Determining the bounds of x/ -1 would start off with us dividing it by
INT_MIN. Suffice to say, this would not work very well.
Instead, handle it upfront by checking for -1 and mapping it to the
range: [INT_MIN + 1, INT_MAX. This means that the result of our
division can be any value other than INT_MIN.
llvm-svn: 212981
Summary:
When calculating the upper bound of X / -8589934592, we would perform
the following calculation: Floor[INT_MAX / 8589934592]
However, flooring the result would make us wrongly come to the
conclusion that 1073741824 was not in the set of possible values.
Instead, use the ceiling of the result.
Reviewers: nicholas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4502
llvm-svn: 212976
Implementation is small now -- the interesting logic was moved to
`BranchProbability` a while ago. Move it into `bfi_detail` and get rid
of the related TODOs.
I was originally planning to define it within `BlockFrequencyInfoImpl`
(or `BFIIBase`), but it seems cleaner in a namespace. Besides,
`isPodLike` needs to be specialized before `BlockMass` can be used in
some of the other data structures, and there isn't a clear way to do
that.
llvm-svn: 212866
isDereferenceablePointer should not give up upon encountering any bitcast. If
we're casting from a pointer to a larger type to a pointer to a small type, we
can continue by examining the bitcast's operand. This missing capability
was noted in a comment in the function.
In order for this to work, isDereferenceablePointer now takes an optional
DataLayout pointer (essentially all callers already had such a pointer
available). Most code uses isDereferenceablePointer though
isSafeToSpeculativelyExecute (which already took an optional DataLayout
pointer), and to enable the LICM test case, LICM needs to actually provide its DL
pointer to isSafeToSpeculativelyExecute (which it was not doing previously).
llvm-svn: 212686
BasicAA contains knowledge of certain intrinsics, such as memcpy and memset,
and uses that information to form more-accurate answers to CallSite vs. Loc
ModRef queries. Unfortunately, it did not use this information when answering
CallSite vs. CallSite queries.
Generically, when an intrinsic takes one or more pointers and the intrinsic is
marked only to read/write from its arguments, the offset/size is unknown. As a
result, the generic code that answers CallSite vs. CallSite (and CallSite vs.
Loc) queries in AA uses UnknownSize when forming Locs from an intrinsic's
arguments. While BasicAA's CallSite vs. Loc override could use more-accurate
size information for some intrinsics, it did not do the same for CallSite vs.
CallSite queries.
This change refactors the intrinsic-specific logic in BasicAA into a generic AA
query function: getArgLocation, which is overridden by BasicAA to supply the
intrinsic-specific knowledge, and used by AA's generic implementation. This
allows the intrinsic-specific knowledge to be used by both CallSite vs. Loc and
CallSite vs. CallSite queries, and simplifies the BasicAA implementation.
Currently, only one function, Mac's memset_pattern16, is handled by BasicAA
(all the rest are intrinsics). As a side-effect of this refactoring, BasicAA's
getModRefBehavior override now also returns OnlyAccessesArgumentPointees for
this function (which is an improvement).
llvm-svn: 212572
When INT_MIN is the numerator in a sdiv, we would not properly handle
overflow when calculating the bounds of possible values; abs(INT_MIN) is
not a meaningful number.
Instead, check and handle INT_MIN by reasoning that the largest value is
INT_MIN/-2 and the smallest value is INT_MIN.
This fixes PR20199.
llvm-svn: 212307
This patch:
1) Improves the cost model for x86 alternate shuffles (originally
added at revision 211339);
2) Teaches the Cost Model Analysis pass how to analyze alternate shuffles.
Alternate shuffles are a special kind of blend; on x86, we can often
easily lowered alternate shuffled into single blend
instruction (depending on the subtarget features).
The existing cost model didn't take into account subtarget features.
Also, it had a couple of "dead" entries for vector types that are never
legal (example: on x86 types v2i32 and v2f32 are not legal; those are
always either promoted or widened to 128-bit vector types).
The new x86 cost model takes into account what target features we have
before returning the shuffle cost (i.e. the number of instructions
after the blend is lowered/expanded).
This patch also teaches the Cost Model Analysis how to identify and analyze
alternate shuffles (i.e. 'SK_Alternate' shufflevector instructions):
- added function 'isAlternateVectorMask';
- added some logic to check if an instruction is a alternate shuffle and, in
case, call the target specific TTI to get the corresponding shuffle cost;
- added a test to verify the cost model analysis on alternate shuffles.
llvm-svn: 212296
Inlining functions with block addresses can cause many problem and requires a
rich infrastructure to support including escape analysis. At this point the
safest approach to address these problems is by blocking inlining from
happening.
Background:
There have been reports on Ruby segmentation faults triggered by inlining
functions with block addresses like
//Ruby code snippet
vm_exec_core() {
finish_insn_seq_0 = &&INSN_LABEL_finish;
INSN_LABEL_finish:
;
}
This kind of scenario can also happen when LLVM picks a subset of blocks for
inlining, which is the case with the actual code in the Ruby environment.
LLVM suppresses inlining for such functions when there is an indirect branch.
The attached patch does so even when there is no indirect branch. Note that
user code like above would not make much sense: using the global for jumping
across function boundaries would be illegal.
Why was there a segfault:
In the snipped above the block with the label is recognized as dead So it is
eliminated. Instead of a block address the cloner stores a constant (sic!) into
the global resulting in the segfault (when the global is used in a goto).
Why had it worked in the past then:
By luck. In older versions vm_exec_core was also inlined but the label address
used was the block label address in vm_exec_core. So the global jump ended up
in the original function rather than in the caller which accidentally happened
to work.
Test case ./tools/clang/test/CodeGen/indirect-goto.c will fail as a result
of this commit.
rdar://17245966
llvm-svn: 212077
string_ostream is a safe and efficient string builder that combines opaque
stack storage with a built-in ostream interface.
small_string_ostream<bytes> additionally permits an explicit stack storage size
other than the default 128 bytes to be provided. Beyond that, storage is
transferred to the heap.
This convenient class can be used in most places an
std::string+raw_string_ostream pair or SmallString<>+raw_svector_ostream pair
would previously have been used, in order to guarantee consistent access
without byte truncation.
The patch also converts much of LLVM to use the new facility. These changes
include several probable bug fixes for truncated output, a programming error
that's no longer possible with the new interface.
llvm-svn: 211749
ScaledNumber has been cleaned up enough to pull out of BFI now. Still
work to do there (tests for shifting, bloated printing code, etc.), but
it seems clean enough for its new home.
llvm-svn: 211562
Summary:
With this patch, range metadata can be added to call/invoke including
IntrinsicInst. Previously, it could only be added to load.
Rename computeKnownBitsLoad to computeKnownBitsFromRangeMetadata because
range metadata is not only used by load.
Update the language reference to reflect this change.
Test Plan:
Add several tests in range-2.ll to confirm the verifier is happy with
having range metadata on call/invoke.
Add two tests in AddOverFlow.ll to confirm annotating range metadata to
call/invoke can benefit InstCombine.
Reviewers: meheff, nlewycky, reames, hfinkel, eliben
Reviewed By: eliben
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4187
llvm-svn: 211281
never be true in a well-defined context. The checking for null pointers
has been moved into the caller logic so it does not rely on undefined behavior.
llvm-svn: 210497
Tested and works fine with clang using libstdc++.
All indications are that this was fixed some time ago and isn't a problem with
any clang version we support.
I've added a note in PR6907 which is still open for some reason.
llvm-svn: 210485
Support headers shouldn't use config.h definitions, and they should never be
undefined like this.
ConstantFolding.cpp was the only user of this facility and already includes
config.h for other math features, so it makes sense to move the checks there at
point of use.
(The implicit config.h was also quite dangerous -- removing the FEnv.h include
would have silently disabled math constant folding without causing any tests to
fail. Need to investigate -Wundef once the cleanup is done.)
This eliminates the last config.h include from LLVM headers, paving the way for
more consistent configuration checks.
llvm-svn: 210483
Before, we where looking at the size of the pointer type that specifies the
location from which to load the element. This did not make any sense at all.
This change fixes a bug in the delinearization where we failed to delinerize
certain load instructions.
llvm-svn: 210435
It includes a pass that rewrites all indirect calls to jumptable functions to pass through these tables.
This also adds backend support for generating the jump-instruction tables on ARM and X86.
Note that since the jumptable attribute creates a second function pointer for a
function, any function marked with jumptable must also be marked with unnamed_addr.
llvm-svn: 210280
without this case we would end on an infinite recursion: the remainder is zero,
so Numerator - Remainder is equal to Numerator and so we would recursively ask
for the division of Numerator by Denominator.
llvm-svn: 209838
when ScalarEvolution::getElementSize returns nullptr it is safe to early return
in ScalarEvolution::findArrayDimensions such that we avoid later problems when
we try to divide the terms by ElementSize.
llvm-svn: 209837
This is a corner case I have stumbled upon when dealing with ARM64 type
conversions. I was not able to extract a testcase for the community codebase to
fail on. The patch conservatively discards a division that would have ended up
in an ICE due to a type mismatch when building a multiply expression. I have
also added code to a place that builds add expressions and in which we should be
careful not to pass in operands of different types.
llvm-svn: 209694
We do not need to compute the GCD anymore after we removed the constant
coefficients from the terms: the terms are now all parametric expressions and
there is no need to recognize constant terms that divide only a subset of the
terms. We only rely on the size of the terms, i.e., the number of operands in
the multiply expressions, to sort the terms and recognize the parametric
dimensions.
llvm-svn: 209693
No functional change is intended: instead of relying on the delinearization to
come up with the base pointer as a remainder of the divisions in the
delinearization, we just compute it from the array access and use that value.
We substract the base pointer from the SCEV to be delinearized and that
simplifies the work of the delinearizer.
llvm-svn: 209692
The delinearization is needed only to remove the non linearity induced by
expressions involving multiplications of parameters and induction variables.
There is no problem in dealing with constant times parameters, or constant times
an induction variable.
For this reason, the current patch discards all constant terms and multipliers
before running the delinearization algorithm on the terms. The only thing
remaining in the term expressions are parameters and multiply expressions of
parameters: these simplified term expressions are passed to the array shape
recognizer that will not recognize constant dimensions anymore: these will be
recognized as different strides in parametric subscripts.
The only important special case of a constant dimension is the size of elements.
Instead of relying on the delinearization to infer the size of an element,
compute the element size from the base address type. This is a much more precise
way of computing the element size than before, as we would have mixed together
the size of an element with the strides of the innermost dimension.
llvm-svn: 209691
This is a follow-up to r209358: PR19799: Indvars miscompile due to an
incorrect max backedge taken count from SCEV.
That fix was incomplete as pointed out by Arnold and Michael Z. The
code was also too confusing. It needed a careful rewrite with more
unit tests. This version will also happen to optimize more cases.
<rdar://17005101> PR19799: Indvars miscompile...
llvm-svn: 209545
ScalarEvolution::isKnownPredicate() can wrongly reduce a comparison
when both the LHS and RHS are SCEVAddRecExprs. This checks that both
LHS and RHS are guarded in the case when both are SCEVAddRecExprs.
The test case is against indvars because I could not find a way to
directly test SCEV.
Patch by Sanjay Patel!
llvm-svn: 209487
This has to do with the trip count computation for loops with multiple
exits, which is quite subtle. Most passes just ask for a single trip
count number, so we must be conservative assuming any exit could be
taken. Normally, we rely on the "exact" trip count, which was
correctly given as "unknown". However, SCEV also gives a "max"
back-edge taken count. The loops max BE taken count is conservatively
a maximum over the max of each exit's non-exiting iterations
count. Note that some exit tests can be skipped so the max loop
back-edge taken count can actually exceed the max non-exiting
iterations for some exits. However, when we know the loop *latch*
cannot be skipped, we can directly use its max taken count
disregarding other exits. I previously took the minimum here without
checking whether the other exit could be skipped. The correct, and
simpler thing to do here is just to directly use the loop latch's max
non-exiting iterations as the loops max back-edge count.
In the problematic test case, the first loop exit had a max of zero
non-exiting iterations, but could be skipped. The loop latch was known
not to be skipped but had max of one non-exiting iteration. We
incorrectly claimed the loop back-edge could be taken zero times, when
it is actually taken one time.
Fixes Loop %for.body.i: <multiple exits> Unpredictable backedge-taken count.
Loop %for.body.i: max backedge-taken count is 1.
llvm-svn: 209358
Summary:
Analyze the range of values produced by ashr/lshr cst, %V when it is
being used in an icmp.
Reviewers: nicholas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3774
llvm-svn: 209000
Summary:
The dividend in an sdiv tells us the largest and smallest possible
results. Use this fact to optimize comparisons against an sdiv with a
constant dividend.
Reviewers: nicholas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3795
llvm-svn: 208999
Sometimes a LLVM compilation may take more time then a client would like to
wait for. The problem is that it is not possible to safely suspend the LLVM
thread from the outside. When the timing is bad it might be possible that the
LLVM thread holds a global mutex and this would block any progress in any other
thread.
This commit adds a new yield callback function that can be registered with a
context. LLVM will try to yield by calling this callback function, but there is
no guaranteed frequency. LLVM will only do so if it can guarantee that
suspending the thread won't block any forward progress in other LLVM contexts
in the same process.
Once the client receives the call back it can suspend the thread safely and
resume it at another time.
Related to <rdar://problem/16728690>
llvm-svn: 208945
much more effectively when trying to constant fold a load of a constant.
Previously, we only handled bitcasts by trying to find a totally generic
byte representation of the constant and use that. Now, we look through
the bitcast to see what constant we might fold the load into, and then
try to form a constant expression cast of the found value that would be
equivalent to loading the value.
You might wonder why on earth this actually matters. Well, turns out
that the Itanium ABI causes us to create a single array for a vtable
where the first elements are virtual base offsets, followed by the
virtual function pointers. Because the array is homogenous the element
type is consistently i8* and we inttoptr the virtual base offsets into
the initial elements.
Then constructors bitcast these pointers to i64 pointers prior to
loading them. Boom, no more constant folding of virtual base offsets.
This is the first fix to LLVM to address the *insane* performance Eric
Niebler discovered with Clang on his range comprehensions[1]. There is
more to come though, this doesn't *really* fix the problem fully.
[1]: http://ericniebler.com/2014/04/27/range-comprehensions/
llvm-svn: 208856
we do not use the information from SCEVAddRecExpr to compute the shape of the array,
so a better place for this function is in ScalarEvolution.
llvm-svn: 208456
Sorry for the commit spam. My clang-format crashed on me and the vim
plugin did not print an error, but instead just left the formatting
untouched.
llvm-svn: 208358
To compute the dimensions of the array in a unique way, we split the
delinearization analysis in three steps:
- find parametric terms in all memory access functions
- compute the array dimensions from the set of terms
- compute the delinearized access functions for each dimension
The first step is executed on all the memory access functions such that we
gather all the patterns in which an array is accessed. The second step reduces
all this information in a unique description of the sizes of the array. The
third step is delinearizing each memory access function following the common
description of the shape of the array computed in step 2.
This rewrite of the delinearization pass also solves a problem we had with the
previous implementation: because the previous algorithm was by induction on the
structure of the SCEV, it would not correctly recognize the shape of the array
when the memory access was not following the nesting of the loops: for example,
see polly/test/ScopInfo/multidim_only_ivs_3d_reverse.ll
; void foo(long n, long m, long o, double A[n][m][o]) {
;
; for (long i = 0; i < n; i++)
; for (long j = 0; j < m; j++)
; for (long k = 0; k < o; k++)
; A[i][k][j] = 1.0;
Starting with this patch we no longer delinearize access functions that do not
contain parameters, for example in test/Analysis/DependenceAnalysis/GCD.ll
;; for (long int i = 0; i < 100; i++)
;; for (long int j = 0; j < 100; j++) {
;; A[2*i - 4*j] = i;
;; *B++ = A[6*i + 8*j];
these accesses will not be delinearized as the upper bound of the loops are
constants, and their access functions do not contain SCEVUnknown parameters.
llvm-svn: 208232
operations on the call graph. This one forms a cycle, and while not as
complex as removing an internal edge from an SCC, it involves
a reasonable amount of work to find all of the nodes newly connected in
a cycle.
Also somewhat alarming is the worst case complexity here: it might have
to walk roughly the entire SCC inverse DAG to insert a single edge. This
is carefully documented in the API (I hope).
llvm-svn: 207935
This fix simply ensures that both metadata nodes are path-aware before
performing path-aware alias analysis.
This issue isn't normally triggered in LLVM, because we perform an autoupgrade
of the TBAA metadata to the new format when reading in LL or BC files. This
issue only appears when a client creates the IR manually and mixes old and new
TBAA metadata format.
This fixes <rdar://problem/16760860>.
llvm-svn: 207923
just connects an SCC to one of its descendants directly. Not much of an
impact. The last one is the hard one -- connecting an SCC to one of its
ancestors, and thereby forming a cycle such that we have to merge all
the SCCs participating in the cycle.
llvm-svn: 207751
of SCCs in the SCC DAG. Exercise them in the big graph test case. These
will be especially useful for establishing invariants in insertion
logic.
llvm-svn: 207749
edge entirely within an existing SCC. Shockingly, making the connected
component more connected is ... a total snooze fest. =]
Anyways, its wired up, and I even added a test case to make sure it
pretty much sorta works. =D
llvm-svn: 207631
bits), and discover that it's totally broken. Yay tests. Boo bug. Fix
the basic edge removal so that it works by nulling out the removed edges
rather than actually removing them. This leaves the indices valid in the
map from callee to index, and preserves some of the locality for
iterating over edges. The iterator is made bidirectional to reflect that
it now has to skip over null entries, and the skipping logic is layered
onto it.
As future work, I would like to track essentially the "load factor" of
the edge list, and when it falls below a threshold do a compaction.
An alternative I considered (and continue to consider) is storing the
callees in a doubly linked list where each element of the list is in
a set (which is essentially the classical linked-hash-table
datastructure). The problem with that approach is that either you need
to heap allocate the linked list nodes and use pointers to them, or use
a bucket hash table (with even *more* linked list pointer overhead!),
etc. It's pretty easy to get 5x overhead for values that are just
pointers. So far, I think punching holes in the vector, and periodic
compaction is likely to be much more efficient overall in the space/time
tradeoff.
llvm-svn: 207619
This reverts commit r207287, reapplying r207286.
I'm hoping that declaring an explicit struct and instantiating
`addBlockEdges()` directly works around the GCC crash from r207286.
This is a lot more boilerplate, though.
llvm-svn: 207438
contract (and be much more useful). It now provides exactly the
post-order traversal a caller might need to perform on newly formed
SCCs.
llvm-svn: 207410
by avoiding inlining massive switches merely because they have no
instructions in them. These switches still show up where we fail to form
lookup tables, and in those cases they are actually going to cause
a very significant code size hit anyways, so inlining them is not the
right call. The right way to fix any performance regressions stemming
from this is to enhance the switch-to-lookup-table logic to fire in more
places.
This makes PR19499 about 5x less bad. It uncovers a second compile time
problem in that test case that is unrelated (surprisingly!).
llvm-svn: 207403
API requirements much more obvious.
The key here is that there are two totally different use cases for
mutating the graph. Prior to doing any SCC formation, it is very easy to
mutate the graph. There may be users that want to do small tweaks here,
and then use the already-built graph for their SCC-based operations.
This method remains on the graph itself and is documented carefully as
being cheap but unavailable once SCCs are formed.
Once SCCs are formed, and there is some in-flight DFS building them, we
have to be much more careful in how we mutate the graph. These mutation
operations are sunk onto the SCCs themselves, which both simplifies
things (the code was already there!) and helps make it obvious that
these interfaces are only applicable within that context. The other
primary constraint is that the edge being mutated is actually related to
the SCC on which we call the method. This helps make it obvious that you
cannot arbitrarily mutate some other SCC.
I've tried to write much more complete documentation for the interesting
mutation API -- intra-SCC edge removal. Currently one aspect of this
documentation is a lie (the result list of SCCs) but we also don't even
have tests for that API. =[ I'm going to add tests and fix it to match
the documentation next.
llvm-svn: 207339
them, just skip over any DFS-numbered nodes when finding the next root
of a DFS. This allows the entry set to just be a vector as we populate
it from a uniqued source. It also removes the possibility for a linear
scan of the entry set to actually do the removal which can make things
go quadratic if we get unlucky.
llvm-svn: 207312
the DFS stack for leaves in the call graph. As mentioned in my previous
commit, this is particularly interesting for graphs which have high fan
out but low connectivity resulting in many leaves. For such graphs, this
can remove a large % of the DFS stack traffic even though it doesn't
make the stack much smaller.
It's a bit easier to formulate this for the full algorithm because that
one stops completely for each SCC. For example, I was able to directly
eliminate the "Recurse" boolean used to continue an outer loop from the
inner loop.
llvm-svn: 207311
makes working through the worklist much cleaner, and makes it possible
to avoid the 'bool-to-continue-the-outer-loop' hack. Not a huge
difference, but I think this is approaching as polished as I can make
it.
llvm-svn: 207310
processed in the DFS out of the stack completely. Keep it exclusively in
a variable. Re-shuffle some code structure to make this easier. This can
have a very dramatic effect in some cases because call graphs tend to
look like a high fan-out spanning tree. As a consequence, there are
a large number of leaf nodes in the graph, and this technique causes
leaf nodes to never even go into the stack. While this only reduces the
max depth by 1, it may cause the total number of round trips through the
stack to drop by a lot.
Now, most of this isn't really relevant for the incremental version. =]
But I wanted to prototype it first here as this variant is in ways more
complex. As long as I can get the code factored well here, I'll next
make the primary walk look the same. There are several refactorings this
exposes I think.
llvm-svn: 207306
graph in any way because we don't track edges in the SCC graph, just
nodes. This also lets us add a nice assert about the invariant that
we're working on at least a certain number of nodes within the SCC.
llvm-svn: 207305
a helper function. Also factor the other two places where we did the
same thing into the helper function. =] Much cleaner this way. NFC.
llvm-svn: 207300
This reverts commit r207286. It causes an ICE on the
cmake-llvm-x86_64-linux buildbot [1]:
llvm/lib/Analysis/BlockFrequencyInfo.cpp: In lambda function:
llvm/lib/Analysis/BlockFrequencyInfo.cpp:182:1: internal compiler error: in get_expr_operands, at tree-ssa-operands.c:1035
[1]: http://bb.pgr.jp/builders/cmake-llvm-x86_64-linux/builds/12093/steps/build_llvm/logs/stdio
llvm-svn: 207287
Matt Arsenault