Summary:
This patch introduces initial `AAValueSimplify` which simplifies a value in a context.
example
- (for function returned) If all the return values are the same and constant, then we can replace callsite returned with the constant.
- If an internal function takes the same value(constant) as an argument in the callsite, then we can replace the argument with that constant.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66967
llvm-svn: 371291
Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
llvm-svn: 371284
Add the new method `LibCallSimplifier::substituteInParent()` that calls
`LibCallSimplifier::replaceAllUsesWith()' and
`LibCallSimplifier::eraseFromParent()` back to back, simplifying the
resulting code.
llvm-svn: 371264
Summary:
Here we try to avoid issues with "explicit branch" with SimplifyBranchOnICmpChain
which can check on undef. Msan by design reports branches on uninitialized
memory and undefs, so we have false report here.
In general msan does not like when we convert
```
// If at least one of them is true we can MSAN is ok if another is undefs
if (a || b)
return;
```
into
```
// If 'a' is undef MSAN will complain even if 'b' is true
if (a)
return;
if (b)
return;
```
Example
Before optimization we had something like this:
```
while (true) {
bool maybe_undef = doStuff();
while (true) {
char c = getChar();
if (c != 10 && c != 13)
continue
break;
}
// we know that c == 10 || c == 13 if we get here,
// so msan know that branch is not affected by maybe_undef
if (maybe_undef || c == 10 || c == 13)
continue;
return;
}
```
SimplifyBranchOnICmpChain will convert that into
```
while (true) {
bool maybe_undef = doStuff();
while (true) {
char c = getChar();
if (c != 10 && c != 13)
continue;
break;
}
// however msan will complain here:
if (maybe_undef)
continue;
// we know that c == 10 || c == 13, so either way we will get continue
switch(c) {
case 10: continue;
case 13: continue;
}
return;
}
```
Reviewers: eugenis, efriedma
Reviewed By: eugenis, efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67205
llvm-svn: 371138
A follow-up for r329011.
This may be changed to produce @llvm.sub.with.overflow in a later patch,
but for now just make things more consistent overall.
A few observations stem from this:
* There does not seem to be a similar one-instruction fold for uadd-overflow
* I'm not sure we'll want to canonicalize `B u> A` as `usub.with.overflow`,
so since the `icmp` here no longer refers to `sub`,
reconstructing `usub.with.overflow` will be problematic,
and will likely require standalone pass (similar to DivRemPairs).
https://rise4fun.com/Alive/Zqs
Name: (A - B) u> A --> B u> A
%t0 = sub i8 %A, %B
%r = icmp ugt i8 %t0, %A
=>
%r = icmp ugt i8 %B, %A
Name: (A - B) u<= A --> B u<= A
%t0 = sub i8 %A, %B
%r = icmp ule i8 %t0, %A
=>
%r = icmp ule i8 %B, %A
Name: C u< (C - D) --> C u< D
%t0 = sub i8 %C, %D
%r = icmp ult i8 %C, %t0
=>
%r = icmp ult i8 %C, %D
Name: C u>= (C - D) --> C u>= D
%t0 = sub i8 %C, %D
%r = icmp uge i8 %C, %t0
=>
%r = icmp uge i8 %C, %D
llvm-svn: 371101
If we have:
bb5:
br i1 %arg3, label %bb6, label %bb7
bb6:
%tmp = getelementptr inbounds i32, i32* %arg1, i64 2
store i32 3, i32* %tmp, align 4
br label %bb9
bb7:
%tmp8 = getelementptr inbounds i32, i32* %arg1, i64 2
store i32 3, i32* %tmp8, align 4
br label %bb9
bb9: ; preds = %bb4, %bb6, %bb7
...
We can't sink stores directly into bb9.
This patch creates new BB that is successor of %bb6 and %bb7
and sinks stores into that block.
SplitFooterBB is the parameter to the pass that controls
that behavior.
Change-Id: I7fdf50a772b84633e4b1b860e905bf7e3e29940f
Differential: https://reviews.llvm.org/D66234
llvm-svn: 371089
Summary:
Avoid visiting an instruction more than once by using a map.
This is similar to https://reviews.llvm.org/rL361416.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67198
llvm-svn: 371086
This patch merges the sancov module and funciton passes into one module pass.
The reason for this is because we ran into an out of memory error when
attempting to run asan fuzzer on some protobufs (pc.cc files). I traced the OOM
error to the destructor of SanitizerCoverage where we only call
appendTo[Compiler]Used which calls appendToUsedList. I'm not sure where precisely
in appendToUsedList causes the OOM, but I am able to confirm that it's calling
this function *repeatedly* that causes the OOM. (I hacked sancov a bit such that
I can still create and destroy a new sancov on every function run, but only call
appendToUsedList after all functions in the module have finished. This passes, but
when I make it such that appendToUsedList is called on every sancov destruction,
we hit OOM.)
I don't think the OOM is from just adding to the SmallSet and SmallVector inside
appendToUsedList since in either case for a given module, they'll have the same
max size. I suspect that when the existing llvm.compiler.used global is erased,
the memory behind it isn't freed. I could be wrong on this though.
This patch works around the OOM issue by just calling appendToUsedList at the
end of every module run instead of function run. The same amount of constants
still get added to llvm.compiler.used, abd we make the pass usage and logic
simpler by not having any inter-pass dependencies.
Differential Revision: https://reviews.llvm.org/D66988
llvm-svn: 370971
Summary:
Instead of building attributes for internal functions which we do not
update as long as we assume they are dead, we now do not create
attributes until we assume the internal function to be live. This
improves the number of required iterations, as well as the number of
required updates, in real code. On our tests, the results are mixed.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66914
llvm-svn: 370924
Summary:
We create attributes on-demand so we need to check the white list
on-demand. This also unifies the location at which we create,
initialize, and eventually invalidate new abstract attributes.
The tests show mixed results, a few more call site attributes are
determined which can cause more iterations.
Reviewers: uenoku, sstefan1
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66913
llvm-svn: 370922
Summary:
Before we tried to rule out non-exact definitions early but that lead to
on-demand attributes created for them anyway. As a consequence we needed
to look at the definition in the initialize of each attribute again.
This patch centralized this lookup and tightens the condition under
which we give up on non-exact definitions.
Reviewers: uenoku, sstefan1
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67115
llvm-svn: 370917
SROA pass processes debug info incorrecly if applied twice.
Specifically, after SROA works first time, instcombine converts dbg.declare
intrinsics into dbg.value. Inlining creates new opportunities for SROA,
so it is called again. This time it does not handle correctly previously
inserted dbg.value intrinsics.
Differential Revision: https://reviews.llvm.org/D64595
llvm-svn: 370906
When I dug into this, it turns out to be *much* more involved than I'd realized and doesn't actually simplify anything.
The general purpose of the leader table is that we want to find the most-dominating definition quickly. The problem for equivalance folding is slightly different; we want to find the most dominating *value* whose definition block dominates our use quickly.
To make this change, we'd end up having to restructure the leader table (either the sorting thereof, or maybe even introducing multiple leader tables per value) and that complexity is just not worth it.
llvm-svn: 370824
Add the no-capture argument attribute deduction to the Attributor
fixpoint framework.
The new string attributed "no-capture-maybe-returned" is introduced to
allow deduction of no-capture through functions that "capture" an
argument but only by "returning" it. It is only used by the Attributor
for testing.
Differential Revision: https://reviews.llvm.org/D59922
llvm-svn: 370817
This extends the existing logic for propagating constant expressions in an analogous manner for what we do across basic blocks. The core point is that we chose some order of operands, and canonicalize uses towards that one.
The heuristic used is inspired by the one used across blocks; in a follow up change, I'd plan to common them so that the cross block version uses the slightly stronger ordering herein.
As noted by the TODOs in the code, there's a good amount of room for improving the existing code and making it more powerful. Some follow up work planned.
Differential Revision: https://reviews.llvm.org/D66977
llvm-svn: 370791
Summary:
Fold-tail currently supports reduction last-vector-value live-out's,
but has yet to support last-scalar-value live-outs, including
non-header phi's. As it relies on AllowedExit in order to detect
them and bail out we need to add the non-header PHI nodes to
AllowedExit, otherwise we end up with miscompiles.
Solves https://bugs.llvm.org/show_bug.cgi?id=43166
Reviewers: fhahn, Ayal
Reviewed By: fhahn, Ayal
Subscribers: anna, hiraditya, rkruppe, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67074
llvm-svn: 370721
Now that we allow tail-folding, not only when we optimise for size, make
sure we do not run in this assert.
Differential revision: https://reviews.llvm.org/D66932
llvm-svn: 370711
The loop vectorizer was running in an assert when it tried to fold the tail and
had to emit runtime memory disambiguation checks.
Differential revision: https://reviews.llvm.org/D66803
llvm-svn: 370707
bitcast <N x i8> (shuf X, undef, <N, N-1,...0>) to i{N*8} --> bswap (bitcast X to i{N*8})
In PR43146:
https://bugs.llvm.org/show_bug.cgi?id=43146
...we have a more complicated case where SLP is making a mess of bswap. This patch won't
do anything for that currently, but we need to improve bswap recognition in instcombine,
SLP, and/or a standalone pass to avoid that problem.
This is limited using the data-layout so we don't try to do this transform with actual
vector types. The backend does not appear to have folds to convert in either direction,
so we don't want to mess up something that is actually better lowered as a shuffle.
On x86, we're trading something like this:
vmovd %edi, %xmm0
vpshufb LCPI0_0(%rip), %xmm0, %xmm0 ## xmm0 = xmm0[3,2,1,0,u,u,u,u,u,u,u,u,u,u,u,u]
vmovd %xmm0, %eax
For:
movl %edi, %eax
bswapl %eax
Differential Revision: https://reviews.llvm.org/D66965
llvm-svn: 370659
Summary:
Back-end currently expands mempcpy, but middle-end should work with memcpy instead of mempcpy to enable more memcpy-optimization.
GCC backend emits mempcpy, so LLVM backend could form it too, if we know mempcpy libcall is better than memcpy + n.
https://godbolt.org/z/dOCG96
Reviewers: efriedma, spatel, craig.topper, RKSimon, jdoerfert
Reviewed By: efriedma
Subscribers: hjl.tools, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65737
llvm-svn: 370593
Use a { iN undef, i1 false } struct as the base, and only insert
the first operand, instead of using { iN undef, i1 undef } as the
base and inserting both. This is the same as what we do in InstCombine.
Differential Revision: https://reviews.llvm.org/D67034
llvm-svn: 370573
cold versus function being newly added.
This is the second half of https://reviews.llvm.org/D66374.
Profile symbol list is the collection of function symbols showing up in
the binary which generates the current profile. It is used to discriminate
function being cold versus function being newly added. Profile symbol list
is only added for profile with ExtBinary format.
During profile use compilation, when profile-sample-accurate is enabled,
a function without profile will be regarded as cold only when it is
contained in that list.
Differential Revision: https://reviews.llvm.org/D66766
llvm-svn: 370563
This is an updated version of https://reviews.llvm.org/D66909 to fix PR42605.
Basically, current phi translatation translates an old value number to an new
value number for a call instruction based on the literal equality of call
expression, without verifying there is no clobber in between. This is incorrect.
To get a finegrain check, use MachineDependence analysis to do the job. However,
this is still not ideal. Although given a call instruction,
`MemoryDependenceResults::getCallDependencyFrom` returns identical call
instructions without clobber in between using MemDepResult with its DepType to
be `Def`. However, identical is too strict here and we want it to be relaxed a
little to consider phi-translation -- callee is the same, param operands can be
different. That means changing the semantic of `MemDepResult::Def` and I don't
know the potential impact.
So currently the patch is still conservative to only handle
MemDepResult::NonFuncLocal, which means the current call has no function local
clobber. If there is clobber, even if the clobber doesn't stand in between the
current call and the call with the new value, we won't do phi-translate.
Differential Revision: https://reviews.llvm.org/D67013
llvm-svn: 370547
Summary:
Instead of recomputing information for call sites we now use the
function information directly. This is always valid and once we have
call site specific information we can improve here.
This patch also bootstraps attributes that are created on-demand through
an initial update call. Information that is known will then directly be
available in the new attribute without causing an iteration delay.
The tests show how this improves the iteration count.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66781
llvm-svn: 370480
Summary:
Any pointer could have load/store users not only floating ones so we
move the manifest logic for alignment into the AAAlignImpl class.
Reviewers: uenoku, sstefan1
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66922
llvm-svn: 370479
Summary:
@mclow.lists brought up this issue up in IRC.
It is a reasonably common problem to compare some two values for equality.
Those may be just some integers, strings or arrays of integers.
In C, there is `memcmp()`, `bcmp()` functions.
In C++, there exists `std::equal()` algorithm.
One can also write that function manually.
libstdc++'s `std::equal()` is specialized to directly call `memcmp()` for
various types, but not `std::byte` from C++2a. https://godbolt.org/z/mx2ejJ
libc++ does not do anything like that, it simply relies on simple C++'s
`operator==()`. https://godbolt.org/z/er0Zwf (GOOD!)
So likely, there exists a certain performance opportunities.
Let's compare performance of naive `std::equal()` (no `memcmp()`) with one that
is using `memcmp()` (in this case, compiled with modified compiler). {F8768213}
```
#include <algorithm>
#include <cmath>
#include <cstdint>
#include <iterator>
#include <limits>
#include <random>
#include <type_traits>
#include <utility>
#include <vector>
#include "benchmark/benchmark.h"
template <class T>
bool equal(T* a, T* a_end, T* b) noexcept {
for (; a != a_end; ++a, ++b) {
if (*a != *b) return false;
}
return true;
}
template <typename T>
std::vector<T> getVectorOfRandomNumbers(size_t count) {
std::random_device rd;
std::mt19937 gen(rd());
std::uniform_int_distribution<T> dis(std::numeric_limits<T>::min(),
std::numeric_limits<T>::max());
std::vector<T> v;
v.reserve(count);
std::generate_n(std::back_inserter(v), count,
[&dis, &gen]() { return dis(gen); });
assert(v.size() == count);
return v;
}
struct Identical {
template <typename T>
static std::pair<std::vector<T>, std::vector<T>> Gen(size_t count) {
auto Tmp = getVectorOfRandomNumbers<T>(count);
return std::make_pair(Tmp, std::move(Tmp));
}
};
struct InequalHalfway {
template <typename T>
static std::pair<std::vector<T>, std::vector<T>> Gen(size_t count) {
auto V0 = getVectorOfRandomNumbers<T>(count);
auto V1 = V0;
V1[V1.size() / size_t(2)]++; // just change the value.
return std::make_pair(std::move(V0), std::move(V1));
}
};
template <class T, class Gen>
void BM_bcmp(benchmark::State& state) {
const size_t Length = state.range(0);
const std::pair<std::vector<T>, std::vector<T>> Data =
Gen::template Gen<T>(Length);
const std::vector<T>& a = Data.first;
const std::vector<T>& b = Data.second;
assert(a.size() == Length && b.size() == a.size());
benchmark::ClobberMemory();
benchmark::DoNotOptimize(a);
benchmark::DoNotOptimize(a.data());
benchmark::DoNotOptimize(b);
benchmark::DoNotOptimize(b.data());
for (auto _ : state) {
const bool is_equal = equal(a.data(), a.data() + a.size(), b.data());
benchmark::DoNotOptimize(is_equal);
}
state.SetComplexityN(Length);
state.counters["eltcnt"] =
benchmark::Counter(Length, benchmark::Counter::kIsIterationInvariant);
state.counters["eltcnt/sec"] =
benchmark::Counter(Length, benchmark::Counter::kIsIterationInvariantRate);
const size_t BytesRead = 2 * sizeof(T) * Length;
state.counters["bytes_read/iteration"] =
benchmark::Counter(BytesRead, benchmark::Counter::kDefaults,
benchmark::Counter::OneK::kIs1024);
state.counters["bytes_read/sec"] = benchmark::Counter(
BytesRead, benchmark::Counter::kIsIterationInvariantRate,
benchmark::Counter::OneK::kIs1024);
}
template <typename T>
static void CustomArguments(benchmark::internal::Benchmark* b) {
const size_t L2SizeBytes = []() {
for (const benchmark::CPUInfo::CacheInfo& I :
benchmark::CPUInfo::Get().caches) {
if (I.level == 2) return I.size;
}
return 0;
}();
// What is the largest range we can check to always fit within given L2 cache?
const size_t MaxLen = L2SizeBytes / /*total bufs*/ 2 /
/*maximal elt size*/ sizeof(T) / /*safety margin*/ 2;
b->RangeMultiplier(2)->Range(1, MaxLen)->Complexity(benchmark::oN);
}
BENCHMARK_TEMPLATE(BM_bcmp, uint8_t, Identical)
->Apply(CustomArguments<uint8_t>);
BENCHMARK_TEMPLATE(BM_bcmp, uint16_t, Identical)
->Apply(CustomArguments<uint16_t>);
BENCHMARK_TEMPLATE(BM_bcmp, uint32_t, Identical)
->Apply(CustomArguments<uint32_t>);
BENCHMARK_TEMPLATE(BM_bcmp, uint64_t, Identical)
->Apply(CustomArguments<uint64_t>);
BENCHMARK_TEMPLATE(BM_bcmp, uint8_t, InequalHalfway)
->Apply(CustomArguments<uint8_t>);
BENCHMARK_TEMPLATE(BM_bcmp, uint16_t, InequalHalfway)
->Apply(CustomArguments<uint16_t>);
BENCHMARK_TEMPLATE(BM_bcmp, uint32_t, InequalHalfway)
->Apply(CustomArguments<uint32_t>);
BENCHMARK_TEMPLATE(BM_bcmp, uint64_t, InequalHalfway)
->Apply(CustomArguments<uint64_t>);
```
{F8768210}
```
$ ~/src/googlebenchmark/tools/compare.py --no-utest benchmarks build-{old,new}/test/llvm-bcmp-bench
RUNNING: build-old/test/llvm-bcmp-bench --benchmark_out=/tmp/tmpb6PEUx
2019-04-25 21:17:11
Running build-old/test/llvm-bcmp-bench
Run on (8 X 4000 MHz CPU s)
CPU Caches:
L1 Data 16K (x8)
L1 Instruction 64K (x4)
L2 Unified 2048K (x4)
L3 Unified 8192K (x1)
Load Average: 0.65, 3.90, 4.14
---------------------------------------------------------------------------------------------------
Benchmark Time CPU Iterations UserCounters...
---------------------------------------------------------------------------------------------------
<...>
BM_bcmp<uint8_t, Identical>/512000 432131 ns 432101 ns 1613 bytes_read/iteration=1000k bytes_read/sec=2.20706G/s eltcnt=825.856M eltcnt/sec=1.18491G/s
BM_bcmp<uint8_t, Identical>_BigO 0.86 N 0.86 N
BM_bcmp<uint8_t, Identical>_RMS 8 % 8 %
<...>
BM_bcmp<uint16_t, Identical>/256000 161408 ns 161409 ns 4027 bytes_read/iteration=1000k bytes_read/sec=5.90843G/s eltcnt=1030.91M eltcnt/sec=1.58603G/s
BM_bcmp<uint16_t, Identical>_BigO 0.67 N 0.67 N
BM_bcmp<uint16_t, Identical>_RMS 25 % 25 %
<...>
BM_bcmp<uint32_t, Identical>/128000 81497 ns 81488 ns 8415 bytes_read/iteration=1000k bytes_read/sec=11.7032G/s eltcnt=1077.12M eltcnt/sec=1.57078G/s
BM_bcmp<uint32_t, Identical>_BigO 0.71 N 0.71 N
BM_bcmp<uint32_t, Identical>_RMS 42 % 42 %
<...>
BM_bcmp<uint64_t, Identical>/64000 50138 ns 50138 ns 10909 bytes_read/iteration=1000k bytes_read/sec=19.0209G/s eltcnt=698.176M eltcnt/sec=1.27647G/s
BM_bcmp<uint64_t, Identical>_BigO 0.84 N 0.84 N
BM_bcmp<uint64_t, Identical>_RMS 27 % 27 %
<...>
BM_bcmp<uint8_t, InequalHalfway>/512000 192405 ns 192392 ns 3638 bytes_read/iteration=1000k bytes_read/sec=4.95694G/s eltcnt=1.86266G eltcnt/sec=2.66124G/s
BM_bcmp<uint8_t, InequalHalfway>_BigO 0.38 N 0.38 N
BM_bcmp<uint8_t, InequalHalfway>_RMS 3 % 3 %
<...>
BM_bcmp<uint16_t, InequalHalfway>/256000 127858 ns 127860 ns 5477 bytes_read/iteration=1000k bytes_read/sec=7.45873G/s eltcnt=1.40211G eltcnt/sec=2.00219G/s
BM_bcmp<uint16_t, InequalHalfway>_BigO 0.50 N 0.50 N
BM_bcmp<uint16_t, InequalHalfway>_RMS 0 % 0 %
<...>
BM_bcmp<uint32_t, InequalHalfway>/128000 49140 ns 49140 ns 14281 bytes_read/iteration=1000k bytes_read/sec=19.4072G/s eltcnt=1.82797G eltcnt/sec=2.60478G/s
BM_bcmp<uint32_t, InequalHalfway>_BigO 0.40 N 0.40 N
BM_bcmp<uint32_t, InequalHalfway>_RMS 18 % 18 %
<...>
BM_bcmp<uint64_t, InequalHalfway>/64000 32101 ns 32099 ns 21786 bytes_read/iteration=1000k bytes_read/sec=29.7101G/s eltcnt=1.3943G eltcnt/sec=1.99381G/s
BM_bcmp<uint64_t, InequalHalfway>_BigO 0.50 N 0.50 N
BM_bcmp<uint64_t, InequalHalfway>_RMS 1 % 1 %
RUNNING: build-new/test/llvm-bcmp-bench --benchmark_out=/tmp/tmpQ46PP0
2019-04-25 21:19:29
Running build-new/test/llvm-bcmp-bench
Run on (8 X 4000 MHz CPU s)
CPU Caches:
L1 Data 16K (x8)
L1 Instruction 64K (x4)
L2 Unified 2048K (x4)
L3 Unified 8192K (x1)
Load Average: 1.01, 2.85, 3.71
---------------------------------------------------------------------------------------------------
Benchmark Time CPU Iterations UserCounters...
---------------------------------------------------------------------------------------------------
<...>
BM_bcmp<uint8_t, Identical>/512000 18593 ns 18590 ns 37565 bytes_read/iteration=1000k bytes_read/sec=51.2991G/s eltcnt=19.2333G eltcnt/sec=27.541G/s
BM_bcmp<uint8_t, Identical>_BigO 0.04 N 0.04 N
BM_bcmp<uint8_t, Identical>_RMS 37 % 37 %
<...>
BM_bcmp<uint16_t, Identical>/256000 18950 ns 18948 ns 37223 bytes_read/iteration=1000k bytes_read/sec=50.3324G/s eltcnt=9.52909G eltcnt/sec=13.511G/s
BM_bcmp<uint16_t, Identical>_BigO 0.08 N 0.08 N
BM_bcmp<uint16_t, Identical>_RMS 34 % 34 %
<...>
BM_bcmp<uint32_t, Identical>/128000 18627 ns 18627 ns 37895 bytes_read/iteration=1000k bytes_read/sec=51.198G/s eltcnt=4.85056G eltcnt/sec=6.87168G/s
BM_bcmp<uint32_t, Identical>_BigO 0.16 N 0.16 N
BM_bcmp<uint32_t, Identical>_RMS 35 % 35 %
<...>
BM_bcmp<uint64_t, Identical>/64000 18855 ns 18855 ns 37458 bytes_read/iteration=1000k bytes_read/sec=50.5791G/s eltcnt=2.39731G eltcnt/sec=3.3943G/s
BM_bcmp<uint64_t, Identical>_BigO 0.32 N 0.32 N
BM_bcmp<uint64_t, Identical>_RMS 33 % 33 %
<...>
BM_bcmp<uint8_t, InequalHalfway>/512000 9570 ns 9569 ns 73500 bytes_read/iteration=1000k bytes_read/sec=99.6601G/s eltcnt=37.632G eltcnt/sec=53.5046G/s
BM_bcmp<uint8_t, InequalHalfway>_BigO 0.02 N 0.02 N
BM_bcmp<uint8_t, InequalHalfway>_RMS 29 % 29 %
<...>
BM_bcmp<uint16_t, InequalHalfway>/256000 9547 ns 9547 ns 74343 bytes_read/iteration=1000k bytes_read/sec=99.8971G/s eltcnt=19.0318G eltcnt/sec=26.8159G/s
BM_bcmp<uint16_t, InequalHalfway>_BigO 0.04 N 0.04 N
BM_bcmp<uint16_t, InequalHalfway>_RMS 29 % 29 %
<...>
BM_bcmp<uint32_t, InequalHalfway>/128000 9396 ns 9394 ns 73521 bytes_read/iteration=1000k bytes_read/sec=101.518G/s eltcnt=9.41069G eltcnt/sec=13.6255G/s
BM_bcmp<uint32_t, InequalHalfway>_BigO 0.08 N 0.08 N
BM_bcmp<uint32_t, InequalHalfway>_RMS 30 % 30 %
<...>
BM_bcmp<uint64_t, InequalHalfway>/64000 9499 ns 9498 ns 73802 bytes_read/iteration=1000k bytes_read/sec=100.405G/s eltcnt=4.72333G eltcnt/sec=6.73808G/s
BM_bcmp<uint64_t, InequalHalfway>_BigO 0.16 N 0.16 N
BM_bcmp<uint64_t, InequalHalfway>_RMS 28 % 28 %
Comparing build-old/test/llvm-bcmp-bench to build-new/test/llvm-bcmp-bench
Benchmark Time CPU Time Old Time New CPU Old CPU New
---------------------------------------------------------------------------------------------------------------------------------------
<...>
BM_bcmp<uint8_t, Identical>/512000 -0.9570 -0.9570 432131 18593 432101 18590
<...>
BM_bcmp<uint16_t, Identical>/256000 -0.8826 -0.8826 161408 18950 161409 18948
<...>
BM_bcmp<uint32_t, Identical>/128000 -0.7714 -0.7714 81497 18627 81488 18627
<...>
BM_bcmp<uint64_t, Identical>/64000 -0.6239 -0.6239 50138 18855 50138 18855
<...>
BM_bcmp<uint8_t, InequalHalfway>/512000 -0.9503 -0.9503 192405 9570 192392 9569
<...>
BM_bcmp<uint16_t, InequalHalfway>/256000 -0.9253 -0.9253 127858 9547 127860 9547
<...>
BM_bcmp<uint32_t, InequalHalfway>/128000 -0.8088 -0.8088 49140 9396 49140 9394
<...>
BM_bcmp<uint64_t, InequalHalfway>/64000 -0.7041 -0.7041 32101 9499 32099 9498
```
What can we tell from the benchmark?
* Performance of naive equality check somewhat improves with element size,
maxing out at eltcnt/sec=1.58603G/s for uint16_t, or bytes_read/sec=19.0209G/s
for uint64_t. I think, that instability implies performance problems.
* Performance of `memcmp()`-aware benchmark always maxes out at around
bytes_read/sec=51.2991G/s for every type. That is 2.6x the throughput of the
naive variant!
* eltcnt/sec metric for the `memcmp()`-aware benchmark maxes out at
eltcnt/sec=27.541G/s for uint8_t (was: eltcnt/sec=1.18491G/s, so 24x) and
linearly decreases with element size.
For uint64_t, it's ~4x+ the elements/second.
* The call obvious is more pricey than the loop, with small element count.
As it can be seen from the full output {F8768210}, the `memcmp()` is almost
universally worse, independent of the element size (and thus buffer size) when
element count is less than 8.
So all in all, bcmp idiom does indeed pose untapped performance headroom.
This diff does implement said idiom recognition. I think a reasonable test
coverage is present, but do tell if there is anything obvious missing.
Now, quality. This does succeed to build and pass the test-suite, at least
without any non-bundled elements. {F8768216} {F8768217}
This transform fires 91 times:
```
$ /build/test-suite/utils/compare.py -m loop-idiom.NumBCmp result-new.json
Tests: 1149
Metric: loop-idiom.NumBCmp
Program result-new
MultiSourc...Benchmarks/7zip/7zip-benchmark 79.00
MultiSource/Applications/d/make_dparser 3.00
SingleSource/UnitTests/vla 2.00
MultiSource/Applications/Burg/burg 1.00
MultiSourc.../Applications/JM/lencod/lencod 1.00
MultiSource/Applications/lemon/lemon 1.00
MultiSource/Benchmarks/Bullet/bullet 1.00
MultiSourc...e/Benchmarks/MallocBench/gs/gs 1.00
MultiSourc...gs-C/TimberWolfMC/timberwolfmc 1.00
MultiSourc...Prolangs-C/simulator/simulator 1.00
```
The size changes are:
I'm not sure what's going on with SingleSource/UnitTests/vla.test yet, did not look.
```
$ /build/test-suite/utils/compare.py -m size..text result-{old,new}.json --filter-hash
Tests: 1149
Same hash: 907 (filtered out)
Remaining: 242
Metric: size..text
Program result-old result-new diff
test-suite...ingleSource/UnitTests/vla.test 753.00 833.00 10.6%
test-suite...marks/7zip/7zip-benchmark.test 1001697.00 966657.00 -3.5%
test-suite...ngs-C/simulator/simulator.test 32369.00 32321.00 -0.1%
test-suite...plications/d/make_dparser.test 89585.00 89505.00 -0.1%
test-suite...ce/Applications/Burg/burg.test 40817.00 40785.00 -0.1%
test-suite.../Applications/lemon/lemon.test 47281.00 47249.00 -0.1%
test-suite...TimberWolfMC/timberwolfmc.test 250065.00 250113.00 0.0%
test-suite...chmarks/MallocBench/gs/gs.test 149889.00 149873.00 -0.0%
test-suite...ications/JM/lencod/lencod.test 769585.00 769569.00 -0.0%
test-suite.../Benchmarks/Bullet/bullet.test 770049.00 770049.00 0.0%
test-suite...HMARK_ANISTROPIC_DIFFUSION/128 NaN NaN nan%
test-suite...HMARK_ANISTROPIC_DIFFUSION/256 NaN NaN nan%
test-suite...CHMARK_ANISTROPIC_DIFFUSION/64 NaN NaN nan%
test-suite...CHMARK_ANISTROPIC_DIFFUSION/32 NaN NaN nan%
test-suite...ENCHMARK_BILATERAL_FILTER/64/4 NaN NaN nan%
Geomean difference nan%
result-old result-new diff
count 1.000000e+01 10.00000 10.000000
mean 3.152090e+05 311695.40000 0.006749
std 3.790398e+05 372091.42232 0.036605
min 7.530000e+02 833.00000 -0.034981
25% 4.243300e+04 42401.00000 -0.000866
50% 1.197370e+05 119689.00000 -0.000392
75% 6.397050e+05 639705.00000 -0.000005
max 1.001697e+06 966657.00000 0.106242
```
I don't have timings though.
And now to the code. The basic idea is to completely replace the whole loop.
If we can't fully kill it, don't transform.
I have left one or two comments in the code, so hopefully it can be understood.
Also, there is a few TODO's that i have left for follow-ups:
* widening of `memcmp()`/`bcmp()`
* step smaller than the comparison size
* Metadata propagation
* more than two blocks as long as there is still a single backedge?
* ???
Reviewers: reames, fhahn, mkazantsev, chandlerc, craig.topper, courbet
Reviewed By: courbet
Subscribers: hiraditya, xbolva00, nikic, jfb, gchatelet, courbet, llvm-commits, mclow.lists
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61144
llvm-svn: 370454
We can also apply the earlier updates to the lazy DTU, instead of
applying them directly.
Reviewers: kuhar, brzycki, asbirlea, SjoerdMeijer
Reviewed By: brzycki, asbirlea, SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D66918
llvm-svn: 370391
Summary:
I'm not planning to check this in at the moment, but feedback is very welcome, in particular how this affects performance.
The feedback obtains here will guide the next steps towards enabling this.
This patch enables the use of MemorySSA in the loop pass manager.
Passes that currently use MemorySSA:
- EarlyCSE
Passes that use MemorySSA after this patch:
- EarlyCSE
- LICM
- SimpleLoopUnswitch
Loop passes that update MemorySSA (and do not use it yet, but could use it after this patch):
- LoopInstSimplify
- LoopSimplifyCFG
- LoopUnswitch
- LoopRotate
- LoopSimplify
- LCSSA
Loop passes that do *not* update MemorySSA:
- IndVarSimplify
- LoopDelete
- LoopIdiom
- LoopSink
- LoopUnroll
- LoopInterchange
- LoopUnrollAndJam
- LoopVectorize
- LoopReroll
- IRCE
Reviewers: chandlerc, george.burgess.iv, davide, sanjoy, gberry
Subscribers: jlebar, Prazek, dmgreen, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58311
llvm-svn: 370384
Summary:
- Similar to the workaround in fix of PR30188, skip sinking common
lifetime markers of `alloca`. They are mostly left there after
inlining functions in branches.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66950
llvm-svn: 370376
Summary:
As it can be seen in the tests in D65143/D65144, even though we have formed an '@llvm.umul.with.overflow'
and got rid of potential for division-by-zero, the control flow remains, we still have that branch.
We have this condition:
```
// Don't fold i1 branches on PHIs which contain binary operators
// These can often be turned into switches and other things.
if (PN->getType()->isIntegerTy(1) &&
(isa<BinaryOperator>(PN->getIncomingValue(0)) ||
isa<BinaryOperator>(PN->getIncomingValue(1)) ||
isa<BinaryOperator>(IfCond)))
return false;
```
which was added back in rL121764 to help with `select` formation i think?
That check prevents us to flatten the CFG here, even though we know
we no longer need that guard and will be able to drop everything
but the '@llvm.umul.with.overflow' + `not`.
As it can be seen from tests, we end here because the `not` is being
sinked into the PHI's incoming values by InstCombine,
so we can't workaround this by hoisting it to after PHI.
Thus i suggest that we relax that check to not bailout if we'd get to hoist the `not`.
Reviewers: craig.topper, spatel, fhahn, nikic
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65147
llvm-svn: 370349
Summary:
Finally, the fold i was looking forward to :)
The legality check is muddy, i doubt i've groked the full generalization,
but it handles all the cases i care about, and can come up with:
https://rise4fun.com/Alive/26j
I.e. we can perform the fold if **any** of the following is true:
* The shift amount is either zero or one less than widest bitwidth
* Either of the values being shifted has at most lowest bit set
* The value that is being shifted by `shl` (which is not truncated) should have no less leading zeros than the total shift amount;
* The value that is being shifted by `lshr` (which **is** truncated) should have no less leading zeros than the widest bit width minus total shift amount minus one
I strongly suspect there is some better generalization, but i'm not aware of it as of right now.
For now i also avoided using actual `computeKnownBits()`, but restricted it to constants.
Reviewers: spatel, nikic, xbolva00
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66383
llvm-svn: 370324
We do not access the DT in the loop, so we do not have to apply updates
eagerly. We can apply them lazyly and flush them after we are done
merging blocks.
As follow-up work, we might be able to use the DTU above as well,
instead of manually updating the DT.
This brings the example from PR43134 from ~100s to ~4s for a relase +
assertions build on my machine.
Reviewers: efriedma, kuhar, asbirlea, brzycki
Reviewed By: kuhar, brzycki
Differential Revision: https://reviews.llvm.org/D66911
llvm-svn: 370292
...cloning a function from a different module
Currently when a function with debug info is cloned from a different module, the
cloned function may have hanging DICompileUnits, so that the module with the
cloned function fails debug info verification.
The proposed fix inserts all DICompileUnits reachable from the cloned function
to "llvm.dbg.cu" metadata operands of the cloned function module.
Reviewed By: aprantl, efriedma
Differential Revision: https://reviews.llvm.org/D66510
Patch by Oleg Pliss (Oleg.Pliss@azul.com)
llvm-svn: 370265
By default ASan calls a versioned function
`__asan_version_mismatch_check_vXXX` from the ASan module constructor to
check that the compiler ABI version and runtime ABI version are
compatible. This ensures that we get a predictable linker error instead
of hard-to-debug runtime errors.
Sometimes, however, we want to skip this safety guard. This new command
line option allows us to do just that.
rdar://47891956
Reviewed By: kubamracek
Differential Revision: https://reviews.llvm.org/D66826
llvm-svn: 370258
Always true/false checks were flagged by static analysis;
https://bugs.llvm.org/show_bug.cgi?id=43143
I have not confirmed the logic difference in propagating nsw vs. nuw,
but presumably we would have noticed a bug by now if that was wrong.
llvm-svn: 370248
Summary:
This functionality was added when Mapper::mapMetadata was recursive. It
is no longer needed after r265456, which switched it to be iterative.
Reviewers: dexonsmith, srhines
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66860
llvm-svn: 370236
As dependences between abstract attributes can become stale, e.g., if
one was sufficient to imply another one at some point but it has since
been wakened to the point it is not usable for the formerly implied one.
To weed out spurious dependences, and thereby eliminate unneeded
updates, we introduce an option to determine how often the dependence
cache is cleared and recomputed during the fixpoint iteration.
Note that the initial value was determined such that we see a positive
result on our tests.
Differential Revision: https://reviews.llvm.org/D63315
llvm-svn: 370230
Summary:
Until we have proper call-site information we should not recompute
liveness and return information for each call site. This patch directly
uses the function versions and introduces TODOs at the usage sites.
The required iterations to get to the fixpoint are most of the time
reduced by this change and we always avoid work duplication.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66562
llvm-svn: 370208
Allow vectorizing loops that have reductions when tail is folded by masking.
A select is introduced in VPlan, choosing between the last value carried by the
loop-exit/live-out instruction of the reduction, and the penultimate value
carried by the reduction phi, according to the "i < n" mask of fold-tail.
This select replaces the last value as the live-out value of the loop.
Differential Revision: https://reviews.llvm.org/D66720
llvm-svn: 370173
The code we had isSafeToLoadUnconditionally was blatantly wrong. This function takes a "Size" argument which is supposed to describe the span loaded from. Instead, the code use the size of the pointer passed (which may be unrelated!) and only checks that span. For any Size > LoadSize, this can and does lead to miscompiles.
Worse, the generic code just a few lines above correctly handles the cases which *are* valid. So, let's delete said code.
Removing this code revealed two issues:
1) As noted by jdoerfert the removed code incorrectly handled external globals. The test update in SROA is to stop testing incorrect behavior.
2) SROA was confusing bytes and bits, but this wasn't obvious as the Size parameter was being essentially ignored anyway. Fixed.
Differential Revision: https://reviews.llvm.org/D66778
llvm-svn: 370102
Summary:
During the fixpoint iteration, including the manifest stage, we should
not delete stuff as other abstract attributes might have a reference to
the value. Through the API this can now be done safely at the very end.
Reviewers: uenoku, sstefan1
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66779
llvm-svn: 370014
Try harder to emulate "old runtime" in the test.
To get the old behavior with the new runtime library, we need both
disable personality function wrapping and enable landing pad
instrumentation.
llvm-svn: 369977
Summary:
Try to verify how many iterations we need for a fixpoint in our tests.
This patch adjust the way we count to make it easier to follow. It also
adjusts the bounds to actually account for a fixpoint and not only the
minimum number to pass all checks.
Reviewers: uenoku, sstefan1
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66757
llvm-svn: 369945
By default, the Attributor tracks potential dependences between abstract
attributes based on the issued Attributor::getAAFor queries. This
simplifies the development of new abstract attributes but it can also
lead to spurious dependences that might increase compile time and make
internalization harder (D63312). With this patch, abstract attributes
can opt-out of implicit dependence tracking and instead register
dependences explicitly. It is up to the implementation to make sure all
existing dependences are registered.
Differential Revision: https://reviews.llvm.org/D63314
llvm-svn: 369935
Summary:
When reconstructing the CFG of the loop after unrolling,
LoopUnroll could in some cases remove the phi operands of
loop-carried values instead of preserving them, resulting
in undef phi values after loop unrolling.
When doing this reconstruction, avoid removing incoming
phi values for phis in the successor blocks if the successor
is the block we are jumping to anyway.
Patch-by: ebevhan
Reviewers: fhahn, efriedma
Reviewed By: fhahn
Subscribers: bjope, lebedev.ri, zzheng, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66334
llvm-svn: 369886
Promoting it from InstCombine's tryToReuseConstantFromSelectInComparison().
Return true if this constant and a constant 'Y' are element-wise equal.
This is identical to just comparing the pointers, with the exception that
for vectors, if only one of the constants has an `undef` element in some
lane, the constants still match.
llvm-svn: 369842
Summary:
`matchThreeWayIntCompare()` looks for
```
select i1 (a == b),
i32 Equal,
i32 (select i1 (a < b), i32 Less, i32 Greater)
```
but both of these selects/compares can be in it's commuted form,
so out of 8 variants, only the two most basic ones is handled.
This fixes regression being introduced in D66232.
Reviewers: spatel, nikic, efriedma, xbolva00
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66607
llvm-svn: 369841
Summary:
If we have e.g.:
```
%t = icmp ult i32 %x, 65536
%r = select i1 %t, i32 %y, i32 65535
```
the constants `65535` and `65536` are suspiciously close.
We could perform a transformation to deduplicate them:
```
Name: ult
%t = icmp ult i32 %x, 65536
%r = select i1 %t, i32 %y, i32 65535
=>
%t.inv = icmp ugt i32 %x, 65535
%r = select i1 %t.inv, i32 65535, i32 %y
```
https://rise4fun.com/Alive/avb
While this may seem esoteric, this should certainly be good for vectors
(less constant pool usage) and for opt-for-size - need to have only one constant.
But the real fun part here is that it allows further transformation,
in particular it finishes cleaning up the `clamp` folding,
see e.g. `canonicalize-clamp-with-select-of-constant-threshold-pattern.ll`.
We start with e.g.
```
%dont_need_to_clamp_positive = icmp sle i32 %X, 32767
%dont_need_to_clamp_negative = icmp sge i32 %X, -32768
%clamp_limit = select i1 %dont_need_to_clamp_positive, i32 -32768, i32 32767
%dont_need_to_clamp = and i1 %dont_need_to_clamp_positive, %dont_need_to_clamp_negative
%R = select i1 %dont_need_to_clamp, i32 %X, i32 %clamp_limit
```
without this patch we currently produce
```
%1 = icmp slt i32 %X, 32768
%2 = icmp sgt i32 %X, -32768
%3 = select i1 %2, i32 %X, i32 -32768
%R = select i1 %1, i32 %3, i32 32767
```
which isn't really a `clamp` - both comparisons are performed on the original value,
this patch changes it into
```
%1.inv = icmp sgt i32 %X, 32767
%2 = icmp sgt i32 %X, -32768
%3 = select i1 %2, i32 %X, i32 -32768
%R = select i1 %1.inv, i32 32767, i32 %3
```
and then the magic happens! Some further transform finishes polishing it and we finally get:
```
%t1 = icmp sgt i32 %X, -32768
%t2 = select i1 %t1, i32 %X, i32 -32768
%t3 = icmp slt i32 %t2, 32767
%R = select i1 %t3, i32 %t2, i32 32767
```
which is beautiful and just what we want.
Proofs for `getFlippedStrictnessPredicateAndConstant()` for de-canonicalization:
https://rise4fun.com/Alive/THl
Proofs for the fold itself: https://rise4fun.com/Alive/THl
Reviewers: spatel, dmgreen, nikic, xbolva00
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66232
llvm-svn: 369840
Summary:
We can now manifest alignment information in load/store instructions if
the pointer is known to have a better alignment.
Reviewers: uenoku, sstefan1, lebedev.ri
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66567
llvm-svn: 369804
Started implementing the vector case and realized the scalar case hadn't handled the GEP producing a different type than the base correctly. It's entertaining seeing what slips through review when we're focused on the 'hard' parts. :(
Also adding an extra vector test as it happened to be in workspace and wasn't worth separating.
llvm-svn: 369795
This generalizes the isGEPKnownNonNull rule from ValueTracking to apply when we do not know if the base is non-null, and thus need to replace one condition with another.
The core notion is that since an inbounds GEP can only form null if the base pointer is null and the offset is zero. However, if the offset is non-zero, the the "inbounds" marker makes the result poison. Thus, we're free to ignore the case where the offset is non-zero. Similarly, there's no case under which a non-null base can result in a null result without generating poison.
Differential Revision: https://reviews.llvm.org/D66608
llvm-svn: 369789
Summary:
If the unique return value is a constant we now replace call uses with
that constant.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66551
llvm-svn: 369785
Summary:
If we have a loop in which the dereferenceability of a pointer decreases
we did slowly decrease it iteration by iteration, leading to a timeout.
With this patch we detect such circular reasoning and indicate a
fixpoint early.
Reviewers: uenoku, sstefan1
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66558
llvm-svn: 369784
Summary:
If we have a negative inbounds offset dereferenceabily "grows". However,
until we do not handle the overflow that can occur in the
dereferenceable bytes and the problem with loops, we simply do not grow
the state.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66557
llvm-svn: 369771
If the number of potentially returned values not change since the last
traversal we do not need to visit the returned values again. This works
as we only add values to the returned values set now.
Differential Revision: https://reviews.llvm.org/D66484
llvm-svn: 369770
Summary:
When we have new attributes and we end the fixpoint iteration because
the iteration limit is reached, we need to treat the new ones as if they
changed in the last iteration, as they might have.
This adds a test for which we should not derive anything regardless of
the iteration limit, e.g., if we abort there should not be any
attributes manifested in the IR.
Reviewers: uenoku, sstefan1
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66549
llvm-svn: 369768
Summary:
Keep aliasees alive if their alias is live, otherwise we end up with an
alias to a declaration, which is invalid. This can happen when the
aliasee is weak and non-prevailing.
This fix exposed the fact that we were then attempting to internalize
the weak symbol, which was not exported as it was not prevailing. We
should not internalize interposable symbols in general, unless this is
the prevailing copy, since it can lead to incorrect inlining and other
optimizations. Most of the changes in this patch are due to the
restructuring required to pass down the prevailing callback.
Finally, while implementing the test cases, I found that in the case of
a weak aliasee that is still marked not live because its alias isn't
live, after dropping the definition we incorrectly marked the
declaration with weak linkage when resolving prevailing symbols in the
module. This was due to some special case handling for symbols marked
WeakLinkage in the summary located before instead of after a subsequent
check for the symbol being a declaration. It turns out that we don't
actually need this special case handling any more (looking back at the
history, when that was added the code was structured quite differently)
- we will correctly mark with weak linkage further below when the
definition hasn't been dropped.
Fixes PR42542.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, steven_wu, dexonsmith, dang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66264
llvm-svn: 369766
We were computing the loop exit value, but not ensuring the addrec belonged to the loop whose exit value we were computing. I couldn't actually trip this; the test case shows the basic setup which *might* trip this, but none of the variations I've tried actually do.
llvm-svn: 369730
The alignment is calculated incorrectly, thus sometimes it doesn't generate aligned mov instructions, as shown by the example below:
```
// b.cc
typedef long long index;
extern "C" index g_tid;
extern "C" index g_num;
void add3(float* __restrict__ a, float* __restrict__ b, float* __restrict__ c) {
index n = 64*1024;
index m = 16*1024;
index k = 4*1024;
index tid = g_tid;
index num = g_num;
__builtin_assume_aligned(a, 32);
__builtin_assume_aligned(b, 32);
__builtin_assume_aligned(c, 32);
for (index i0=tid*k; i0<m; i0+=num*k)
for (index i1=0; i1<n*m; i1+=m)
for (index i2=0; i2<k; i2++)
c[i1+i0+i2] = b[i0+i2] + a[i1+i0+i2];
}
```
Compile with `clang b.cc -Ofast -march=skylake -mavx2 -S`
```
vmovaps -224(%rdi,%rbx,4), %ymm0
vmovups -192(%rdi,%rbx,4), %ymm1 # should be movaps
vmovups -160(%rdi,%rbx,4), %ymm2 # should be movaps
vmovups -128(%rdi,%rbx,4), %ymm3 # should be movaps
vaddps -224(%rsi,%rbx,4), %ymm0, %ymm0
vaddps -192(%rsi,%rbx,4), %ymm1, %ymm1
vaddps -160(%rsi,%rbx,4), %ymm2, %ymm2
vaddps -128(%rsi,%rbx,4), %ymm3, %ymm3
vmovaps %ymm0, -224(%rdx,%rbx,4)
vmovups %ymm1, -192(%rdx,%rbx,4) # should be movaps
vmovups %ymm2, -160(%rdx,%rbx,4) # should be movaps
vmovups %ymm3, -128(%rdx,%rbx,4) # should be movaps
```
Differential Revision: https://reviews.llvm.org/D66575
Patch by Dun Liang
llvm-svn: 369723
One problem with untagging memory in landing pads is that it only works
correctly if the function that catches the exception is instrumented.
If the function is uninstrumented, we have no opportunity to untag the
memory.
To address this, replace landing pad instrumentation with personality function
wrapping. Each function with an instrumented stack has its personality function
replaced with a wrapper provided by the runtime. Functions that did not have
a personality function to begin with also get wrappers if they may be unwound
past. As the unwinder calls personality functions during stack unwinding,
the original personality function is called and the function's stack frame is
untagged by the wrapper if the personality function instructs the unwinder
to keep unwinding. If unwinding stops at a landing pad, the function is
still responsible for untagging its stack frame if it resumes unwinding.
The old landing pad mechanism is preserved for compatibility with old runtimes.
Differential Revision: https://reviews.llvm.org/D66377
llvm-svn: 369721
I noticed another instance of the issue where references to aliases were
being replaced with aliasees, this time in InstCombine. In the instance that
I saw it turned out to be only a QoI issue (a symbol ended up being missing
from the symbol table due to the last reference to the alias being removed,
preventing HWASAN from symbolizing a global reference), but it could easily
have manifested as incorrect behaviour.
Since this is the third such issue encountered (previously: D65118, D65314)
it seems to be time to address this common error/QoI issue once and for all
and make the strip* family of functions not look through aliases.
Includes a test for the specific issue that I saw, but no doubt there are
other similar bugs fixed here.
As with D65118 this has been tested to make sure that the optimization isn't
load bearing. I built Clang, Chromium for Linux, Android and Windows as well
as the test-suite and there were no size regressions.
Differential Revision: https://reviews.llvm.org/D66606
llvm-svn: 369697
Summary: In D65402, I want to get DerefState from AADereferenceable but it was not allowed. This patch moves DerefState definition into Attributor.h and makes AADerefenceable inherit StateWrapper.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66585
llvm-svn: 369653
Currently we do not properly translate addresses with PHIs if LoadBB !=
LI->getParent(), because PHITranslateAddr expects a direct predecessor as argument,
because it considers all instructions outside of the current block to
not requiring translation.
The amount of cases that trigger this should be very low, as most single
predecessor blocks should be folded into their predecessor by GVN before
we actually start with value numbering. It is still not guaranteed to
happen, so we should do PHI translation along all edges between the
loads' block and the predecessor where we have to place a load.
There are a few test cases showing current limits of the PHI translation, which
could be improved later.
Reviewers: spatel, reames, efriedma, john.brawn
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65020
llvm-svn: 369570
An intermediate extend is used to widen the narrow operand to the width of
the other (wider) operand. At that point, we have the same logic as the
existing transform that was restricted to folds of equal width zext/sext.
This mostly solves PR42700:
https://bugs.llvm.org/show_bug.cgi?id=42700
llvm-svn: 369519
For an internal function, if all its call sites are dead, the body of the function is considered dead.
Reviewers: jdoerfert, uenoku
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D66155
llvm-svn: 369470
Summary:
StringMap is used for storing call target to frequency map for AutoFDO. However the iterating order of StringMap is non-deterministic, which leads to non-determinism in AutoFDO profile output. Now new API getSortedCallTargets and SortCallTargets are added for deterministic ordering and output.
Roundtrip test for text profile and binary profile is added.
Reviewers: wmi, davidxl, danielcdh
Subscribers: hiraditya, mgrang, llvm-commits, twoh
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66191
llvm-svn: 369440
1. Update function name and stale code comments.
2. Use variable names that are less ambiguous.
3. Move operand checks into the function as early exits.
llvm-svn: 369390
Summary:
When the line format is wrong, we may end up accessing out of bound
memory. eg: the test with invalide line will cause assert.
Assertion `idx < size()' failed
The fix is to report fatal when we found mismatched line format.
Reviewers: qcolombet, volkan
Reviewed By: qcolombet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66444
llvm-svn: 369389
Before, we create the set of abstract attributes initially and then
dealt with the fact hat a lookup could fail, e.g., return a nullptr.
This patch will ensure we always return a valid object from a lookup,
allowing us not only to remove the nullptr checks but also to grow the
set of abstract attributes "in-flight" on-demand.
One can now start from those that have the best chance of improving
performance without the need to specify all they might depend on.
While this introduces some boilerplate, the usage of attributes is much
easier and cleaner now.
Reviewers: uenoku, sstefan1
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66276
llvm-svn: 369331
Summary:
This is analogous to D66128 but for AADereferenceable. We have the logic
concentrated in the floating value updateImpl and we use the combiner
helper classes for arguments and return values.
The regressions will go away with "on-demand" attribute creation.
Improvements are already visible in the existing tests.
Reviewers: uenoku, sstefan1
Subscribers: hiraditya, bollu, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66272
llvm-svn: 369329
Summary:
What D66126 did for AAAlign, this patch does for AANonNull. Agian, the
logic becomes more concise and localized. Again, returned poiners are
not annotated properly but that will not be an issue if this lands with
the "on-demand" generation of attributes. First improvements due to the
genericValueTraversal are already visible.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66128
llvm-svn: 369328
The clamp operator should not take the known of the given state as the
known is potentially based on assumed information. This also adds TODOs
to guide improvements.
llvm-svn: 369327
We can avoid repetitive calls getSameOpcode() for already known tree elements by keeping MainOp and AltOp in TreeEntry.
Differential Revision: https://reviews.llvm.org/D64700
llvm-svn: 369315
Summary:
Simplify the API using Optional<> and address comments in
https://reviews.llvm.org/D66165
Reviewers: vitalybuka
Subscribers: hiraditya, llvm-commits, ostannard, pcc
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66317
llvm-svn: 369300
This reverts commit cedd0d9a6e.
Re-apply the original commit but make sure the variables are initialized
(even if they are not used) so UBSan is not complaining.
llvm-svn: 369294
Summary:
When inserting uses from outside the MemorySSA creation, we don't
normally need to rename uses, based on the assumption that there will be
no inserted Phis (if Def existed that required a Phi, that Phi already
exists). However, when dealing with unreachable blocks, MemorySSA will
optimize away Phis whose incoming blocks are unreachable, and these Phis end
up being re-added when inserting a Use.
There are two potential solutions here:
1. Analyze the inserted Phis and clean them up if they are unneeded
(current method for cleaning up trivial phis does not cover this)
2. Leave the Phi in place and rename uses, the same way as whe inserting
defs.
This patch use approach 2.
Resolves first test in PR42940.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66033
llvm-svn: 369291
This patch applies only to the new pass manager.
Currently, when MSSA Analysis is available, and pass to each loop pass, it will be preserved by that loop pass.
Hence, mark the analysis preserved based on that condition, vs the current `EnableMSSALoopDependency`. This leaves the global flag to affect only the entry point in the loop pass manager (in FunctionToLoopPassAdaptor).
llvm-svn: 369181
This reverts commit 5dbb90bfe1.
As noted in the post-commit thread for r367891, this can create
a multiply that is lowered to a libcall that may not exist.
We need to improve the backend decomposition for integer multiply
before trying to re-land this (if it's still worthwhile after
doing the backend work).
llvm-svn: 369174
By partially resolving returned calls we did not record that they were
not fully resolved which caused odd behavior down the line. We could
also end up with some, but not all, returned values of the callee in the
returned values map of the caller, another odd behavior we want to
avoid.
llvm-svn: 369160
As a preparation to "on-demand" abstract attribute generation we need
implementations for all attributes (as they can be queried and then
created on-demand where we now fail to find one).
Reviewers: uenoku, sstefan1
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66129
llvm-svn: 369155
Push LR register before calling __gnu_mcount_nc as it expects the value of LR register to be the top value of
the stack on ARM32.
Differential Revision: https://reviews.llvm.org/D65019
llvm-svn: 369147
Summary:
This is the first commit aiming to structure the attribute deduction.
The base idea is that we have default propagation patterns as listed
below on top of which we can add specific, e.g., context sensitive,
logic.
Deduction patterns used in this patch:
- argument states are determined from call site argument states,
see AAAlignArgument and AAArgumentFromCallSiteArguments.
- call site argument states are determined as if they were floating
values, see AAAlignCallSiteArgument and AAAlignFloating.
- floating value states are determined by traversing the def-use chain
and combining the states determined for the leaves, see
AAAlignFloating and genericValueTraversal.
- call site return states are determined from function return states,
see AAAlignCallSiteReturned and AACallSiteReturnedFromReturned.
- function return states are determined from returned value states,
see AAAlignReturned and AAReturnedFromReturnedValues.
Through this strategy all logic for alignment is concentrated in the
AAAlignFloating::updateImpl method.
Note: This commit works on its own but is part of a larger change that
involves "on-demand" creation of abstract attributes that will
participate in the fixpoint iteration. Without this part, we sometimes
do not have an AAAlign abstract attribute to query, loosing information
we determined before. All tests have appropriate FIXMEs and the
information will be recovered once we added all parts.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66126
llvm-svn: 369144
Until we have call site specific liveness and/or value information there
is no need to do call site specific deduction. Though, we need the
symbols in follow up patches that make Attributor::getAAFor return a
reference.
llvm-svn: 369143
Summary:
This patch should not change the behavior except that the added
initialize methods might indicate an optimistic fixpoint earlier. The
code movement is done to keep the attribute definitions in a single
block where it makes sense. No functional changes intended there.
Reviewers: uenoku, sstefan1
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66258
llvm-svn: 369142
This pattern may arise more frequently with an enhancement to SLP vectorization suggested in PR42755:
https://bugs.llvm.org/show_bug.cgi?id=42755
...but we should handle this pattern to make things easier for the backend either way.
For all in-tree targets that I looked at, codegen for typical vector sizes looks better when we change
to a vector select, so this is safe to do without a cost model (in other words, as a target-independent
canonicalization).
For example, if the condition of the select is a scalar, we end up with something like this on x86:
vpcmpgtd %xmm0, %xmm1, %xmm0
vpextrb $12, %xmm0, %eax
testb $1, %al
jne LBB0_2
## %bb.1:
vmovaps %xmm3, %xmm2
LBB0_2:
vmovaps %xmm2, %xmm0
Rather than the splat-condition variant:
vpcmpgtd %xmm0, %xmm1, %xmm0
vpshufd $255, %xmm0, %xmm0 ## xmm0 = xmm0[3,3,3,3]
vblendvps %xmm0, %xmm2, %xmm3, %xmm0
Differential Revision: https://reviews.llvm.org/D66095
llvm-svn: 369140
Summary:
The scheduler's dependence graph gets the use-def dependencies by accessing the operands of the instructions in a bundle. However, buildTree_rec() may change the order of the operands in TreeEntry, and the scheduler is currently not aware of this. This is not causing any functional issues currently, because reordering is restricted to the operands of a single instruction. Once we support operand reordering across multiple TreeEntries, as shown here: http://www.llvm.org/devmtg/2019-04/slides/Poster-Porpodas-Supernode_SLP.pdf , the scheduler will need to get the correct operands from TreeEntry and not from the individual instructions.
In short, this patch:
- Connects the scheduler's bundle with the corresponding TreeEntry. It introduces new TE and Lane fields in ScheduleData.
- Moves the location where the operands of the TreeEntry are initialized. This used to take place in newTreeEntry() setting one operand at a time, but is now moved pre-order just before the recursion of buildTree_rec(). This is required because the scheduler needs to access both operands of the TreeEntry in tryScheduleBundle().
- Updates the scheduler to access the instruction operands through the TreeEntry operands instead of accessing the instruction operands directly.
Reviewers: ABataev, RKSimon, dtemirbulatov, Ayal, dorit, hfinkel
Reviewed By: ABataev
Subscribers: hiraditya, llvm-commits, lebedev.ri, rcorcs
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62432
llvm-svn: 369131
Summary:
This is continuation of D63829 / https://bugs.llvm.org/show_bug.cgi?id=42399
I thought naive pattern would solve my issue, but nope, it involved truncation,
thus more folds needed.. This isn't really the fold i'm interested in,
i need trunc-of-lshr, but i'we decided to start with `shl` because it's simpler.
In this case, no extra legality checks are needed:
https://rise4fun.com/Alive/CAb
We should be careful about not increasing instruction count,
since we need to produce `zext` because `and` is done in wider type.
Reviewers: spatel, nikic, xbolva00
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66057
llvm-svn: 369117
cppcheck + MSVC analyzer both over zealously warn that we might dereference a null Bundle pointer - add an assertion to check for null to silence the warning, plus its a good idea to check that we succeeded in finding a schedule bundle anyway....
llvm-svn: 369094
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
assume_safety implies that loads under "if's" can be safely executed
speculatively (unguarded, unmasked). However this assumption holds only for the
original user "if's", not those introduced by the compiler, such as the
fold-tail "if" that guards us from loading beyond the original loop trip-count.
Currently the combination of fold-tail and assume-safety pragmas results in
ignoring the fold-tail predicate that guards the loads, generating unmasked
loads. This patch fixes this behavior.
Differential Revision: https://reviews.llvm.org/D66106
Reviewers: Ayal, hsaito, fhahn
llvm-svn: 368973
Summary:
Fixes https://bugs.llvm.org/show_bug.cgi?id=36578 and https://bugs.llvm.org/show_bug.cgi?id=36296.
Supersedes: https://reviews.llvm.org/D55966
One of the fundamental transformation that CoroSplit pass performs before splitting the coroutine is to find which values need to survive between suspend and resume and provide a slot for them in the coroutine frame to spill and restore the value as needed.
Coroutine frame becomes available once the storage for it was allocated and that point is marked in the pre-split coroutine with a llvm.coro.begin intrinsic.
FE normally puts all of the user-authored code that would be accessing those values after llvm.coro.begin, however, sometimes instructions accessing those values would end up prior to coro.begin. For example, writing out a value of the parameter into the alloca done by the FE or instructions that are added by the optimization passes such as SROA when it rewrites allocas.
Prior to this change, CoroSplit pass would try to move instructions that may end up accessing the values in the coroutine frame after CoroBegin. However it would run into problems (report_fatal_error) if some of the values would be used both in the allocation function (for example allocator is passed as a parameter to a coroutine) and in the use-authored body of the coroutine.
To handle this case and to simplify the instruction moving logic, this change removes all of the instruction moving. Instead, we only change the uses of the spilled values that are dominated by coro.begin and leave other instructions intact.
Before:
```
%var = alloca i32
%1 = getelementptr .. %var; ; will move this one after coro.begin
%f = call i8* @llvm.coro.begin(
```
After:
```
%var = alloca i32
%1 = getelementptr .. %var; stays put
%f = call i8* @llvm.coro.begin(
```
If we discover that there is a potential write into an alloca, prior to coro.begin we would copy its value from the alloca into the spill slot in the coroutine frame.
Before:
```
%var = alloca i32
store .. %var ; will move this one after coro.begin
%f = call i8* @llvm.coro.begin(
```
After:
```
%var = alloca i32
store .. %var ;stays put
%f = call i8* @llvm.coro.begin(
%tmp = load %var
store %tmp, %spill.slot.for.var
```
Note: This change does not handle array allocas as that is something that C++ FE does not produce, but, it can be added in the future if need arises
Reviewers: llvm-commits, modocache, ben-clayton, tks2103, rjmccall
Reviewed By: modocache
Subscribers: bartdesmet
Differential Revision: https://reviews.llvm.org/D66230
llvm-svn: 368949
Summary:
Instead of constantly keeping track of the nonnull status with the
dereferenceable information we can simply query the nonnull attribute
whenever we need the information (debug + manifest).
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66113
llvm-svn: 368924
Summary:
As one of the first attributes, and one of the complex ones,
AAReturnedValues was not using liveness but we filtered the result after
the fact. This change adds liveness usage during the creation. The
algorithm is also improved and shorter.
The new algorithm will collect returned values over time using the
generic facilities that work with liveness already, e.g.,
genericValueTraversal which does not look at dead PHI node predecessors.
A test to show how this leads to better results is included.
Note: Unresolved calls and resolved calls are now tracked explicitly.
Reviewers: uenoku, sstefan1
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66120
llvm-svn: 368922
Summary:
If the associated context instruction is assumed dead we do not need to
update or manifest the state.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66116
llvm-svn: 368921
Summary:
The next attempt to clean up the Attributor interface before we grow it
further.
Before, we used a combination of two values (associated + anchor) and an
argument number (or -1) to determine a location. This was very fragile.
The new system uses exclusively IR positions and we restrict the
generation of IR positions to special constructor methods that verify
internal constraints we have. This will catch misuse early.
The auto-conversion, e.g., in getAAFor, is now performed through the
SubsumingPositionIterator. This iterator takes an IR position and allows
to visit all IR positions that "subsume" the given one, e.g., function
attributes "subsume" argument attributes of that function. For a
detailed breakdown see the class comment of SubsumingPositionIterator.
This patch also introduces the IRPosition::getAttrs() to extract IR
attributes at a certain position. The method knows how to look up in
different positions that are equivalent, e.g., the argument position for
call site arguments. We also introduce three new positions kinds such
that we have all IR positions where attributes can be placed and one for
"floating" values.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65977
llvm-svn: 368919
We already supported rewriting loop exit values for multiple exit loops, but if any of the loop exits were not computable, we gave up on all loop exit values. This patch generalizes the existing code to handle individual computable loop exits where possible.
As discussed in the review, this is a starting point for figuring out a better API. The code is a bit ugly, but getting it in lets us test as we go.
Differential Revision: https://reviews.llvm.org/D65544
llvm-svn: 368898
I'm planning on handling intrinsics that will benefit from checking
the address space enums. Don't bother moving the address collection
for now, since those won't need th enums.
llvm-svn: 368895
Summary:
We can't speculate around indirect branches: indirectbr and invoke. The
callbr instruction needs to be included here.
Reviewers: nickdesaulniers, manojgupta, chandlerc
Reviewed By: chandlerc
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66200
llvm-svn: 368873
This is the compiler-flag equivalent of the Predicate pragma
(https://reviews.llvm.org/D65197), to direct the vectorizer to fold the
remainder-loop into the main-loop using predication.
Differential Revision: https://reviews.llvm.org/D66108
Reviewers: Ayal, hsaito, fhahn, SjoerdMeije
llvm-svn: 368801
The support for swifterror allocas should work in all lowerings.
The support for swifterror arguments only really works in a lowering
with prototypes where you can ensure that the prototype also has a
swifterror argument; I'm not really sure how it could possibly be
made to work in the switch lowering.
llvm-svn: 368795
A quick contrast of this ABI with the currently-implemented ABI:
- Allocation is implicitly managed by the lowering passes, which is fine
for frontends that are fine with assuming that allocation cannot fail.
This assumption is necessary to implement dynamic allocas anyway.
- The lowering attempts to fit the coroutine frame into an opaque,
statically-sized buffer before falling back on allocation; the same
buffer must be provided to every resume point. A buffer must be at
least pointer-sized.
- The resume and destroy functions have been combined; the continuation
function takes a parameter indicating whether it has succeeded.
- Conversely, every suspend point begins its own continuation function.
- The continuation function pointer is directly returned to the caller
instead of being stored in the frame. The continuation can therefore
directly destroy the frame when exiting the coroutine instead of having
to leave it in a defunct state.
- Other values can be returned directly to the caller instead of going
through a promise allocation. The frontend provides a "prototype"
function declaration from which the type, calling convention, and
attributes of the continuation functions are taken.
- On the caller side, the frontend can generate natural IR that directly
uses the continuation functions as long as it prevents IPO with the
coroutine until lowering has happened. In combination with the point
above, the frontend is almost totally in charge of the ABI of the
coroutine.
- Unique-yield coroutines are given some special treatment.
llvm-svn: 368788
Summary:
Given a pattern like:
```
%old_cmp1 = icmp slt i32 %x, C2
%old_replacement = select i1 %old_cmp1, i32 %target_low, i32 %target_high
%old_x_offseted = add i32 %x, C1
%old_cmp0 = icmp ult i32 %old_x_offseted, C0
%r = select i1 %old_cmp0, i32 %x, i32 %old_replacement
```
it can be rewritten as more canonical pattern:
```
%new_cmp1 = icmp slt i32 %x, -C1
%new_cmp2 = icmp sge i32 %x, C0-C1
%new_clamped_low = select i1 %new_cmp1, i32 %target_low, i32 %x
%r = select i1 %new_cmp2, i32 %target_high, i32 %new_clamped_low
```
Iff `-C1 s<= C2 s<= C0-C1`
Also, `ULT` predicate can also be `UGE`; or `UGT` iff `C0 != -1` (+invert result)
Also, `SLT` predicate can also be `SGE`; or `SGT` iff `C2 != INT_MAX` (+invert result)
If `C1 == 0`, then all 3 instructions must be one-use; else at most either `%old_cmp1` or `%old_x_offseted` can have extra uses.
NOTE: if we could reuse `%old_cmp1` as one of the comparisons we'll have to build, this could be less limiting.
So there are two icmp's, each one with 3 predicate variants, so there are 9 fold variants:
| | ULT | UGE | UGT |
| SLT | https://rise4fun.com/Alive/yIJ | https://rise4fun.com/Alive/5BfN | https://rise4fun.com/Alive/INH |
| SGE | https://rise4fun.com/Alive/hd8 | https://rise4fun.com/Alive/Abk | https://rise4fun.com/Alive/PlzS |
| SGT | https://rise4fun.com/Alive/VYG | https://rise4fun.com/Alive/oMY | https://rise4fun.com/Alive/KrzC |
{F9730206}
This fold was brought up in https://reviews.llvm.org/D65148#1603922 by @dmgreen, and is needed to unblock that patch.
This patch requires D65530.
Reviewers: spatel, nikic, xbolva00, dmgreen
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits, dmgreen
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65765
llvm-svn: 368687
Summary:
This is rather unconventional..
As the comment there says, we don't have much folds for xor-of-icmps,
we try to turn them into an and-of-icmps, for which we have plenty of folds.
But if the ICmp we need to invert is not single-use - we give up.
As discussed in https://reviews.llvm.org/D65148#1603922,
we may have a non-canonical CLAMP pattern, with bit match and
select-of-threshold that we'll potentially clamp.
As it can be seen in `canonicalize-clamp-with-select-of-constant-threshold-pattern.ll`,
out of all 8 variations of the pattern, only two are **not** canonicalized into
the variant with and+icmp instead of bit math.
The reason is because the ICmp we need to invert is not single-use - we give up.
We indeed can't perform this fold at will, the general rule is that
we should not increase instruction count in InstCombine,
But we wouldn't end up increasing instruction count if we can adapt every other
user to the inverted value. This way the `not` we create **will** get folded,
and in the end the instruction count did not increase.
For that, of course, we need to look at the users of a Value,
which is again rather unconventional for InstCombine :S
Thus i'm proposing to be a little bit more insistive in `foldXorOfICmps()`.
The alternatives would be to not create that `not`, but add duplicate code to
manually invert all users; or to add some even less general combine to handle
some more specific pattern[s].
Reviewers: spatel, nikic, RKSimon, craig.topper
Reviewed By: spatel
Subscribers: hiraditya, jdoerfert, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65530
llvm-svn: 368685
Summary:
This commit fixed a race condition from multi-threaded thinLTO backends that causes non-deterministic memory corruption for a data structure used only by AutoFDO with compact binary profile.
GUIDToFuncNameMap, a static data member of type DenseMap in FunctionSamples is used as a per-module mapping from function name MD5 to name string when input AutoFDO profile is in compact binary format. However with ThinLTO, we can have parallel backends modifying and accessing the class static map concurrently. The fix is to make GUIDToFuncNameMap a member of SampleProfileLoader instead of a file static data.
Reviewers: wmi, davidxl, danielcdh
Subscribers: mehdi_amini, inglorion, hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65848
llvm-svn: 368596
Instead of matching value and then blindly casting to BinaryOperator
just to get the opcode, just match instruction and do no cast.
Fixes https://bugs.llvm.org/show_bug.cgi?id=42962
llvm-svn: 368554
Summary:
Hoisting/sinking instruction out of a loop isn't always beneficial. Hoisting an instruction from a cold block inside a loop body out of the loop could hurt performance. This change makes Loop ICM profile aware - it now checks block frequency to make sure hoisting/sinking anly moves instruction to colder block.
Test Plan:
ninja check
Reviewers: asbirlea, sanjoy, reames, nikic, hfinkel, vsk
Reviewed By: asbirlea
Subscribers: fhahn, vsk, davidxl, xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65060
llvm-svn: 368526
If one of the values being shifted is a constant, since the new shift
amount is known-constant, the new shift will end up being constant-folded
so, we don't need that one-use restriction then.
llvm-svn: 368519
That one-use restriction is not needed for correctness - we have already
ensured that one of the shifts will go away, so we know we won't increase
the instruction count. So there is no need for that restriction.
llvm-svn: 368518
This is an extension of a transform that tries to produce positive floating-point
constants to improve canonicalization (and hopefully lead to more reassociation
and CSE).
The original patches were:
D4904
D5363 (rL221721)
But as the test diffs show, these were limited to basic patterns by walking from
an instruction to its single user rather than recursively moving up the def-use
sequence. No fast-math is required here because we're only rearranging implicit
FP negations in intermediate ops.
A motivating bug is:
https://bugs.llvm.org/show_bug.cgi?id=32939
Differential Revision: https://reviews.llvm.org/D65954
llvm-svn: 368512
The default behavior of Clang's indirect function call checker will replace
the address of each CFI-checked function in the output file's symbol table
with the address of a jump table entry which will pass CFI checks. We refer
to this as making the jump table `canonical`. This property allows code that
was not compiled with ``-fsanitize=cfi-icall`` to take a CFI-valid address
of a function, but it comes with a couple of caveats that are especially
relevant for users of cross-DSO CFI:
- There is a performance and code size overhead associated with each
exported function, because each such function must have an associated
jump table entry, which must be emitted even in the common case where the
function is never address-taken anywhere in the program, and must be used
even for direct calls between DSOs, in addition to the PLT overhead.
- There is no good way to take a CFI-valid address of a function written in
assembly or a language not supported by Clang. The reason is that the code
generator would need to insert a jump table in order to form a CFI-valid
address for assembly functions, but there is no way in general for the
code generator to determine the language of the function. This may be
possible with LTO in the intra-DSO case, but in the cross-DSO case the only
information available is the function declaration. One possible solution
is to add a C wrapper for each assembly function, but these wrappers can
present a significant maintenance burden for heavy users of assembly in
addition to adding runtime overhead.
For these reasons, we provide the option of making the jump table non-canonical
with the flag ``-fno-sanitize-cfi-canonical-jump-tables``. When the jump
table is made non-canonical, symbol table entries point directly to the
function body. Any instances of a function's address being taken in C will
be replaced with a jump table address.
This scheme does have its own caveats, however. It does end up breaking
function address equality more aggressively than the default behavior,
especially in cross-DSO mode which normally preserves function address
equality entirely.
Furthermore, it is occasionally necessary for code not compiled with
``-fsanitize=cfi-icall`` to take a function address that is valid
for CFI. For example, this is necessary when a function's address
is taken by assembly code and then called by CFI-checking C code. The
``__attribute__((cfi_jump_table_canonical))`` attribute may be used to make
the jump table entry of a specific function canonical so that the external
code will end up taking a address for the function that will pass CFI checks.
Fixes PR41972.
Differential Revision: https://reviews.llvm.org/D65629
llvm-svn: 368495
Refactor `LibCallSimplifier::optimizeExp2()` to use the new
`emitBinaryFloatFnCall()` version that fetches the function name from TLI.
llvm-svn: 368457
Summary:
Make sure that we report that changes has been made
by InstSimplify also in situations when only trivially
dead instructions has been removed. If for example a call
is removed the call graph must be updated.
Bug seem to have been introduced by llvm-svn r367173
(commit 02b9e45a7e), since the code in question
was rewritten in that commit.
Reviewers: spatel, chandlerc, foad
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65973
llvm-svn: 368401
GlobalAlias and GlobalIFunc ought to be treated the same by the IR
linker, so we can generalize the code to be in terms of their common
base class GlobalIndirectSymbol.
Differential Revision: https://reviews.llvm.org/D55046
llvm-svn: 368357
For some targets the LICM pass can result in sub-optimal code in some
cases where it would be better not to run the pass, but it isn't
always possible to suppress the transformations heuristically.
Where the front-end has insight into such cases it is beneficial
to attach loop metadata to disable the pass - this change adds the
llvm.licm.disable metadata to enable that.
Differential Revision: https://reviews.llvm.org/D64557
llvm-svn: 368296
Summary:
The ever growing switch required Attribute::AttrKind values but they
might not be available for all abstract attributes we deduce. With the
new method we track statistics at the abstract attribute level. The
provided macros simplify the usage and make the messages uniform.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65732
llvm-svn: 368227
Summary:
The wrapper reduces boilerplate code and also provide a nice way to
determine the state type used by an abstract attributes statically via
AAType::StateType.
This was already discussed as part of the review of D65711.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65786
llvm-svn: 368224
If we know everything is live there is no need to query for liveness.
Indicating a pessimistic fixpoint will cause the state to be "invalid"
which will cause the Attributor to not return the AAIsDead on request,
which will prevent us from querying isAssumedDead().
llvm-svn: 368223
Summary:
So far, whenever one wants to look at returned values, one had to deal
with the AAReturnedValues and potentially with the AAIsDead attribute.
In the same spirit as other checkForAllXXX methods, we add this
functionality now to the Attributor. By adopting the use sites we got
better results when return instructions were dead.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65733
llvm-svn: 368222
If we know the trip count, we should make sure the interleave factor won't cause the vectorized loop to exceed it.
Improves one of the cases from PR42674
Differential Revision: https://reviews.llvm.org/D65896
llvm-svn: 368215
Summary:
In SimplifySelectsFeedingBinaryOp, propagate fast math flags from the
outer op into both arms of the new select, to take advantage of
simplifications that require fast math flags.
Reviewers: mcberg2017, majnemer, spatel, arsenm, xbolva00
Subscribers: wdng, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65658
llvm-svn: 368175
This was initially committed in r368059 but got reverted in r368084
because there was a faulty logic in how the shift amounts type mismatch
was being handled (it simply wasn't).
I've added an explicit bailout before we SimplifyAddInst() - i don't think
it's designed in general to handle differently-typed values, even though
the actual problem only comes from ConstantExpr's.
I have also changed the common type deduction, to not just blindly
look past zext, but try to do that so that in the end types match.
Differential Revision: https://reviews.llvm.org/D65380
llvm-svn: 368141
Globals are instrumented by adding a pointer tag to their symbol values
and emitting metadata into a special section that allows the runtime to tag
their memory when the library is loaded.
Due to order of initialization issues explained in more detail in the comments,
shadow initialization cannot happen during regular global initialization.
Instead, the location of the global section is marked using an ELF note,
and we require libc support for calling a function provided by the HWASAN
runtime when libraries are loaded and unloaded.
Based on ideas discussed with @evgeny777 in D56672.
Differential Revision: https://reviews.llvm.org/D65770
llvm-svn: 368102
Summary:
This change gives Emscripten the ability to use more than one constructor
priorities that runs before ASan. By convention, constructor priorites 0-100
are reserved for use by the system. ASan on Emscripten now uses priority 50,
leaving plenty of room for use by Emscripten before and after ASan.
This change is done in response to:
https://github.com/emscripten-core/emscripten/pull/9076#discussion_r310323723
Reviewers: kripken, tlively, aheejin
Reviewed By: tlively
Subscribers: cfe-commits, dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D65684
llvm-svn: 368101
This reverts r368059 (git commit 0f95710976)
This caused Clang to assert while self-hosting and compiling
SystemZInstrInfo.cpp. Reduction is running.
llvm-svn: 368084
Commit r368064 was necessary after r367953 (D65712) broke the module
build. That happened, apparently, because the template class IRAttribute
defined in the header had a virtual method defined in the corresponding
source file (IRAttribute::manifest). To unbreak the situation this patch
introduces a helper function IRAttributeManifest::manifestAttrs which
is used to implement IRAttribute::manifest in the header. The deifnition
of the helper function is still in the source file.
Patch by jdoerfert (Johannes Doerfert)
Differential Revision: https://reviews.llvm.org/D65821
llvm-svn: 368076
Summary:
Currently `reassociateShiftAmtsOfTwoSameDirectionShifts()` only handles
two shifts one after another. If the shifts are `shl`, we still can
easily perform the fold, with no extra legality checks:
https://rise4fun.com/Alive/OQbM
If we have right-shift however, we won't be able to make it
any simpler than it already is.
After this the only thing missing here is constant-folding: (`NewShAmt >= bitwidth(X)`)
* If it's a logical shift, then constant-fold to `0` (not `undef`)
* If it's a `ashr`, then a splat of original signbit
https://rise4fun.com/Alive/E1Khttps://rise4fun.com/Alive/i0V
Reviewers: spatel, nikic, xbolva00
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65380
llvm-svn: 368059
D62198 introduced an option to relax the checks for
hasOnlyUniformBranches. This commit turns the option on by default, for
better code generation in some cases in AMDGPU.
Differential Revision: https://reviews.llvm.org/D63198
Change-Id: I9cbff002a1e74d3b7eb96b4192dc8129936d537d
llvm-svn: 368042
Simon Pilgrim