Transition InstrProf and Coverage over to the stricter Error/Expected
interface.
Changes since the initial commit:
- Fix error message printing in llvm-profdata.
- Check errors in loadTestingFormat() + annotateAllFunctions().
- Defer error handling in InstrProfIterator to InstrProfReader.
Differential Revision: http://reviews.llvm.org/D19901
llvm-svn: 269491
Publics stream seems to contain information as to public symbols.
It actually contains a serialized hash table along with fixed-sized
headers. This patch is not complete. It scans only till the end of
the stream and dump the header information. I'll write code to
de-serialize the hash table later.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20256
llvm-svn: 269484
Transition InstrProf and Coverage over to the stricter Error/Expected
interface.
Differential Revision: http://reviews.llvm.org/D19901
llvm-svn: 269462
This patch adds basic support for MachO::load_command. Load command types and sizes are encoded in the YAML and expanded back into MachO.
The YAML doesn't yet support load command structs, that is coming next. In the meantime as a temporary measure when writing MachO files the load commands are padded with zeros so that the generated binary is valid.
llvm-svn: 269442
This reverts commit r269428, as it breaks the LLDB build. We need to
understand how to change LLDB in the same way as LLC before landing this
again.
llvm-svn: 269432
Without a diagnostic handler installed, llc's behaviour is to exit on the first
error that it encounters. This is very different from the behaviour of clang
and other front ends, which try to gather as many errors as possible before
exiting.
This commit adds a diagnostic handler to llc, allowing it to find and report
more than one error. The old behaviour is preserved under a flag (-exit-on-error).
Some of the tests fail with the new diagnostic handler, so they have to use the
new flag in order to run under the previous behaviour. Some of these are known
bugs, others need further investigation. Ideally, we should fix the tests and
remove the flag at some point in the future.
Patch by Diana Picus.
llvm-svn: 269428
This change is the gold side of the change made in D17115 and clang
patch r261045 to add a ThinLTO specific pipeline that moves more of
the optimization to the backends.
llvm-svn: 269386
In verbose mode, we emit a warning if the DWOId of a skeleton CU
mismatches the DWOId of the referenced module. This patch updates the
cached DWOId after a module has been loaded to the DWOId of the module
on disk (instead of storing the DWOId we expected to load). This
allows us to correctly emit the mismatch warning for all subsequent
object files that want to import the same module. This patch also
ensures both warnings are only emitted in verbose mode.
rdar://problem/26214027
llvm-svn: 269383
I've added the reserved field as an "optional" in YAML, but I've added asserts in the yaml2macho code to enforce that the field is present in mach_header_64, but not in mach_header.
llvm-svn: 269320
This introduces a variadic template and some helper macros to
safely and correctly deserialize many types of common record
fields while maintaining error checking.
Differential Revision: http://reviews.llvm.org/D20183
Reviewed By: rnk, amccarth
llvm-svn: 269315
Since we want to be able to use yaml to describe degenerate object files as well as valid ones, we need to be explicit of some fields in your yaml definitions.
llvm-svn: 269313
This patch adds the ability to dump mach headers. For my local clang binary the macho2yaml output is now:
--- !mach-o
FileHeader:
cputype: 0x01000007
cpusubtype: 0x80000003
filetype: 0x00000002
ncmds: 19
flags: 0x00A18085
...
llvm-svn: 269304
Adding the initial files for adding MachO support to yaml2obj. Passing a MachO file will result in an error.
I will be implementing obj2yaml and yaml2obj for MachO in parallel so that one can be used to test the other.
llvm-svn: 269244
Adding the initial files for adding MachO support to obj2yaml. Passing a MachO file will result in a new not_implemented error.
I will be implementing obj2yaml and yaml2obj for MachO in parallel so that one can be used to test the other.
llvm-svn: 269243
Summary:
Add support for emission of plaintext lists of the imported files for
each distributed backend compilation. Used for distributed build file
staging.
Invoked with new gold-plugin thinlto-emit-imports-files option, which is
only valid with thinlto-index-only (i.e. for distributed builds), or
from llvm-lto with new -thinlto-action=emitimports value.
Depends on D19556.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19636
llvm-svn: 269067
This restores commit r268627:
Summary:
When launching ThinLTO backends in a distributed build (currently
supported in gold via the thinlto-index-only plugin option), emit
an individual index file for each backend process as described here:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098272.html
...
Differential Revision: http://reviews.llvm.org/D19556
Address msan failures by avoiding std::prev on map.end(), the
theory is that this is causing issues due to some known UB problems
in __tree.
llvm-svn: 269059
In -run-pass mode verify/print machine function immediately after
loading the .mir file if -verify-machineinstr/-print-machineinstrs
option is specified.
llvm-svn: 269014
Many files include Passes.h but only a fraction needs to know about the
TargetPassConfig class. Move it into an own header. Also rename
Passes.cpp to TargetPassConfig.cpp while we are at it.
llvm-svn: 269011
Looks like you need the complete definition of "X" when calling a "X
&func()" declared function even when not using the result further.
llvm-svn: 269006
We now construct a custom pass pipeline instead of injecting
start-before/stop-after into the default pipeline construction. This
allows to specify any pass known to the pass registry. Previously
specifying indirectly added analysis passes or passes not added to the
pipeline add all would not be added and we would silently do nothing.
This also restricts the -run-pass option to cases with .mir input.
llvm-svn: 269003
The BinaryHolder would query the archive member MemoryBuffer name
to check if the current open archive also contains the next requested
objectfile. This comparison was using a StringRef to a temporary
buffer. It only happened with fat archives. This commit adds long-lived
storage along with the MemoryBuffers for the fat archive filename.
The added test would fail during an ASAN build without the fix.
llvm-svn: 268924
When updating an existing archive, llvm-ar opens the old archive into a
`MemoryBuffer`, does its thing, and writes the results to a temporary
file. That file is then renamed to the original archive filename, thus
replacing it with the updated contents. However, on Windows at least,
what would happen is that the `MemoryBuffer` for the old archive would
actually be an mmap'ed view of the file, so when it came time to do the
rename via Win32's `ReplaceFile`, it would succeed but would be unable
to fully replace the file since there would still be a handle open on
it; instead, the old version got renamed to a random temporary name and
left behind.
Patch by Cameron!
llvm-svn: 268916
r267249 removed the dual ARM/Thumb interface from MachOObjectFile,
simplifying llvm-dsymutil's code. This unfortunately also regressed
llvm-dsymutil's ability to select thumb slices, because the simplified
code was also dealing with the discrepency between the slice arch
(eg. armv7m) and the triple arch name (eg. thumbv7m).
llvm-svn: 268894
This reuses the CVTypeDumper from libcodeview to dump full
information about type records within a PDB file.
Differential Revision: http://reviews.llvm.org/D20022
Reviewed By: rnk
llvm-svn: 268808
load commands.
The existing test case in test/Object/macho-invalid.test for
macho-invalid-too-small-segment-load-command has a cmdsize of 55, while
being too small also it is not a multiple of 4. So when that check is added
this test case will produce a different error. So I constructed a new test case
that will trigger the intended error.
I also changed the error message to be consistent with the other malformed Mach-O
file error messages which prints the load command index. I also removed both
object_error::macho_load_segment_too_small and
object_error::macho_load_segment_too_many_sections from Object/Error.h
as they are not needed and can just use object_error::parse_failed and let the
error message string distinguish the specific error.
llvm-svn: 268652
ThinLTO is using the Module Identifier to find the corresponding entry
in the index. However when reproducing part of the flow from temporary
files generated from the linker, you'd like to process a file and
force llvm-lto to use another module identifier than the current
filename. The alternative would be to tweak the index, which would be
more involved.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 268643
Summary:
When launching ThinLTO backends in a distributed build (currently
supported in gold via the thinlto-index-only plugin option), emit
an individual index file for each backend process as described here:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098272.html
The individual index file encodes the summary and module information
required for implementing the importing/exporting decisions made
for a given module in the thin link step.
This is in place of the current mechanism that uses the combined index
to make importing decisions in each back end independently. It is an
enabler for doing global summary based optimizations in the thin link
step (which will be recorded in the individual index files), and reduces
the size of the index that must be sent to each backend process, and
the amount of work to scan it in the backends.
Rather than create entirely new ModuleSummaryIndex structures (and all
the included unique_ptrs) for each backend index file, a map is created
to record all of the GUID and summary pointers needed for a particular
index file. The IndexBitcodeWriter walks this map instead of the full
index (hiding the details of managing the appropriate summary iteration
in a new iterator subclass). This is more efficient than walking the
entire combined index and filtering out just the needed summaries during
each backend bitcode index write.
Depends on D19481.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19556
llvm-svn: 268627
Summary:
Port the dumper in llvm-readobj over to it.
I'm planning to use this visitor to power type stream merging.
While we're at it, try to switch from StringRef to ArrayRef<uint8_t> in some
places.
Reviewers: zturner, amccarth
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19899
llvm-svn: 268535
Vedant Kumar