Commit Graph

323 Commits

Author SHA1 Message Date
Caroline Tice 9088b06899 Make sure writing asynchronous output only backs up
& overwrites prompt if the IOChannel input reader is the top
input reader.

llvm-svn: 131110
2011-05-09 23:06:58 +00:00
Greg Clayton 7349bd9078 While implementing unwind information using UnwindAssemblyInstEmulation I ran
into some cleanup I have been wanting to do when reading/writing registers.
Previously all RegisterContext subclasses would need to implement:

virtual bool
ReadRegisterBytes (uint32_t reg, DataExtractor &data);

virtual bool
WriteRegisterBytes (uint32_t reg, DataExtractor &data, uint32_t data_offset = 0);

There is now a new class specifically designed to hold register values: 
        lldb_private::RegisterValue
        
The new register context calls that subclasses must implement are:

virtual bool
ReadRegister (const RegisterInfo *reg_info, RegisterValue &reg_value) = 0;

virtual bool
WriteRegister (const RegisterInfo *reg_info, const RegisterValue &reg_value) = 0;

The RegisterValue class must be big enough to handle any register value. The
class contains an enumeration for the value type, and then a union for the 
data value. Any integer/float values are stored directly in an appropriate
host integer/float. Anything bigger is stored in a byte buffer that has a length
and byte order. The RegisterValue class also knows how to copy register value
bytes into in a buffer with a specified byte order which can be used to write
the register value down into memory, and this does the right thing when not
all bytes from the register values are needed (getting a uint8 from a uint32
register value..). 

All RegiterContext and other sources have been switched over to using the new
regiter value class.

llvm-svn: 131096
2011-05-09 20:18:18 +00:00
Jim Ingham 2eec4876a2 Fix an unitialized pointer in ValueObject::CreateChildAtIndex.
llvm-svn: 131039
2011-05-07 00:10:58 +00:00
Greg Clayton b2dcc36c05 Added the ability to cast pointer types to another type, no matter what the
ValueObject is, as long as the ValueObject that is being asked to be casted
is a pointer itself.

llvm-svn: 130966
2011-05-05 23:32:56 +00:00
Jim Ingham 2837b766f5 Change "frame var" over to using OptionGroups (and thus the OptionGroupVariableObjectDisplay).
Change the boolean "use_dynamic" over to a tri-state, no-dynamic, dynamic-w/o running target,
and dynamic with running target.

llvm-svn: 130832
2011-05-04 03:43:18 +00:00
Caroline Tice 4a3533ba7f Remove type cast that was causing compiler warning.
llvm-svn: 130790
2011-05-03 20:58:11 +00:00
Caroline Tice 969ed3d10f This patch captures and serializes all output being written by the
command line driver, including the lldb prompt being output by
editline, the asynchronous process output & error messages, and
asynchronous messages written by target stop-hooks.

As part of this it introduces a new Stream class,
StreamAsynchronousIO.  A StreamAsynchronousIO object is created with a
broadcaster, who will eventually broadcast the stream's data for a
listener to handle, and an event type indicating what type of event
the broadcaster will broadcast.  When the Write method is called on a
StreamAsynchronousIO object, the data is appended to an internal
string.  When the Flush method is called on a StreamAsynchronousIO
object, it broadcasts it's data string and clears the string.

Anything in lldb-core that needs to generate asynchronous output for
the end-user should use the StreamAsynchronousIO objects.

I have also added a new notification type for InputReaders, to let
them know that a asynchronous output has been written. This is to
allow the input readers to, for example, refresh their prompts and
lines, if desired.  I added the case statements to all the input
readers to catch this notification, but I haven't added any code for
handling them yet (except to the IOChannel input reader).

llvm-svn: 130721
2011-05-02 20:41:46 +00:00
Jim Ingham 61be0903e5 Adding support for fetching the Dynamic Value for ObjC Objects.
llvm-svn: 130701
2011-05-02 18:13:59 +00:00
Greg Clayton 2289fa4820 Added the ability to set the Platform path for a module through the SBModule
interface.

Added a quick way to set the platform though the SBDebugger interface. I will
actually an a SBPlatform support soon, but for now this will do.

ConnectionFileDescriptor can be passed a url formatted as: "fd://<fd>" where
<fd> is a file descriptor in the current process. This is handy if you have
services, deamons, or other tools that can spawn processes and give you a
file handle.

llvm-svn: 130565
2011-04-30 01:09:13 +00:00
Greg Clayton e5b3498eef Added the start of the CFI row production using the
emulate instruction classes.

llvm-svn: 130556
2011-04-29 22:50:31 +00:00
Greg Clayton 68ebae61d1 Added the ability to specify dumping options (show types, show location,
depth control, pointer depth, and more) when dumping memory and viewing as
a type.

llvm-svn: 130436
2011-04-28 20:55:26 +00:00
Greg Clayton 84c39663a9 Added a new OptionValue subclass for lldb::Format: OptionValueFormat. Added
new OptionGroup subclasses for:
- output file for use with options: 
        long opts: --outfile <path> --append--output
        short opts: -o <path> -A
        
- format for use with options:
        long opts: --format <format>

- variable object display controls for depth, pointer depth, wether to show
  types, show summary, show location, flat output, use objc "po" style summary.
  
Modified ValueObjectMemory to be able to be created either with a TypeSP or
a ClangASTType.

Switched "memory read" over to use OptionGroup subclasses: one for the outfile
options, one for the command specific options, and one for the format.

llvm-svn: 130334
2011-04-27 22:04:39 +00:00
Greg Clayton 79ea878bf9 Got the EmulateInstruction CFI code a lot closer to producing CFI data.
Switch the EmulateInstruction to use the standard RegisterInfo structure
that is defined in the lldb private types intead of passing the reg kind and
reg num everywhere. EmulateInstruction subclasses also need to provide
RegisterInfo structs given a reg kind and reg num. This eliminates the need
for the GetRegisterName() virtual function and allows more complete information
to be passed around in the read/write register callbacks. Subclasses should
always provide RegiterInfo structs with the generic register info filled in as
well as at least one kind of register number in the RegisterInfo.kinds[] array.

llvm-svn: 130256
2011-04-26 23:48:45 +00:00
Greg Clayton 2ed751bd47 Changed the emulate instruction function to take emulate options which
are defined as enumerations. Current bits include:

        eEmulateInstructionOptionAutoAdvancePC
        eEmulateInstructionOptionIgnoreConditions

Modified the EmulateInstruction class to have a few more pure virtuals that
can help clients understand how many instructions the emulator can handle:

        virtual bool
        SupportsEmulatingIntructionsOfType (InstructionType inst_type) = 0;


Where instruction types are defined as:

//------------------------------------------------------------------
/// Instruction types
//------------------------------------------------------------------    
typedef enum InstructionType
{
    eInstructionTypeAny,                // Support for any instructions at all (at least one)
    eInstructionTypePrologueEpilogue,   // All prologue and epilogue instructons that push and pop register values and modify sp/fp
    eInstructionTypePCModifying,        // Any instruction that modifies the program counter/instruction pointer
    eInstructionTypeAll                 // All instructions of any kind

}  InstructionType;


This allows use to tell what an emulator can do and also allows us to request
these abilities when we are finding the plug-in interface.

Added the ability for an EmulateInstruction class to get the register names
for any registers that are part of the emulation. This helps with being able
to dump and log effectively.

The UnwindAssembly class now stores the architecture it was created with in
case it is needed later in the unwinding process.

Added a function that can tell us DWARF register names for ARM that goes
along with the source/Utility/ARM_DWARF_Registers.h file: 

        source/Utility/ARM_DWARF_Registers.c
        
Took some of plug-ins out of the lldb_private namespace.

llvm-svn: 130189
2011-04-26 04:39:08 +00:00
Greg Clayton 7be2542fc9 Renamed UnwindAssemblyProfiler to UnwindAssembly along with its source files.
llvm-svn: 130156
2011-04-25 21:14:26 +00:00
Greg Clayton 7e14f91dbd Fixed the SymbolContext::DumpStopContext() to correctly indent and dump
inline contexts when the deepest most block is not inlined.

Added source path remappings to the lldb_private::Target class that allow it
to remap paths found in debug info so we can find source files that are elsewhere
on the current system.

Fixed disassembly by function name to disassemble inline functions that are
inside other functions much better and to show enough context before the
disassembly output so you can tell where things came from.

Added the ability to get more than one address range from a SymbolContext 
class for the case where a block or function has discontiguous address ranges.

llvm-svn: 130044
2011-04-23 02:04:55 +00:00
Jim Ingham 58b59f9522 Fix up how the ValueObjects manage their life cycle so that you can hand out a shared
pointer to a ValueObject or any of its dependent ValueObjects, and the whole cluster will
stay around as long as that shared pointer stays around.

llvm-svn: 130035
2011-04-22 23:53:53 +00:00
Caroline Tice de2fb9cf76 Change code for reading emulation data files to read the new file
format.  (The newly formatted files will go in as a separate commit in a
few minutes).

llvm-svn: 129981
2011-04-22 05:08:45 +00:00
Greg Clayton 385aa28cf6 Did some work on the "register read" command to only show the first register
set by default when dumping registers. If you want to see all of the register
sets you can use the "--all" option:

(lldb) register read --all

If you want to just see some register sets, you can currently specify them
by index:

(lldb) register read --set 0 --set 2

We need to get shorter register set names soon so we can specify the register
sets by name without having to type too much. I will make this change soon.

You can also have any integer encoded registers resolve the address values
back to any code or data from the object files using the "--lookup" option.
Below is sample output when stopped in the libc function "puts" with some
const strings in registers:

Process 8973 stopped
* thread : tid = 0x2c03, 0x00007fff828fa30f libSystem.B.dylib`puts + 1, stop reason = instruction step into
  frame : 0x00007fff828fa30f libSystem.B.dylib`puts + 1
(lldb) register read --lookup 
General Purpose Registers:
  rax          = 0x0000000100000e98  "----------------------------------------------------------------------"
  rbx          = 0x0000000000000000
  rcx          = 0x0000000000000001  
  rdx          = 0x0000000000000000
  rdi          = 0x0000000100000e98  "----------------------------------------------------------------------"
  rsi          = 0x0000000100800000
  rbp          = 0x00007fff5fbff710
  rsp          = 0x00007fff5fbff280
  r8           = 0x0000000000000040  
  r9           = 0x0000000000000000
  r10          = 0x0000000000000000
  r11          = 0x0000000000000246  
  r12          = 0x0000000000000000
  r13          = 0x0000000000000000
  r14          = 0x0000000000000000
  r15          = 0x0000000000000000
  rip          = 0x00007fff828fa30f  libSystem.B.dylib`puts + 1
  rflags       = 0x0000000000000246  
  cs           = 0x0000000000000027  
  fs           = 0x0000000000000000
  gs           = 0x0000000000000000

As we can see, we see two constant strings and the PC (register "rip") is 
showing the code it resolves to.

I fixed the register "--format" option to work as expected.

Added a setting to disable skipping the function prologue when setting 
breakpoints as a target settings variable:

(lldb) settings set target.skip-prologue false

Updated the user settings controller boolean value handler funciton to be able
to take the default value so it can correctly respond to the eVarSetOperationClear
operation.

Did some usability work on the OptionValue classes.

Fixed the "image lookup" command to correctly respond to the "--verbose" 
option and display the detailed symbol context information when looking up
line table entries and functions by name. This previously was only working
for address lookups.

llvm-svn: 129977
2011-04-22 03:55:06 +00:00
Johnny Chen ea80ba8b97 Use self.TraceOn() API to decide whether to print debug output.
llvm-svn: 129935
2011-04-21 20:27:45 +00:00
Caroline Tice 3ac6711aec Add the infrastructure to test instruction emulations automatically.
The idea is that the instruction to be emulated is actually executed
on the hardware to be emulated, with the before and after state of the
hardware being captured and 'freeze-dried' into .dat files.  The
emulation testing code then loads the before & after state from the
.dat file, emulates the instruction using the before state, and
compares the resulting state to the 'after' state.  If they match, the
emulation is accurate, otherwise there is a problem.

The final format of the .dat files needs a bit more work; the plan is
to generalize them a bit and to convert the plain values to key-value pairs. 
But I wanted to get this first pass committed.

This commit adds arm instruction emulation testing to the testsuite, along with
many initial .dat files.

It also fixes a bug in the llvm disassembler, where 32-bit thumb opcodes
were getting their upper & lower 16-bits reversed.

There is a new Instruction sub-class, that is intended to be loaded
from a .dat file rather than read from an executable.  There is also a
new EmulationStateARM class, for handling the before & after states.
EmulationStates for other architetures can be added later when we
emulate their instructions.

llvm-svn: 129832
2011-04-19 23:30:03 +00:00
Greg Clayton 4c20717a8f General cleanup on the UserSettingsController stuff. There were 5 different
places that were dumping values for the settings. Centralized all of the
value dumping into a single place. When dumping values that aren't strings
we no longer surround the value with single quotes. When dumping values that
are strings, surround the string value with double quotes. When dumping array
values, assume they are always string values, and don't put quotes around
dictionary values.

llvm-svn: 129826
2011-04-19 22:32:36 +00:00
Greg Clayton 176761e530 Added a new option to the "source list" command that allows us to see where
line tables specify breakpoints can be set in the source. When dumping the
source, the number of breakpoints that can be set on a source line are shown
as a prefix:

(lldb) source list -f test.c -l1 -c222 -b
       1   	#include <stdio.h>
       2   	#include <sys/fcntl.h>
       3   	#include <unistd.h>
       4   	int
       5   	sleep_loop (const int num_secs)
[2]    6   	{
       7   	    int i;
[1]    8   	    for (i=0; i<num_secs; ++i)
       9   	    {
[1]    10  	        printf("%d of %i - sleep(1);\n", i, num_secs);
[1]    11  	        sleep(1);       
       12  	    }
       13  	    return 0;
[1]    14  	}
       15  	
       16  	int 
       17  	main (int argc, char const* argv[])
[1]    18  	{
[1]    19  	    printf("Process: %i\n\n", getpid());
[1]    20  	    puts("Press any key to continue..."); getchar();
[1]    21  	    sleep_loop (20);
       22  	    return 12;
[1]    23  	}

Above we can see there are two breakpoints for line 6 and one breakpoint for
lines 8, 10, 11, 14, 18, 19, 20, 21 and 23. All other lines have no line table
entries for them. This helps visualize the data provided in the debug 
information without having to manually dump all line tables. It also includes
all inline breakpoint that may result for a given file which can also be very
handy to see.

llvm-svn: 129747
2011-04-19 04:19:37 +00:00
Greg Clayton 7260f6206f Centralized a lot of the status information for processes,
threads, and stack frame down in the lldb_private::Process,
lldb_private::Thread, lldb_private::StackFrameList and the 
lldb_private::StackFrame classes. We had some command line
commands that had duplicate versions of the process status
output ("thread list" and "process status" for example). 

Removed the "file" command and placed it where it should
have been: "target create". Made an alias for "file" to
"target create" so we stay compatible with GDB commands.

We can now have multple usable targets in lldb at the
same time. This is nice for comparing two runs of a program
or debugging more than one binary at the same time. The
new command is "target select <target-idx>" and also to see
a list of the current targets you can use the new "target list"
command. The flow in a debug session can be:

(lldb) target create /path/to/exe/a.out
(lldb) breakpoint set --name main
(lldb) run
... hit breakpoint
(lldb) target create /bin/ls
(lldb) run /tmp
Process 36001 exited with status = 0 (0x00000000) 
(lldb) target list
Current targets:
  target : /tmp/args/a.out ( arch=x86_64-apple-darwin, platform=localhost, pid=35999, state=stopped )
* target : /bin/ls ( arch=x86_64-apple-darwin, platform=localhost, pid=36001, state=exited )
(lldb) target select 0
Current targets:
* target : /tmp/args/a.out ( arch=x86_64-apple-darwin, platform=localhost, pid=35999, state=stopped )
  target : /bin/ls ( arch=x86_64-apple-darwin, platform=localhost, pid=36001, state=exited )
(lldb) bt
* thread : tid = 0x2d03, 0x0000000100000b9a a.out`main + 42 at main.c:16, stop reason = breakpoint 1.1
  frame : 0x0000000100000b9a a.out`main + 42 at main.c:16
  frame : 0x0000000100000b64 a.out`start + 52

Above we created a target for "a.out" and ran and hit a
breakpoint at "main". Then we created a new target for /bin/ls
and ran it. Then we listed the targest and selected our original
"a.out" program, so we showed two concurent debug sessions
going on at the same time.

llvm-svn: 129695
2011-04-18 08:33:37 +00:00
Jim Ingham 78a685aa2d Add support for "dynamic values" for C++ classes. This currently only works for "frame var" and for the
expressions that are simple enough to get passed to the "frame var" underpinnings.  The parser code will
have to be changed to also query for the dynamic types & offsets as it is looking up variables.

The behavior of "frame var" is controlled in two ways.  You can pass "-d {true/false} to the frame var
command to get the dynamic or static value of the variables you are printing.

There's also a general setting:

target.prefer-dynamic-value (boolean) = 'true'

which is consulted if you call "frame var" without supplying a value for the -d option.

llvm-svn: 129623
2011-04-16 00:01:13 +00:00
Greg Clayton ab65b34fdc Added auto completion for architecture names and for platforms.
Modified the OptionGroupOptions to be able to specify only some of the options
that should be appended by using the usage_mask in the group defintions and
also provided a way to remap them to a new usage mask after the copy. This 
allows options to be re-used and also targetted for specific option groups.

Modfied the CommandArgumentType to have a new eArgTypePlatform enumeration.
Taught the option parser to be able to automatically use the appropriate
auto completion for a given options if nothing is explicitly specified
in the option definition. So you don't have to specify it in the option
definition tables.

Renamed the default host platform name to "host", and the default platform
hostname to be "localhost".

Modified the "file" and "platform select" commands to make sure all options
and args are good prior to creating a new platform. Also defer the computation
of the architecture in the file command until all options are parsed and the
platform has either not been specified or reset to a new value to avoid
computing the arch more than once.

Switch the PluginManager code over to using llvm::StringRef for string
comparisons and got rid of all the AccessorXXX functions in lieu of the newer
mutex + collection singleton accessors.

llvm-svn: 129483
2011-04-13 22:47:15 +00:00
Greg Clayton 8b82f087a0 Moved the execution context that was in the Debugger into
the CommandInterpreter where it was always being used.

Make sure that Modules can track their object file offsets correctly to
allow opening of sub object files (like the "__commpage" on darwin).

Modified the Platforms to be able to launch processes. The first part of this
move is the platform soon will become the entity that launches your program
and when it does, it uses a new ProcessLaunchInfo class which encapsulates
all process launching settings. This simplifies the internal APIs needed for
launching. I want to slowly phase out process launching from the process
classes, so for now we can still launch just as we used to, but eventually
the platform is the object that should do the launching.

Modified the Host::LaunchProcess in the MacOSX Host.mm to correctly be able
to launch processes with all of the new eLaunchFlag settings. Modified any
code that was manually launching processes to use the Host::LaunchProcess
functions.

Fixed an issue where lldb_private::Args had implicitly defined copy 
constructors that could do the wrong thing. This has now been fixed by adding
an appropriate copy constructor and assignment operator.

Make sure we don't add empty ModuleSP entries to a module list.

Fixed the commpage module creation on MacOSX, but we still need to train
the MacOSX dynamic loader to not get rid of it when it doesn't have an entry
in the all image infos.

Abstracted many more calls from in ProcessGDBRemote down into the 
GDBRemoteCommunicationClient subclass to make the classes cleaner and more
efficient.

Fixed the default iOS ARM register context to be correct and also added support
for targets that don't support the qThreadStopInfo packet by selecting the
current thread (only if needed) and then sending a stop reply packet.

Debugserver can now start up with a --unix-socket (-u for short) and can 
then bind to port zero and send the port it bound to to a listening process
on the other end. This allows the GDB remote platform to spawn new GDB server
instances (debugserver) to allow platform debugging.

llvm-svn: 129351
2011-04-12 05:54:46 +00:00
Stephen Wilson 71c21d18c3 Order of initialization lists.
This patch fixes all of the warnings due to unordered initialization lists.

Patch by Marco Minutoli.

llvm-svn: 129290
2011-04-11 19:41:40 +00:00
Caroline Tice 25d61ac2ed Fix various things in the instruction emulation code:
- Add ability to control whether or not the emulator advances the
    PC register (in the emulation state), if the instruction itself
    does not change the pc value..

    - Fix a few typos in asm description strings.

    - Fix bug in the carry flag calculation.

llvm-svn: 129168
2011-04-08 23:33:06 +00:00
Stephen Wilson 8acdbb8a75 Add missing headers.
Something changed in commit r129112 where a few standard headers vanished from
the include chain when building on Linux.  Fix up by including limits.h for
INT_MAX and PATH_MAX where needed, and stdio.h for printf().

llvm-svn: 129130
2011-04-08 13:36:44 +00:00
Greg Clayton eb0103f2d0 Modified the ArchSpec to take an optional "Platform *" when setting the triple.
This allows you to have a platform selected, then specify a triple using
"i386" and have the remaining triple items (vendor, os, and environment) set
automatically.

Many interpreter commands take the "--arch" option to specify an architecture
triple, so now the command options needed to be able to get to the current
platform, so the Options class now take a reference to the interpreter on
construction.

Modified the build LLVM building in the Xcode project to use the new
Xcode project level user definitions:

LLVM_BUILD_DIR - a path to the llvm build directory
LLVM_SOURCE_DIR - a path to the llvm sources for the llvm that will be used to build lldb
LLVM_CONFIGURATION - the configuration that lldb is built for (Release, 
Release+Asserts, Debug, Debug+Asserts).

I also changed the LLVM build to not check if "lldb/llvm" is a symlink and
then assume it is a real llvm build directory versus the unzipped llvm.zip
package, so now you can actually have a "lldb/llvm" directory in your lldb
sources.

llvm-svn: 129112
2011-04-07 22:46:35 +00:00
Caroline Tice c1bcafd8c1 Translate dwarf register numbers to internal register numbers
before trying to look them up in register contexts, in the 
emulation callback functions that read & write the frame registers.

llvm-svn: 129037
2011-04-06 23:30:18 +00:00
Caroline Tice 7c9dd3ce3c Add Emulate and DumpEmulation to Instruction class.
Move InstructionLLVM out of DisassemblerLLVM class.

Add instruction emulation function calls to SBInstruction and SBInstructionList APIs.

llvm-svn: 128956
2011-04-05 23:22:54 +00:00
Caroline Tice 3d50b2f7a6 Convert "process" read/write callback functions to "frame" read/write callback functions.
llvm-svn: 128917
2011-04-05 20:18:48 +00:00
Caroline Tice ad379efc86 Add the rest of the mechanisms to make ARM instruction emulation usable/possible.
llvm-svn: 128907
2011-04-05 18:46:00 +00:00
Greg Clayton 9b1e1cdf23 Added a speed test to the GDBRemoteCommunicationClient and
GDBRemoteCommunicationServer classes. This involved adding a new packet
named "qSpeedTest" which can test the speed of a packet send/response pairs
using a wide variety of send/recv packet sizes.

Added a few new connection classes: one for shared memory, and one for using
mach messages (Apple only). The mach message stuff is experimental and not 
working yet, but added so I don't lose the code. The shared memory stuff
uses pretty standard calls to setup shared memory.

llvm-svn: 128837
2011-04-04 18:18:57 +00:00
Greg Clayton ac4827fe05 Get rid of LONG_LONG_MAX and ULONG_LONG_MAX, and use LLONG_MAX and ULLONG_MAX
respectively.

llvm-svn: 128720
2011-04-01 18:14:08 +00:00
Greg Clayton 95bf0fd3ab Added the ability to get a broadcaster event name for a given broadcaster
event.

Modified the ProcessInfo structure to contain all process arguments. Using the
new function calls on MacOSX allows us to see the full process name, not just
the first 16 characters. 

Added a new platform command: "platform process info <pid> [<pid> <pid> ...]"
that can be used to get detailed information for a process including all 
arguments, user and group info and more.

llvm-svn: 128694
2011-04-01 00:29:43 +00:00
Jim Ingham 8d543de400 Remove unneeded ExecutionContextScope variables.
llvm-svn: 128685
2011-03-31 23:01:21 +00:00
Greg Clayton 05d2b7f741 Added some functions to our API related to classifying symbols as code, data,
const data, etc, and also for SBAddress objects to classify their type of
section they are in and also getting the module for a section offset address.

    lldb::SymbolType SBSymbol::GetType();
    
    lldb::SectionType SBAddress::GetSectionType ();
    lldb::SBModule SBAddress::GetModule ();

llvm-svn: 128602
2011-03-31 01:08:07 +00:00
Jim Ingham 6035b67d2c Convert ValueObject to explicitly maintain the Execution Context in which they were created, and then use that when they update themselves. That means all the ValueObject evaluate me type functions that used to require a Frame object now do not. I didn't remove the SBValue API's that take this now useless frame, but I added ones that don't require the frame, and marked the SBFrame taking ones as deprecated.
llvm-svn: 128593
2011-03-31 00:19:25 +00:00
Greg Clayton 32e0a7509c Many improvements to the Platform base class and subclasses. The base Platform
class now implements the Host functionality for a lot of things that make 
sense by default so that subclasses can check:

int
PlatformSubclass::Foo ()
{
    if (IsHost())
        return Platform::Foo (); // Let the platform base class do the host specific stuff
    
    // Platform subclass specific code...
    int result = ...
    return result;
}

Added new functions to the platform:

    virtual const char *Platform::GetUserName (uint32_t uid);
    virtual const char *Platform::GetGroupName (uint32_t gid);

The user and group names are cached locally so that remote platforms can avoid
sending packets multiple times to resolve this information.

Added the parent process ID to the ProcessInfo class. 

Added a new ProcessInfoMatch class which helps us to match processes up
and changed the Host layer over to using this new class. The new class allows
us to search for processs:
1 - by name (equal to, starts with, ends with, contains, and regex)
2 - by pid
3 - And further check for parent pid == value, uid == value, gid == value, 
    euid == value, egid == value, arch == value, parent == value.
    
This is all hookup up to the "platform process list" command which required
adding dumping routines to dump process information. If the Host class 
implements the process lookup routines, you can now lists processes on 
your local machine:

machine1.foo.com % lldb
(lldb) platform process list 
PID    PARENT USER       GROUP      EFF USER   EFF GROUP  TRIPLE                   NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99538  1      username   usergroup  username   usergroup  x86_64-apple-darwin      FileMerge
94943  1      username   usergroup  username   usergroup  x86_64-apple-darwin      mdworker
94852  244    username   usergroup  username   usergroup  x86_64-apple-darwin      Safari
94727  244    username   usergroup  username   usergroup  x86_64-apple-darwin      Xcode
92742  92710  username   usergroup  username   usergroup  i386-apple-darwin        debugserver


This of course also works remotely with the lldb-platform:

machine1.foo.com % lldb-platform --listen 1234

machine2.foo.com % lldb
(lldb) platform create remote-macosx
  Platform: remote-macosx
 Connected: no
(lldb) platform connect connect://localhost:1444
  Platform: remote-macosx
    Triple: x86_64-apple-darwin
OS Version: 10.6.7 (10J869)
    Kernel: Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
  Hostname: machine1.foo.com
 Connected: yes
(lldb) platform process list 
PID    PARENT USER       GROUP      EFF USER   EFF GROUP  TRIPLE                   NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99556  244    username   usergroup  username   usergroup  x86_64-apple-darwin      trustevaluation
99548  65539  username   usergroup  username   usergroup  x86_64-apple-darwin      lldb
99538  1      username   usergroup  username   usergroup  x86_64-apple-darwin      FileMerge
94943  1      username   usergroup  username   usergroup  x86_64-apple-darwin      mdworker
94852  244    username   usergroup  username   usergroup  x86_64-apple-darwin      Safari

The lldb-platform implements everything with the Host:: layer, so this should
"just work" for linux. I will probably be adding more stuff to the Host layer
for launching processes and attaching to processes so that this support should
eventually just work as well.

Modified the target to be able to be created with an architecture that differs
from the main executable. This is needed for iOS debugging since we can have
an "armv6" binary which can run on an "armv7" machine, so we want to be able
to do:

% lldb
(lldb) platform create remote-ios
(lldb) file --arch armv7 a.out

Where "a.out" is an armv6 executable. The platform then can correctly decide
to open all "armv7" images for all dependent shared libraries.

Modified the disassembly to show the current PC value. Example output:

(lldb) disassemble --frame
a.out`main:
   0x1eb7:  pushl  %ebp
   0x1eb8:  movl   %esp, %ebp
   0x1eba:  pushl  %ebx
   0x1ebb:  subl   $20, %esp
   0x1ebe:  calll  0x1ec3                   ; main + 12 at test.c:18
   0x1ec3:  popl   %ebx
-> 0x1ec4:  calll  0x1f12                   ; getpid
   0x1ec9:  movl   %eax, 4(%esp)
   0x1ecd:  leal   199(%ebx), %eax
   0x1ed3:  movl   %eax, (%esp)
   0x1ed6:  calll  0x1f18                   ; printf
   0x1edb:  leal   213(%ebx), %eax
   0x1ee1:  movl   %eax, (%esp)
   0x1ee4:  calll  0x1f1e                   ; puts
   0x1ee9:  calll  0x1f0c                   ; getchar
   0x1eee:  movl   $20, (%esp)
   0x1ef5:  calll  0x1e6a                   ; sleep_loop at test.c:6
   0x1efa:  movl   $12, %eax
   0x1eff:  addl   $20, %esp
   0x1f02:  popl   %ebx
   0x1f03:  leave
   0x1f04:  ret
   
This can be handy when dealing with the new --line options that was recently
added:

(lldb) disassemble --line
a.out`main + 13 at test.c:19
   18  	{
-> 19  		printf("Process: %i\n\n", getpid());
   20  	    puts("Press any key to continue..."); getchar();
-> 0x1ec4:  calll  0x1f12                   ; getpid
   0x1ec9:  movl   %eax, 4(%esp)
   0x1ecd:  leal   199(%ebx), %eax
   0x1ed3:  movl   %eax, (%esp)
   0x1ed6:  calll  0x1f18                   ; printf

Modified the ModuleList to have a lookup based solely on a UUID. Since the
UUID is typically the MD5 checksum of a binary image, there is no need
to give the path and architecture when searching for a pre-existing
image in an image list.

Now that we support remote debugging a bit better, our lldb_private::Module
needs to be able to track what the original path for file was as the platform
knows it, as well as where the file is locally. The module has the two 
following functions to retrieve both paths:

const FileSpec &Module::GetFileSpec () const;
const FileSpec &Module::GetPlatformFileSpec () const;

llvm-svn: 128563
2011-03-30 18:16:51 +00:00
Greg Clayton 357132eb9a Added the ability to get the min and max instruction byte size for
an architecture into ArchSpec:

uint32_t
ArchSpec::GetMinimumOpcodeByteSize() const;

uint32_t
ArchSpec::GetMaximumOpcodeByteSize() const;

Added an AddressClass to the Instruction class in Disassembler.h.
This allows decoded instructions to know know if they are code,
code with alternate ISA (thumb), or even data which can be mixed
into code. The instruction does have an address, but it is a good
idea to cache this value so we don't have to look it up more than 
once.

Fixed an issue in Opcode::SetOpcodeBytes() where the length wasn't
getting set.

Changed:

	bool
	SymbolContextList::AppendIfUnique (const SymbolContext& sc);

To:
	bool
	SymbolContextList::AppendIfUnique (const SymbolContext& sc, 
									   bool merge_symbol_into_function);

This function was typically being used when looking up functions
and symbols. Now if you lookup a function, then find the symbol,
they can be merged into the same symbol context and not cause
multiple symbol contexts to appear in a symbol context list that
describes the same function.

Fixed the SymbolContext not equal operator which was causing mixed
mode disassembly to not work ("disassembler --mixed --name main").

Modified the disassembler classes to know about the fact we know,
for a given architecture, what the min and max opcode byte sizes
are. The InstructionList class was modified to return the max
opcode byte size for all of the instructions in its list.
These two fixes means when disassemble a list of instructions and dump 
them and show the opcode bytes, we can format the output more 
intelligently when showing opcode bytes. This affects any architectures
that have varying opcode byte sizes (x86_64 and i386). Knowing the max
opcode byte size also helps us to be able to disassemble N instructions
without having to re-read data if we didn't read enough bytes.

Added the ability to set the architecture for the disassemble command.
This means you can easily cross disassemble data for any supported 
architecture. I also added the ability to specify "thumb" as an 
architecture so that we can force disassembly into thumb mode when
needed. In GDB this was done using a hack of specifying an odd
address when disassembling. I don't want to repeat this hack in LLDB,
so the auto detection between ARM and thumb is failing, just specify
thumb when disassembling:

(lldb) disassemble --arch thumb --name main

You can also have data in say an x86_64 file executable and disassemble
data as any other supported architecture:
% lldb a.out
Current executable set to 'a.out' (x86_64).
(lldb) b main
(lldb) run
(lldb) disassemble --arch thumb --count 2 --start-address 0x0000000100001080 --bytes
0x100001080:  0xb580 push   {r7, lr}
0x100001082:  0xaf00 add    r7, sp, 

Fixed Target::ReadMemory(...) to be able to deal with Address argument object
that isn't section offset. When an address object was supplied that was
out on the heap or stack, target read memory would fail. Disassembly uses
Target::ReadMemory(...), and the example above where we disassembler thumb
opcodes in an x86 binary was failing do to this bug.

llvm-svn: 128347
2011-03-26 19:14:58 +00:00
Greg Clayton 1080edbcdd Cleaned up the Disassembler code a bit more. You can now request a disassembler
plugin by name on the command line for when there is more than one disassembler
plugin.

Taught the Opcode class to dump itself so that "disassembler -b" will dump
the bytes correctly for each opcode type. Modified all places that were passing
the opcode bytes buffer in so that the bytes could be displayed to just pass
in a bool that indicates if we should dump the opcode bytes since the opcode
now lives inside llvm_private::Instruction.

llvm-svn: 128290
2011-03-25 18:03:16 +00:00
Greg Clayton 0ae962735f Made the lldb_private::Opcode struct into a real boy... I mean class.
Modified the Disassembler::Instruction base class to contain an Opcode 
instance so that we can know the bytes for an instruction without needing
to keep the data around.

Modified the DisassemblerLLVM's instruction class to correctly extract the
opcode bytes if all goes well.

llvm-svn: 128248
2011-03-24 23:53:38 +00:00
Greg Clayton e0d378b334 Fixed the LLDB build so that we can have private types, private enums and
public types and public enums. This was done to keep the SWIG stuff from
parsing all sorts of enums and types that weren't needed, and allows us to
abstract our API better.

llvm-svn: 128239
2011-03-24 21:19:54 +00:00
Greg Clayton 1cb6496eb0 Did a lot more work on abtracting and organizing the platforms.
On Mac OS X we now have 3 platforms:
PlatformDarwin - must be subclassed to fill in the missing pure virtual funcs
                 but this implements all the common functionality between
                 remote-macosx and remote-ios. It also allows for another
                 platform to be used (remote-gdb-server for now) when doing
                 remote connections. Keeping this pluggable will allow for
                 flexibility.
PlatformMacOSX - Now implements both local and remote macosx desktop platforms.
PlatformRemoteiOS - Remote only iOS that knows how to locate SDK files in the
                    cached SDK locations on the host.

A new agnostic platform has been created:
PlatformRemoteGDBServer - this implements the platform using the GDB remote 
                          protocol and uses the built in lldb_private::Host
                          static functions to implement many queries.

llvm-svn: 128193
2011-03-24 04:28:38 +00:00
Jim Ingham 37023b06bd Add the ability to disassemble "n" instructions from the current PC, or the first "n" instructions in a function.
Also added a "-p" flag that disassembles from the current pc.

llvm-svn: 128063
2011-03-22 01:48:42 +00:00
Greg Clayton 7a5388bf75 Split all of the core of LLDB.framework/lldb.so into a
static archive that can be linked against. LLDB.framework/lldb.so
exports a very controlled API. Splitting the API into a static
library allows other tools (debugserver for now) to use the power
of the LLDB debugger core, yet not export it as its API is not
portable or maintainable. The Host layer and many of the other
internal only APIs can now be statically linked against.

Now LLDB.framework/lldb.so links against "liblldb-core.a" instead
of compiling the .o files only for the shared library. This fix
is only for compiling with Xcode as the Makefile based build already
does this.

The Xcode projecdt compiler has been changed to LLVM. Anyone using
Xcode 3 will need to manually change the compiler back to GCC 4.2,
or update to Xcode 4.

llvm-svn: 127963
2011-03-20 04:57:14 +00:00
Greg Clayton ded470d31a Added more platform support. There are now some new commands:
platform status -- gets status information for the selected platform
platform create <platform-name> -- creates a new instance of a remote platform
platform list -- list all available platforms
platform select -- select a platform instance as the current platform (not working yet)

When using "platform create" it will create a remote platform and make it the
selected platform. For instances for iPhone OS debugging on Mac OS X one can 
do:

(lldb) platform create remote-ios --sdk-version=4.0
Remote platform: iOS platform
SDK version: 4.0
SDK path: "/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0"
Not connected to a remote device.
(lldb) file ~/Documents/a.out
Current executable set to '~/Documents/a.out' (armv6).
(lldb) image list
[  0] /Volumes/work/gclayton/Documents/devb/attach/a.out
[  1] /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/usr/lib/dyld
[  2] /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/usr/lib/libSystem.B.dylib


Note that this is all happening prior to running _or_ connecting to a remote
platform. Once connected to a remote platform the OS version might change which
means we will need to update our dependecies. Also once we run, we will need
to match up the actualy binaries with the actualy UUID's to files in the
SDK, or download and cache them locally.

This is just the start of the remote platforms, but this modification is the
first iteration in getting the platforms really doing something.

llvm-svn: 127934
2011-03-19 01:12:21 +00:00