Further investigation required; tests will be enabled on the buildbot
worker soon. Marking failing tests for now in order to start with a
green buildbot while investigation takes place.
This is a recommit of r326134, with the required import added.
llvm.org/pr36527
llvm-svn: 326166
These tests all test very similar things, and use the same inferior.
They were only placed in separate folders to achieve better
paralelization. Now that we paralelize at a file level, this is no
longer relevant, and we can put them together again.
llvm-svn: 326159
When writing an inline test, there is no way to make sure that any of
the inline commands are actually executed, so this patch adds a sanity
check that at least one breakpoint was hit. This avoids a test with no
breakpoints being hit passing.
Differential Revision: https://reviews.llvm.org/D43694
llvm-svn: 326140
Further investigation required; tests will be enabled on the buildbot
worker soon. Marking failing tests for now in order to start with a
green buildbot while investigation takes place.
llvm.org/pr36527
llvm-svn: 326134
Without this fix, the test ERRORs because the link of the inferior fails. This
patch adds the LLDB_TEST_API macro where needed and uses the new -2 magic
value for num_expected_locations to account for lazy-loading of module symbols
on Windows.
With this fix, the test itself still fails: conflicting_symbol isn't in the
debug info nor the export table, and Windows binaries don't have an equivalent
of the ELF .symtab. We need to understand why the test works to keep the
symbol out of the debug info. In the mean time, having the test fail at this
point is a better indication of the remaining problem than a build error.
Differential Revision: https://reviews.llvm.org/D43688
llvm-svn: 326130
Summary:
The command takes two input arguments: a module to use as a debug target
and a file containing a list of commands. The command will execute each
of the breakpoint commands in the file and dump the breakpoint state
after each one.
The commands are expected to be breakpoint set/remove/etc. commands, but
I explicitly allow any lldb command here, so you can do things like
change setting which impact breakpoint resolution, etc. There is also a
"-persistent" flag, which causes lldb-test to *not* automatically clear
the breakpoint list after each command. Right now I don't use it, but
the idea behind it was that it could be used to test more complex
combinations of breakpoint commands (set+modify, set+disable, etc.).
Right now the command prints out only the basic breakpoint state, but
more information can be easily added there. To enable easy matching of
the "at least one breakpoint location found" state, the command
explicitly prints out the string "At least one breakpoint location.".
To enable testing of breakpoints set with an absolute paths, I add the
ability to perform rudimentary substitutions on the commands: right now
the string %p is replaced by the directory which contains the command
file (so, under normal circumstances, this will perform the same
substitution as lit would do for %p).
I use this command to rewrite the TestBreakpointCaseSensitivity test --
the test was checking about a dozen breakpoint commands, but it was
launching a new process for each one, so it took about 90 seconds to
run. The new test takes about 0.3 seconds for me, which is approximately
a 300x speedup.
Reviewers: davide, zturner, jingham
Subscribers: luporl, lldb-commits
Differential Revision: https://reviews.llvm.org/D43686
llvm-svn: 326112
This patch removes the HashString function from StringExtraces and
replaces its uses with calls to djbHash from DJB.h.
This change is *almost* NFC. While the algorithm is identical, the
djbHash implementation in StringExtras used 0 as its default seed while
the implementation in DJB uses 5381. The latter has been shown to result
in less collisions and improved avalanching and is used by the DWARF
accelerator tables.
Because some test were implicitly relying on the hash order, I've
reverted to using zero as a seed for the following two files:
lld/include/lld/Core/SymbolTable.h
llvm/lib/Support/StringMap.cpp
Differential revision: https://reviews.llvm.org/D43615
llvm-svn: 326091
It looks like some of our tests depend on the ordering of hashed values.
I'm reverting my changes while I try to reproduce and fix this locally.
Failing builds:
lab.llvm.org:8011/builders/lld-x86_64-darwin13/builds/18388
lab.llvm.org:8011/builders/clang-cmake-x86_64-sde-avx512-linux/builds/6743
lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast/builds/15607
llvm-svn: 326082
This removes the HashString function from StringExtraces and replaces
its uses with calls to djbHash from DJB.h
This is *almost* NFC. While the algorithm is identical, the djbHash
implementation in StringExtras used 0 as its seed while the
implementation in DJB uses 5381. The latter has been shown to result in
less collisions and improved avalanching.
https://reviews.llvm.org/D43615
(cherry picked from commit 77f7f965bc9499a9ae768a296ca5a1f7347d1d2c)
llvm-svn: 326081
The lldb-server unit tests don't test the right thing when the debug
server in use is copied from somewhere else. This can lead to spurious
test failures.
Disable these unit tests when an external debug server is in use.
Fixes llvm.org/PR36494.
llvm-svn: 326001
Removing the template arguments and most of the mutating methods from
CleanUp makes it easier to understand and reuse.
In its present state, CleanUp would be too cumbersome to adapt to cases
where multiple objects need to be released. Take for example this change
in swift-lldb:
https://github.com/apple/swift-lldb/pull/334/files#diff-6f474df750f75c8ba675f2a8408a5629R219
This change is simple to express with the new CleanUp, but not so simple
with the old version.
Differential Revision: https://reviews.llvm.org/D43662
llvm-svn: 325964
Summary:
The llvm function is equivalent to this one. Where possible I tried to
replace const char* with llvm::StringRef to avoid extra strlen
computations. In most places, I was able to track the c string back to
the ConstString it was created from.
I also create a test that verifies we are able to lookup names with
unicode characters, as a bug in the llvm compiler (it accidentally used
a different hash function) meant this was not working until recently.
This also removes the unused ExportTable class.
Reviewers: aprantl, davide
Subscribers: JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D43596
llvm-svn: 325927
Summary:
Potentially due to the recent testuite refactorings, this test now reports
a full absolute path but expect just the filename. For some reason this
test is skipped on GreenDragon so we've never seen the issue.
Reviewers: vsk
Subscribers: kubamracek, lldb-commits
Differential Revision: https://reviews.llvm.org/D43577
llvm-svn: 325859
Summary:
This test launches a helper that uses the debugserver. The environment
variable sepcifying the debug server wasn't passed to this helper, thus
it was using the default one.
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43546
llvm-svn: 325858
This test is consistently reporting unexpected pass for me, and the
expectedFailure decorator was removed from the legacy test in r310626.
Apply the same change to the lit version of this test.
Will investigate further if this fails once the new buildbot is running
tests.
llvm.org/pr17807
llvm-svn: 325856
This test was only testing that clang produced the correct informations
for __apple accelerated tables. So, it's a clang test. Also, it
doesn't require any debugger intervention, the object file can
be analyzed statically with a dumper. Also, the input program
was highly verbose (unnecessarily).
r325850 commits a clang test instead, so it's time to retire this.
llvm-svn: 325851
The header file for the DLL tried to declare inline functions and a local
function as dllexport which broke the compile and link. Removing the bad
declarations solves the problem, and the test passes on Windows now.
Differential Revision: https://reviews.llvm.org/D43600
llvm-svn: 325836
Ensure that the test data is an array of bytes rather than a string that gets
encoded differently between Python 2 and Python 3.
Differential Revision: https://reviews.llvm.org/D43532
llvm-svn: 325835
Summary:
The PC corresponding to the breakpoint was being calculated wrongly,
which was causing LLDB to never go past the first breakpoint, when
there was a second one adjacent to it.
Reviewers: clayborg, labath
Reviewed By: clayborg, labath
Subscribers: anajuliapc, alexandreyy, lbianc
Differential Revision: https://reviews.llvm.org/D43344
Patch by Leandro Lupori <leandro.lupori@gmail.com>.
llvm-svn: 325728
Also, fix a missing dependency, as lit requires llvm-config
to run. This is becoming more and more important as we
write more FileCheck style tests.
Differential Revision: https://reviews.llvm.org/D43591
llvm-svn: 325719
Summary:
This test was failing on Windows because it expected the breakpoint in the
dynamic library to be resolved before the process is launched. Since the DLL
isn't loaded until the process is launched this didn't work.
The fix creates a special value (-2) for num_expected_locations that ignores
the actual number of breakpoint locations found.
Reviewers: jasonmolenda
Subscribers: sanjoy, lldb-commits
Differential Revision: https://reviews.llvm.org/D43419
llvm-svn: 325704
The patch added an extra argument to the append_to_process_working_directory
function. I have somehow missed updating this test, and it did not show up
because the code was only run in remote mode.
llvm-svn: 325702
Summary:
These were not being flaky, but they're still making the tree dirty.
These tests were using lldbutil.append_to_process_working_directory to
derive the file path so I fix them by modifying the function to return
the build directory for local tests.
Technically, now the path returned by this function does not point to
the process working directory for local tests, but I think it makes
sense to keep the function name, as I think we should move towards
launching the process in the build directory (and I intend to change
this for the handful of inferiors that actually care about their PWD,
for example because they need to create files there).
Reviewers: davide, aprantl
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43506
llvm-svn: 325690
This test was accessing self.debug_info, which doesn't exist anymore. For
some reason the macOS bots are skipping this test because they think the
compiler is not clang. We'll look into this separately.
llvm-svn: 325666
Summary:
This is modeled after the clang and llvm lit tests.
Several properties have CMAKE_CFG_INTDIR as part of the path - this works correctly when the cmake generator only supports one configuration which is known at configuration time, but it does not work correctly when the cmake generator supports multiple configurations (for example, VS).
For VS, CMAKE_CFG_INTDIR ends up set as $Configuration and then it is never updated correctly. Instead, the lit configuration can use a property that can be overwritten at run time. AddLLVM does that for several properties (such as LLVM_TOOLS_DIR).
This change is also removing properties from the lit/CMakeLists.txt that are actually set during the call to configure_lit_site_cfg
Reviewers: zturner, lldb-commits
Reviewed By: zturner
Subscribers: llvm-commits, labath, stella.stamenova, mgorny, hintonda
Differential Revision: https://reviews.llvm.org/D43096
llvm-svn: 325652
Summary:
The paralelization patch exposed a bunch of cases where we were still
touching the source tree (as these tests were now stepping on each
others toes and being flaky).
This patch removes such issues from breakpoint command tests. Since the
only reason they were creating files was to indirectly test whether the
breakpoint commands got executed (and plumbing the full build tree path
to all places that needed it would be messy) I decided to modify the
tests to check for a different side effect instead: modification of a
global variable. This also makes the code simpler as checking the value
of the global variable is easier, and there is nothing to clean up.
As the tests aren't really doing anything debug-info related, I took the
opportunity to also mark them as NO_DEBUG_INFO_TESTCASEs.
Reviewers: jingham, aprantl
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43464
llvm-svn: 325570
Before this patch, LLDB was not able to evaluate expressions that
resulted in a value with a typeof- or decltype-type. This patch fixes
that.
Before:
(lldb) p int i; __typeof__(i) j = 1; j
(typeof (i)) $0 =
After:
(lldb) p int i; __typeof__(i) j = 1; j
(typeof (i)) $0 = 1
Differential revision: https://reviews.llvm.org/D43471
rdar://37461520
llvm-svn: 325568
The first issue is about the flaky test rerun logic. This was grouping
tests by subdir and passing them into walk_and_invoke in the incorrect
form. This part can be just deleted as its not needed anymore.
The second problem (which I noticed while investigating the first one)
was that the "-p" switch was not working in multiprocessing mode. This
happened because we were returning None from process_file instead of a
tuple full of empty values for tests that did not match the -p regex.
Both of these would be caught earlier if python was a more strongly
typed language. :/
llvm-svn: 325519
Summary:
The issue was that we were parsing the registers into 64-bit integers
and the calling swapByteOrder without regard for the actual size of the
register. This switches the test to use the RegisterValue class which
tracks the register size, and knows how to initialize itself from a
piece of memory (so we don't need to swap byte order ourselves).
Reviewers: eugene, davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43376
llvm-svn: 325511
Summary:
This adds a SBDebugger::GetBuildConfiguration static function, which
returns a SBStructuredData describing the the build parameters of
liblldb. Right now, it just contains one entry: whether we were built
with XML support.
I use the new functionality to skip a test which requires XML support,
but concievably the new function could be useful to other liblldb
clients as well (making sure the library supports the feature they are
about to use).
Reviewers: zturner, jingham, clayborg, davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43333
llvm-svn: 325504
These were missed in the great refactor because they were added
concurrently with it. Since we started running tests in a more parallel
fashion they started to be flaky. This should fix it.
Now that we are no longer polluting the source tree, I also delete the
bit of custom cleanup code specific to these tests.
llvm-svn: 325495
Summary:
Consolidate LLDB_CODESIGN_IDENTITY logic in one place and use
SKIP_DEBUGSERVER, which can be set independently, to control
codesigning targets.
Currently, running cmake the first time in a clean directory, without
passing -DLLDB_CODESIGN_IDENTITY='', fails. However, subsequent runs
succeed. That's because LLDB_CODESIGN_IDENTITY gets added to the
CACHE after the initial test. To fix that, the default value must be
set before it's tested.
Here's the error produced on the first run:
CMake Error at tools/lldb/tools/debugserver/source/CMakeLists.txt:215 (add_custom_command):
No TARGET 'debugserver' has been created in this directory.
Differential Revision: https://reviews.llvm.org/D43432
llvm-svn: 325442
The test was generating long unix socket names, and the addition of a
new folder in the previous patch pushed it over the limit (although
linux has a fairly generous limit for path names, this does not apply to
unix sockets).
Modify the test to use a shorter name instead.
llvm-svn: 325340
The reason this test was disabled is no longer relevant. However, it
didn't turn into an unexpected success because of a syntax error in the
test itself. This commit fixes that and re-enables the test.
llvm-svn: 325339
Since we now can run multiple tests from the same directory at once, we
need to include the test name in the remote test directory instead.
I'm not sure if the test_number in the remote path is necessary anymore
(or even if it was ever necessary), but I choose to leave it in for now.
llvm-svn: 325334
Summary:
The PowerPC64 ABI plugin was modified to:
- properly handle vector type return values
- implement support for struct/class return values
A refactoring in the code that handles return values was also performed, to make it possible to handle structs without repeating (when possible) code that handles its fields.
There was also an issue with CreateInstance(), that only created an instance in the first time it was called and then cached it in a static var. When restarting a process under LLDB's control, the ABI's process weak pointer would become null, and using it would result in a segmentation fault. This issue became more evident after the latest changes to PPC64 plugin, that now uses the process pointer to get the target byte order, making LLDB to seg fault when restarting a program. This was fixed by making CreateInstance() to always create a new ABI instance.
All of LLDB's ReturnValue tests are passing for PPC64le now. It should work for PPC64be too, although this was not tested.
Reviewers: labath, clayborg
Reviewed By: labath
Subscribers: lbianc, anajuliapc, llvm-commits, alexandreyy, nemanjai, kbarton
Differential Revision: https://reviews.llvm.org/D42468
Patch by Leandro Lupori <leandro.lupori@gmail.com>.
llvm-svn: 325324
Summary:
Due to in-tree builds, we were parallelizing the tests at the directory
level. Now that the tests are built out-of-tree, we can remove this
limitation and paralelize at file level instead.
This decreases test suite time by about 10% for me, which is not
world-shattering, but it makes the code slightly simpler and will also
allow us to merge tests which were artificially spread over multiple
folders (TestConcurrentEvents...) to work-around this limitation.
To make this work, I've also needed to include the test file name in the
build directory name, as just the test method name is not unique enough
(plenty of tests have a test method called "test" or similar).
While doing this, I've found a couple of tests that are taking waaay longer then
they ought to (TestBreakpointCaseSensitivity -- 90 seconds), which I plan to
look into in the future.
Reviewers: aprantl
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43335
llvm-svn: 325322
Summary:
All the tests pass without hitting the situation mentioned in the FIXME, so,
per Aaron Smith's suggestion, this case will now return unconditionally.
Subscribers: sanjoy, mgorny, JDevlieghere
Differential Revision: https://reviews.llvm.org/D43215
llvm-svn: 325188
Summary:
LLDB doesn't use this code, the code has no tests, and the code does suspicious
things like hashing pointers to strings instead of the strings themselves.
Subscribers: sanjoy, mgorny, JDevlieghere
Differential Revision: https://reviews.llvm.org/D43202
llvm-svn: 324925
This test uses XML packets, but libxml is an optional dependency of
lldb, and this test fails if it is not present.
I'm leaving this enabled on mac, as thats the only platform that's
likely to have libxml always available, but ideally we should have a way
to skip this based on build configuration. I'll see if I can whip
something like that up soon, but for the time being, this unblocks the
buildbots.
llvm-svn: 324870
arch incompat with spec in file so it's rejected and the test fails.
will look into this later, will be a test case issue not a test issue;
test case may only be valid when lldb is built for/running on an x86_64
system.
llvm-svn: 324795
This patch makes LLDB's clang module cache path customizable via
settings set target.clang-modules-cache-path <path> and uses it in the
LLDB testsuite to reuse the same location inside the build directory
for LLDB and clang.
Differential Revision: https://reviews.llvm.org/D43099
llvm-svn: 324775
This only worked on MacOS, which now ships a newer version of
python without this bug. As such, we don't leak the fd, and
this test is not needed anymore (as it also hardcoded the python
version in the check).
llvm-svn: 324743
Summary:
Right now the test client is not parsing register values correctly,
which is manifesting itself in one test failing on 32-bit architectures
(pr36013). This parses the information from the qRegisterInfo packets
and stores it in the client, which will enable fixing the parsing in a
follow up commit.
I am also adding a new templated SendMessage overload, which enables one
to send a message get a parsed response in a single call.
Reviewers: eugene, davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43076
llvm-svn: 324722
Summary:
This is combination of following changes,
- Resolve function symbols in PDB symbol file. `lldb-test symbols` will display information about function symbols.
- Implement SymbolFilePDB::FindFunctions methods. On lldb console, searching function symbol by name and by regular expression are both available.
- Create lldb type for PDBSymbolFunc.
- Add tests to check whether functions with the same name but from different sources can be resolved correctly.
Reviewers: zturner, lldb-commits
Reviewed By: zturner
Subscribers: amccarth, labath, llvm-commits
Differential Revision: https://reviews.llvm.org/D42443
llvm-svn: 324707
Summary:
Update makefiles to specify -fPIC in Makefile.rules and only throw -fPIC when building a shared library. This change is necessary to allow building the lldb tests on Windows where -fPIC is not a valid option.
Update a few places to Python 3.x syntax
Reviewers: zturner, lldb-commits
Reviewed By: zturner
Subscribers: stella.stamenova, labath, llvm-commits
Differential Revision: https://reviews.llvm.org/D42994
llvm-svn: 324671
Summary:
The test was trying to reproduce a bug in handling of two concurrent
events, which was impossible to do reliably in a black-box style test.
In practice, this meant the test was only ever failing on remote
targets, as these were slow enough to trigger this.
Fortunately, we now have the ability to mock the server side of the
connection, which means we can simulate the failure deterministically,
so I rewrite the test to use the new gdb-client framework.
I've needed to add a couple of new packets to the mock server to be able
to do this. Instead of trying to guess how a "typical" gdb-client test
will want to handle this, I throw an exception in the implementation to
force the user to override them (the packets are only sent if the test
explicitly performs some action which will trigger them, so a basic test
which e.g. does not need the "continue" functionality will not need to
implement them).
Reviewers: owenpshaw
Subscribers: srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D42959
llvm-svn: 324590
Summary:
LLDB_TEST_COMPILER is not a valid option for CMake for LLDB. There are instead two properties LLDB_TEST_C_COMPILER and LLDB_TEST_CXX_COMPILER. Update the documents accordingly to reflect the correct information.
Reviewers: zturner, lldb-commits
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43061
llvm-svn: 324564
Summary:
This is a small change towards running the LLDB unit tests on Windows (still WIP).
Builds that use make do not point to specific configurations. However, builds with multiple configurations such as Visual Studio on Windows need the configuration (release/debug/etc) as part of the path so the binaries produced by clang are placed in the correct directory for the configuration.
Reviewers: zturner, lldb-commits, labath
Reviewed By: labath
Subscribers: labath, mgorny, hintonda, llvm-commits
Differential Revision: https://reviews.llvm.org/D42990
llvm-svn: 324555
The change in r324488 dropped the existing category attribute in for
instance methods. This patch corrects that.
Differential revision: https://reviews.llvm.org/D43024
llvm-svn: 324492
Inlined tests have a test function that is actually an instance method,
which requires a slightly different approach when it comes to setting
the category attribute. The attribute must be set on the actual
function, rather than on a particular instance.
llvm-svn: 324488
SPI call to to find its own shared cache's UUID. On newer sytems we
need to use the a new SPI which will return the UUID directly.
<rdar://problem/36625871>
llvm-svn: 324437
Now incorrect type argument that looks like T<A><B> doesn't
cause an assert, but just a parsing error.
Bug: 36224
Differential Revision: https://reviews.llvm.org/D42939
llvm-svn: 324380
This patch creates a <test>.dwarf, <test>.dwo, etc., build directory for each testcase variant.
Most importantly, this eliminates the need for the per-test lock file in the source directory.
Tests that are marked as NO_DEBUG_INFO_TESTCASE and build with
buildDefault() are built in a <test>.default build directory.
Differential Revision: https://reviews.llvm.org/D42763
llvm-svn: 324368
Davide pointed out this would be useful if the file ever needs to be
regenerated (and I certainly agree).
I also replace the test binary with a slightly smaller one -- I intended
to do this in the original commit, but I forgot to add it to the patch
as I was juggling several things at the same time.
llvm-svn: 324256
ObjectFileELF::GetModuleSpecifications contained a lot of tip-toing code
which was trying to avoid loading the full object file into memory. It
did this by trying to load data only up to the offset if was accessing.
However, in practice this was useless, as 99% of object files we
encounter have section headers at the end, so we would load the whole
file as soon as we start parsing the section headers.
In fact, this would break as soon as we encounter a file which does
*not* have section headers at the end (yaml2obj produces these), as the
access to .strtab (which we need to get the section names) was not
guarded by this offset check.
As this strategy was completely ineffective anyway, I do not attempt to
proliferate it further by guarding the .strtab accesses. Instead I just
lead the full file as soon as we are reasonably sure that we are indeed
processing an elf file.
If we really care about the load size here, we would need to reimplement
this to just load the bits of the object file we need, instead of
loading everything from the start of the object file to the given
offset. However, given that the OS will do this for us for free when
using mmap, I think think this is really necessary.
For testing this I check a (tiny) SO file instead of yaml2obj-ing it
because the fact that they come out first is an implementation detail of
yaml2obj that can change in the future.
llvm-svn: 324254
Summary:
We cannot call process_up->SetState() inside
the NativeProcessNetBSD::Factory::Launch
function because it triggers a NULL pointer
deference.
The generic code for launching a process in:
GDBRemoteCommunicationServerLLGS::LaunchProcess
sets the m_debugged_process_up pointer after
a successful call to m_process_factory.Launch().
If we attempt to call process_up->SetState()
inside a platform specific Launch function we
end up dereferencing a NULL pointer in
NativeProcessProtocol::GetCurrentThreadID().
Use the proper call process_up->SetState(,false)
that sets notify_delegates to false.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg
Reviewed By: labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D42868
llvm-svn: 324234
We've had a bug (fixed by https://reviews.llvm.org/D42828) where the
thread name was being read incorrectly. Add a test for this behavior.
llvm-svn: 324230
This test was marked as an expected failure because of PR20231 but it
seems to consistently result in an unexpected success across the bots.
Let's try to re-enable this test again.
llvm-svn: 324227
Summary:
This changes the way we store the debug info variant to make it
available earlier in the test bringup: instead of it being set by the
test wrapper method, it is set as a *property* of the wrapper method.
This way, we can inspect it as soon as self.testMethodName is
initialized. The retrieval is implemented by a new function
TestBase.getDebugInfo(), and all that's necessary to make it work is to
change self.debug_info into self.getDebugInfo().
While searching for debug_info occurences i noticed that TestLogging is
being replicated for no good reason, so I removed the replication there.
Reviewers: aprantl, jingham
Subscribers: eraman, JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D42836
llvm-svn: 324226
I have found LLDB cannot find separate debug info of Fedora /usr/bin/gdb.
It is because:
lrwxrwxrwx 1 root root 14 Jan 25 20:41 /usr/bin/gdb -> ../libexec/gdb*
-rwxr-xr-x 1 root root 10180296 Jan 25 20:41 /usr/libexec/gdb*
ls: cannot access '/usr/lib/debug/usr/bin/gdb-8.0.1-35.fc27.x86_64.debug': No such file or directory
-r--r--r-- 1 root root 29200464 Jan 25 20:41 /usr/lib/debug/usr/libexec/gdb-8.0.1-35.fc27.x86_64.debug
FYI that -8.0.1-35.fc27.x86_64.debug may look confusing, it was always just
.debug before.
Why is /usr/bin/gdb a symlink is offtopic for this bugreport, Fedora has it so
for some reasons.
It is always safest to look at the .debug file only after resolving all
symlinks on the binary file.
Differential revision: https://reviews.llvm.org/D42853
llvm-svn: 324224
I have found the lookup by build-id
(when lookup by /usr/lib/debug/path/name/exec.debug failed) does not work as
LLDB tries the build-id hex string in uppercase but Fedora uses lowercase.
xubuntu-16.10 also uses lowercase during my test:
/usr/lib/debug/.build-id/6c/61f3566329f43d03f812ae7057e9e7391b5ff6.debug
Differential revision: https://reviews.llvm.org/D42852
llvm-svn: 324222
into a std::string so we don't run off the end of the array when
there is no nul byte in ProcessElfCore::parseLinuxNotes.
Found with ASAN testing.
<rdar://problem/37134319>
Differential revision: https://reviews.llvm.org/D42828
llvm-svn: 324156
LLDB queries Spotlight to locate .dSYM bundles based on the UUID
embedded in a binary, and because the UUID is a hash of filename and
.text section, there *will* be conflicts inside $BUILD_DIR.
This should fix the broken green dragon bots.
llvm-svn: 324019
Remove obsolete measurements.
This check in requires at least 10.11
Reviewed: Jason Molenda, Jim Ingham
<rdar://problem/37047106> Xcode Memory gauge should show the jetsam ledger footprint rather than anonymous
llvm-svn: 324013
Using the "run_to_{source,name}_breakpoint will allow us to remove
a lot of boiler-plate from the testsuite. We mostly use source
breakpoints, but some tests use by name ones so this was needed.
llvm-svn: 324010
The mock server was sending acks back in response to spurious acks from
the client, but the client was not prepared to handle these. Most of the
time this would work because the only time the client was sending
unsolicited acks is after the initial connection, and there reply-ack
would get ignored in the "flush all packets from the server" loop which
came after the ack. However, this loop had only a 10ms delay, and
sometimes this was not enough to catch the reply (which meant the
connection got out of sync, and test failed).
Since this behavior not consistent with how lldb-server handles this
situation (it just ignores the ack), I fix the mock server to do the
same.
llvm-svn: 323953
We started passing the "all" target to make, which rendered the
"localall" trick in this Makefile inoperable.
I implement the strip step differently, and also reformat the Makefile.
llvm-svn: 323855
Initialize the default value of SymbolFileDWARF uuid with
the appropriately shifted DW_INVALID_OFFSET constant.
This change fixes the collision in the computation of DIE uid
(inside DIERef::GetUID) and incorrect CompileUnit lookup
(because of the misleading cu_offset value).
Test plan: make check-lldb
Differential revision: https://reviews.llvm.org/D42563
llvm-svn: 323832
Strings which contain garbage data can trigger an exception in the XUnit
plugin at the UTF-8 decode step because the decode is strict. Use a lax
mode to avoid an exception.
See: https://ci.swift.org/job/oss-lldb-incremental-osx/780
llvm-svn: 323817
This patch is the result of a discussion on lldb-dev, see
http://lists.llvm.org/pipermail/lldb-dev/2018-January/013111.html for
background.
For each test (should be eventually: each test configuration) a
separate build directory is created and we execute
make VPATH=$srcdir/path/to/test -C $builddir/path/to/test -f $srcdir/path/to/test/Makefile -I $srcdir/path/to/test
In order to make this work all LLDB tests need to be updated to find
the executable in the test build directory, since CWD still points at
the test's source directory, which is a requirement for unittest2.
Although we have done extensive testing, I'm expecting that this first
attempt will break a few bots. Please DO NOT HESITATE TO REVERT this
patch in order to get the bots green again. We will likely have to
iterate on this some more.
Differential Revision: https://reviews.llvm.org/D42281
llvm-svn: 323803
Summary:
The difference between this and regular LLDB_LOG is that this one clears
the error object unconditionally. This was inspired by the
ObjectFileELF bug (r322664), where the error object was being cleared
only if logging was enabled.
Reviewers: davide, zturner, jingham, clayborg
Subscribers: lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D42182
llvm-svn: 323753
The logic was incorrect because on windows, we need to look for
yaml2obj.EXE. I implement the search in terms of
distutils.spawn.find_executable, which should handle the platform
differences for us.
llvm-svn: 323744
Fix the Linux plugin lookup path to include appropriate libdir suffix
for the system. To accomplish this, store the value of
LLVM_LIBDIR_SUFFIX in lldb/Host/Config.h as LLDB_LIBDIR_SUFFIX,
and use this variable when defining the plugin path.
Differential Revision: https://reviews.llvm.org/D42317
llvm-svn: 323673
`num_args` is unsigned integer, declared as below:
```
uint32_t num_args = arg_enum->getChildCount();
```
Comparison with the signed `arg_idx` produces a warning when compiled with
-Wsign-compare flag, this patch addresses this simple issue without affecting
any functionality.
Reviewers: davide, asmith
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D42620
llvm-svn: 323645
Summary:
The ObjectFile class was used to determine the architecture of a running
process by inspecting it's main executable. There were two issues with
this:
- it's in the wrong layer
- the call can be very expensive (it can end up computing the crc of the
whole file).
Since the process is running on the host, ideally we would be able to
just query the data straight from the OS like darwin does, but there
doesn't seem to be a reasonable way to do that. So, this fixes the
layering issue by using the llvm object library to inspect the file.
Since we know the process is already running on the host, we just need
to peek at a few bytes of the elf header to determine whether it's 32-
or 64-bit (which should make this faster as well).
Pretty much the same logic was implemented in
NativeProcessProtocol::ResolveProcessArchitecture, so I delete this
logic and replace calls with GetProcessInfo.
Reviewers: eugene, krytarowski
Subscribers: mgorny, hintonda, lldb-commits
Differential Revision: https://reviews.llvm.org/D42488
llvm-svn: 323637
Summary:
Adds new utilities that make it easier to write test cases for lldb acting as a client over a gdb-remote connection.
- A GDBRemoteTestBase class that starts a mock GDB server and provides an easy way to check client packets
- A MockGDBServer that, via MockGDBServerResponder, can be made to issue server responses that test client behavior.
- Utility functions for handling common data encoding/decoding
- Utility functions for creating dummy targets from YAML files
----
Split from the review at https://reviews.llvm.org/D42145, which was a new feature that necessitated the new testing capabilities.
Reviewers: clayborg, labath
Reviewed By: clayborg, labath
Subscribers: hintonda, davide, jingham, krytarowski, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D42195
Patch by Owen Shaw <llvm@owenpshaw.net>
llvm-svn: 323636
Now the function returns `False`, and the caller can take the
appropriate action (in this case, for --executable, reporting
that the file doesn't exist).
llvm-svn: 323566
TestLibcxxListLoop - fails because the evil "define private public"
trick does not work with gmodules. The purpose of the test is not to
test debug info parsing so I just mark it as no_debug_info_testcase.
In the long term it may be interesting to write a mock std::list which
will allow us to test bad inputs to data formatters more easily.
TestGModules - seems to be a genuine bug. Filed pr36107 and xfailed.
llvm-svn: 323520
This test #include's stdio.h, which, on at least two bots results in a
module import of MacTypes.h (due to weird SDK layering issues), which
causes the test to fail to compile.
Just don't #include stdio.h, as it's not needed for the test.
llvm-svn: 323467
Stale global module caches cause problems for the bots. The modules
become invalid when clang headers are updated by version control, and
tests which use these modules fail to compile, e.g:
fatal error: file '.../__stddef_max_align_t.h' has been modified since the module file '/var/.../Darwin.pcm' was built
note: please rebuild precompiled header '/var/.../Darwin.pcm'
Eventually we should transition to having just a single module cache to speed
tests up. This patch should be just enough to fix the spurious bot failures due
to stale caches.
rdar://36479805, also related to llvm.org/PR36048
Differential Revision: https://reviews.llvm.org/D42277
llvm-svn: 323450
Summary:
- Fix a null array access bug. This happens when creating the lldb type for a function that has no argument.
- Implement SymbolFilePDB::ParseTypes method. Using `lldb-test symbols` will show all supported types in the target.
- Create lldb types for variadic function, PDBSymbolTypePointer, PDBSymbolTypeBuiltin
- The underlying builtin type for PDBSymbolTypeEnum is always `Int`, correct it with the very first enumerator's encoding if any. This is more accurate when the underlying type is not signed or another integer type.
- Fix a bug when the compiler type is not created based on PDB_BuiltinType. For example, basic type `long` is of same width as `int` in a 32-bit target, and the compiler type of former one will be represented by the one generated for latter if using the default method. Introduce a static function GetBuiltinTypeForPDBEncodingAndBitSize to correct this issue.
- Basic type `long double` and `double` have the same bit size in MSVC and there is no information in a PDB to distinguish them. The compiler type of the former one is represented by the latter's.
- There is no line information about typedef, enum etc in a PDB and the source and line information for them are not shown.
- There is no information about scoped enumeration. The compiler type is represented as an unscoped one.
Reviewers: zturner, lldb-commits
Reviewed By: zturner
Subscribers: majnemer, llvm-commits
Differential Revision: https://reviews.llvm.org/D42434
llvm-svn: 323255
Summary: The GoParser is leaking memory in the tests due to not freeing allocated nodes when encountering some parsing errors. With this patch all GoParser tests are passing with enabled memory sanitizers/ubsan.
Reviewers: labath, davide
Reviewed By: labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D42409
llvm-svn: 323197
Summary:
It's possible to hit an unaligned memory read when reading `source_length` as the `data` array is only aligned with 2 bytes (it's actually a UTF16 array). This patch memcpy's `source_length` into a local variable to prevent this:
```
MinidumpTypes.cpp:49:23: runtime error: load of misaligned address 0x7f0f4792692a for type 'const uint32_t' (aka 'const unsigned int'), which requires 4 byte alignment
```
Reviewers: dvlahovski, zturner, davide
Reviewed By: davide
Subscribers: davide, lldb-commits
Differential Revision: https://reviews.llvm.org/D42348
llvm-svn: 323181
building method override tables for CXXMethodDecls in
DWARFASTParserClang::CompleteTypeFromDWARF.
C++ virtual method calls in LLDB expressions may fail if the override table for
the method being called is not correct as IRGen will produce references to the
wrong (or a missing) vtable entry.
This patch does not fix calls to virtual methods with covariant return types as
it mistakenly treats these as overloads, rather than overrides. This will be
addressed in a future patch.
Review: https://reviews.llvm.org/D41997
Partially fixes <rdar://problem/14205774>
llvm-svn: 323163
Summary: We can't use unique_ptr's here because we use those variables as `out` parameters to some functions. Discovered by the memory sanitizer.
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D42386
llvm-svn: 323138
Summary:
`m_last_tok` isn't initialized anywhere before it's used the first time (most likely in the `GoParser::Rule::error` method), which causes most of the GoParser tests to fail with sanitizers enabled with errors like this:
```
GoParser.cpp:52:21: runtime error: load of value <random value>, which is not a valid value for type 'GoLexer::TokenType'
UndefinedBehaviorSanitizer: undefined-behavior GoParser.cpp:52:21
```
Reviewers: ribrdb, davide, labath
Reviewed By: labath
Subscribers: labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D42339
llvm-svn: 323119
Summary:
This patch implements the ABI Plugin for PPC64le. It was based on the
ABI for PPC64. It also enables LLDB to evaluate expressions using JIT.
Reviewers: labath, clayborg, jhibbits, davide
Reviewed By: labath, clayborg, jhibbits, davide
Subscribers: davide, JDevlieghere, chmeee, emaste, jhibbits, hfinkel, lldb-commits, nemanjai, luporl, lbianc, mgorny, anajuliapc, kbarton
Differential Revision: https://reviews.llvm.org/D41702
Patch by Alexandre Yukio Yamashita <alexandre.yamashita@eldorado.org.br>
llvm-svn: 323100
Summary:
We copy the local variable `Resolved` into `Storage` to keep it around. However, we then still let the `SearchDir` ref point to `Resolved` which then is used to access the already freed memory later on. With this patch we point to `Storage` which doesn't get deleted after the current scope exits.
Discovered by memory sanitizer in the CompletionTest.DirCompletionUsername test.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D42346
llvm-svn: 323082
Summary: float can't represent the given value in the literal, so we get this UB error: `runtime error: 1.23457e+48 is outside the range of representable values of type 'float'`. The test seems to not rely on this specific value, so let's just choose a smaller one that can be represented.
Reviewers: uweigand
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D42338
llvm-svn: 323081
Summary: We never delete the created instances, so those test fail with the memory sanitizer.
Reviewers: jasonmolenda
Reviewed By: jasonmolenda
Subscribers: aemerson, javed.absar, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D42336
llvm-svn: 323076
Clean up needless+missing #include "DWARFCompileUnit.h" for split of
DWARFCompileUnit to DWARFUnit as discussed in D40466.
Differential revision: https://reviews.llvm.org/D42355
llvm-svn: 323069
Summary:
This patch adds missing includes to the LLDB headers inside `include/` as a first step of building LLDB's source with C++ modules. It also fixes this single `stds::` typo.
Some quick map why some non-obvious includes were necessary:
* lldb/lldb-defines.h for LLDB_INVALID_ADDRESS
* lldb/lldb-types.h for addr_t
* lldb/lldb-defines.h for DISALLOW_COPY_AND_ASSIG
* lldb/DataFormatters/TypeSynthetic.h for SyntheticChildrenFrontEnd
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: zturner, lldb-commits
Differential Revision: https://reviews.llvm.org/D42340
llvm-svn: 323064
Summary:
- Fix a null array access bug. This happens when creating the lldb type for a function that has no argument.
- Implement SymbolFilePDB::ParseTypes method. Using `lldb-test symbols` will show all supported types in the target.
- Create lldb types for variadic function, PDBSymbolTypePointer, PDBSymbolTypeBuiltin
- The underlying builtin type for PDBSymbolTypeEnum is always `Int`, correct it with the very first enumerator's encoding if any. This is more accurate when the underlying type is not signed or another integer type.
- Fix a bug when the compiler type is not created based on PDB_BuiltinType. For example, basic type `long` is of same width as `int` in a 32-bit target, and the compiler type of former one will be represented by the one generated for latter if using the default method. Introduce a static function GetBuiltinTypeForPDBEncodingAndBitSize to correct this issue.
- Basic type `long double` and `double` have the same bit size in MSVC and there is no information in a PDB to distinguish them. The compiler type of the former one is represented by the latter's.
- There is no line informaton about typedef, enum etc in a PDB and the source and line information for them are not shown.
- There is no information about scoped enumeration. The compiler type is represented as an unscoped one.
Reviewers: zturner, lldb-commits, davide, asmith
Reviewed By: zturner, asmith
Subscribers: llvm-commits, davide
Differential Revision: https://reviews.llvm.org/D41427
llvm-svn: 322995
Summary:
These were used by Host::LaunchProcess to "resolve" the executable it
was about to launch. The only parts of Platform::ResolveExecutable, which
seem to be relevant here are the FileSpec::ResolvePath and
ResolveExecutableLocation calls.
The rest (most) of that function deals with selecting an architecture
out of a fat binary and making sure we are able to create a Module with that
slice. These are reasonable actions when selecting a binary to debug,
but not for a generic process launching framework (it's technically even
wrong because we should be able to launch a binary with execute
permissions only, but trying to parse such file will obviously fail).
I remove the platform call by inlining the relevant FileSpec calls and
ignoring the rest of the Platform::ResolveExecutable code. The
architecture found by the slice-searching code is being ignored already
anyway, as we use the one specified in the LaunchInfo, so the only
effect of this should be a different error message in case the
executable does not contain the requested architecture -- before we
would get an error message from the Platform class, but now we will get
an error from the actual posix_spawn syscall (this is only relevant on
mac, as it's the only target supporting fat binaries).
Launching targets for debugging should not be affected as here the
executable is pre-resolved at the point when the Target is created.
Reviewers: jingham, clayborg
Subscribers: lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D41902
llvm-svn: 322935
Refactor in r322653 broke the logging test on windows because MSVC uses
a fully qualified name as the value of __FUNCTION__, which is not what
we were expecting. I'm changing the code to use the more portable
__func__, which behaves the same as on clang/gcc.
The standard still says that the value of __func__ is implementation
defined, so if we run into problems with this test again we may just
need to drop it.
llvm-svn: 322834
On Darwin, if a test machine isn't set up for code-signing (see
docs/code-signing.txt), running check-lldb should use the system
debugserver instead of the unsigned one built in-tree. This makes it
possible to run lldb's test suite without having code-signing set up,
which is really convenient.
Differential Revision: https://reviews.llvm.org/D42215
llvm-svn: 322803
Due to an unfortunate difference between the open source test harness
and our internal harness, applying two @skip... decorators to this test
works in the internal build but not in the open source build.
I've tried another approach to skipping this test and tested it out with
the open source harness. Hopefully this sticks!
rdar://36417163
llvm-svn: 322756
This test frequently times out on our bots. While we're investigating
the issue, mark the test as skipped so the builds aren't impacted as
much.
rdar://36417163
llvm-svn: 322728
Summary:
LLDB's DumpDataExtractor was not prepared to handle PowerPC's long double type: PPCDoubleDouble.
As it is somewhat special, treating it as other regular float types resulted in getting wrong information about it.
In this particular case, llvm::APFloat::getSizeInBits(PPCDoubleDouble) was returning 0.
This caused the TestSetValues.py test to fail, because lldb would abort on an assertion failure on APInt(), because of the invalid size.
Since in the PPC case the value of item_byte_size was correct and the
getSizeInBits call was only added to support x87DoubleExtended
semantics, this restricts the usage of getSizeInBits to the x87
semantics.
Reviewers: labath, clayborg
Reviewed By: labath
Subscribers: llvm-commits, anajuliapc, alexandreyy, lbianc, lldb-commits
Differential Revision: https://reviews.llvm.org/D42083
Author: Leandro Lupori <leandro.lupori@gmail.com>
llvm-svn: 322666
In D40616 I (mistakenly) assumed that logging an llvm::Error would clear
it. This of course is only true if logging is actually enabled.
This fixes the assertion by manually clearing the error, but it raises
the point of whether we need a special error-clearing logging primitive.
llvm-svn: 322664
This removes boilerplate for setting up a log channel and capturing the
output from some of the tests. I do this by moving the setup code into a
test fixture and adding a logAndTakeOutput utility function to log some
string and then retrieve it from the log.
I also use some googlemock goodies to simplify a couple of assertions.
llvm-svn: 322653
The comment seems to indicate that this function would return the "bin"
directory on linux. I've verified that this is not the case, so I'm
updating the comment to match.
llvm-svn: 322472
Summary:
This commit is a combination of the following changes:
- Cache PDB's global scope (executable) in SymbolFilePDB
- Change naming of `cu` to `compiland` which is PDB specific
- Change ParseCompileUnitForSymIndex to ParseCompileUnitForUID.
Prefer using a common name `UID` instead of PDB's `System Index`
Adding one more argument `index` to this method, which is used to
specify the index of the compile unit in a cached compile unit array
- Add GetPDBCompilandByUID method to simply code
- Fix a bug in getting the source file name for a PDB compiland.
For some reason, PDBSymbolCompiland::getSourceFileName() could
return an empty name, so if that is true, we have to walk through all
source files of this compiland and determine the right source file
used to generate this compiland based on language indicated.
The previous implementation called PDBSession::findOneSourceFile
method to get its name for the compiland. This is not accurate since
the `one source file` found could be a header other than source file.
Reviewers: zturner, lldb-commits
Reviewed By: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41428
llvm-svn: 322433
of a dSYM per-uuid plist that may be present (dsymutil does not
create this plist, it is only added after the fact by additional
tools) -- either the DBGBuildSourcePath + DBGSourcePath pair of
k-v entries which give us the build-time and debug-time remapping,
or the newer DBGSourcePathRemapping dictionary which may give us
multiple remappings.
I'm changing the order that we process these & add them to the
list of source remappings. If the DBGSourcePathRemapping dict
is present, it should be the first entries we will try.
<rdar://problem/36481989>
llvm-svn: 322418
RemoveInvalidLocations was clearing out the m_locations in the
breakpoint by hand, and it wasn't also clearing the locations from
the address->location map, which confused us when we went to update
breakpoint locations.
I also made Breakpoint::ModulesChanged check the Location's Section
to make sure it hadn't been deleted. This shouldn't strictly be necessary,
but if the DynamicLoaderPlugin doesn't do it's job right (I'm looking at
you new Darwin DynamicLoader...) then it can end up leaving stale locations
on rerun. It doesn't hurt to clean them up here as a backstop.
<rdar://problem/36134350>
llvm-svn: 322348
This test stresses expression evaluation support for template functions.
Currently the support is rudimentary, and running this test causes assertion
failures in clang. This test cannot be XFAIL'ed because the test harness
treats assertion failures as unexpected events. For now, the test must be
skipped.
llvm-svn: 322340
been specified yet (either by the user, or by one of the lldb
extensions like qHostInfo or qProcessInfo), and the target.xml
includes a <architecture> tag specifying x86_64, set the architecture
appropriately.
I'm not sure what we can expect to see in the <architecture> tag, so
I'm only doing this for x86_64 right now where I've seen "i386:x86_64"
used. I've seen a target.xml from a jtag board that sends just "arm"
because it doesn't know more specifically what type of board it is
connected to...
<rdar://problem/29908970>
llvm-svn: 322339
Summary:
Actually, fix two issues:
# remove repeat creation of reg_info, use m_reg_info_ap for createMCAsmInfo instead;
# remove possibility to dereference nullptr during createMCAsmInfo invocation, that could lead to undefined behavior.
Placed checking of a component right after its creation to simplify the code and avoid same issues later.
Reviewers: zturner, clayborg, jingham, jasonmolenda, labath
Reviewed By: clayborg, labath
Subscribers: labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D41584
llvm-svn: 322270
When rendezvous structure is not initialized we need to set up
rendezvous breakpoint anyway. In this case the code will locate
dynamic loader (interpreter) and look for known function names.
This is r322209, but with fixed VDSO loading fixed.
Bug: https://bugs.llvm.org/show_bug.cgi?id=25806
Differential Revision: https://reviews.llvm.org/D41533
llvm-svn: 322251
from being listed as a part of the desktop or
desktop/desktop_no_xpc Targets - they should not be
a part of any target. Having them listed as a part of
desktop target results in them being added to the
Copy Files build phase for desktop and I'm guessing
they'd end up in the manpage directory or something.
llvm-svn: 322237
When rendezvous structure is not initialized we need to set up
rendezvous breakpoint anyway. In this case the code will locate
dynamic loader (interpreter) and look for known function names.
Bug: https://bugs.llvm.org/show_bug.cgi?id=25806
Differential Revision: https://reviews.llvm.org/D41533
llvm-svn: 322209
Summary:
Gdb servers like openocd may send many $O reply packets for the client to output during a qRcmd command sequence. Currently, lldb interprets the first O packet as an unexpected response. Besides generating no output, this causes lldb to get out of sync with future commands because it continues reading O packets from the first command as response to subsequent commands.
This patch handles any O packets during an qRcmd, treating the first non-O packet as the true response.
Preliminary discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013078.html
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D41745
Patch by Owen Shaw <llvm@owenpshaw.net>
llvm-svn: 322190
the previous fix did not work because of different const qualifications
on the envp pointer.
This should resolve that (and remove a couple of const_casts in the
process).
llvm-svn: 322187
Summary:
There was some confusion in the code about how to represent process
environment. Most of the code (ab)used the Args class for this purpose,
but some of it used a more basic StringList class instead. In either
case, the fact that the underlying abstraction did not provide primitive
operations for the typical environment operations meant that even a
simple operation like checking for an environment variable value was
several lines of code.
This patch adds a separate Environment class, which is essentialy a
llvm::StringMap<std::string> in disguise. To standard StringMap
functionality, it adds a couple of new functions, which are specific to
the environment use case:
- (most important) envp conversion for passing into execve() and likes.
Instead of trying to maintain a constantly up-to-date envp view, it
provides a function which creates a envp view on demand, with the
expectation that this will be called as the very last thing before
handing the value to the system function.
- insert(StringRef KeyEqValue) - splits KeyEqValue into (key, value)
pair and inserts it into the environment map.
- compose(value_type KeyValue) - takes a map entry and converts in back
into "KEY=VALUE" representation.
With this interface most of the environment-manipulating code becomes
one-liners. The only tricky part was maintaining compatibility in
SBLaunchInfo, which expects that the environment entries are accessible
by index and that the returned const char* is backed by the launch info
object (random access into maps is hard and the map stores the entry in
a deconstructed form, so we cannot just return a .c_str() value). To
solve this, I have the SBLaunchInfo convert the environment into the
"envp" form, and use it to answer the environment queries. Extra code is
added to make sure the envp version is always in sync.
(This also improves the layering situation as Args was in the Interpreter module
whereas Environment is in Utility.)
Reviewers: zturner, davide, jingham, clayborg
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D41359
llvm-svn: 322174
Summary:
This used to be important when all tests were run in a single process,
but that has no longer been the case for a while. Furthermore, this hook fails
to build on new mac versions for several people, and it's not clear
whether fixing it is worth the effort.
Reviewers: jingham, clayborg, davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D41871
llvm-svn: 322167
(built with Xcode) from 10.9 to 10.11. It also enables the use of
libcompression in debugserver by default (these API are only present
in macOS 10.11 and newer -- 10.11 was released c. Sep 2015).
I don't know if we have people / bots building lldb on older mac
releases; if this turns out to be a problem I will revert the change.
There are some parts of lldb (e.g. debugserer's ability to report
the OS version #) that only work with 10.10 and this changes the
behavior of lldb (whether the older or newer dyld interfaces are
used) so there is some importance to updating the min required
version.
llvm-svn: 322128
The HAVE_LIBZ variable is not exported by LLVM, and therefore is not
available in stand-alone builds of other tools. Use LLVM_ENABLE_ZLIB
which is the name under which the effective value is exported.
Additional, use llvm_canonicalize_cmake_booleans() to make sure that
a correct (Python-safe) boolean value is passed down to lit.
Differential Revision: https://reviews.llvm.org/D41725
llvm-svn: 322081
Ed Maste