Summary:
Currently when --passes is used, any passes specified via -foo are
ignored. Explicitly bail out when that happens.
This requires changing some tests. Most were straightforward, but
codegenprepare-produced-address-math.ll is tricky. One of its RUNs runs
CodeGenPrepare. I tried porting CodeGenPrepare to the NPM, but ended up
getting stuck when I needed a TargetMachine. NPM doesn't have support
for MachineFunctions yet. So I just deleted that RUN line, since it was
mass-added in https://reviews.llvm.org/D54848 and is likely not that
useful.
Reviewers: echristo, hans
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82271
For IR generated by a compiler, this is really simple: you just take the
datalayout from the beginning of the file, and apply it to all the IR
later in the file. For optimization testcases that don't care about the
datalayout, this is also really simple: we just use the default
datalayout.
The complexity here comes from the fact that some LLVM tools allow
overriding the datalayout: some tools have an explicit flag for this,
some tools will infer a datalayout based on the code generation target.
Supporting this properly required plumbing through a bunch of new
machinery: we want to allow overriding the datalayout after the
datalayout is parsed from the file, but before we use any information
from it. Therefore, IR/bitcode parsing now has a callback to allow tools
to compute the datalayout at the appropriate time.
Not sure if I covered all the LLVM tools that want to use the callback.
(clang? lli? Misc IR manipulation tools like llvm-link?). But this is at
least enough for all the LLVM regression tests, and IR without a
datalayout is not something frontends should generate.
This change had some sort of weird effects for certain CodeGen
regression tests: if the datalayout is overridden with a datalayout with
a different program or stack address space, we now parse IR based on the
overridden datalayout, instead of the one written in the file (or the
default one, if none is specified). This broke a few AVR tests, and one
AMDGPU test.
Outside the CodeGen tests I mentioned, the test changes are all just
fixing CHECK lines and moving around datalayout lines in weird places.
Differential Revision: https://reviews.llvm.org/D78403
IRCE pass checks that it can calculate loop bounds by checking
SCEV availability at loop entry. However it is possible that loop
bound SCEV is loop invariant, but instruction used to compute it
resides within loop. In such case adjusting loop bound in preheader
using IRBuilder leads to malformed SSA.
Use SCEVExpander instead to generate proper instructions.
Reviewed-by: mkazantsev
Differential Revision: https://reviews.llvm.org/D73496
We were failing to compute trip counts (both exact and maximum) for any loop which involved a comparison against either an umin or smin. It looks like this simply got missed when we added smin/umin to SCEV. (Note: umin was submitted separately earlier today. Turned out two folks hit this at the same time.)
Differential Revision: https://reviews.llvm.org/D67514
llvm-svn: 371776
InsertBinop now accepts NoWrapFlags, so pass them through when
expanding a simple add expression.
This is the first re-commit of the functional changes from rL362687,
which was previously reverted.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 363364
If the given SCEVExpr has no (un)signed flags attached to it, transfer
these to the resulting instruction or use them to find an existing
instruction.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 362687
Summary:
Currently we express umin as `~umax(~x, ~y)`. However, this becomes
a problem for operands in non-integral pointer spaces, because `~x`
is not something we can compute for `x` non-integral. However, since
comparisons are generally still allowed, we are actually able to
express `umin(x, y)` directly as long as we don't try to express is
as a umax. Support this by adding an explicit umin/smin representation
to SCEV. We do this by factoring the existing getUMax/getSMax functions
into a new function that does all four. The previous two functions were
largely identical.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D50167
llvm-svn: 360159
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
llvm-svn: 358546
This patch relaxes restrictions on types of latch condition and range check.
In current implementation, they should match. This patch allows to handle
wide range checks against narrow condition. The motivating example is the
following:
int N = ...
for (long i = 0; (int) i < N; i++) {
if (i >= length) deopt;
}
In this patch, the option that enables this support is turned off by
default. We'll wait until it is switched to true.
Differential Revision: https://reviews.llvm.org/D56837
Reviewed By: reames
llvm-svn: 351926
This reverts r319889.
Unfortunately, wrapping flags are not a part of SCEV's identity (they
do not participate in computing a hash value or in equality
comparisons) and in fact they could be assigned after the fact w/o
rebuilding a SCEV.
Grep for const_cast's to see quite a few of examples, apparently all
for AddRec's at the moment.
So, if 2 expressions get built in 2 slightly different ways: one with
flags set in the beginning, the other with the flags attached later
on, we may end up with 2 expressions which are exactly the same but
have their operands swapped in one of the commutative N-ary
expressions, and at least one of them will have "sorted by complexity"
invariant broken.
2 identical SCEV's won't compare equal by pointer comparison as they
are supposed to.
A real-world reproducer is added as a regression test: the issue
described causes 2 identical SCEV expressions to have different order
of operands and therefore compare not equal, which in its turn
prevents LoadStoreVectorizer from vectorizing a pair of consecutive
loads.
On a larger example (the source of the test attached, which is a
bugpoint) I have seen even weirder behavior: adding a constant to an
existing SCEV changes the order of the existing terms, for instance,
getAddExpr(1, ((A * B) + (C * D))) returns (1 + (C * D) + (A * B)).
Differential Revision: https://reviews.llvm.org/D40645
llvm-svn: 340777
In the patch rL329547, we have lifted the over-restrictive limitation on collected range
checks, allowing to work with range checks with the end of their range not being
provably non-negative. However it appeared that the non-negativity of this value was
assumed in the utility function `ClampedSubtract`. In particular, its reasoning is based
on the fact that `0 <= SINT_MAX - X`, which is not true if `X` is negative.
The function `ClampedSubtract` is only called twice, once with `X = 0` (which is OK)
and the second time with `X = IRC.getEnd()`, where we may now see the problem if
the end is actually a negative value. In this case, we may sometimes miscompile.
This patch is the conservative fix of the miscompile problem. Rather than rejecting
non-provably non-negative `getEnd()` values, we will check it for non-negativity in
runtime. For this, we use function `smax(smin(X, 0), -1) + 1` that is equal to `1` if `X`
is non-negative and is equal to 0 if `X` is negative. If we multiply `Begin, End` of safe
iteration space by this function calculated for `X = IRC.getEnd()`, we will get the original
`[Begin, End)` if `IRC.getEnd()` was non-negative (and, thus, `ClampedSubtract` worked
correctly) and the empty range `[0, 0)` in case if ` IRC.getEnd()` was negative.
So we in fact prohibit execution of the main loop if at least one of range checks was
made against a negative value (and we figured it out in runtime). It is still better than
what we have before (non-negativity had to be proved in compile time) and prevents
us from miscompile, however it is sometiles too restrictive for unsigned range checks
against a negative value (which in fact can be eliminated).
Once we re-implement `ClampedSubtract` in a way that it handles negative `X` correctly,
this limitation can be lifted, too.
Differential Revision: https://reviews.llvm.org/D46860
Reviewed By: samparker
llvm-svn: 332809
After investigation discussed in D45439, it would seem that the nsw
flag restriction is unnecessary in most cases. So the IsInductionVar
lambda has been removed, the functionality extracted, and now only
require nsw when using eq/ne predicates.
Differential Revision: https://reviews.llvm.org/D45617
llvm-svn: 330256
Created a helper function to query for non negative SCEVs. Uses the
SGE predicate to catch constants that could be interpreted as
negative.
Differential Revision: https://reviews.llvm.org/D45481
llvm-svn: 329907
In IRCE, we have a very old legacy check that works when we collect comparisons that we
treat as range checks. It ensures that the value against which the indvar is compared is
loop invariant and is also positive.
This latter condition remained there since the times when IRCE was only able to handle
signed latch comparison. As the optimization evolved, it now learned how to intersect
signed or unsigned ranges, and this logic has no reliance on the fact that the right border
of each range should be positive.
The old implementation of this non-negativity check was also naive enough and just looked
into ranges (while most of other IRCE logic tries to use power of SCEV implications), so this
check did not allow to deal with the most simple case that looks like follows:
int size; // not known non-negative
int length; //known non-negative;
i = 0;
if (size != 0) {
do {
range_check(i < size);
range_check(i < length);
++i;
} while (i < size)
}
In this case, even if from some dominating conditions IRCE could parse loop
structure, it could only remove the range check against `length` and simply
ignored the check against `size`.
In this patch we remove this obsolete check. It will allow IRCE to pick comparison
against `size` as a potential range check and then let Range Intersection logic
decide whether it is OK to eliminate it or not.
Differential Revision: https://reviews.llvm.org/D45362
Reviewed By: samparker
llvm-svn: 329547
This patch teaches SCEV how to prove implications for SCEVUnknown nodes that are Phis.
If we need to prove `Pred` for `LHS, RHS`, and `LHS` is a Phi with possible incoming values
`L1, L2, ..., LN`, then if we prove `Pred` for `(L1, RHS), (L2, RHS), ..., (LN, RHS)` then we can also
prove it for `(LHS, RHS)`. If both `LHS` and `RHS` are Phis from the same block, it is sufficient
to prove the predicate for values that come from the same predecessor block.
The typical case that it handles is that we sometimes need to prove that `Phi(Len, Len - 1) >= 0`
given that `Len > 0`. The new logic was added to `isImpliedViaOperations` and only uses it and
non-recursive reasoning to prove the facts we need, so it should not hurt compile time a lot.
Differential Revision: https://reviews.llvm.org/D44001
Reviewed By: anna
llvm-svn: 329150
As a follow-up to r328480, this updates the logic for the decreasing
safety checks in a similar manner:
- CanBeMax is replaced by CannotBeMaxInLoop which queries
isLoopEntryGuardedByCond on the maximum value.
- SumCanReachMin is replaced by isSafeDecreasingBound which includes
some logic from parseLoopStructure and, again, has been updated to
use isLoopEntryGuardedByCond on the given bounds.
Differential Revision: https://reviews.llvm.org/D44776
llvm-svn: 328613
CanBeMin is currently used which will report true for any unknown
values, but often a check is performed outside the loop which covers
this situation:
for (int i = 0; i < N; ++i)
...
if (N > 0)
for (int i = 0; i < N; ++i)
...
So I've add 'LoopGuardedAgainstMin' which reports whether N is
greater than the minimum value which then allows loop with a variable
loop count to be optimised. I've also moved the increasing bound
checking into its own function and replaced SumCanReachMax is another
isLoopEntryGuardedByCond function.
llvm-svn: 328480
There are two nontrivial details here:
* Loop structure update interface is quite different with new pass manager,
so the code to add new loops was factored out
* BranchProbabilityInfo is not a loop analysis, so it can not be just getResult'ed from
within the loop pass. It cant even be queried through getCachedResult as LoopCanonicalization
sequence (e.g. LoopSimplify) might invalidate BPI results.
Complete solution for BPI will likely take some time to discuss and figure out,
so for now this was partially solved by making BPI optional in IRCE
(skipping a couple of profitability checks if it is absent).
Most of the IRCE tests got their corresponding new-pass-manager variant enabled.
Only two of them depend on BPI, both marked with TODO, to be turned on when BPI
starts being available for loop passes.
Reviewers: chandlerc, mkazantsev, sanjoy, asbirlea
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D43795
llvm-svn: 327619
The range of SCEVUnknown Phi which merges values `X1, X2, ..., XN`
can be evaluated as `U(Range(X1), Range(X2), ..., Range(XN))`.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D43810
llvm-svn: 326418
The failures happened because of assert which was overconfident about
SCEV's proving capabilities and is generally not valid.
Differential Revision: https://reviews.llvm.org/D42835
llvm-svn: 324473
Sometimes `isLoopEntryGuardedByCond` cannot prove predicate `a > b` directly.
But it is a common situation when `a >= b` is known from ranges and `a != b` is
known from a dominating condition. Thia patch teaches SCEV to sum these facts
together and prove strict comparison via non-strict one.
Differential Revision: https://reviews.llvm.org/D42835
llvm-svn: 324453
This patch removes assert that SCEV is able to prove that a value is
non-negative. In fact, SCEV can sometimes be unable to do this because
its cache does not update properly. This assert will be returned once this
problem is resolved.
llvm-svn: 323309
Currently, IRC contains `Begin` and `Step` as SCEVs and `End` as value.
Aside from that, `End` can also be `nullptr` which can be later conditionally
converted into a non-null SCEV.
To make this logic more transparent, this patch makes `End` a SCEV and
calculates it early, so that it is never a null.
Differential Revision: https://reviews.llvm.org/D39590
llvm-svn: 322364
In rL316552, we ban intersection of unsigned latch range with signed range check and vice
versa, unless the entire range check iteration space is known positive. It was a correct
functional fix that saved us from dealing with ambiguous values, but it also appeared
to be a very restrictive limitation. In particular, in the following case:
loop:
%iv = phi i32 [ 0, %preheader ], [ %iv.next, %latch]
%iv.offset = add i32 %iv, 10
%rc = icmp slt i32 %iv.offset, %len
br i1 %rc, label %latch, label %deopt
latch:
%iv.next = add i32 %iv, 11
%cond = icmp i32 ult %iv.next, 100
br it %cond, label %loop, label %exit
Here, the unsigned iteration range is `[0, 100)`, and the safe range for range
check is `[-10, %len - 10)`. For unsigned iteration spaces, we use unsigned
min/max functions for range intersection. Given this, we wanted to avoid dealing
with `-10` because it is interpreted as a very big unsigned value. Semantically, range
check's safe range goes through unsigned border, so in fact it is two disjoint
ranges in IV's iteration space. Intersection of such ranges is not trivial, so we prohibited
this case saying that we are not allowed to intersect such ranges.
What semantics of this safe range actually means is that we can start from `-10` and go
up increasing the `%iv` by one until we reach `%len - 10` (for simplicity let's assume that
`%len - 10` is a reasonably big positive value).
In particular, this safe iteration space includes `0, 1, 2, ..., %len - 11`. So if we were able to return
safe iteration space `[0, %len - 10)`, we could safely intersect it with IV's iteration space. All
values in this range are non-negative, so using signed/unsigned min/max for them is unambiguous.
In this patch, we alter the algorithm of safe range calculation so that it returnes a subset of the
original safe space which is represented by one continuous range that does not go through wrap.
In order to reach this, we use modified SCEV substraction function. It can be imagined as a function
that substracts by `1` (or `-1`) as long as the further substraction does not cause a wrap in IV iteration
space. This allows us to perform IRCE in many situations when we deal with IV space and range check
of different types (in terms of signed/unsigned).
We apply this approach for both matching and not matching types of IV iteration space and the
range check. One implication of this is that now IRCE became smarter in detection of empty safe
ranges. For example, in this case:
loop:
%iv = phi i32 [ %begin, %preheader ], [ %iv.next, %latch]
%iv.offset = sub i32 %iv, 10
%rc = icmp ult i32 %iv.offset, %len
br i1 %rc, label %latch, label %deopt
latch:
%iv.next = add i32 %iv, 11
%cond = icmp i32 ult %iv.next, 100
br it %cond, label %loop, label %exit
If `%len` was less than 10 but SCEV failed to trivially prove that `%begin - 10 >u %len- 10`,
we could end up executing entire loop in safe preloop while the main loop was still generated,
but never executed. Now, cutting the ranges so that if both `begin - 10` and `%len - 10` overflow,
we have a trivially empty range of `[0, 0)`. This in some cases prevents us from meaningless optimization.
Differential Revision: https://reviews.llvm.org/D39954
llvm-svn: 318639
The logic of replacing of a couple `RANGE_CHECK_LOWER + RANGE_CHECK_UPPER`
into `RANGE_CHECK_BOTH` in fact duplicates the logic of range intersection which
happens when we calculate safe iteration space. Effectively, the result of intersection of
these ranges doesn't differ from the range of merged range check.
We chose to remove duplicating logic in favor of code simplicity.
Differential Revision: https://reviews.llvm.org/D39589
llvm-svn: 318508
When expanding exit conditions for pre- and postloops, we may end up expanding a
recurrency from the loop to in its loop's preheader. This produces incorrect IR.
This patch ensures that IRCE uses SCEVExpander correctly and only expands code which
is safe to expand in this particular location.
Differentian Revision: https://reviews.llvm.org/D39234
llvm-svn: 318381
This patch reverts rL311205 that was initially a wrong fix. The real problem
was in intersection of signed and unsigned ranges (see rL316552), and the
patch being reverted masked the problem instead of fixing it.
By now, the test against which rL311205 was made works OK even without this
code. This revert patch also contains a test case that demonstrates incorrect
behavior caused by rL311205: it is caused by incorrect choise of signed max
instead of unsigned.
llvm-svn: 317088
Rename `Offset`, `Scale`, `Length` into `Begin`, `Step`, `End` respectively
to make naming of similar entities for Ranges and Range Checks more
consistent.
Differential Revision: https://reviews.llvm.org/D39414
llvm-svn: 316979
IRCE for unsigned latch conditions was temporarily disabled by rL314881. The motivating
example contained an unsigned latch condition and a signed range check. One of the safe
iteration ranges was `[1, SINT_MAX + 1]`. Its right border was incorrectly interpreted as a negative
value in `IntersectRange` function, this lead to a miscompile under which we deleted a range check
without inserting a postloop where it was needed.
This patch brings back IRCE for unsigned latch conditions. Now we treat range intersection more
carefully. If the latch condition was unsigned, we only try to consider a range check for deletion if:
1. The range check is also unsigned, or
2. Safe iteration range of the range check lies within `[0, SINT_MAX]`.
The same is done for signed latch.
Values from `[0, SINT_MAX]` are unambiguous, these values are non-negative under any interpretation,
and all values of a range intersected with such range are also non-negative.
We also use signed/unsigned min/max functions for range intersection depending on type of the
latch condition.
Differential Revision: https://reviews.llvm.org/D38581
llvm-svn: 316552
For a SCEV range, this patch replaces the naive emptiness check for SCEV ranges
which looks like `Begin == End` with a SCEV check. The range is guaranteed to be
empty of `Begin >= End`. We should filter such ranges out and do not try to perform
IRCE for them.
For example, we can get such range when intersecting range `[A, B)` and `[C, D)`
where `A < B < C < D`. The resulting range is `[max(A, C), min(B, D)) = [C, B)`.
This range is empty, but its `Begin` does not match with `End`.
Making IRCE for an empty range is basically safe but unprofitable because we
never actually get into the main loop where the range checks are supposed to
be eliminated. This patch uses SCEV mechanisms to treat loops with proved
`Begin >= End` as empty.
Differential Revision: https://reviews.llvm.org/D39082
llvm-svn: 316550
IRCE should not apply when the safe iteration range is proved to be empty.
In this case we do unneeded job creating pre/post loops and then never
go to the main loop.
This patch makes IRCE not apply to empty safe ranges, adds test for this
situation and also modifies one of existing tests where it used to happen
slightly.
Reviewed By: anna
Differential Revision: https://reviews.llvm.org/D38577
llvm-svn: 315437
We have found some corner cases connected to range intersection where IRCE makes
a bad thing when the latch condition is unsigned. The fix for that will go as a follow up.
This patch temporarily disables IRCE for unsigned latch conditions until the issue is fixed.
The unsigned latch conditions were introduced to IRCE by rL310027.
Differential Revision: https://reviews.llvm.org/D38529
llvm-svn: 314881
Revert the patch causing the functional failures.
The patch owner is notified with test cases which fail.
Test case has been provided to Maxim offline.
llvm-svn: 313857
Current implementation of parseLoopStructure interprets the latch comparison as a
comarison against `iv.next`. If the actual comparison is made against the `iv` current value
then the loop may be rejected, because this misinterpretation leads to incorrect evaluation
of the latch start value.
This patch teaches the IRCE to distinguish this kind of loops and perform the optimization
for them. Now we use `IndVarBase` variable which can be either next or current value of the
induction variable (previously we used `IndVarNext` which was always the value on next iteration).
Differential Revision: https://reviews.llvm.org/D36215
llvm-svn: 312221
Clamp function was too optimistic when choosing signed or unsigned min/max function for calculations.
In fact, `!IsSignedPredicate` guarantees us that `Smallest` and `Greatest` can be compared safely using unsigned
predicates, but we did not check this for `S` which can in theory be negative.
This patch makes Clamp use signed min/max for cases when it fails to prove `S` being non-negative,
and it adds a test where such situation may lead to incorrect conditions calculation.
Differential Revision: https://reviews.llvm.org/D36873
llvm-svn: 311205
In some particular cases eq/ne conditions can be turned into equivalent
slt/sgt conditions. This patch teaches parseLoopStructure to handle some
of these cases.
Differential Revision: https://reviews.llvm.org/D35010
llvm-svn: 308264
When iterating through loop
for (int i = INT_MAX; i > 0; i--)
We fail to generate the pre-loop for it. It happens because we use the
overflown value in a comparison predicate when identifying whether or not
we need it.
In old logic, we used SLE predicate against Greatest value which exceeds all
seen values of the IV and might be overflown. Now we use the GreatestSeen
value of this IV with SLT predicate.
Also added a test that ensures that a pre-loop is generated for such loops.
Differential Revision: https://reviews.llvm.org/D35347
llvm-svn: 308001
Arthur Eubanks