Stack addressing needs addressing modes that provide an offset field
immediately following the frame index. An initializer from a non-stack
addressing could force the stack address to use a form that does not
provide an offset field.
llvm-svn: 330191
The function getMinimumVF(ElemWidth) will return the minimum VF for
a vector with elements of size ElemWidth bits. This value will only
apply to targets for which TTI::shouldMaximizeVectorBandwidth returns
true. The value of 0 indicates that there is no minimum VF.
Differential Revision: https://reviews.llvm.org/D45271
llvm-svn: 330062
The compiler is generating packet with the following instructions,
which causes an undefined register assert in the verifier.
$r0 = IMPLICIT_DEF
$r1 = IMPLICIT_DEF
S2_storerd_io killed $r29, 0, killed %d0
The problem is that the packetizer is not saving the IMPLICIT_DEF
instructions, which are needed when checking if it is legal to
add the store instruction. The fix is to add the IMPLICIT_DEF
instructions to the CurrentPacketMIs structure.
Patch by Brendon Cahoon.
llvm-svn: 329439
Packetizer keeps two zero-latency bound instrctions in the same packet ignoring
the stalls on the later instruction. This should not be the case if there is no
data dependence.
Patch by Sumanth Gundapaneni.
llvm-svn: 329437
Makes it easier to see mistakes such as the one fixed in r329178 and makes
the different target CMakeLists more consistent.
Also remove some stale-looking comments from the Nios2 target cmakefile.
No intended behavior change.
llvm-svn: 329181
For Hexagon, peeling loops with small runtime trip count is beneficial for our
benchmarks. We set PeelCount in HexagonTargetInfo.cpp and we use PeelCount set
by the target for computing the desired peel count.
Differential Revision: https://reviews.llvm.org/D44880
llvm-svn: 329042
Two memory instructions with a dependency only on the address register
between the two (the first one of them being post-incrememnt) can be
packetized together after the offset on the second was updated to the
incremement value. Make sure that the new offset is valid for the
instruction.
llvm-svn: 328897
For Hexagon, peeling loops with small runtime trip count is beneficial for our
benchmarks. We set PeelCount in HexagonTargetInfo.cpp and we use PeelCount set
by the target for computing the desired peel count.
Differential Revision: https://reviews.llvm.org/D44880
llvm-svn: 328854
Currently EVT is in the IR layer only because of Function.cpp needing a very small piece of the functionality of EVT::getEVTString(). The rest of EVT is used in codegen making CodeGen a better place for it.
The previous code converted a Type* to EVT and then called getEVTString. This was only expected to handle the primitive types from Type*. Since there only a few primitive types, we can just print them as strings directly.
Differential Revision: https://reviews.llvm.org/D45017
llvm-svn: 328806
These instructions have been around for a long time, but we
haven't supported intrinsics for them. The "new" versions use
the CSx register for the start of the buffer instead of the K
field in the Mx register.
We need to use pseudo instructions for these instructions until
after register allocation. The problem is that these instructions
allocate a M0/CS0 or M1/CS1 pair. But, we can't generate code for
the CSx set-up until after register allocation when the Mx
register has been fixed for the instruction.
There is a related clang patch.
Patch by Brendon Cahoon.
llvm-svn: 328724
This implements a set of TTI functions that the loop vectorizer uses.
The only purpose of this is to enable testing. Auto-vectorization is
disabled by default, enabled by -hexagon-autohvx.
llvm-svn: 328639
The patch contains severals changes needed to pipeline an example
that was transformed so that a Phi with a subreg is converted to
copies.
The pipeliner wasn't working for a couple of reasons.
- The RecMII was 3 instead of 2 due to the extra copies.
- Copy instructions contained a latency of 1.
- The node order algorithm was not choosing the best "bottom"
node, which caused an instruction to be scheduled that had a
predecessor and successor already scheduled.
- Updated the Hexagon Machine Scheduler to check if the node is
latency bound when adding the cost for a 0-latency dependence.
The RecMII was 3 because the computation looks at the number of
nodes in the recurrence. The extra copy is an extra node but
it shouldn't increase the latency. The new RecMII computation
looks at the latency of the instructions in the recurrence. We
changed the latency of the dependence of a copy to 0. The latency
computation for the copy also checks the use of the copy (similar
to a reg_sequence).
The node order algorithm was not choosing the last instruction
in the recurrence for a bottom up traversal. This was when the
last instruction is a copy. A check was added when choosing the
instruction to check for NodeNum if the maxASAP is the same. This
means that the scheduler will not end up with another node in
the recurrence that has both a predecessor and successor already
scheduled.
The cost computation in Hexagon Machine Scheduler adds cost when
an instruction can be packetized with a zero-latency instruction.
We should only do this if the schedule is latency bound.
Patch by Brendon Cahoon.
llvm-svn: 328542
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort. Refer the comments section in D44363 for a list of all the required patches.
Reviewers: kparzysz
Reviewed By: kparzysz
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44857
llvm-svn: 328430
This is used by llvm tblgen as well as by LLVM Targets, so the only
common place is Support for now. (maybe we need another target for these
sorts of things - but for now I'm at least making them correct & we can
make them better if/when people have strong feelings)
llvm-svn: 328395
The branch relaxation pass collects sizes of all instructions at the
beginning, before any changes have been made. It then performs one pass
over all branches to see which ones need to be extended. It does not
account for the case when a previously valid branch becomes out-of-range
due to relaxing other branches.
This approach fixes this problem by assuming from the beginning that
all extendable branches have been extended. This may cause unneeded
relaxation in some cases, but avoids iteration and recomputing instruction
sizes.
llvm-svn: 328360
The HexagonExpandCondsets pass is incorrectly removing the dead
flag on a definition that is really dead, and adding a kill flag
to a use that is tied to a definition. This causes an assert later
during the machine scheduler when querying the live interval
information.
Patch by Brendon Cahoon.
llvm-svn: 328357
HexagonGenMux would collapse pairs of predicated transfers if it assumed
that the predicated .new forms cannot be created. Turns out that generating
mux is preferable in almost all cases.
Introduce an option -hexagon-gen-mux-threshold that controls the minimum
distance between the instruction defining the predicate and the later of
the two transfers. If the distance is closer than the threshold, mux will
not be generated. Set the threshold to 0 by default.
llvm-svn: 328346
When converting an instruction to the wider version, copy any
subregisters if the original operand has a subregister.
Patch by Brendon Cahoon.
llvm-svn: 328333
Remove #include of Transforms/Scalar.h from Transform/Utils to fix layering.
Transforms depends on Transforms/Utils, not the other way around. So
remove the header and the "createStripGCRelocatesPass" function
declaration (& definition) that is unused and motivated this dependency.
Move Transforms/Utils/Local.h into Analysis because it's used by
Analysis/MemoryBuiltins.cpp.
llvm-svn: 328165
Add barrier edges to check for any physical register. The previous code
worked for the function return registers: r0/d0, v0/w0.
Patch by Brendon Cahoon.
llvm-svn: 328120
TopReadyCycle and BotReadyCycle were off by one cycle when an SU is either
the first instruction or the last instruction in a packet.
Patch by Ikhlas Ajbar.
llvm-svn: 328000
This patch changes the isLatencyBound heuristic to look at the
path length based upon the number of packets needed to schedule
a basic block. For small basic blocks, the heuristic uses a small
threshold for isLatencyBound. For large basic blocks, the
heuristic uses a large threshold.
The goal is to increase the priority of an instruction in a small
basic block that has a large height or depth relative to the code
size. For large functions, the height and depth are ignored
because it increases the live range of a register and causes more
spills. That is, for large functions, it is more important to
schedule instructions when available, and attempt to keep the defs
and uses closer together.
Patch by Brendon Cahoon.
llvm-svn: 327987
Avoid scheduling two loads in such a way that they would end up in the
same packet. If there is a load in a packet, try to schedule a non-load
next.
Patch by Brendon Cahoon.
llvm-svn: 327742
This adds two features: "packets", and "nvj".
Enabling "packets" allows the compiler to generate instruction packets,
while disabling it will prevent it and disable all optimizations that
generate them. This feature is enabled by default on all subtargets.
The feature "nvj" allows the compiler to generate new-value jumps and it
implies "packets". It is enabled on all subtargets.
The exception is made for packets with endloop instructions, since they
require a certain minimum number of instructions in the packets to which
they apply. Disabling "packets" will not prevent hardware loops from
being generated.
llvm-svn: 327302
r327171 "Improve Dependency analysis when doing multi-node Instruction Selection"
r328170 "[DAG] Enforce stricter NodeId invariant during Instruction selection"
Reverting patch as NodeId invariant change is causing pathological
increases in compile time on PPC
llvm-svn: 327197
Instruction Selection makes use of the topological ordering of nodes
by node id (a node's operands have smaller node id than it) when doing
cycle detection. During selection we may violate this property as a
selection of multiple nodes may induce a use dependence (and thus a
node id restriction) between two unrelated nodes. If a selected node
has an unselected successor this may allow us to miss a cycle in
detection an invalid selection.
This patch fixes this by marking all unselected successors of a
selected node have negated node id. We avoid pruning on such negative
ids but still can reconstruct the original id for pruning.
In-tree targets have been updated to replace DAG-level replacements
with ISel-level ones which enforce this property.
This preemptively fixes PR36312 before triggering commit r324359 relands
Reviewers: craig.topper, bogner, jyknight
Subscribers: arsenm, nhaehnle, javed.absar, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D43198
llvm-svn: 327170
This is a follow-up to r325169, this time for all types, not just HVX
vector types.
Disable this by default, since it's not always safe.
llvm-svn: 326915
Summary:
Add a target option AllowRegisterRenaming that is used to opt in to
post-register-allocation renaming of registers. This is set to 0 by
default, which causes the hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq
fields of all opcodes to be set to 1, causing
MachineOperand::isRenamable to always return false.
Set the AllowRegisterRenaming flag to 1 for all in-tree targets that
have lit tests that were effected by enabling COPY forwarding in
MachineCopyPropagation (AArch64, AMDGPU, ARM, Hexagon, Mips, PowerPC,
RISCV, Sparc, SystemZ and X86).
Add some more comments describing the semantics of the
MachineOperand::isRenamable function and how it is set and maintained.
Change isRenamable to check the operand's opcode
hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq bit directly instead of
relying on it being consistently reflected in the IsRenamable bit
setting.
Clear the IsRenamable bit when changing an operand's register value.
Remove target code that was clearing the IsRenamable bit when changing
registers/opcodes now that this is done conservatively by default.
Change setting of hasExtraSrcRegAllocReq in AMDGPU target to be done in
one place covering all opcodes that have constant pipe read limit
restrictions.
Reviewers: qcolombet, MatzeB
Subscribers: aemerson, arsenm, jyknight, mcrosier, sdardis, nhaehnle, javed.absar, tpr, arichardson, kristof.beyls, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, escha, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D43042
llvm-svn: 325931
Summary:
There are transformation that change setcc into other constructs, and transform that try to reconstruct a setcc from the brcond condition. Depending on what order these transform are done, the end result differs.
Most of the time, it is preferable to get a setcc as a brcond argument (and this is why brcond try to recreate the setcc in the first place) so we ensure this is done every time by also doing it at the setcc level when the only user is a brcond.
Reviewers: spatel, hfinkel, niravd, craig.topper
Subscribers: nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D41235
llvm-svn: 325892
Enable multiple COPY hints to eliminate more COPYs during register allocation.
Note that this is something all targets should do, see
https://reviews.llvm.org/D38128.
Review: Krzysztof Parzyszek
llvm-svn: 325697
Use the FunctionType of the callee when it's available. It may not be
available for synthetic calls to functions specified by external symbols.
llvm-svn: 325269
The FunctionType of the callee is always available, even if the Function
of the callee is not. Use that to get the number of fixed parameters.
llvm-svn: 325259
Add a common -trap-unreachable option, similar to the target
specific hexagon equivalent, which has been replaced. This
turns unreachable instructions into traps, which is useful for
debugging.
Differential Revision: https://reviews.llvm.org/D42965
llvm-svn: 324880
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
Hexagon LoopIdiom pass to cease using the old IRBuilder createMemCpy/createMemMove
single-alignment APIs in favour of the new API that allows setting source and
destination alignments independently.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773, rL324774,
rL324781 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 324784
Vector pairs are legal types, but not every operation can work on pairs.
For those operations that are legal for single vectors, generate a concat
of their results on pair halves.
llvm-svn: 324350
It was expanded directly into instructions earlier. That was to avoid
loads from a constant pool for a vector negation: "xor x, splat(i1 -1)".
Implement ISD opcodes QTRUE and QFALSE to denote logical vectors of
all true and all false values, and handle setcc with negations through
selection patterns.
llvm-svn: 324348
The function shuffp2 was breaking up a wide shuffle into a pair of
narrower ones, except that the narrower shuffle masks were actually
uninitialized.
llvm-svn: 324243
Selecting of constant HVX vectors involves some "manual processing",
which mishandled an unrelated BITCAST operation causing a selection
error.
llvm-svn: 323887
Instructions like memd(r0+##global+1) are legal as long as the entire
address is properly aligned. Assuming that "global" is aligned at an
8-byte boundary, the expression "global+1" appears to be misaligned.
Handle such cases in HexagonConstExtenders, and make sure that any non-
extended offsets generated are still aligned accordingly.
llvm-svn: 323799
This reverts r323562, since it wasn't actually necessary. Constant-
extended offsets do not need to be aligned, as long as the effective
address is aligned.
Keep the testcase, with a modification which checks that such offsets
are not unnecessarily avoided.
llvm-svn: 323798
A correctly aligned address may happen to be separated into a variable
part and a constant part, where the constant part does not match the
alignment needed in a load/store that uses this address. Such a constant
cannot be used as an immediate offset in an indexed instruction.
When lowering a global address, make sure that if there is an offset
folded into the global, the offset is valid for all uses in load/store
instructions.
llvm-svn: 323562
The code in EmitFunctionEntryCode needs to know the maximum stack
alignment, but it runs very early in the selection process (before
lowering). The final stack alignment may change during lowering, so
the code needs to be moved to where the alignment is known.
llvm-svn: 323374
In addition to that, make sure that there are no boolean vector types that
are associated with multiple register classes. Specifically, remove v32i1
and v64i1 from integer register classes. These types will correspond to
results of vector comparisons, and as such should belong to the vector
predicate class. Having them in scalar registers as well makes legalization
ambiguous.
llvm-svn: 323229
We can probably take this a step further since the only
user of the isUsed flag is AsmParser it should probably
be doing this explicitly. For now this is a step in the
right direction though.
Differential Revision: https://reviews.llvm.org/D41971
llvm-svn: 322386
Krzysztof Parzyszek