useful when we add "-fsanitize-recover=<list>"
options (patch in http://reviews.llvm.org/D6302), as it would allow
to conveniently enable/disable recovery for all specified sanitizers.
Test Plan: regression test suite
Reviewers: kcc, rsmith
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D6733
llvm-svn: 224596
This reverts commit r224503.
It broke compilation of fortran through the Clang driver. Previously
`clang -c t.f` would invoke `gcc t.f` and `clang -cc1as`, but now it
tries to call `clang -cc1 t.f` which fails for obvious reasons.
llvm-svn: 224546
It is often convenient to use -save-temps to collect the intermediate
results of a compilation, e.g., when triaging a bug report. Besides the
temporary files for preprocessed source and assembly code, this adds the
unoptimized bitcode files as well.
This adds a new BackendJobAction, which is mostly mechanical, to run after
the CompileJobAction. When not using -save-temps, the BackendJobAction is
combined into one job with the CompileJobAction, similar to the way the
integrated assembler is handled. I've implemented this entirely as a
driver change, so under the hood, it is just using -disable-llvm-optzns
to get the unoptimized bitcode.
Based in part on a patch by Steven Wu.
rdar://problem/18909437
llvm-svn: 224503
Remove Sema::UnqualifiedTyposCorrected, a cache of corrected typos. It would only cache typo corrections that didn't provide ValidateCandidate of which there were few left, and it had a bug when we had the same identifier spelled wrong twice. See the last two tests in typo-correction.cpp for cases this fires.
llvm-svn: 224375
can change the backend to be the same default. Leave the
modified/new testcases with the exception of the default behavior
since it increases our testing footprint.
llvm-svn: 223976
This reverts commit r223455. It's been succesfully argued that
-fexceptions (at the driver level) is a misnomer and has little to do
with -fobjc-exceptions.
llvm-svn: 223723
Clang attempted to replicate a GCC bug: -fobjc-exceptions forces
-fexceptions to be enabled. However, this has unintended effects and
other awkard side effects that Clang doesn't "correctly" ape (e.g. it's
impossible to turn off C++ exceptions in ObjC++ mode).
Instead, -f[no]objc-exceptions and -f[no]cxx-exceptions now have an
identical relationship with -f[no]exceptions.
llvm-svn: 223455
No functionality change is intended, just a cleanup of the logic clang
uses to determine what -fexceptions/-fno-exceptions ends up doing.
llvm-svn: 223453
I added this check a while back but then made a note to myself that it
should be completely unnecessary since iOS always uses PIC code-gen for
aarch64. Since I could never come up with any reason why it would be
necessary, I'm just going to remove it and we'll see if anything breaks.
rdar://problem/13627985
llvm-svn: 223097
Using lld on Windows requires calling link-lld.exe instead of
lld.exe. This patch puts this knowledge into clang so that when
using the GCC style clang driver, it can properly delegate to
lld.
Differential Revision: http://reviews.llvm.org/D6428
Reviewed by: Reid Kleckner, Rui Ueyama
llvm-svn: 223086
Add neon-vfpv3 to allow specifying both at the same time. This is not an
option that GCC supports, but follows the same track and should be
non-controversial.
Change-Id: Id9ec157c835937d7d11ad0f49dbe5171fac17658
llvm-svn: 222933
Revision 220571 removes the requirement to use -pie for tsan binaries. So remove -pie from driver.
Also s/hasZeroBaseShadow/requiresPIE/ because that is what it is used for. Msan does not have zero-based shadow, but requires pie. And in general the relation between zero-based shadow and pie is unclear.
http://reviews.llvm.org/D6318
llvm-svn: 222526
When it's used without an argument, the default file name is
used. The same goes for /Fe.
Also, allow using /Fo, /Fa and /Fe with multiple inputs if they
don't have an argument.
llvm-svn: 222164
In particular, make SanitizerArgs responsible for parsing
and passing down to frontend -fsanitize-recover and
-fsanitize-undefined-trap-on-error flags.
Simplify parsing -f(no-)sanitize= flags parsing: get rid of
too complex filterUnsupportedKinds function.
No functionality change.
llvm-svn: 222105
Remove flag parsing details from the public header.
Use SanitizerSet to represent the set of enabled sanitizers.
Cleanup the implementation: update the comments to
reflect reality, remove dead code.
No functionality change.
llvm-svn: 221968
This option was misleading because it looked like it enabled the
language feature of SEH (__try / __except), when this option was really
controlling which EH personality function to use. Mingw only supports
SEH and SjLj EH on x86_64, so we can simply do away with this flag.
llvm-svn: 221963
This change removes libclang_rt.profile-pic-<arch>.a version of
profile runtime. Instead, it's sufficient to always build
libclang_rt.profile-<arch>.a with -fPIC, as it can be linked into
both executables and shared objects.
llvm-svn: 221952
Summary:
This change makes the asan-coverge (formerly -mllvm -asan-coverge)
accessible via a clang flag.
Companion patch to LLVM is http://reviews.llvm.org/D6152
Test Plan: regression tests, chromium
Reviewers: samsonov
Reviewed By: samsonov
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D6153
llvm-svn: 221719
Darwin's "-arch arm64" option implies full Cyclone CPU, for both architectural
and tuning purposes. So if neither of the explicit options have been given,
forward that on to the proper invocation.
rdar://problem/18906227
llvm-svn: 221631
If clang was configured with a custom gcc toolchain (either by using GCC_INSTALL_PREFIX in cmake or the equivalent configure command), the path to the custom gcc toolchain path takes precedence to the one specified by -ccc-install-dir. This causes several regression tests to fail as they will be using an unexpected path. Adding the switch --gcc-toolchain="" in each test command is not enough as the hexagon toolchain implementation in the driver is not evaluating this argument. This commit modifies the hexagon toolchain to take the --gcc-toolchain="" argument into account when deciding the toolchain path, similarly to what is already done for other targets toolchains. Additionally, the faulty regression tests are modified in order to --gcc-toolchain="" be passed to the commands.
llvm-svn: 221535
This CPU definition is redundant. The Cortex-A9 is defined as
supporting multiprocessing extensions. Remove references to this CPU.
This CPU was recently removed from LLVM. See http://reviews.llvm.org/D6057
Change-Id: I62ae7cc656fcae54fbaefc4b6976e77e694a8678
llvm-svn: 221458
The command line options are specified in a space-separated list that is an
argument to -dwarf-debug-flags, so that breaks if there are spaces in the
options. This feature came from Apple's internal version of GCC, so I went back
to check how llvm-gcc handled this and matched that behavior.
rdar://problem/18775420
llvm-svn: 221309
Change the LC_ID_DYLIB of ASan's dynamic libraries on OS X to be set to "@rpath/libclang_rt.asan_osx_dynamic.dylib" and similarly for iossim. Clang driver then sets the "-rpath" to be the real path to where clang currently has the dylib (because clang uses the relative path to its current executable). This means if you move the compiler or install the binary release, -fsanitize=address will link to the proper library.
Reviewed at http://reviews.llvm.org/D6018
llvm-svn: 221279
The former name doesn't make sense, we are using this parameter for both .a and .dylib libraries.
No functional change.
http://reviews.llvm.org/D6040
llvm-svn: 220939
Rather than asserting that the target is unsupported, make a guess at what the
tree for a port would look like and use that for the search path.
Addresses review comments from Ried Kleckner for SVN r220547.
llvm-svn: 220624
'char' is unsigned on all ARM and Thumb architectures. Clang gets this
right for ARM, and for thumb when using and arm triple and the -mthumb
option, but gets it wrong for thumb triples. This fixes that.
llvm-svn: 220555
This is a very basic toolchain. It supports cross-compiling Windows (primarily
inspired by the WoA target). It is meant to use clang with the LLVM IAS and a
binutils ld-compatible interface for the linker (eventually to be lld). It does
not perform any "standard" GCC lookup, nor does it perform any special
adjustments given that it is expected to be used in an environment where the
user is using MSVCRT (and as such Visual Studio headers) and the Windows SDK.
The primary runtime library is expected to be compiler-rt and the C++
implementation to be libc++.
It also expects that a sysroot has been setup given the usual Unix semantics
(standard C headers in /usr/include, all the import libraries available in
/usr/lib). It also expects that an entry point stub is present in /usr/lib
(crtbegin.obj for executables, crtbeginS.obj for shared libraries).
The entry point stub is responsible for running any GNU constructors.
llvm-svn: 220546
This is a sad thing to do, but all the alternatives look ugly.
Looks like there are legitimate cases when users may want to link
with sanitizer runtimes *and* -nodefaultlibs (and ensure they provide
replacements for system libraries). For example, this happens in libc++
test suite.
"-nodefaultlibs" is told to link only the libraries explicitly provided
by the user, and providing "-fsanitize=address" is a clear indication of
intention to link with ASan runtime.
We can't easily introduce analogue of "-print-libgcc-name": linking with
sanitizers runtimes is not trivial: some runtimes are split into several
archive libraries, which are required to be wrapped in
-whole-archive/-no-whole-archive.
If "-fsanitize=whatever" and "-nodefaultlibs" are provided, system library
dependencies of sanitizer runtimes (-lc/-ldl/-lpthread/-lrt) will *not* be
linked, and user would have to link them in manually. Note that this can
cause problems, as failing to provide "-lrt" might lead to crashes in runtime
during ASan initialization. But looks like we should bite this bullet.
See r218541 review thread for the discussion.
llvm-svn: 220455
When a user has not configured a standard Visual Studio environment
by running vcvarsall, clang tries its best to find Visual Studio
include files and executables anyway. This patch makes clang also
try to find system and Windows SDK libraries for linking against,
as well.
Reviewed by: Hans Wennborg
Differential Revision: http://reviews.llvm.org/D5873
llvm-svn: 220425
This resubmits change r220226. That change broke the chromium
build bots because chromium it ships an hermetic MSVC toolchain
that it expects clang to fallback to by finding it on the path.
This patch fixes the issue by bumping up the prioritization of PATH
when looking for MSVC binaries.
Reviewed by: Hans Wennborg, Reid Kleckner
Differential Revision: http://reviews.llvm.org/D5892
llvm-svn: 220424
This renames the Windows toolchain to MSVCToolChain. This is a preparatory step
for adding a CrossWindowsToolChain which uses clang/libc++/(ld/lld) without the
standard GCC toolchain lookup. NFC.
llvm-svn: 220362
Implicit module builds are not well-suited to a lot of build systems. In
particular, they fare badly in distributed build systems, and they lead to
build artifacts that are not tracked as part of the usual dependency management
process. This change allows explicitly-built module files (which are already
supported through the -emit-module flag) to be explicitly loaded into a build,
allowing build systems to opt to manage module builds and dependencies
themselves.
This is only the first step in supporting such configurations, and it should
be considered experimental and subject to change or removal for now.
llvm-svn: 220359
-g1 on gcc (and also IBM's xlc) are documented to be very similar to
-gline-tables-only. Our -gline-tables-only might still be more verbose than -g1
on other compilers, but currently we treat -g1 as -g, and so we're producing
much more debug info at -g1 than everybody else. Treating -g1 as
-gline-tables-only brings us much closer to what everyone else is doing.
For more information, see the discussion on
http://lists.cs.uiuc.edu/pipermail/cfe-dev/2014-October/039649.html
llvm-svn: 220311
This fixes crash report generation when filenames have spaces. It also
removes an awkward workaround that quoted *some* arguments when
generating crash reports.
llvm-svn: 220307
This pushes the logic for generating a crash reproduction script
entirely into Command::Print, instead of Command doing half of the
work and then relying on textual substitution for the rest. This makes
this logic much easier to read and will simplify fixing a couple of
issues in this area.
llvm-svn: 220305
In environments where PATH was set to point to the VS installation, Clang would
override that by looking in the registry and finding the latest VS installation.
If the environment is set up to point to a VS installation, that should take
precedence.
Reverting this until we can fix it.
llvm-svn: 220243
List the module cache we use for crashdumps as a tempfile. This
simplifies how we pick up this directory when generating the actual
crash diagnostic and removes some duplicate logic.
llvm-svn: 220241
In practice there's only ever one temporary output file when
generating a crashdump, but even if there were many iterating over
each and creating a duplicate run script for each one wouldn't make
very much sense.
This updates the behaviour to only generate the script once, based on
the first filename.
This should make it more reasonable to generate extra output files to
include in the crashdump going forward, so I've also added a FIXME to
look into doing just that with the extra module crashdump files.
llvm-svn: 220238
We currently use a null FailingCommand when generating crash reports
as an indication that the cause is FORCE_CLANG_DIAGNOSTICS_CRASH, the
environment variable that exists to test crash dumps. This means that
our tests don't actually cover real crashes at all, and adds a more
complicated code path that's only used in the tests.
Instead, we can have the driver synthesize that every command failed
and just call generateCompilationDiagnostics normally.
llvm-svn: 220234
Typically clang finds Visual Studio by the user explicitly setting
up a Visual Studio environment via vcvarsall. But we still try to
behave intelligently and fallback to different methods of finding
Visual Studio when this is not done. This patch improves various
fallback codepaths to make Visual Studio locating more robust.
Specifically, this patch:
* Adds support for searching environment variables for VS 12.0
* Correctly locates include folders for Windows SDK 8.x (this was
previously broken, and would cause clang to error)
* Prefers locating link.exe in the same location as cl.exe. This
is helpful in case another link.exe is in the path earlier than
Visual Studio (e.g. GnuWin32)
* Minor cleanup in the registry reading code to make it more
robust in the presence of long pathnames.
llvm-svn: 220226
Summary:
AddressSanitizer currently doesn't support this configuration, and binaries
built with it will just get into an infinite loop during startup.
Test Plan: Includes an automated test.
Reviewers: samsonov
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D5764
llvm-svn: 219744
Some early revisions of the Cortex-A53 have an erratum (835769) whereby it is
possible for a 64-bit multiply-accumulate instruction in AArch64 state to
generate an incorrect result. The details are quite complex and hard to
determine statically, since branches in the code may exist in some
circumstances, but all cases end with a memory (load, store, or prefetch)
instruction followed immediately by the multiply-accumulate operation.
The safest work-around for this issue is to make the compiler avoid emitting
multiply-accumulate instructions immediately after memory instructions and the
simplest way to do this is to insert a NOP.
This patch implements clang options to enable this workaround in the backend.
The work-around code generation is not enabled by default.
llvm-svn: 219604
We can safely rely on the architecture to distinguish iOS device builds from
iOS simulator builds. We already have code to do that, in fact. This simplifies
some of the error checking for the option handling.
llvm-svn: 219545
This was previously only used when explicitly requested with a command line
option because it had to work with some old versions of the linker when it
was first introduced. That is ancient history now, and it should be safe to
use the correct option even when using the IPHONEOS_DEPLOYMENT_TARGET
environment variable to specify that the target is the iOS simulator.
Besides updating the test for this, I also added a few more tests for the
iOS linker options.
llvm-svn: 219527
It turns out that this was never used. Instead we just use the
IPHONEOS_DEPLOYMENT_TARGET variable for both iOS devices and simulator.
rdar://problem/18596744
llvm-svn: 219467
Looks like llvm::sys::path::filename() was canonicalizing my paths
before emitting them for FileCheck to stumble over.
Fix a style nit with r219460 while I'm at it.
llvm-svn: 219464
When building with coverage, -no-integrated-as, and -c, the driver was
emitting -cc1 -coverage-file pointing at a file in /tmp. Ensure the
coverage file is emitted in the same directory as the output file.
llvm-svn: 219460
Summary:
This change adds an experimental flag -fsanitize-address-field-padding=N (0, 1, 2)
to clang and driver. With this flag ASAN will be able to detect some cases of
intra-object-overflow bugs,
see https://code.google.com/p/address-sanitizer/wiki/IntraObjectOverflow
There is no actual functionality here yet, just the flag parsing.
The functionality is being reviewed at http://reviews.llvm.org/D5687
Test Plan: Build and run SPEC, LLVM Bootstrap, Chrome with this flag.
Reviewers: samsonov
Reviewed By: samsonov
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D5676
llvm-svn: 219417
Summary: The changes introduced in the above two commits are giving
a rough time to one of the build bots. Reverting the changes for the
moment so that the bot can go green again.
Change-Id: Id19f6cb2a8bc292631fac2262268927563d820c2
llvm-svn: 218970
There's probably never a good reason to iterate over unique_ptrs. This
lets us use range-for and say Job.foo instead of (*it)->foo in a few
places.
llvm-svn: 218938
The Cortex-M7 has 3 options for its FPU: none, FPv5-SP-D16 and
FPv5-DP-D16. FPv5 has the same instructions as FP-ARMv8, so it can be
modeled using the same target feature, and all double-precision
operations are already disabled by the fp-only-sp target features.
llvm-svn: 218748
being on by default. -fno-cxx-modules can still be used to enable C modules but
not C++ modules, but C++ modules is not significantly less stable than C
modules any more.
Also remove some of the scare words from the modules documentation. We're
certainly not going to remove modules support (though we might change the
interface), and it works well enough to bootstrap and build lots of
non-trivial code.
Note that this does not represent a commitment to the current interface nor
implementation, and we still intend to follow whatever direction the C and C++
committees take regarding modules support.
llvm-svn: 218717
It makes no sense to link in sanitizer runtimes in this case: the user
probably doesn't want to see any system/toolchain libs in his link if he
provides these flags, and the link will most likely fail anyway - as sanitizer
runtimes depend on libpthread, libdl, libc etc.
Also, see discussion in https://code.google.com/p/address-sanitizer/issues/detail?id=344
llvm-svn: 218541
Translate -lfoo to -lfoo.lib while making sure that -lfoo.lib stays as
-lfoo.lib. Also, these arguments were being passed twice: once
explicitly via AddAllArgs, and again implicitly as linker inputs. Now
they are passed once.
Fixes PR20868.
llvm-svn: 217895
Change 1: we used to add static sanitizer runtimes at the
very beginning of the linker invocation, even before crtbegin.o, which
is gross and not correct in general. Fix this: now addSanitizerRuntimes()
adds all sanitizer-related link flags to the end of the linker invocation
being constructed. It means, that we should call this function in the
correct place, namely, before AddLinkerInputs() to make sure sanitizer
versions of library functions will be preferred.
Change 2: Put system libraries sanitizer libraries depend on at the
end of the linker invocation, where all the rest system libraries are
located. Respect --nodefaultlibs and --nostdlib flags. This is another way
to fix PR15823. Original fix landed in r215940 put "-lpthread" and friends
immediately after static ASan runtime, before the user linker inputs.
This caused significant slowdown in dynamic linker for large binaries
linked against thousands of shared objects. Instead, to mark system
libraries as DT_NEEDED we prepend them with "--no-as-needed" flag,
discarding the "-Wl,--as-needed" flag that could be provided by the user.
Otherwise, this change is a code cleanup. Instead of having a special method
for each sanitizer, we introduce a function collectSanitizerRuntimes() that
analyzes -fsanitize= flags and returns the set of static and shared
libraries that needs to be linked.
llvm-svn: 217817
Patch by Rafael Auler!
This patch addresses PR15171 and teaches Clang how to call other tools
with response files, when the command line exceeds system limits. This
is a problem for Windows systems, whose maximum command-line length is
32kb.
I introduce the concept of "response file support" for each Tool object.
A given Tool may have full support for response files (e.g. MSVC's
link.exe) or only support file names inside response files, but no flags
(e.g. Apple's ld64, as commented in PR15171), or no support at all (the
default case). Therefore, if you implement a toolchain in the clang
driver and you want clang to be able to use response files in your
tools, you must override a method (getReponseFileSupport()) to tell so.
I designed it to support different kinds of tools and
internationalisation needs:
- VS response files ( UTF-16 )
- GNU tools ( uses system's current code page, windows' legacy intl.
support, with escaped backslashes. On unix, fallback to UTF-8 )
- Clang itself ( UTF-16 on windows, UTF-8 on unix )
- ld64 response files ( only a limited file list, UTF-8 on unix )
With this design, I was able to test input file names with spaces and
international characters for Windows. When the linker input is large
enough, it creates a response file with the correct encoding. On a Mac,
to test ld64, I temporarily changed Clang's behavior to always use
response files regardless of the command size limit (avoiding using huge
command line inputs). I tested clang with the LLVM test suite (compiling
benchmarks) and it did fine.
Test Plan: A LIT test that tests proper response files support. This is
tricky, since, for Unix systems, we need a 2MB response file, otherwise
Clang will simply use regular arguments instead of a response file. To
do this, my LIT test generate the file on the fly by cloning many -DTEST
parameters until we have a 2MB file. I found out that processing 2MB of
arguments is pretty slow, it takes 1 minute using my notebook in a debug
build, or 10s in a Release build. Therefore, I also added "REQUIRES:
long_tests", so it will only run when the user wants to run long tests.
In the full discussion in
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20130408/171463.html,
Rafael Espindola discusses a proper way to test
llvm::sys::argumentsFitWithinSystemLimits(), and, there, Chandler
suggests to use 10 times the current system limit (20MB resp file), so
we guarantee that the system will always use response file, even if a
new linux comes up that can handle a few more bytes of arguments.
However, by testing with a 20MB resp file, the test takes long 8 minutes
just to perform a silly check to see if the driver will use a response
file. I found it to be unreasonable. Thus, I discarded this approach and
uses a 2MB response file, which should be enough.
Reviewers: asl, rafael, silvas
Reviewed By: silvas
Subscribers: silvas, rnk, thakis, cfe-commits
Differential Revision: http://reviews.llvm.org/D4897
llvm-svn: 217792
This adds a flag called -fseh-exceptions that uses the native Windows
.pdata and .xdata unwind mechanism to throw exceptions. The other EH
possibilities are DWARF and SJLJ exceptions.
Patch by Martell Malone!
Reviewed By: asl, rnk
Differential Revision: http://reviews.llvm.org/D3419
llvm-svn: 217790
Test Plan: The patch includes a test case.
Reviewers: hansw
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D5338
llvm-svn: 217710
It turned out that we have to bridge more stuff between the executable
and the ASan RTL DLL than just __asan_option_detect_stack_use_after_return.
See PR20918 for more details.
llvm-svn: 217673
Summary:
cl.exe recognizes /o as a deprecated and undocumented option similar to
/Fe. This patch adds support for this option to clang-cl for /Fe, /Fo
and /Fi. It also ensures that the last option among /o and /F* wins,
if both specified.
This is required at least for building autoconf based software, since
autoconf uses -o to specify the executable output.
This fixes http://llvm.org/PR20894.
Test Plan: The patch includes automated tests.
Reviewers: rnk
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D5308
llvm-svn: 217615
actually different. Fixes a surprising link error with nodejs on rpi,
where armv6-netbsd-eabihf turned into armv5e-netbsd-eabihf, which
doesn't lacks the necessary VFP support.
llvm-svn: 217546
Summary:
Currently, this is done implicitly in Driver::BuildInputs by considering
any invalid input type as linker input.
Test Plan: I don't think this behavior is observable for the reason stated above.
Reviewers: hansw
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D5294
llvm-svn: 217522
r216662 changed the default ABI for 32-bit ARM targets to be "aapcs"
when no environment is given in the triple, however NetBSD requires it
to be "apcs-gnu".
llvm-svn: 217141
It hits a limit when we reach ActionList, which is used for dynamic
conditional ownership, so we lose type safety there.
This did expose at least one caller "lying" about ownership (passing
ownership to an Action, then updating the Action to specify that it
doesn't actually own the thing that was passed) - changing this to
unique_ptr just makes that oddity more obvious.
llvm-svn: 216713
With this patch we call external tools for powerpc-darwin with "-arch ppc"
instead of "-arch powerpc", so as to be compatible with the cctools assembler
and ld64 linker.
Patch by Stephen Drake!
llvm-svn: 216687
The current default abi when no environment is given is "apcs-gnu",
which is obsolete. This patch changes the default to "aapcs". "aapcs" has both
hard- and soft-float variants, so the -mhard-float, -msoft-float and
-mfloat-abi= options now all behave as expected when no environment is
specified in the triple.
While writing this I also noticed that a preprocessor test claims to be
checking darwin, but is actually checking the defaults, which are
different for darwin.
llvm-svn: 216662
ACLE 2.0 allows __fp16 to be used as a function argument or return
type. This enables this for AArch64.
This also fixes an existing bug that causes clang to not allow
homogeneous floating-point aggregates with a base type of __fp16. This
is valid for AAPCS64, but not for AAPCS-VFP.
llvm-svn: 216558
There is no reason to have different library names for shared and static
cases on linux. It also breaks Android where we install the shared asan-rt
library into the system and should keep the old name.
This change reverts most of r216380 limiting it to win32 targets only.
llvm-svn: 216533
modern Debian-based distributions) due to on-going multiarch madness.
It appears that when the multiarch heeader search support went into the
clang driver, it went in in a quite bad state. The order of includes
completely failed to match the order exhibited by GCC, and in a specific
case -- when the GCC triple and the multiarch triple don't match as with
i686-linux-gnu and i386-linux-gnu -- we would absolutely fail to find
the libstdc++ target-specific header files.
I assume that folks who have been using Clang on Ubuntu 32-bit systems
have been applying weird patches to hack around this. I can't imagine
how else it could have worked. This was originally reported by a 64-bit
operating system user who had a 32-bit crosscompiler installed. We tried
to use that rather than the bi-arch support of the 64-bit compiler, but
failed due to the triple differences.
I've corrected all the wrong orderings in the existing tests and added
a specific test for the multiarch triple strings that are different in
a significant way. This should significantly improve the usability of
Clang when checked out vanilla from upstream onto Ubuntu machines with
an i686 GCC installation for whatever reason.
llvm-svn: 216531
With this patch, "check-asan" passes all the tests with both MT and MD ASan RTL if you set COMPILER_RT_BUILD_SHARED_ASAN to ON
(PR20214)
llvm-svn: 216447
This patch aims at fixing PR17239.
This bug happens because the /link (clang-cl.exe argument) is marked as
"consume all remaining arguments". However, when inside a response file,
/link should only consume all remaining arguments inside the response
file where it is located, not the entire command line after expansion.
The LLVM side of the patch will change the semantics of the
RemainingArgsClass kind to always consume only until the end of the
response file when the option originally came from a response file.
There are only two options in this class: dash dash (--) and /link.
This is the Clang side of the patch in http://reviews.llvm.org/D4899
Reviewered By: rafael, rnk
Differential Revision: http://reviews.llvm.org/D4900
Patch by Rafael Auler!
llvm-svn: 216281
1. Always put static sanitizer runtimes to the front of the linker
invocation line. This was already done for all sanitizers except UBSan:
in case user provides static libstdc++ we need to make sure that new/delete
operator definitions are picked from sanitizer runtimes instead of libstdc++.
We have to put UBSan runtime first for similar reasons: it depends on some
libstdc++ parts (e.g. __dynamic_cast function), and has to go first in
link line to ensure these functions will be picked up from libstdc++.
2. Put sanitizer libraries system dependencies (-ldl, -lpthread etc.) right
after sanitizer runtimes. This will ensure these libraries participate in
the link even if user provided -Wl,-as-needed flag. This should fix PR15823.
3. In case we link in several sanitizer runtimes (e.g. "ubsan", "ubsan_cxx"
and "san"), add system dependencies (-ldl, -lpthread, ...) only once.
llvm-svn: 215940
Summary:
Adding remaining 2 cases handling:
* from x32 to 32 via -m32
* from x32 to 64 via -m64
Test Plan: linux-ld test updated
Reviewers: chandlerc, atanasyan
Subscribers: cfe-commits, zinovy.nis
Differential Revision: http://reviews.llvm.org/D4930
llvm-svn: 215899
of MIPS toolchains.
The uCLibc implemented for multiple architectures. A couple of MIPS toolchains
contains both uCLibc and glibc implementation so these options allow to select
used C library.
Initially -muclibc / -mglibc (as well as -mbionic) have been implemented in gcc
for various architectures so they are not MIPS specific.
llvm-svn: 215552
Rather than silently disabling unaligned accesses for v6m targets as
in the previous patch to llvm, instead produce a warning saying that
this architecture doesn't support unaligned accesses.
Patch by Ben Foster
llvm-svn: 215531
Summary:
Just like with -finput-charset=UTF-8 in review http://reviews.llvm.org/D4347, I think we should just ignore it when UTF-8 is provided.
Reviewers: rnk, rafael
Reviewed By: rafael
Subscribers: rafael, cfe-commits
Differential Revision: http://reviews.llvm.org/D4841
llvm-svn: 215368
Summary:
This flag can be used to force linking of CXX-specific parts
of sanitizer runtimes into the final executable. It gives more precise
control than --driver-mode=g++ and comes handy when user links several
object files with sanitized C++ code into an executable, but wants
to provide libstdc++ himself, instead of relying on Clang dirver's
behavior.
Test Plan: clang regression test suite
Reviewers: chandlerc, rsmith
Reviewed By: rsmith
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D4824
llvm-svn: 215252
It wasn't actually a bug that -mabicalls/-mno-abicalls wasn't being passed to
GAS. The only reason we pass it to the integrated assembler is because it shares
the same framework with CodeGen.
llvm-svn: 215236
Also added the testcase that should have been in r215194.
This behaviour has surprised me a few times now. The problem is that the
generated MipsSubtarget::ParseSubtargetFeatures() contains code like this:
if ((Bits & Mips::FeatureABICalls) != 0) IsABICalls = true;
so '-abicalls' means 'leave it at the default' and '+abicalls' means 'set it to
true'. In this case, (and the similar -modd-spreg case) I'd like the code to be
IsABICalls = (Bits & Mips::FeatureABICalls) != 0;
or possibly:
if ((Bits & Mips::FeatureABICalls) != 0)
IsABICalls = true;
else
IsABICalls = false;
and preferably arrange for 'Bits & Mips::FeatureABICalls' to be true by default
(on some triples).
llvm-svn: 215211
intent when we added remark support, but was never implemented in the general
case, because the first -R flags didn't need it. (-Rpass= had special handling
to accomodate its argument.)
-Rno-foo, -Reverything, and -Rno-everything can be used to turn off a remark,
or to turn on or off all remarks. Per discussion on cfe-commits, -Weverything
does not affect remarks, and -Reverything does not affect warnings or errors.
The only "real" -R flag we have right now is -Rmodule-build; that flag is
effectively renamed from -Wmodule-build to -Rmodule-build by this change.
-Wpass and -Wno-pass (and their friends) are also renamed to -Rpass and
-Rno-pass by this change; it's not completely clear whether we intended to have
a -Rpass (with no =pattern), but that is unchanged by this commit, other than
the flag name. The default pattern is effectively one which matches no passes.
In future, we may want to make the default pattern be .*, so that -Reverything
works for -Rpass properly.
llvm-svn: 215046
from the common driver code to the corresponding `MultilibSet` declarations.
Now the `MultilibSet` can hold an optional callback function which is
responsible to return a set of include directories specific for the toolchain.
That allows to remove MIPS toolchain specific directories from
`Linux::AddClangSystemIncludeArgs` method and simplify adding new directories
in the future.
llvm-svn: 214949
This escapes any backslashes in the executable path and fixes an issue
with a trailing quote when the main file name had to be quoted during
printing.
It's impossible to test this without putting backslashes or quotes into
the executable path, so I didn't add automated tests.
The crash diagnostics are still only useful if you're using bash on
Windows, though. This should probably be writing a batch file instead.
llvm-svn: 214924
to instruct the code generator to not enforce a higher alignment
than the given number (of bytes) when accessing memory via an opaque
pointer or reference. Patch reviewed by John McCall (with post-commit
review pending). rdar://16254558
llvm-svn: 214911
This patch adds the '-fcoverage-mapping' option which
allows clang to generate the coverage mapping information
that can be used to provide code coverage analysis using
the execution counts obtained from the instrumentation
based profiling (-fprofile-instr-generate).
llvm-svn: 214752
That reduces a number of `if` operators and prevent a combinatorics explosion
if/when more dynamic linker path variants added.
No functional changes.
llvm-svn: 214712
Build systems tend to traffic in files and modification times, so having
them touch a file at the beginning of the build can be easier than
having them update the compile command they use every time they build.
llvm-svn: 214577
Summary:
There are no tests as it is dependant upon the environment variables
XCC_C_INCLUDE_PATH & XCC_CPLUS_INCLUDE_PATH being set.
Differential Revision: http://reviews.llvm.org/D4621
llvm-svn: 214510
r197490 changed the behavior of LIBRARY_PATH to try to match GCC's behavior
for cross compilers and make clang work better on "bare metal" targets.
Unfortunately that change is breaking a number of MacPorts projects because
the LIBRARY_PATH environment variable is being ignored when compiling on a
64-bit host for a 32-bit target. Because the host and target architectures
differ, isCrossCompiling returns true. This does not make sense for Darwin,
where multiple architectures are supported natively via "fat" Mach-O slices
and where development is generally done against SDKs regardless. This patch
fixes the problem by overriding isCrossCompiling to return false for Darwin
toolchains.
llvm-svn: 214208
The -mstrict-align option was originally added in r167619 as a target-
independent option. It was then changed in r167623 to be implemented with an
ARM-specific backend option, even though the code remained in the
target-independent Clang::ConstructJob function. This means that if you used
the -mstrict-align option with a non-ARM target, you would still get the
-arm-strict-align option getting passed to the backend, which was harmless
but gross. The driver option was then replaced by the GCC-compatible
-m[no-]unaligned-access option (r189175) and modified to work with AArch64
(r208075). However, in the process, the help text for -mstrict-align was
incorrectly changed to show it as only being supported for AArch64. Even worse,
the logic for handling these options together with -mkernel was wrong for
AArch64, where -mkernel does not currently imply strict alignment.
This patch fixes up all of those things. Besides the obvious change to the
option help text, it moves the logic into the ARM and AArch64-specific parts
of the driver, so that the option will be correctly ignored for non-ARM
targets. <rdar://problem/17823697>
llvm-svn: 214148
While Clang now supports both ELFv1 and ELFv2 ABIs, their use is currently
hard-coded via the target triple: powerpc64-linux is always ELFv1, while
powerpc64le-linux is always ELFv2.
These are of course the most common scenarios, but in principle it is
possible to support the ELFv2 ABI on big-endian or the ELFv1 ABI on
little-endian systems (and GCC does support that), and there are some
special use cases for that (e.g. certain Linux kernel versions could
only be built using ELFv1 on LE).
This patch implements the Clang side of supporting this, based on the
LLVM commit 214072. The command line options -mabi=elfv1 or -mabi=elfv2
select the desired ABI if present. (If not, Clang uses the same default
rules as now.)
Specifically, the patch implements the following changes based on the
presence of the -mabi= option:
In the driver:
- Pass the appropiate -target-abi flag to the back-end
- Select the correct dynamic loader version (/lib64/ld64.so.[12])
In the preprocessor:
- Define _CALL_ELF to the appropriate value (1 or 2)
In the compiler back-end:
- Select the correct ABI in TargetInfo.cpp
- Select the desired ABI for LLVM via feature (elfv1/elfv2)
llvm-svn: 214074
Current versions of ld64 can't cope with "aarch64" being stored. I'm fixing
that, but in the transitionary period we'll need to still emit "arm64".
rdar://problem/17783765
llvm-svn: 213852
The main subtlety here is that the Darwin tools still need to be given "-arch
arm64" rather than "-arch aarch64". Fortunately this already goes via a custom
function to handle weird edge-cases in other architectures, and it tested.
I removed a few arm64_be tests because that really isn't an interesting thing
to worry about. No-one using big-endian is also referring to the target as
arm64 (at least as far as toolchains go). Mostly they date from when arm64 was
a separate target and we *did* need a parallel name simply to test it at all.
Now aarch64_be is sufficient.
llvm-svn: 213744
Both /showIncludes and /E write to stdout. Allowing both results
in interleaved output and an error when double-closing the file
descriptor, intended to catch issues like this.
llvm-svn: 213589
1. Revert "Add default feature for CPUs on AArch64 target in Clang"
at r210625. Then, all enabled feature will by passed explicitly by
-target-feature in -cc1 option.
2. Get "-mfpu" deprecated.
3. Implement support of "-march". Usage is:
-march=armv8-a+[no]feature
For instance, "-march=armv8-a+neon+crc+nocrypto". Here "armv8-a" is
necessary, and CPU names are not acceptable. Candidate features are
fp, neon, crc and crypto. Where conflicting feature modifiers are
specified, the right-most feature is used.
4. Implement support of "-mtune". Usage is:
-march=CPU_NAME
For instance, "-march=cortex-a57". This option will ONLY get
micro-architectural feature enabled specifying to target CPU,
like "+zcm" and "+zcz" for cyclone. Any architectural features
WON'T be modified.
5. Change usage of "-mcpu" to "-mcpu=CPU_NAME+[no]feature", which is
an alias to "-march={feature of CPU_NAME}+[no]feature" and
"-mtune=CPU_NAME" together. Where this option is used in conjunction
with -march or -mtune, those options take precedence over the
appropriate part of this option.
llvm-svn: 213353
Summary:
With this patch (and a corresponding LLVM patch), assembling an empty file with
GCC and Clang -fintegrated-as produce near identical objects. The remaining
differences are:
* GCC/GAS produce objects have a .pdr section
* GCC/GAS produce objects have a .gnu.attributes section
Other differences are insignificant such as precise file offsets and the order
of strings in the string table.
Differential Revision: http://reviews.llvm.org/D4531
llvm-svn: 213241
however certain sloppy Makefiles pass -z options directly to
the compiler. This patch enables clang to recognize these
options (because -z is not used by clang itself).
llvm-svn: 213198
Summary:
As a result of this patch, assembling an empty file with GCC and Clang (using
GAS as the assembler) now produces identical objects.
-mfp32/-mfpxx/-mfp64 now form a trinity of options. -mfpxx is the default
when the triple vendor is 'img' or 'mti', the ABI is O32, and the CPU is
between mips2 and mips32r2/mips64r2 (inclusive).
-mno-shared is always given to the assembler to match the effect of
-mabicalls (currently unimplemented but Clang acts as if it is given).
Similarly, -call_nonpic is always given to match the effect of -mplt (also
unimplemented and acts as if given) except when the ABI is 64 in which case
-mplt has no effect so -KPIC is given instead.
-mhard-float/-msoft-float are now passed on.
-modd-spreg/-mno-odd-spreg are now passed on.
-mno-mips16 is correctly passed on. The assembler option is -no-mips16 not
-mno-mips16
Differential Revision: http://reviews.llvm.org/D4515
llvm-svn: 213138
Nico Weber