Precursor: https://reviews.llvm.org/D110200
Removed redundant ops from the standard dialect that were moved to the
`arith` or `math` dialects.
Renamed all instances of operations in the codebase and in tests.
Reviewed By: rriddle, jpienaar
Differential Revision: https://reviews.llvm.org/D110797
Conversion to the LLVM dialect is being refactored to be more progressive and
is now performed as a series of independent passes converting different
dialects. These passes may produce `unrealized_conversion_cast` operations that
represent pending conversions between built-in and LLVM dialect types.
Historically, a more monolithic Standard-to-LLVM conversion pass did not need
these casts as all operations were converted in one shot. Previous refactorings
have led to the requirement of running the Standard-to-LLVM conversion pass to
clean up `unrealized_conversion_cast`s even though the IR had no standard
operations in it. The pass must have been also run the last among all to-LLVM
passes, in contradiction with the partial conversion logic. Additionally, the
way it was set up could produce invalid operations by removing casts between
LLVM and built-in types even when the consumer did not accept the uncasted
type, or could lead to cryptic conversion errors (recursive application of the
rewrite pattern on `unrealized_conversion_cast` as a means to indicate failure
to eliminate casts).
In fact, the need to eliminate A->B->A `unrealized_conversion_cast`s is not
specific to to-LLVM conversions and can be factored out into a separate type
reconciliation pass, which is achieved in this commit. While the cast operation
itself has a folder pattern, it is insufficient in most conversion passes as
the folder only applies to the second cast. Without complex legality setup in
the conversion target, the conversion infra will either consider the cast
operations valid and not fold them (a separate canonicalization would be
necessary to trigger the folding), or consider the first cast invalid upon
generation and stop with error. The pattern provided by the reconciliation pass
applies to the first cast operation instead. Furthermore, having a separate
pass makes it clear when `unrealized_conversion_cast`s could not have been
eliminated since it is the only reason why this pass can fail.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D109507
After the Math has been split out of the Standard dialect, the
conversion to the LLVM dialect remained as a huge monolithic pass.
This is undesirable for the same complexity management reasons as having
a huge Standard dialect itself, and is even more confusing given the
existence of a separate dialect. Extract the conversion of the Math
dialect operations to LLVM into a separate library and a separate
conversion pass.
Reviewed By: silvas
Differential Revision: https://reviews.llvm.org/D105702
After the MemRef has been split out of the Standard dialect, the
conversion to the LLVM dialect remained as a huge monolithic pass.
This is undesirable for the same complexity management reasons as having
a huge Standard dialect itself, and is even more confusing given the
existence of a separate dialect. Extract the conversion of the MemRef
dialect operations to LLVM into a separate library and a separate
conversion pass.
Reviewed By: herhut, silvas
Differential Revision: https://reviews.llvm.org/D105625
"Standard-to-LLVM" conversion is one of the oldest passes in existence. It has
become quite large due to the size of the Standard dialect itself, which is
being split into multiple smaller dialects. Furthermore, several conversion
features are useful for any dialect that is being converted to the LLVM
dialect, which, without this refactoring, creates a dependency from those
conversions to the "standard-to-llvm" one.
Put several of the reusable utilities from this conversion to a separate
library, namely:
- type converter from builtin to LLVM dialect types;
- utility for building and accessing values of LLVM structure type;
- utility for building and accessing values that represent memref in the LLVM
dialect;
- lowering options applicable everywhere.
Additionally, remove the type wrapping/unwrapping notion from the type
converter that is no longer relevant since LLVM types has been reimplemented as
first-class MLIR types.
Reviewed By: pifon2a
Differential Revision: https://reviews.llvm.org/D105534
This is the first step to convert vector ops to MMA operations in order to
target GPUs tensor core ops. This currently only support simple cases,
transpose and element-wise operation will be added later.
Differential Revision: https://reviews.llvm.org/D102962
This adds Sdot2d op, which is similar to the usual Neon
intrinsic except that it takes 2d vector operands, reflecting the
structure of the arithmetic that it's performing: 4 separate
4-dimensional dot products, whence the vector<4x4xi8> shape.
This also adds a new pass, arm-neon-2d-to-intr, lowering
this new 2d op to the 1d intrinsic.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D102504
This patch convert the if condition on standalone data operation such as acc.update,
acc.enter_data and acc.exit_data to a scf.if with the operation in the if region.
It removes the operation when the if condition is constant and false. It removes the
the condition if it is contant and true.
Conversion to scf.if is done in order to use the translation to LLVM IR dialect out of the box.
Not sure this is the best approach or we should perform this during the translation from OpenACC
to LLVM IR dialect. Any thoughts welcome.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D103325
Add a conversion pass to convert higher-level type before translation.
This conversion extract meangingful information and pack it into a struct that
the translation (D101504) will be able to understand.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D102170
Some Math operations do not have an equivalent in LLVM. In these cases,
allow a low priority fallback of calling the libm functions. This is to
give functionality and is not a performant option.
Differential Revision: https://reviews.llvm.org/D100367
ArmSVE dialect is behind the recent changes in how the Vector dialect
interacts with backend vector dialects and the MLIR -> LLVM IR
translation module. This patch cleans up ArmSVE initialization within
Vector and removes the need for an LLVMArmSVE dialect.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D100171
The dialect separation was introduced to demarkate ops operating in different
type systems. This is no longer the case after the LLVM dialect has migrated to
using built-in vector types, so the original reason for separation is no longer
valid. Squash the two dialects into one.
The code size decrease isn't quite large: the ops originally in LLVM_AVX512 are
preserved because they match LLVM IR intrinsics specialized for vector element
bitwidth. However, it is still conceptually beneficial to have only one
dialect. I originally considered to use Tablegen multiclasses to define both
the type-polymorphic op and its two intrinsic-related instantiations, but
decided against it given both the complexity of the required Tablegen input and
its dissimilarity with the rest of ODS-defined ops, both potentially resulting
in very poor maintainability.
Depends On D98327
Reviewed By: nicolasvasilache, springerm
Differential Revision: https://reviews.llvm.org/D98328
The two dialects are largely redundant. The former was introduced as a mirror
of the latter operating on LLVM dialect types. This is no longer necessary
since the LLVM dialect operates on built-in types. Combine the two dialects.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D98060
Includes a lowering for tosa.const, tosa.if, and tosa.while to Standard/SCF dialects. TosaToStandard is
used for constant lowerings and TosaToSCF handles the if/while ops.
Resubmission of https://reviews.llvm.org/D97518 with ASAN fixes.
Differential Revision: https://reviews.llvm.org/D97529
Includes a lowering for tosa.const, tosa.if, and tosa.while to Standard/SCF dialects. TosaToStandard is
used for constant lowerings and TosaToSCF handles the if/while ops.
Reviewed By: silvas
Differential Revision: https://reviews.llvm.org/D97352
Initial commit to add support for lowering from TOSA to Linalg. The focus is on
the essential infrastructure for these lowerings and integration with existing
passes.
Includes lowerings for a subset of operations including:
abs, add, sub, pow, and, or, xor, left shift, right shift, tanh
Lit tests are used to validate correctness.
Differential Revision: https://reviews.llvm.org/D94247
Introduce a conversion pass from SCF parallel loops to OpenMP dialect
constructs - parallel region and workshare loop. Loops with reductions are not
supported because the OpenMP dialect cannot model them yet.
The conversion currently targets only one level of parallelism, i.e. only
one top-level `omp.parallel` operation is produced even if there are nested
`scf.parallel` operations that could be mapped to `omp.wsloop`. Nested
parallelism support is left for future work.
Reviewed By: kiranchandramohan
Differential Revision: https://reviews.llvm.org/D91982
The conversion between PDL and the interpreter is split into several different parts.
** The Matcher:
The matching section of all incoming pdl.pattern operations is converted into a predicate tree and merged. Each pattern is first converted into an ordered list of predicates starting from the root operation. A predicate is composed of three distinct parts:
* Position
- A position refers to a specific location on the input DAG, i.e. an
existing MLIR entity being matched. These can be attributes, operands,
operations, results, and types. Each position also defines a relation to
its parent. For example, the operand `[0] -> 1` has a parent operation
position `[0]` (the root).
* Question
- A question refers to a query on a specific positional value. For
example, an operation name question checks the name of an operation
position.
* Answer
- An answer is the expected result of a question. For example, when
matching an operation with the name "foo.op". The question would be an
operation name question, with an expected answer of "foo.op".
After the predicate lists have been created and ordered(based on occurrence of common predicates and other factors), they are formed into a tree of nodes that represent the branching flow of a pattern match. This structure allows for efficient construction and merging of the input patterns. There are currently only 4 simple nodes in the tree:
* ExitNode: Represents the termination of a match
* SuccessNode: Represents a successful match of a specific pattern
* BoolNode/SwitchNode: Branch to a specific child node based on the expected answer to a predicate question.
Once the matcher tree has been generated, this tree is walked to generate the corresponding interpreter operations.
** The Rewriter:
The rewriter portion of a pattern is generated in a very straightforward manor, similarly to lowerings in other dialects. Each PDL operation that may exist within a rewrite has a mapping into the interpreter dialect. The code for the rewriter is generated within a FuncOp, that is invoked by the interpreter on a successful pattern match. Referenced values defined in the matcher become inputs the generated rewriter function.
An example lowering is shown below:
```mlir
// The following high level PDL pattern:
pdl.pattern : benefit(1) {
%resultType = pdl.type
%inputOperand = pdl.input
%root, %results = pdl.operation "foo.op"(%inputOperand) -> %resultType
pdl.rewrite %root {
pdl.replace %root with (%inputOperand)
}
}
// is lowered to the following:
module {
// The matcher function takes the root operation as an input.
func @matcher(%arg0: !pdl.operation) {
pdl_interp.check_operation_name of %arg0 is "foo.op" -> ^bb2, ^bb1
^bb1:
pdl_interp.return
^bb2:
pdl_interp.check_operand_count of %arg0 is 1 -> ^bb3, ^bb1
^bb3:
pdl_interp.check_result_count of %arg0 is 1 -> ^bb4, ^bb1
^bb4:
%0 = pdl_interp.get_operand 0 of %arg0
pdl_interp.is_not_null %0 : !pdl.value -> ^bb5, ^bb1
^bb5:
%1 = pdl_interp.get_result 0 of %arg0
pdl_interp.is_not_null %1 : !pdl.value -> ^bb6, ^bb1
^bb6:
// This operation corresponds to a successful pattern match.
pdl_interp.record_match @rewriters::@rewriter(%0, %arg0 : !pdl.value, !pdl.operation) : benefit(1), loc([%arg0]), root("foo.op") -> ^bb1
}
module @rewriters {
// The inputs to the rewriter from the matcher are passed as arguments.
func @rewriter(%arg0: !pdl.value, %arg1: !pdl.operation) {
pdl_interp.replace %arg1 with(%arg0)
pdl_interp.return
}
}
}
```
Differential Revision: https://reviews.llvm.org/D84580
This reverts commit 4986d5eaff with
proper patches to CMakeLists.txt:
- Add MLIRAsync as a dependency to MLIRAsyncToLLVM
- Add Coroutines as a dependency to MLIRExecutionEngine
Lower from Async dialect to LLVM by converting async regions attached to `async.execute` operations into LLVM coroutines (https://llvm.org/docs/Coroutines.html):
1. Outline all async regions to functions
2. Add LLVM coro intrinsics to mark coroutine begin/end
3. Use MLIR conversion framework to convert all remaining async types and ops to LLVM + Async runtime function calls
All `async.await` operations inside async regions converted to coroutine suspension points. Await operation outside of a coroutine converted to the blocking wait operations.
Implement simple runtime to support concurrent execution of coroutines.
Reviewed By: herhut
Differential Revision: https://reviews.llvm.org/D89292
Add conversion pass for Vector dialect to SPIR-V dialect and add some simple
conversion pattern for vector.broadcast, vector.insert, vector.extract.
Differential Revision: https://reviews.llvm.org/D88761
Adding a conversion pattern for the parallel Operation. This will
help the conversion of parallel operation with standard dialect to
parallel operation with llvm dialect. The type conversion of the block
arguments in a parallel region are controlled by the pattern for the
parallel Operation. Without this pattern, a parallel Operation with
block arguments cannot be converted from standard to LLVM dialect.
Other OpenMP operations without regions are marked as legal. When
translation of OpenMP operations with regions are added then patterns
for these operations can also be added.
Also uses all the standard to llvm patterns. Patterns of other dialects
can be added later if needed.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D86273
These commits set up the skeleton for SPIR-V to LLVM dialect conversion.
I created SPIR-V to LLVM pass, registered it in Passes.td, InitAllPasses.h.
Added a pattern for `spv.BitwiseAndOp` and tests for it. Integer, float
and vector types are converted through LLVMTypeConverter.
Differential Revision: https://reviews.llvm.org/D81100
Add a new pass to lower operations from the `shape` to the `std` dialect.
The conversion applies only to the `size_to_index` and `index_to_size`
operations and affected types.
Other patterns will be added as needed.
Differential Revision: https://reviews.llvm.org/D81091
Make ConvertKernelFuncToCubin pass to be generic:
- Rename to ConvertKernelFuncToBlob.
- Allow specifying triple, target chip, target features.
- Initializing LLVM backend is supplied by a callback function.
- Lowering process from MLIR module to LLVM module is via another callback.
- Change mlir-cuda-runner to adopt the revised pass.
- Add new tests for lowering to ROCm HSA code object (HSACO).
- Tests for CUDA and ROCm are kept in separate directories.
Differential Revision: https://reviews.llvm.org/D80142
Due to similar APIs between CUDA and ROCm (HIP),
ConvertGpuLaunchFuncToCudaCalls pass could be used on both platforms with some
refactoring.
In this commit:
- Migrate ConvertLaunchFuncToCudaCalls from GPUToCUDA to GPUCommon, and rename.
- Rename runtime wrapper APIs be platform-neutral.
- Let GPU binary annotation attribute be specifiable as a PassOption.
- Naming changes within the implementation and tests.
Subsequent patches would introduce ROCm-specific tests and runtime wrapper
APIs.
Differential Revision: https://reviews.llvm.org/D80167
This reverts commit cdb6f05e2d.
The build is broken with:
You have called ADD_LIBRARY for library obj.MLIRGPUtoCUDATransforms without any source files. This typically indicates a problem with your CMakeLists.txt file
Due to similar APIs between CUDA and ROCm (HIP),
ConvertGpuLaunchFuncToCudaCalls pass could be used on both platforms with some
refactoring.
In this commit:
- Migrate ConvertLaunchFuncToCudaCalls from GPUToCUDA to GPUCommon, and rename.
- Rename runtime wrapper APIs be platform-neutral.
- Let GPU binary annotation attribute be specifiable as a PassOption.
- Naming changes within the implementation and tests.
Subsequent patches would introduce ROCm-specific tests and runtime wrapper
APIs.
Differential Revision: https://reviews.llvm.org/D80167
The following Conversions are affected: LoopToStandard -> SCFToStandard,
LoopsToGPU -> SCFToGPU, VectorToLoops -> VectorToSCF. Full file paths are
affected. Additionally, drop the 'Convert' prefix from filenames living under
lib/Conversion where applicable.
API names and CLI options for pass testing are also renamed when applicable. In
particular, LoopsToGPU contains several passes that apply to different kinds of
loops (`for` or `parallel`), for which the original names are preserved.
Differential Revision: https://reviews.llvm.org/D79940
This revision starts decoupling the include the kitchen sink behavior of Linalg to LLVM lowering by inserting a -convert-linalg-to-std pass.
The lowering of linalg ops to function calls was previously lowering to memref descriptors by having both linalg -> std and std -> LLVM patterns in the same rewrite.
When separating this step, a new issue occurred: the layout is automatically type-erased by this process. This revision therefore introduces memref casts to perform these type erasures explicitly. To connect everything end-to-end, the LLVM lowering of MemRefCastOp is relaxed because it is artificially more restricted than the op semantics. The op semantics already guarantee that source and target MemRefTypes are cast-compatible. An invalid lowering test now becomes valid and is removed.
Differential Revision: https://reviews.llvm.org/D79468
Conversion/ folders were originally intended to store patterns for
DialectA->DialectB conversions that depend on both dialects and do not
conceptually belong to either of the dialects. As such, DialectA->DialectA
conversion does not make sense under Conversion/ and should rather live with
the dialect it operates on.
Differential Revision: https://reviews.llvm.org/D79569
The Vector Dialect [document](https://mlir.llvm.org/docs/Dialects/Vector/) discusses the vector abstractions that MLIR supports and the various tradeoffs involved.
One of the layer that is missing in OSS atm is the Hardware Vector Ops (HWV) level.
This revision proposes an AVX512-specific to add a new Dialect/Targets/AVX512 Dialect that would directly target AVX512-specific intrinsics.
Atm, we rely too much on LLVM’s peephole optimizer to do a good job from small insertelement/extractelement/shufflevector. In the future, when possible, generic abstractions such as VP intrinsics should be preferred.
The revision will allow trading off HW-specific vs generic abstractions in MLIR.
Differential Revision: https://reviews.llvm.org/D75987
Summary:
Utility to perform CallOp Dialect conversion, specifically handling cases where
an argument type has changed and the corresponding CallOp needs to be updated.
Differential Revision: https://reviews.llvm.org/D76326
Implement a pass to convert gpu.launch_func op into a sequence of
Vulkan runtime calls. The Vulkan runtime API surface is huge so currently we
don't expose separate external functions in IR for each of them, instead we
expose a few external functions to wrapper libraries which manages
Vulkan runtime.
Differential Revision: https://reviews.llvm.org/D74549
This commit adds a pattern to lower linalg.generic for reduction
to spv.GroupNonUniform* ops. Right now this only supports integer
reduction on 1-D input memref. Shader entry point ABI is queried
to make sure that the input memref's shape matches the local
workgroup's invocation configuration. This makes sure that the
workload fits in one local workgroup so that we can leverage
SPIR-V group non-uniform operations.
linglg.generic is a structured op that preserves the right level
of information. It is easier to recognize reduction at this level
than performing analysis on loops.
This commit also exposes `getElementPtr` in SPIRVLowering.h given
that it's a generally useful utility function.
Differential Revision: https://reviews.llvm.org/D73437
This CL refactors some of the MLIR vector dependencies to allow decoupling VectorOps, vector analysis, vector transformations and vector conversions from each other.
This makes the system more modular and allows extracting VectorToVector into VectorTransforms that do not depend on vector conversions.
This refactoring exhibited a bunch of cyclic library dependencies that have been cleaned up.
PiperOrigin-RevId: 283660308
This is step 1/n in refactoring infrastructure along the Vector dialect to make it ready for retargetability and composable progressive lowering.
PiperOrigin-RevId: 280529784
Mogball