This avoids unnecessary expansion of expressions and allows the SCEV
expander to work on expression DAGs, not just trees.
Fixes PR11090.
llvm-svn: 141870
IVs.
Indvars previously chose randomly between congruent IVs. Now it will
bias the decision toward IVs that SCEVExpander likes to create. This
was not done to fix any problem, it's just a welcome side effect of
factoring code.
llvm-svn: 141633
related bug fixes and corresponding assertions for uninitialized data
and missing NULL check. Test cases will be included with the new LFTR.
llvm-svn: 135333
properties.
Added the self-wrap flag for SCEV::AddRecExpr.
A slew of temporary FIXMEs indicate the intention of the no-self-wrap flag
without changing behavior in this revision.
llvm-svn: 127590
it inserted rather than using LoopInfo::getCanonicalInductionVariable to
rediscover it, since that doesn't work on non-canonical loops. This fixes
infinite recurrsion on such loops; PR7562.
llvm-svn: 109419
doesn't dominate the header is needed, don't check whether the increment
expression has computable loop evolution. While the operands of an
addrec are required to be loop-invariant, they're not required to
dominate any part of the loop. This fixes PR6914.
llvm-svn: 102389
explicitly split into stride-and-offset pairs. Also, add the
ability to track multiple post-increment loops on the same expression.
This refines the concept of "normalizing" SCEV expressions used for
to post-increment uses, and introduces a dedicated utility routine for
normalizing and denormalizing expressions.
This fixes the expansion of expressions which are post-increment users
of more than one loop at a time. More broadly, this takes LSR another
step closer to being able to reason about more than one loop at a time.
llvm-svn: 100699
use-before-def errors in SCEVExpander-produced code in sqlite3 when debug
info with optimization is enabled, though the testcases for this are
dependent on use-list order.
llvm-svn: 99001
pointer and length, and allocate the arrays in ScalarEvolution's
BumpPtrAllocator, so that they get released when their owning
SCEV gets released. SCEVs are immutable, so they don't need to worry
about operand array resizing. This fixes a memory leak reported
in PR6637.
llvm-svn: 98755
case where there are loop-invariant instructions somehow left
inside the loop, and in a position where they won't dominate
the IV increment position.
llvm-svn: 96448
insert location has become an "inserted" instruction since the time
it was saved. If so, advance to the first non-"inserted" instruction.
llvm-svn: 96203
current insertion point, advance the current insertion point.
This avoids a use-before-def situation in a testcase extracted
from clang which is difficult to reduce to a reasonable-sized
regression test.
llvm-svn: 96151
bug fixes, and with improved heuristics for analyzing foreign-loop
addrecs.
This change also flattens IVUsers, eliminating the stride-oriented
groupings, which makes it easier to work with.
llvm-svn: 95975
cases, and implement target-independent folding rules for alignof and
offsetof. Also, reassociate reassociative operators when it leads to
more folding.
Generalize ScalarEvolution's isOffsetOf to recognize offsetof on
arrays. Rename getAllocSizeExpr to getSizeOfExpr, and getFieldOffsetExpr
to getOffsetOfExpr, for consistency with analagous ConstantExpr routines.
Make the target-dependent folder promote GEP array indices to
pointer-sized integers, to make implicit casting explicit and exposed
to subsequent folding.
And add a bunch of testcases for this new functionality, and a bunch
of related existing functionality.
llvm-svn: 94987
use plain SCEVUnknowns with ConstantExpr::getSizeOf and
ConstantExpr::getOffsetOf constants. This eliminates a bunch of
special-case code.
Also add code for pattern-matching these expressions, for clients that
want to recognize them.
Move ScalarEvolution's logic for expanding array and vector sizeof
expressions into an element count times the element size, to expose
the multiplication to subsequent folding, into the regular constant
folder.
llvm-svn: 94737
This new version is much more aggressive about doing "full" reduction in
cases where it reduces register pressure, and also more aggressive about
rewriting induction variables to count down (or up) to zero when doing so
reduces register pressure.
It currently uses fairly simplistic algorithms for finding reuse
opportunities, but it introduces a new framework allows it to combine
multiple strategies at once to form hybrid solutions, instead of doing
all full-reduction or all base+index.
llvm-svn: 94061
aren't in canonical loop-simplify form, since it doesn't itself depend
on LoopSimplify. This means handling loops without preheaders and loops
with multiple backedges.
llvm-svn: 82905
TargetData is not present. It still uses TargetData when available.
This generalization also fixed some limitations in the TargetData
case; the attached testcase covers this.
llvm-svn: 79344
the operands have pointer type, so that the resulting type matches
the original SCEV type, and so that unnecessary ptrtoints are
avoided in common cases.
llvm-svn: 75680
This helps it avoid reusing an instruction that doesn't dominate all
of the users, in cases where the original instruction was inserted
before all of the users were known. This may result in redundant
expansions of sub-expressions that depend on loop-unpredictable values
in some cases, however this isn't very common, and it primarily impacts
IndVarSimplify, so GVN can be expected to clean these up.
This eliminates the need for IndVarSimplify's FixUsesBeforeDefs,
which fixes several bugs.
llvm-svn: 74352
trip counts in more cases.
Generalize ScalarEvolution's isLoopGuardedByCond code to recognize
And and Or conditions, splitting the code out into an
isNecessaryCond helper function so that it can evaluate Ands and Ors
recursively, and make SCEVExpander be much more aggressive about
hoisting instructions out of loops.
test/CodeGen/X86/pr3495.ll has an additional instruction now, but
it appears to be due to an arbitrary register allocation difference.
llvm-svn: 74048
failures.
To support this, add some utility functions to Type to help support
vector/scalar-independent code. Change ConstantInt::get and
ConstantFP::get to support vector types, and add an overload to
ConstantInt::get that uses a static IntegerType type, for
convenience.
Introduce a new getConstant method for ScalarEvolution, to simplify
common use cases.
llvm-svn: 73431
induction variable when the addrec to be expanded does not require
a wider type. This eliminates the need for IndVarSimplify to
micro-manage SCEV expansions, because SCEVExpander now
automatically expands them in the form that IndVarSimplify considers
to be canonical. (LSR still micro-manages its SCEV expansions,
because it's optimizing for the target, rather than for
other optimizations.)
Also, this uses the new getAnyExtendExpr, which has more clever
expression simplification logic than the IndVarSimplify code it
replaces, and this cleans up some ugly expansions in code such as
the included masked-iv.ll testcase.
llvm-svn: 73294
immediately casted. At present, this is just a minor code
simplification. In the future, the expansion code may be able
to make better choices if it knows what the desired result
type will be.
llvm-svn: 73137
possible. For example, it now emits
%p.2.ip.1 = getelementptr [3 x [3 x double]]* %p, i64 2, i64 %tmp, i64 1
instead of the equivalent but less obvious
%p.2.ip.1 = getelementptr [3 x [3 x double]]* %p, i64 0, i64 %tmp, i64 19
llvm-svn: 72452
sending SCEVUnknowns to expandAddToGEP. This avoids the need for
expandAddToGEP to bend the rules and peek into SCEVUnknown
expressions.
Factor out the code for testing whether a SCEV can be factored by
a constant for use in a GEP index. This allows it to handle
SCEVAddRecExprs, by recursing.
As a result, SCEVExpander can now put more things in GEP indices,
so it emits fewer explicit mul instructions.
llvm-svn: 72366
Fix by clearing the rewriter cache before deleting the trivially dead
instructions.
Also make InsertedExpressions use an AssertingVH to catch these
bugs easier.
llvm-svn: 72364
instructions. It attempts to create high-level multi-operand GEPs,
though in cases where this isn't possible it falls back to casting
the pointer to i8* and emitting a GEP with that. Using GEP instructions
instead of ptrtoint+arithmetic+inttoptr helps pointer analyses that
don't use ScalarEvolution, such as BasicAliasAnalysis.
Also, make the AddrModeMatcher more aggressive in handling GEPs.
Previously it assumed that operand 0 of a GEP would require a register
in almost all cases. It now does extra checking and can do more
matching if operand 0 of the GEP is foldable. This fixes a problem
that was exposed by SCEVExpander using GEPs.
llvm-svn: 72093
with the persistent insertion point, and change IndVars to make
use of it. This fixes a bug where IndVars was holding on to a
stale insertion point and forcing the SCEVExpander to continue to
use it.
This fixes PR4038.
llvm-svn: 69892
instructions in order to avoid inserting new ones. However, if
the cast instruction is the SCEVExpander's InsertPt, this
causes subsequently emitted instructions to be inserted near
the cast, and not at the location of the original insert point.
Fix this by adjusting the insert point in such cases.
This fixes PR4009.
llvm-svn: 69808
size from the integer, requiring zero extension or truncation. Don't
create ZExtInsts with pointer types. This fixes a regression in
consumer-jpeg.
llvm-svn: 69307
have pointer types, though in contrast to C pointer types, SCEV
addition is never implicitly scaled. This not only eliminates the
need for special code like IndVars' EliminatePointerRecurrence
and LSR's own GEP expansion code, it also does a better job because
it lets the normal optimizations handle pointer expressions just
like integer expressions.
Also, since LLVM IR GEPs can't directly index into multi-dimensional
VLAs, moving the GEP analysis out of client code and into the SCEV
framework makes it easier for clients to handle multi-dimensional
VLAs the same way as other arrays.
Some existing regression tests show improved optimization.
test/CodeGen/ARM/2007-03-13-InstrSched.ll in particular improved to
the point where if-conversion started kicking in; I turned it off
for this test to preserve the intent of the test.
llvm-svn: 69258
take into account the instrucion pointed by InsertPt. Thanks to it,
returning the new value of InsertPt to the InsertBinop() caller can be
avoided. The bug was, actually, in visitAddRecExpr() method which wasn't
correctly handling changes of InsertPt. There shouldn't be any
performance regression, as -gvn pass (run after -indvars) removes any
redundant binops.
llvm-svn: 52291
Add a safety measure. It isn't safe to assume in ScalarEvolutionExpander that
all loops are in canonical form (but it should be safe for loops that have
AddRecs).
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
llvm-svn: 52275
Parse reversed smax and umax as smin and umin and express them with negative
or binary-not SCEVs (which are really just subtract under the hood).
Parse 'xor %x, -1' as (-1 - %x).
Remove dead code (ConstantInt::get always returns a ConstantInt).
Don't use getIntegerSCEV(-1, Ty). The first value is an int, then it gets
passed into a uint64_t. Instead, create the -1 directly from
ConstantInt::getAllOnesValue().
llvm-svn: 47360
This created an ambiguity for expandInTy to decide when to use
sign-extension or zero-extension, but it turns out that most of its callers
don't actually need a type conversion, now that LLVM types don't have
explicit signedness. Drop expandInTy in favor of plain expand, and change
the few places that actually need a type conversion to do it themselves.
llvm-svn: 37591
rename Type::getIntegralTypeMask to Type::getIntegerTypeMask.
This makes naming much more consistent. For example, there are now no longer any
instances of IntegerType that are not considered isInteger! :)
llvm-svn: 33225
adding a temporary wrapper around the ostream to make it friendly to
functions expecting an LLVM stream. This should be fixed in the future.
llvm-svn: 31990
The long awaited CAST patch. This introduces 12 new instructions into LLVM
to replace the cast instruction. Corresponding changes throughout LLVM are
provided. This passes llvm-test, llvm/test, and SPEC CPUINT2000 with the
exception of 175.vpr which fails only on a slight floating point output
difference.
llvm-svn: 31931
This patch implements the first increment for the Signless Types feature.
All changes pertain to removing the ConstantSInt and ConstantUInt classes
in favor of just using ConstantInt.
llvm-svn: 31063
When inserting code for an addrec expression with a non-unit stride, be
more careful where we insert the multiply. In particular, insert the multiply
in the outermost loop we can, instead of the requested insertion point.
This allows LSR to notice the mul in the right loop, reducing it when it gets
to it. This allows it to reduce the multiply, where before it missed it.
This happens quite a bit in the test suite, for example, eliminating 2
multiplies in art, 3 in ammp, 4 in apsi, reducing from 1050 multiplies to
910 muls in galgel (!), from 877 to 859 in applu, and 36 to 30 in bzip2.
This speeds up galgel from 16.45s to 16.01s, applu from 14.21 to 13.94s and
fourinarow from 66.67s to 63.48s.
This implements Transforms/LoopStrengthReduce/nested-reduce.ll
llvm-svn: 24102
Andrew Trick