In cases where the PSHUFB shuffle mask is shared it might not be bitcasted to a vXi8 byte vector. This patch adds support for decoding these wider shuffle masks from the ConstantPool.
The test case in question makes use of this to recognise the shuffle mask is an unary UNPCKL pattern and simplifies accordingly.
llvm-svn: 261201
While we still do want reducible control flow, the RequiresStructuredCFG
flag imposes more strict structure constraints than WebAssembly wants.
Unsetting this flag enables critical edge splitting and tail merging.
Also, disable TailDuplication explicitly, as it doesn't support virtual
registers, and was previously only disabled by the RequiresStructuredCFG
flag.
llvm-svn: 261190
Changes:
- Added disassembler project
- Fixed all decoding conflicts in .td files
- Added DecoderMethod=“NONE” option to Target.td that allows to
disable decoder generation for an instruction.
- Created decoding functions for VS_32 and VReg_32 register classes.
- Added stubs for decoding all register classes.
- Added several tests for disassembler
Disassembler only supports:
- VI subtarget
- VOP1 instruction encoding
- 32-bit register operands and inline constants
[Valery]
One of the point that requires to pay attention to is how decoder
conflicts were resolved:
- Groups of target instructions were separated by using different
DecoderNamespace (SICI, VI, CI) using similar to AssemblerPredicate
approach.
- There were conflicts in IMAGE_<> instructions caused by two
different reasons:
1. dmask wasn’t specified for the output (fixed)
2. There are image instructions that differ only by the number of
the address components but have the same encoding by the HW spec. The
actual number of address components is determined by the HW at runtime
using image resource descriptor starting from the VGPR encoded in an
IMAGE instruction. This means that we should choose only one instruction
from conflicting group to be the rule for decoder. I didn’t find the way
to disable decoder generation for an arbitrary instruction and therefore
made a onelinear fix to tablegen generator that would suppress decoder
generation when DecoderMethod is set to “NONE”. This is a change that
should be reviewed and submitted first. Otherwise I would need to
specify different DecoderNamespace for every instruction in the
conflicting group. I haven’t checked yet if DecoderMethod=“NONE” is not
used in other targets.
3. IMAGE_GATHER decoder generation is for now disabled and to be
done later.
[/Valery]
Patch By: Sam Kolton
Differential Revision: http://reviews.llvm.org/D16723
llvm-svn: 261185
These passes are optimizations, and should be disabled when not
optimizing.
Also create an MCCodeGenInfo so the opt level is correctly plumbed to
the backend pass manager.
Also remove the command line flag for disabling register coloring;
running llc with -O0 should now be useful for debugging, so it's not
necessary.
Differential Revision: http://reviews.llvm.org/D17327
llvm-svn: 261176
After r261154, we were only clearing flags if the known-zero register was
originally live-in to the basic block, but we have to do it even if not when
more than one COPY has been eliminated, otherwise the user of the first COPY
may still have <kill> marked.
E.g.
BB#N:
%X0 = COPY %XZR
STRXui %X0<kill>, <fi#0>
%X0 = COPY %XZR
STRXui %X0<kill>, <fi#1>
We can eliminate both copies, X0 is not live-in, but we must clear the kill on
the first store.
Unfortunately, I've been unable to come up with a non-fragile test for this.
I've only seen it in the wild with regalloc-created spills, and attempts to
reproduce that in a reasonable way run afoul of COPY coalescing. Even volatile
asm clobbers were moved around. Should fix the aarch64 bot though.
llvm-svn: 261175
Mostly, this fixes the bug that if the CBZ guaranteed Xn but Wn was used, we
didn't sort out the use-def chain properly.
I've also made it check more than just the last instruction for a compatible
CBZ (so it can cope without fallthroughs). I'd have liked to do that
separately, but it's helps writing the test.
Finally, I removed some custom loops in favour of MachineInstr helpers and
refactored the control flow to flatten it and avoid possibly quadratic
iterations in blocks with many copies. NFC for these, just a general tidy-up.
llvm-svn: 261154
32-bit x86 Windows targets use a linked-list of nodes allocated on the
stack, referenced to via thread-local storage. The personality routine
interprets one of the fields in the node as a 'state number' which
indicates where the personality routine should transfer control.
State transitions are possible only before call-sites which may throw
exceptions. Our previous scheme had us update the state number before
all call-sites which may throw.
Instead, we can try to minimize the number of times we need to store by
reasoning about the nearest store which dominates the current call-site.
If the last store agrees with the current call-site, then we know that
the state-update is redundant and can be elided.
This is largely straightforward: an RPO walk of the blocks allows us to
correctly forward propagate the information when the function is a DAG.
Currently, loops are not handled optimally and may trigger superfluous
state stores.
Differential Revision: http://reviews.llvm.org/D16763
llvm-svn: 261122
Summary:
Previously the machine instructions for bar.sync &co. were not marked as
convergent. This resulted in some MI passes (such as TailDuplication,
fixed in an upcoming patch) doing unsafe things to these instructions.
Reviewers: jingyue
Subscribers: llvm-commits, tra, jholewinski, hfinkel
Differential Revision: http://reviews.llvm.org/D17318
llvm-svn: 261115
Summary:
Otherwise we'll try to do unsafe optimizations on these MIs, such as
sinking loads below calls.
(I suspect that this is not the only bug in the NVPTX instruction
tablegen files; I need to comb through them.)
Reviewers: jholewinski, tra
Subscribers: jingyue, jhen, llvm-commits
Differential Revision: http://reviews.llvm.org/D17315
llvm-svn: 261113
Bug description:
The bug was discovered when test was compiled with -O0.
In case scatter result is DAG root , VectorLegalizer failed (assert) due to LowerMSCATTER() return kmask as result.
Change LowerMSCATTER() to return chain as original node do.
Differential Revision: http://reviews.llvm.org/D17331
llvm-svn: 261090
This section is used for debug information and has no need to be
in memory at runtime. This patch also fixes an error when compiling
the Linux kernel. The error is that there are relocations within the
.pdr section in a VDSO. SHT_REL was removed as it is a section type
and not a section flag, therefore it does not make sense for it to
be there. With this patch, LLVM now emits the same flags as
the GNU assembler.
llvm-svn: 261083
AVX1 doesn't support the shuffling of 256-bit integer vectors. For 32/64-bit elements we get around this by shuffling as float/double but for 8/16-bit elements (assuming they can't widen) we currently just split, shuffle as 128-bit vectors and concatenate the results back.
This patch adds the ability to lower using the bit-blend patterns before defaulting to the splitting behaviour.
Part 2 of 2
Differential Revision: http://reviews.llvm.org/D17292
llvm-svn: 261082
AVX1 doesn't support the shuffling of 256-bit integer vectors. For 32/64-bit elements we get around this by shuffling as float/double but for 8/16-bit elements (assuming they can't widen) we currently just split, shuffle as 128-bit vectors and concatenate the results back.
This patch adds the ability to lower using the bit-mask patterns before defaulting to the splitting behaviour. In some cases this ends up matching what AVX2 would do anyhow or what AVX1 does on the split vectors.
Part 1 of 2
Differential Revision: http://reviews.llvm.org/D17292
llvm-svn: 261081
Avoid reuse of operand variables, keep them local to a particular lowering - the operand collection is unique to each case anyhow.
Renamed from V to Ops to more closely match their purpose.
llvm-svn: 261078
This fixes very slow compilation on
test/CodeGen/Generic/2010-11-04-BigByval.ll . Note that MaxStoresPerMemcpy
and friends are not yet carefully tuned so the cutoff point is currently
somewhat arbitrary. However, it's important that there be a cutoff point
so that we don't emit unbounded quantities of loads and stores.
llvm-svn: 261050
__chkstk clobbers EAX. If EAX is live across the prologue, then we have
to take extra steps to save it. We already had code to do this if EAX
was a register parameter. This change adapts it to work when shrink
wrapping is used.
llvm-svn: 261039
Currently, we sometimes miscompile this vector pattern:
(c ? -v : v)
We lower it to (because "c" is <4 x i1>, lowered as a vector mask):
(~c & v) | (c & -v)
When we have SSSE3, we incorrectly lower that to PSIGN, which does:
(c < 0 ? -v : c > 0 ? v : 0)
in other words, when c is either all-ones or all-zero:
(c ? -v : 0)
While this is an old bug, it rarely triggers because the PSIGN combine
is too sensitive to operand order. This will be improved separately.
Note that the PSIGN tests are also incorrect. Consider:
%b.lobit = ashr <4 x i32> %b, <i32 31, i32 31, i32 31, i32 31>
%sub = sub nsw <4 x i32> zeroinitializer, %a
%0 = xor <4 x i32> %b.lobit, <i32 -1, i32 -1, i32 -1, i32 -1>
%1 = and <4 x i32> %a, %0
%2 = and <4 x i32> %b.lobit, %sub
%cond = or <4 x i32> %1, %2
ret <4 x i32> %cond
if %b is zero:
%b.lobit = <4 x i32> zeroinitializer
%sub = sub nsw <4 x i32> zeroinitializer, %a
%0 = <4 x i32> <i32 -1, i32 -1, i32 -1, i32 -1>
%1 = <4 x i32> %a
%2 = <4 x i32> zeroinitializer
%cond = or <4 x i32> %a, zeroinitializer
ret <4 x i32> %a
whereas we currently generate:
psignd %xmm1, %xmm0
retq
which returns 0, as %xmm1 is 0.
Instead, use a pure logic sequence, as described in:
https://graphics.stanford.edu/~seander/bithacks.html#ConditionalNegate
Fixes PR26110.
Differential Revision: http://reviews.llvm.org/D17181
llvm-svn: 261023
The register stackifier currently checks for intervening stores (and
loads that may alias them) but doesn't account for the fact that the
instruction being moved may affect intervening loads.
Differential Revision: http://reviews.llvm.org/D17298
llvm-svn: 261014
The usual way to get a 32-bit relocation is to use a constant extender which doubles the size of the instruction, 4 bytes to 8 bytes.
Another way is to put a .word32 and mix code and data within a function. The disadvantage is it's not a valid instruction encoding and jumping over it causes prefetch stalls inside the hardware.
This relocation packs a 23-bit value in to an "r0 = add(rX, #a)" instruction by overwriting the source register bits. Since r0 is the return value register, if this instruction is placed after a function call which return void, r0 will be filled with an undefined value, the prefetch won't be confused, and the callee can access the constant value by way of the link register.
llvm-svn: 261006
Summary:
This change will add a pass to remove unnecessary zero copies in target blocks
of cbz/cbnz instructions. E.g., the copy instruction in the code below can be
removed because the cbz jumps to BB1 when x0 is zero :
BB0:
cbz x0, .BB1
BB1:
mov x0, xzr
Jun
Reviewers: gberry, jmolloy, HaoLiu, MatzeB, mcrosier
Subscribers: mcrosier, mssimpso, haicheng, bmakam, llvm-commits, aemerson, rengolin
Differential Revision: http://reviews.llvm.org/D16203
llvm-svn: 261004
Original message:
Get rid of the ifdefs in TargetLowering.
Introduce a new API used only by GlobalISel: CallLowering.
This API will contain target hooks dedicated to call lowering.
llvm-svn: 260998
CopyToReg nodes don't support FrameIndex operands. Other targets select
the FI to some LEA-like instruction, but since we don't have that, we
need to insert some kind of instruction that can take an FI operand and
produces a value usable by CopyToReg (i.e. in a vreg). So insert a dummy
copy_local between Op and its FI operand. This results in a redundant
copy which we should optimize away later (maybe in the post-FI-lowering
peephole pass).
Differential Revision: http://reviews.llvm.org/D17213
llvm-svn: 260987
Summary: This change renames output operand for VOP instructions from dst to vdst. This is needed to enable decoding named operands for disassembler.
Reviewers: vpykhtin, tstellarAMD, arsenm
Subscribers: arsenm, llvm-commits, nhaustov
Projects: #llvm-amdgpu-spb
Differential Revision: http://reviews.llvm.org/D16920
llvm-svn: 260986
WebAssembly doesn't require full RPO; topological sorting is sufficient and
can preserve more of the MachineBlockPlacement ordering. Unfortunately, this
still depends a lot on heuristics, because while we use the
MachineBlockPlacement ordering as a guide, we can't use it in places where
it isn't topologically ordered. This area will require further attention.
llvm-svn: 260978
This avoids some complications updating LiveIntervals to be aware of the new
register lifetimes, because we can just compute new intervals from scratch
rather than describe how the old ones have been changed.
llvm-svn: 260971
Once a pointer is turned into a reference it cannot be nullptr, clang
rightfully warns about this assert being a tautology. Put the assert
before the reference is created.
llvm-svn: 260949
Summary:
In order to pass the tests, this required marking R_MIPS_16 relocations
as needing to point to the symbol and not the section.
Reviewers: vkalintiris, dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D17200
llvm-svn: 260896
Summary:
This section is used for debug information and has no need to be
in memory at runtime. With this patch, LLVM now emits the same flags as
the GNU assembler. This patch also fixes an error when compiling
the Linux kernel, The error is that there are relocations within the
.pdr section in a VDSO.
Reviewers: vkalintiris, dsanders
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D17199
llvm-svn: 260879
If KMOVB not supported (require AVX512DQ) only KMOVW can be used so store size should be 2 bytes.
Differential Revision: http://reviews.llvm.org/D17138
llvm-svn: 260878
r180893 added an indirect include of llvm/Config/Targets.def to
llvm/Support/CodeGen.h, which in turn is included by things like
llvm/IR/Module.h. After a full build of LLVM and Clang, ninja had to
rebuild 1274 files after reconfiguring.
This commit strips CodeGen.h back down to just a pile of enums and moves
the expensive includes over to CodeGenCWrappers.h (which is only
included in two places). This gets ninja down to 88 files if you
reconfigure with, e.g., -DLLVM_TARGETS_TO_BUILD=X86.
llvm-svn: 260835
This patch attempts to represent a shuffle as a repeating shuffle (recognisable by is128BitLaneRepeatedShuffleMask) with the source input(s) in their original lanes, followed by a single permutation of the 128-bit lanes to their final destinations.
On AVX2 we can additionally attempt to match using 64-bit sub-lane permutation. AVX2 can also now match a similar 'broadcasted' repeating shuffle.
This patch has several benefits:
* Avoids prematurely matching with lowerVectorShuffleByMerging128BitLanes which can require both inputs to have their input lanes permuted before shuffling.
* Can replace PERMPS/PERMD instructions - although these are useful for cross-lane unary shuffling, they require their shuffle mask to be pre-loaded (and increase register pressure).
* Matching the repeating shuffle makes use of a lot of existing shuffle lowering.
There is an outstanding minor AVX1 regression (combine_unneeded_subvector1 in vector-shuffle-combining.ll) of a previously 128-bit shuffle + subvector splat being converted to a subvector splat + (2 instruction) 256-bit shuffle, I intend to fix this in a followup patch for review.
Differential Revision: http://reviews.llvm.org/D16537
llvm-svn: 260834
As shown in:
https://llvm.org/bugs/show_bug.cgi?id=23203
...we currently die because lowering believes that mfence is allowed without SSE2 on x86-64,
but the instruction def doesn't know that.
I don't know if allowing mfence without SSE is right, but if not, at least now it's consistently wrong. :)
Differential Revision: http://reviews.llvm.org/D17219
llvm-svn: 260828
Tests for the new scalarize all private access options will be
included with a future commit.
The only functional change is to make the split/scalarize behavior
for private access of > 4 element vectors to be consistent
with the flat/global handling. This makes the spilling worse
in the two changed tests.
llvm-svn: 260804
Replace spills to memory with spills to registers, if possible. This
applies mostly to predicate registers (both scalar and vector), since
they are very limited in number. A spill of a predicate register may
happen even if there is a general-purpose register available. In cases
like this the stack spill/reload may be eliminated completely.
This optimization will consider all stack objects, regardless of where
they came from and try to match the live range of the stack slot with
a dead range of a register from an appropriate register class.
llvm-svn: 260758
Rewrite the code to handle all pseudo-instructions in a single pass.
This temporarily reverts spill slot optimization that used general-
purpose registers to hold values of spilled predicate registers.
llvm-svn: 260696
Historically, AMD internal sp3 assembler has flat_store* addr, data
format. To match existing code and to enable reuse, change LLVM
definitions to match. Also update MC and CodeGen tests.
Differential Revision: http://reviews.llvm.org/D16927
Patch by: Nikolay Haustov
llvm-svn: 260694
Summary:
It is possible that the loop condition can be a boolean constant (infinite loop,
for example). So we sould handle constant condition in annotating a loop. This
patch adds this functionality to support annotating constant condition.
Reviewers: tstellarAMD, arsenm
Subscribers: llvm-commits, arsenm
Differential Revision: http://reviews.llvm.org/D15093
llvm-svn: 260692
We can generate the actual instructions from the intrinsics without the
need for pseudo-instructions. Also, since the intrinsics have a side-
effect in a form of a store, attempt to optimize away loads from the
store location.
llvm-svn: 260690
Summary:
Before this change, callee-save registers would be rounded up to even
pairs of GPRs and FPRs. This change eliminates these extra padding
load/stores, though it does keep the stack allocation the same size
unless both the GPR and FPR sets have an odd size, in which case one
full pair stack slot (16 bytes) is saved.
This optimization cannot currently be done for MachO targets since they
rely on a fast-path .debug_frame equivalent that can only encode
callee-save registers as pairs.
Reviewers: t.p.northover, rengolin, mcrosier, jmolloy
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D17000
llvm-svn: 260689
The DataLayout can calculate alignment of vectors based on the alignment
of the element type and the number of elements. In fact, it is the product
of these two values. The problem is that for vectors of N x i1, this will
return the alignment of N bytes, since the alignment of i1 is 8 bits. The
vector types of vNi1 should be aligned to N bits instead. Provide explicit
alignment for HVX vectors to avoid such complications.
llvm-svn: 260678
This was hardcoded to the static private size, but this
would be missing the offset and additional size for someday
when we have dynamic sizing.
Also stops always initializing flat_scratch even when unused.
In the future we should stop emitting this unless flat instructions
are used to access private memory. For example this will initialize
it almost always on VI because flat is used for global access.
llvm-svn: 260658
Introduce a subtarget feature for this, and leave the default with
the current behavior which assumes up to 16-byte loads/stores can
be used. The field also seems to have the ability to be set to 2 bytes,
but I'm not sure what that would be used for.
llvm-svn: 260651
This is just a trivial implementation:
- Support only arguments passed in registers.
- Support only "plain" arguments, i.e., no sext/zext attribute.
At this point, it is possible to play with the IRTranslator on AArch64:
llc -mtriple arm64-<vendor>-<os> -print-machineinstrs <input.ll> -o - -global-isel
For now, we only support the translation of program with adds and returns.
Follow-up patches are on their way to add a test case (the MIRParser is
not ready as it is).
llvm-svn: 260600
Summary:
It's possible to have resource descriptors and samplers stored in
VGPRs, either by a VMEM instruction or in the case of samplers,
floating-point calculations. When this happens, we need to use
v_readfirstlane to copy these values back to sgprs.
Reviewers: mareko, arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17102
llvm-svn: 260599
Summary:
When we split SMRD instructions into two MUBUFs we were adding the users
of the newly created MUBUFs to the VALU worklist. However, the only
users these instructions had was the REG_SEQUENCE that was inserted
by splitSMRD when the original SMRD instruction was split.
We need to make sure to add the users of the original SMRD to the VALU
worklist before it is split.
I have a test case, but it requires one other bug fix, so it will be
added in a later commt.
Reviewers: mareko, arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17101
llvm-svn: 260588
Summary:
Added support for "VOP3Only" attribute in VOP3bInst encoding.
Set VOP3Only=1 for V_DIV_SCALE_F64/32 insns.
Added support for multi-dest instructions in AMDGPUAs::cvt*().
Added lit test for "V_DIV_SCALE_F64|F32 vreg,vcc|sreg,vreg,vreg,vreg".
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, SamWot, nhaustov, vpykhtin
Differential Revision: http://reviews.llvm.org/D16995
Patch By: Artem Tamazov
llvm-svn: 260560
This patch allows the mixing of scaled and unscaled load/stores to form
load/store pairs.
This is a reapplication of r259812, which had an incorrect assert. The
test_stur_str_no_assert() test is a reduced version of the issue hit in
the AArch64 self-host.
PR24465
llvm-svn: 260523
If the two operands to an instruction were both
subregisters of the same super register, it would incorrectly
think this counted as the same constant bus use.
This fixes the verifier error in fmin_legacy.ll which
was missing -verify-machineinstrs.
llvm-svn: 260495
Separate methods to convert parsed instructions to MCInst:
- VOP3 only instructions (always create modifiers as operands in MCInst)
- VOP2 instrunctions with modifiers (create modifiers as operands
in MCInst when e64 encoding is forced or modifiers are parsed)
- VOP2 instructions without modifiers (do not create modifiers
as operands in MCInst)
- Add VOP3Only flag. Pass HasMods flag to VOP3Common.
- Simplify code that deals with modifiers (-1 is now same as
0). This is no longer needed.
- Add few tests (more will be added separately).
Update error message now correct.
Patch By: Nikolay Haustov
Differential Revision: http://reviews.llvm.org/D16778
llvm-svn: 260483
Summary:
Refactor common value, scope, and label tracking logic out of DwarfDebug
into a common base class called DebugHandlerBase.
Update an old LLVM IR test case to avoid an assertion in LexicalScopes.
Reviewers: dblaikie, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16931
llvm-svn: 260432
Summary:
This fixes a crash where subsequent spills would be unable to scavenge
a register. In particular, it fixes a crash in piglit's
spec@glsl-1.50@execution@geometry@max-input-components (the test still
has a shader that fails to compile because of too many SGPR spills, but
at least it doesn't crash any more).
This is a candidate for the release branch.
Reviewers: arsenm, tstellarAMD
Subscribers: qcolombet, arsenm
Differential Revision: http://reviews.llvm.org/D16558
llvm-svn: 260427
Instead of passing varargs directly on the user stack, allocate a buffer in
the caller's stack frame and pass a pointer to it. This simplifies the C
ABI (e.g. non-C callers of C functions do not need to use C's user stack if
they have their own mechanism) and allows further optimizations in the future
(e.g. fewer functions may need to use the stack).
Differential Revision: http://reviews.llvm.org/D17048
llvm-svn: 260421
The encodings for floating point conditions A(lways) and N(ever) were
incorrectly specified for the assembly parser, per Sparc manual v8 page
121. This change corrects that mistake.
Also, strangely, all of the branch instructions already had MC test
cases, except for the broken ones. Added the tests.
Patch by Chris Dewhurst
Differential Revision: http://reviews.llvm.org/D17074
llvm-svn: 260390
Now the parser supports `%got(sym)` expressions only but `%got(sym + const)`
variant is also valid and accepted by GAS.
Differential Revision: http://reviews.llvm.org/D16885
llvm-svn: 260305
Krzysztof Parzyszek