ObjectCache is an ExecutionEngine utility, so its anchor belongs there. The
practical impact of this change is that ORC users no longer need to link MCJIT
to use ObjectCaches.
llvm-svn: 280616
As it turns out, whether we zero-extend or sign-extend i8/i16 constants, which
are illegal types promoted to i32 on PowerPC, is a choice constrained by
assumptions within the infrastructure. Specifically, the logic in
FunctionLoweringInfo::ComputePHILiveOutRegInfo assumes that constant PHI
operands will be zero extended, and so, at least when materializing constants
that are PHI operands, we must do the same.
The rest of our fast-isel implementation does not appear to depend on the fact
that we were sign-extending i8/i16 constants, and all other targets also appear
to zero-extend small-bitwidth constants in fast-isel; we'll now do the same (we
had been doing this only for i1 constants, and sign-extending the others).
Fixes PR27721.
llvm-svn: 280614
This adds support for modules that require (non-)freestanding
environment, such as the compiler builtin mm_malloc submodule.
Differential Revision: https://reviews.llvm.org/D23871
llvm-svn: 280613
Summary:
The inliner may need to determine where a given funclet unwinds to,
and this determination may depend on other funclets throughout the
funclet tree. The code that performs this walk in getUnwindDestToken
memoizes results to avoid redundant computations. In the case that
a funclet's unwind destination is derived from its ancestor, there's
code to walk back down the tree from the ancestor updating the memo
map of its descendants to record the unwind destination. This change
fixes that code to account for the case that some descendant has a
different unwind destination, which can happen if that unwind dest
is a descendant of the EHPad being queried and thus didn't determine
its unwind destination.
Also update test inline-funclets.ll, which is supposed to cover such
scenarios, to include a case that fails an assertion without this fix
but passes with it.
Fixes PR29151.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24117
llvm-svn: 280610
This code represents the Week of Code work I did on bringing up
lldb-server LLGS support for Darwin. It does not include the
Xcode project changes needed, as we don't want to throw that switch
until more support is implemented (i.e. this change is inert, no
build systems use it yet. I've verified on Ubuntu 16.04, macOS
Xcode and macOS cmake builds).
This change does some minimal refactoring of code that is shared
with the Linux LLGS portion, moving it from NativeProcessLinux into
NativeProcessProtocol. That code is also used by NativeProcessDarwin.
Current state on Darwin:
* Process launching is implemented. (Attach is not).
Launching on devices has not yet been tested (FBS/BKS might
need a bit of work).
* Inferior waitpid monitoring and communication of exit status
via MainLoop callback is implemented.
* Memory read/write, breakpoints, thread register context, etc.
are not yet implemented. This impacts process stop/resume, as
the initial launch suspended immediately starts the process
up and running because it doesn't know it is supposed to remain
stopped.
* I implemented the equivalent of MachThreadList as
NativeThreadListDarwin, in anticipation that we might want to
factor out common parts into NativeThreadList{Protocol} and share
some code here. After writing it, though, the fallout from merging
Mach Task/Process into a single concept plus some other minor
changes makes the whole NativeThreadListDarwin concept nothing more
than dead weight. I am likely going to get rid of this class and
just manage it directly in NativeProcessDarwin, much like I did
for NativeProcessLinux.
* There is a stub-out call for starting a STDIO thread. That will
go away and adopt the MainLoop pselect-based IOObject reading.
I am developing the fully-integrated changes in the following repo,
which contains the necessary Xcode bits and the glue that enables
lldb-debugserver on a macOS system:
https://github.com/tfiala/lldb/tree/llgs-darwin
This change also breaks out a few of the lldb-server tests into
their own directory, and adds some $qHostInfo tests (not sure why
I didn't write those tests back when I initially implemented that
on the Linux side).
llvm-svn: 280604
... but instead rely on the assumptions that we derive for load/store
instructions.
Before we were able to delinearize arrays, we used GEP pointer instructions
to derive information about the likely range of induction variables, which
gave us more freedom during loop scheduling. Today, this is not needed
any more as we delinearize multi-dimensional memory accesses and as part
of this process also "assume" that all accesses to these arrays remain
inbounds. The old derive-assumptions-from-GEP code has consequently become
mostly redundant. We drop it both to clean up our code, but also to improve
compile time. This change reduces the scop construction time for 3mm in
no-asserts mode on my machine from 48 to 37 ms.
llvm-svn: 280601
CGP currently drops select's MD_prof profile data when
generating conditional branch which can lead to bad
code layout. The patch fixes the issue.
Differential Revision: http://reviews.llvm.org/D24169
llvm-svn: 280600
Because the recent change about ODR type uniquing in the context,
we can reach types defined in another module during IR linking.
This triggered some assertions in case we IR link without starting
from an empty module. To alleviate that, we can self-map metadata
defined in the destination module so that they won't be visited.
Differential Revision: https://reviews.llvm.org/D23841
llvm-svn: 280599
I'm not sure if this should be considered a bug in
copyImplicitOps or not, but implicit operands that are part
of the static instruction definition should not be copied.
llvm-svn: 280594
Summary:
This contains two changes that reduce the time spent in WQM, with the
intention of reducing bandwidth required by VMEM loads:
1. Sampling instructions by themselves don't need to run in WQM, only their
coordinate inputs need it (unless of course there is a dependent sampling
instruction). The initial scanInstructions step is modified accordingly.
2. When switching back from WQM to Exact, switch back as soon as possible.
This affects the logic in processBlock.
This should always be a win or at best neutral.
There are also some cleanups (e.g. remove unused ExecExports) and some new
debugging output.
Reviewers: arsenm, tstellarAMD, mareko
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: http://reviews.llvm.org/D22092
llvm-svn: 280590
Summary:
This fixes a rare bug in polygon stippling with non-monolithic pixel shaders.
The underlying problem is as follows: the prolog part contains the polygon
stippling sequence, i.e. a kill. The main part then enables WQM based on the
_reduced_ exec mask, effectively undoing most of the polygon stippling.
Since we cannot know whether polygon stippling will be used, the main part
of a non-monolithic shader must always return to exact mode to fix this
problem.
Reviewers: arsenm, tstellarAMD, mareko
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: https://reviews.llvm.org/D23131
llvm-svn: 280589
Summary:
This patch allows threads not created using `std::thread` to use `std::notify_all_at_thread_exit` by ensuring the TL state has been initialized within `std::notify_all_at_thread_exit`.
Additionally this patch "fixes" a potential oddity in `__thread_local_pointer::reset(pointer)`, which would previously delete the old thread local data. However there should *never* be old thread local data because pthread *should* null it out on thread exit. Unfortunately it's possible that pthread failed to do this according to the spec:
>
> Upon key creation, the value NULL shall be associated with the new key in all active threads. Upon thread creation, the value NULL shall be associated with all defined keys in the new thread.
>
> An optional destructor function may be associated with each key value. At thread exit, if a key value has a non-NULL destructor pointer, and the thread has a non-NULL value associated with that key, the value of the key is set to NULL, and then the function pointed to is called with the previously associated value as its sole argument. The order of destructor calls is unspecified if more than one destructor exists for a thread when it exits.
>
> If, after all the destructors have been called for all non-NULL values with associated destructors, there are still some non-NULL values with associated destructors, then the process is repeated. If, after at least {PTHREAD_DESTRUCTOR_ITERATIONS} iterations of destructor calls for outstanding non-NULL values, there are still some non-NULL values with associated destructors, implementations may stop calling destructors, or they may continue calling destructors until no non-NULL values with associated destructors exist, even though this might result in an infinite loop.
However if pthread fails to delete the value it is probably incorrect for us to do it. Destroying the value performs all of the "at thread exit" actions registered with it but we are way past "at thread exit".
Reviewers: mclow.lists, bcraig, EricWF
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D24159
llvm-svn: 280588
readlane/writelane do not support using m0 as the output/input.
Constrain the register class of spill vregs to try to avoid this,
but also handle spilling of the physreg when necessary by inserting
an additional copy to a normal SGPR.
llvm-svn: 280584
Some Windows SDK classes, for example
Windows::Storage::Streams::IBufferByteAccess, use the ATL way of spelling
attributes:
[uuid("....")] class IBufferByteAccess {};
To be able to use __uuidof() to grab the uuid off these types, clang needs to
support uuid as a Microsoft attribute. There was already code to skip Microsoft
attributes, extend that to look for uuid and parse it. Use the new "Microsoft"
attribute type added in r280575 (and r280574, r280576) for this.
Final part of https://reviews.llvm.org/D23895
llvm-svn: 280578
There was already a function that moved attributes off the declspec into
an attribute list for attributes applying to the type, teach that function to
also move Microsoft attributes around and rename it to match its new broader
role.
Nothing uses Microsoft attributes yet, so no behavior change.
Part of https://reviews.llvm.org/D23895
llvm-svn: 280576
This is for attributes in []-delimited lists preceding a class, like e.g.
`[uuid("...")] class Foo {};` Not used by anything yet, so no behavior change.
Part of https://reviews.llvm.org/D23895
llvm-svn: 280575
into ParseDeclOrFunctionDefInternal() (which is called by
MaybeParseMicrosoftAttributes()), so that the attributes can be stored in
the DeclSpec. No behavior change yet, part of https://reviews.llvm.org/D23895
llvm-svn: 280574
The only intrusive thing about SparseBitVector's usage of ilist<> was
that new was usually called externally. There were no custom traits.
It seems like the reason to switch to ilist in r41855 was to avoid
pointer invalidation, but std::list<> has that feature too. Maybe
std::list<>::emplace makes this a little more obvious than it was then.
Switch over to std::list<> and simplify the code.
llvm-svn: 280573
The comment starting with "ParseDeclarationOrFunctionDefinition -" is above
a function called ParseDeclOrFunctionDefInternal. Fix the comment by not
mentioning a function name, like the style guide requests nowadays. No behavior
change.
llvm-svn: 280572
PowerPC assembly code in the wild, so it seems, has things like this:
bc+ 12, 28, .L9
This is a bit odd because the '+' here becomes part of the BO field, and the BO
field is otherwise the first operand. Nevertheless, the ISA specification does
clearly say that the +- hint syntax applies to all conditional-branch mnemonics
(that test either CTR or a condition register, although not the forms which
check both), both basic and extended, so this is supposed to be valid.
This introduces some asm-parser-only definitions which take only the upper
three bits from the specified BO value, and the lower two bits are implied by
the +- suffix (via some associated aliases).
Fixes PR23646.
llvm-svn: 280571
Inheriting from std::iterator uses more boiler-plate than manual
typedefs. Avoid that in both ilist_iterator and
MachineInstrBundleIterator.
This has the side effect of removing ilist_iterator from certain ADL
lookups in namespace std; calls to std::next need to be qualified by
"std::" that didn't have to before. The one case of this in-tree was
operating on a temporary, so I used the more compact operator++.
llvm-svn: 280570
Split out iplist_impl from iplist, and change SymbolTableList to inherit
directly from iplist_impl. This makes it more straightforward to add
new template paramaters to iplist [*]:
- iplist_impl takes a "base" list that provides the intrusive
functionality (usually simple_ilist<T>) and a traits class.
- iplist no longer takes a "Traits" template parameter. It only takes
the value_type, T, and instantiates iplist_impl with simple_ilist<T>
and ilist_traits<T>.
- SymbolTableList now inherits from iplist_impl, instead of iplist.
Note for out-of-tree code: if you have an iplist whose second template
parameter was *not* the default (i.e., not ilist_traits<YourT>), you
have three options:
- Stop using a custom traits class, and instead specialize
ilist_traits<YourT>. This is the usual thing to do.
- Specialize iplist<YourT> to pass your custom traits class into
iplist_impl.
- Create your own trivial list type that passes your custom traits class
into iplist_impl (see SymbolTableList<> for an example).
[*]: The eventual goal is to start tracking a sentinel bit on the
MachineInstr list even when LLVM_ENABLE_ABI_BREAKING_CHECKS is off,
which will enable MachineBasicBlock::reverse_iterator to have normal
list invalidation semantics that matching the new
iplist<>::reverse_iterator from r280032.
llvm-svn: 280569
Lang Hames