This is the last major parent class, so I'll probably start deleting
classes in batches now. Looks like many of the references to the DI*
hierarchy were updated organically along the way.
llvm-svn: 235331
This makes it possible for runtime implementations to disable
subnormal handling at runtime.
When this flag is enabled, decisions about how to handle subnormals
in the library will be controlled by an external variable called
__CLC_SUBNORMAL_DISABLE.
Function implementations should use these new helpers for querying subnormal
support:
__clc_fp16_subnormals_supported();
__clc_fp32_subnormals_supported();
__clc_fp64_subnormals_supported();
In order for the library to link correctly with this feature,
users will be required to either:
1. Insert this variable into the module (if using the LLVM/Clang C++/C APIs).
2. Pass either subnormal_disable.bc or subnormal_use_default.bc to the
linker. These files are distributed with liblclc and installed to
$(installdir). e.g.:
llvm-link -o kernel-out.bc kernel.bc builtins-nosubnormal.bc subnormal_disable.bc
or
llvm-link -o kernel-out.bc kernel.bc builtins-nosubnormal.bc subnormal_use_default.bc
If you do not supply the --enable-runtime-subnormal then the library
behaves the same as it did before this commit.
In addition to these changes, the patch adds helper functions that
should be used when implementing library functions that need
special handling for denormals:
__clc_fp16_subnormals_supported();
__clc_fp32_subnormals_supported();
__clc_fp64_subnormals_supported();
llvm-svn: 235329
Replace uses of `DIScope` with `MDScope*`. There was one spot where
I've left an `MDScope*` uninitialized (where `DIScope` would have been
default-initialized to `nullptr`) -- this is intentional, since the
if/else that follows should unconditional assign it to a value.
llvm-svn: 235327
This adds the following targets to cmake. These can be used to build and link only specific parts of a backend, instead of having to link the whole backend.
- AllTargetsAsmPrinters, AllTargetsAsmParsers, AllTargetsDescs, AllTargetsDisassemblers, AllTargetsInfos
A typical use for these is instead of linking ${LLVM_TARGETS_TO_BUILD}. This commit changes llvm-mc to show how to use the new targets.
Reviewed by Chris Bieneman.
llvm-svn: 235324
ConnectionFileDescriptor::BytesAvailable was reading multiple command
bytes from the command pipe but only processing the first. This
change only allows one byte to be read at a time, ensuring that all
get handled.
This isn't known to cause any bugs, but it might cause current/future
bugs.
Differential Revision: http://reviews.llvm.org/D9098
llvm-svn: 235322
CROSS_COMPILE environment variable is a common convention to specify the path
and/or prefix to cross compilation tools (e.g. ar, objcopy).
Test Plan:
dotest.py $DOTEST_OPTS -t -p 'TestBSDArchives.py|TestBreakpointCommandsFromPython.py|TestFormats.py|TestObjCDynamicValue.py'
All of these tests now compile successfully and pass running macosx -> linux
using a cross compilation toolchain prefixed by CROSS_COMPILE without requiring
changing your PATH. They still pass when run locally on macosx.
Differential Revision: http://reviews.llvm.org/D9072
llvm-svn: 235320
module-loading support for the expression parser.
- It adds support for auto-loading modules referred
to by a compile unit. These references are
currently in the form of empty translation units.
This functionality is gated by the setting
target.auto-import-clang-modules (boolean) = false
- It improves and corrects support for loading
macros from modules, currently by textually
pasting all #defines into the user's expression.
The improvements center around including only those
modules that are relevant to the current context -
hand-loaded modules and the modules that are imported
from the current compile unit.
- It adds an "opt-in" mechanism for all of this
functionality. Modules have to be explicitly
imported (via @import) or auto-loaded (by enabling
the above setting) to enable any of this
functionality.
It also adds support to the compile unit and symbol
file code to deal with empty translation units that
indicate module imports, and plumbs this through to
the CompileUnit interface.
Finally, it makes the following changes to the test
suite:
- It adds a testcase that verifies that modules are
automatically loaded when the appropriate setting
is enabled (lang/objc/modules-auto-import); and
- It modifies lanb/objc/modules-incomplete to test
the case where a module #undefs something that is
#defined in another module.
<rdar://problem/20299554>
llvm-svn: 235313
This commit fixes the code which adds lifetime markers in InlineFunction to skip
zero-sized allocas instead of asserting on them.
rdar://problem/20531155
llvm-svn: 235312
n/1 generates a quotient equal to n and a remainder of 0.
If this case is not recognized, then the SCEV divide() function
can return a remainder that is greater than or equal to the
denominator, which means the delinearized subscripts for the
test case will be incorrect.
Differential Revision: http://reviews.llvm.org/D9003
llvm-svn: 235311
Summary:
This commit moves the functionality of the operation thread into the new monitor thread. This is
required to avoid a kernel race between the two threads and I believe it actually makes the code
cleaner.
Test Plan: Ran the test suite a couple of times, no regressions.
Reviewers: ovyalov, tberghammer, vharron
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D9080
llvm-svn: 235304
The current implementations could exhibit some behavior differences:
raw_fd_ostream: Whatever the underlying fd does with seek+write. In a normal
file, the write position would be back to the old offset.
raw_svector_ostream: The write position is always the end of the stream, so
after pwrite the write position would be the new end. This matches what OS_X
(all BSD?) do with a pwrite in a O_APPEND fd.
Given that we don't need that feature and don't use O_APPEND a lot in LLVM,
just disallow it.
I am open to suggestions on renaming pwrite to something else, but this fixes
the issue for now.
Thanks to Yaron Keren for reporting it.
llvm-svn: 235303
This is now obvious as the pointer alignment behavior was changed.
Before (even with pointer alignment "Left"):
MACRO Constructor(const int &i) : a(a), b(b) {}
After:
MACRO Constructor(const int& i) : a(a), b(b) {}
llvm-svn: 235301
We have to avoid converting a reference to a global into a reference to a local,
but it is fine to look past a local.
Patch by Vasileios Kalintiris.
I just moved the comment and added thet test.
llvm-svn: 235300
Summary:
This will allow us to enable it on the buildbot (and then enable a
sanitizer buildbot).
The problem is that gcc for Mips does not accept -m32/-m64 like clang does.
We therefore need to use the nearest equivalent -mips32r2/-mips64r2. We must
also specify -mabi=64 in the -mips64r2 case since gcc's default ABI has
traditionally been N32 whereas clang's is N64.
Reviewers: sagar
Reviewed By: sagar
Subscribers: llvm-commits, samsonov, kcc, mohit.bhakkad, Anand.Takale, sagar
Differential Revision: http://reviews.llvm.org/D8892
llvm-svn: 235299
This fixes a regression introduced at revision 231243.
The target-independent selection algorithm in FastISel knows how to select
a SINT_TO_FP if the target is SSE but not AVX. That is because on X86, the
tablegen'd 'fastEmit' functions know how to select CVTSI2SSrr and CVTSI2SDrr.
Method X86FastISel::X86SelectSIToFP was therefore working under the
wrong assumption that the target was AVX. That assumption was incorrect since
we can have a target that is neither AVX nor SSE.
So, rather than asserting for the presence of AVX, we should have had an
early exit from 'X86SelectSIToFP' if the target was not AVX.
This patch fixes the issue replacing the invalid assertion with an early exit.
Thanks to Dimitry Andric for reporting this problem and for providing a small
reproducible testcase. Added test pr23273.ll.
llvm-svn: 235295
Fixes https://llvm.org/bugs/show_bug.cgi?id=23235
If pthread_create is followed by pthread_detach,
the new thread may not acquire synchronize with
the parent thread.
llvm-svn: 235293
The arm instruction emulation handles only some of the opcode (including
all of them modifying the PC). For the rest of the instructions we can
advance the PC by the size of the instruction as they don't modify the
PC on any other way.
Differential revision: http://reviews.llvm.org/D9076
llvm-svn: 235292
Previously the read thread was only stopped if CloseOnEOF was set on the
communication channel. It caused it to spin in case of an EOF because
::select() always reported that we can read from the file descriptor.
This CL change this behavior with stopping the read thread on EOF but do
a disconnect only if CloseOnEOF is enabled.
Differential revision: http://reviews.llvm.org/D9077
llvm-svn: 235291
This patch refactors reduction identification code out of LoopVectorizer and
exposes them as common utilities.
No functional change.
Review: http://reviews.llvm.org/D9046
llvm-svn: 235284
When an inline asm call has an output register marked as early-clobber, but
that same register is also an input operand, what should we do? GCC accepts
this, and is documented to accept this for read/write operands saying,
"Furthermore, if the earlyclobber operand is also a read/write operand, then
that operand is written only after it's used." For write-only operands, the
situation seems less clear, but I have at least one existing codebase that
assumes this will work, in part because it has syscall macros like this:
({ \
register uint64_t r0 __asm__ ("r0") = (__NR_ ## name); \
register uint64_t r3 __asm__ ("r3") = ((uint64_t) (arg0)); \
register uint64_t r4 __asm__ ("r4") = ((uint64_t) (arg1)); \
register uint64_t r5 __asm__ ("r5") = ((uint64_t) (arg2)); \
__asm__ __volatile__ \
("sc" \
: "=&r"(r0),"=&r"(r3),"=&r"(r4),"=&r"(r5) \
: "0"(r0), "1"(r3), "2"(r4), "3"(r5) \
: "r6","r7","r8","r9","r10","r11","r12","cr0","memory"); \
r3; \
})
Furthermore, with register aliases and subregister relationships that only the
backend knows about, rejecting this in the frontend seems like a difficult
proposition (if we wanted to do so). However, keeping the early-clobber flag on
the INLINEASM MI does not work for us, because it will cause the register's
live interval to end to soon (so it will not appear defined to be used as an
input).
Fortunately, fixing this does not seem hard: When forming the INLINEASM MI,
check to see if any of the early-clobber outputs are also inputs, and if so,
remove the early-clobber flag.
llvm-svn: 235283
Before we only accepted --dynamic-linker=<file> and -dynamic-linker <file>
but older versions of GNU ld (e.g. 2.17.50) accept this other form, so
try to be compatible.
PR: 23233
llvm-svn: 235282
The fix ensures that scalar sources inserted into a vector are the correct bit size.
Integer scalar sources from BUILD_VECTOR and SCALAR_TO_VECTOR nodes may require truncation that this function doesn't currently support.
llvm-svn: 235281
As with the other sanitizers, it is desirable to allow ubsan's output to be
redirected to somewhere other than stderr (and into per-process log files).
llvm-svn: 235277
in the context of the container itself.
Otherwise we will emit 'unavailable' errors when referencing an unavailable super class
even though the subclass is also marked 'unavailable'.
rdar://20598702
llvm-svn: 235276
Duncan P. N. Exon Smith