PE32+ supports 64 bit address space, but the file format remains 32 bit.
So its file format is pretty similar to PE32 (32 bit executable). The
differences compared to PE32 are (1) the lack of "BaseOfData" field and
(2) some of its data members are 64 bit.
In this patch, I added a new member function to get a PE32+ Header object to
COFFObjectFile class and made llvm-readobj to use it.
llvm-svn: 200117
After several refactorings on the MCJIT remote communication, things are
finally looking good on Clang-compiled LLVM regarding MCJIT remote tests,
so I'm re-enabling them to see how the self-hosting buildbot behaves over
a longer period.
llvm-svn: 200102
I disabled the use of TBAA in CodeGen in r200093. This adds a test case that
demonstrates the problems with inttoptr and TBAA in CodeGen (and, specifically,
the problem that causes LLVM to miscompile itself in Release mode). This test
will currently fail if -use-tbaa-in-sched-mi is enabled.
llvm-svn: 200097
This fixes a regression introduced by r182908, which broke
llvm-objdump's ability to display relocations inline in a disassembly
dump for ELF object files.
That change removed a SectionRelocMap from Object/ELF.h, which we
recreate in llvm-objdump.cpp.
I discovered this regression via an out-of-tree test
(test/NaCl/X86/pnacl-hides-sandbox-x86-64.ll) which used llvm-objdump.
Note that the "Unknown" string in the test output on i386 isn't quite
right, but this appears to be a pre-existing bug.
Differential Revision: http://llvm-reviews.chandlerc.com/D2559
llvm-svn: 200090
r200064 depends on r200051.
r200051 is broken: I tries to replace .mips_hack_elf_flags, which is a good
thing, but what it replaces it with is even worse.
The new emitMipsELFFlags it adds corresponds to no assembly directive, is not
marked as a hack and is not even printed to the .s file.
The patch also introduces more uses of hasRawTextSupport.
The correct way to remove .mips_hack_elf_flags is to have the mips target
streamer handle the default flags (and command line options). That way the
same code path is used for asm and obj. The streamer interface should *really*
correspond to what is printed in the .s file.
llvm-svn: 200078
the loops in a function, and teach LICM to work in the presance of
LCSSA.
Previously, LCSSA was a loop pass. That made passes requiring it also be
loop passes and unable to depend on function analysis passes easily. It
also caused outer loops to have a different "canonical" form from inner
loops during analysis. Instead, we go into LCSSA form and preserve it
through the loop pass manager run.
Note that this has the same problem as LoopSimplify that prevents
enabling its verification -- loop passes which run at the end of the loop
pass manager and don't preserve these are valid, but the subsequent loop
pass runs of outer loops that do preserve this pass trigger too much
verification and fail because the inner loop no longer verifies.
The other problem this exposed is that LICM was completely unable to
handle LCSSA form. It didn't preserve it and it actually would give up
on moving instructions in many cases when they were used by an LCSSA phi
node. I've taught LICM to support detecting LCSSA-form PHI nodes and to
hoist and sink around them. This may actually let LICM fire
significantly more because we put everything into LCSSA form to rotate
the loop before running LICM. =/ Now LICM should handle that fine and
preserve it correctly. The down side is that LICM has to require LCSSA
in order to preserve it. This is just a fact of life for LCSSA. It's
entirely possible we should completely remove LCSSA from the optimizer.
The test updates are essentially accomodating LCSSA phi nodes in the
output of LICM, and the fact that we now completely sink every
instruction in ashr-crash below the loop bodies prior to unrolling.
With this change, LCSSA is computed only three times in the pass
pipeline. One of them could be removed (and potentially a SCEV run and
a separate LoopPassManager entirely!) if we had a LoopPass variant of
InstCombine that ran InstCombine on the loop body but refused to combine
away LCSSA PHI nodes. Currently, this also prevents loop unrolling from
being in the same loop pass manager is rotate, LICM, and unswitch.
There is one thing that I *really* don't like -- preserving LCSSA in
LICM is quite expensive. We end up having to re-run LCSSA twice for some
loops after LICM runs because LICM can undo LCSSA both in the current
loop and the parent loop. I don't really see good solutions to this
other than to completely move away from LCSSA and using tools like
SSAUpdater instead.
llvm-svn: 200067
This commit caused -Woverloaded-virtual warnings. The two new
TargetTransformInfo::getIntImmCost functions were only added to the superclass,
and to the X86 subclass. The other targets were not updated, and the
warning highlighted this by pointing out that e.g. ARMTTI::getIntImmCost was
hiding the two new getIntImmCost variants.
We could pacify the warning by adding "using TargetTransformInfo::getIntImmCost"
to the various subclasses, or turning it off, but I suspect that it's wrong to
leave the functions unimplemnted in those targets. The default implementations
return TCC_Free, which I don't think is right e.g. for ARM.
llvm-svn: 200058
This patch uses a common MipsTargetSteamer interface for both
MipsAsmPrinter and MipsAsmParser for recording default and commandline
driven directives that affect ELF header flags.
It has been noted that the .ll tests affected by this patch belong in
test/Codegen/Mips. I will move them in a separate patch.
Also, a number of directives do not get expressed by AsmPrinter in the
resultant .s assembly such as setting the correct ASI. I have noted this
in the tests and they will be addressed in later patches.
llvm-svn: 200051
The i8 type is not registered with any register class.
This causes a segmentation fault in MachineLICM::getRegisterClassIDAndCost.
The code selects the first type associated with register class FPR8,
which happens to be i8.
It uses this type (i8) to get the representative class pointer, which is 0.
It then uses this pointer to access a field, resulting in segmentation fault.
Since i8 type is not being used for printing any neon instruction
we can safely remove it.
llvm-svn: 200046
Retry commit r200022 with a fix for the build bot errors. Constant expressions
have (unlike instructions) module scope use lists and therefore may have users
in different functions. The fix is to simply ignore these out-of-function uses.
llvm-svn: 200034
This pass identifies expensive constants to hoist and coalesces them to
better prepare it for SelectionDAG-based code generation. This works around the
limitations of the basic-block-at-a-time approach.
First it scans all instructions for integer constants and calculates its
cost. If the constant can be folded into the instruction (the cost is
TCC_Free) or the cost is just a simple operation (TCC_BASIC), then we don't
consider it expensive and leave it alone. This is the default behavior and
the default implementation of getIntImmCost will always return TCC_Free.
If the cost is more than TCC_BASIC, then the integer constant can't be folded
into the instruction and it might be beneficial to hoist the constant.
Similar constants are coalesced to reduce register pressure and
materialization code.
When a constant is hoisted, it is also hidden behind a bitcast to force it to
be live-out of the basic block. Otherwise the constant would be just
duplicated and each basic block would have its own copy in the SelectionDAG.
The SelectionDAG recognizes such constants as opaque and doesn't perform
certain transformations on them, which would create a new expensive constant.
This optimization is only applied to integer constants in instructions and
simple (this means not nested) constant cast experessions. For example:
%0 = load i64* inttoptr (i64 big_constant to i64*)
Reviewed by Eric
llvm-svn: 200022
compile unit. Make these relocations on the platforms that need
relocations and add a routine to ensure that we don't put the
addresses in an offset table for split dwarf.
llvm-svn: 199990
This commit teaches the X86 backend to create the same X86 instructions when it
lowers an sadd/ssub with overflow intrinsic and a conditional branch that uses
that overflow result. This allows SelectionDAG to recognize and remove one of
the redundant operations.
This fixes <rdar://problem/15874016> and <rdar://problem/15661073>.
Reviewed by Nadav
llvm-svn: 199976
scale factors in memory addresses. As it does for .att_syntax.
It was producing:
Assertion failed: (((Scale == 1 || Scale == 2 || Scale == 4 || Scale == 8)) && "Invalid scale!"), function CreateMem, file /Volumes/SandBox/llvm/lib/Target/X86/AsmParser/X86AsmParser.cpp, line 1133.
rdar://14967214
llvm-svn: 199942
Originally, BLX was passed as operand #0 in MachineInstr and as operand
#2 in MCInst. But now, it's operand #2 in both cases.
This patch also removes unnecessary FileCheck in the test case added by r199127.
llvm-svn: 199928
This pattern uses an SDNodeXForm, which isn't being emitted for some
reason. I can get it to work by attaching the PatLeaf that has the
XForm to the argument in the output pattern, but this results in an
immediate being used in a register operand, which the backend can't
handle yet.
llvm-svn: 199918
The control flow finalizer would sometimes use an ALU_POP_AFTER
instruction before the vetex fetch clause instead of using a POP
instruction after it.
llvm-svn: 199917
Implement the getUnrollingPreferences() function for
AMDGPUTargetTransformInfo so that loops that do address calculations
on pointers derived from alloca are unconditionally unrolled.
Unrolling these loops makes it more likely that SROA will be able to
eliminate the allocas, which is a big win for R600 since memory
allocated by alloca (private memory) is really slow.
llvm-svn: 199916
Argument promotion can replace an argument of a call with an alloca. This
requires clearing the tail marker as it is very likely that the callee is now
using an alloca in the caller.
This fixes pr14710.
llvm-svn: 199909
The unit test is now disabled on non-asserts builds.
The CF stack can be corrupted if you use CF_ALU_PUSH_BEFORE,
CF_ALU_ELSE_AFTER, CF_ALU_BREAK, or CF_ALU_CONTINUE when the number of
sub-entries on the stack is greater than or equal to the stack entry
size and sub-entries modulo 4 is either 0 or 3 (on cedar the bug is
present when number of sub-entries module 8 is either 7 or 0)
We choose to be conservative and always apply the work-around when the
number of sub-enries is greater than or equal to the stack entry size,
so that we can safely over-allocate the stack when we are unsure of the
stack allocation rules.
reviewed-by: Vincent Lejeune <vljn at ovi.com>
llvm-svn: 199905
Rui Ueyama