There was one definite issue in ARM64 (the off-by-1 check for whether
a shift could be folded in) and one difference that is probably
correct: ARM64 didn't fold nodes with multiple uses into the
arithmetic operations unless optimising for code size.
llvm-svn: 206168
In AArch64 i64 to i32 truncate operation is a subregister access.
This allows more opportunities for LSR optmization to eliminate
variables of different types (i32 and i64).
llvm-svn: 205925
When register allocator's stage is RS_Spill, we choose spill over using the CSR
for the first time, if the spill cost is lower than CSRCost.
When register allocator's stage is < RS_Split, we choose pre-splitting over
using the CSR for the first time, if the cost of splitting is lower than
CSRCost.
CSRCost is set with command-line option "regalloc-csr-first-time-cost". The
default value is 0 to generate the same codes as before this commit.
With a value of 15 (1 << 14 is the entry frequency), I measured performance
gain of 3% on 253.perlbmk and 1.7% on 197.parser, with instrumented PGO,
on an arm device.
rdar://16162005
llvm-svn: 204690
Previously, only regular AArch64 instructions were annotated with SchedRW lists.
This patch does the same for NEON enabling these instructions to be scheduled by
the MIScheduler. Additionally, store operations are now modeled and a few
SchedRW lists were updated for bug fixes (e.g. multiple def operands).
Reviewers: apazos, mcrosier, atrick
Patch by Dave Estes <cestes@codeaurora.org>!
llvm-svn: 204505
.data_region is only used in Darwin, so it shouldn't be generated
for other OS. Currently AArch64 doesn't support darwin yet, so
I removed it from AArch64. When Darwin is supported someday, we can
add it back and associate it with Darwin.
llvm-svn: 204424
The syntax for "cmpxchg" should now look something like:
cmpxchg i32* %addr, i32 42, i32 3 acquire monotonic
where the second ordering argument gives the required semantics in the case
that no exchange takes place. It should be no stronger than the first ordering
constraint and cannot be either "release" or "acq_rel" (since no store will
have taken place).
rdar://problem/15996804
llvm-svn: 203559
The function was making too many assumptions about its input:
1. The NEON_VDUP optimisation was far too aggressive, assuming (I
think) that the input would always be BUILD_VECTOR.
2. We were treating most unknown concats as legal (by returning Op
rather than SDValue()). I think only concats of pairs of vectors are
actually legal.
http://llvm.org/PR19094
llvm-svn: 203450
The old system was fairly convoluted:
* A temporary label was created.
* A single PROLOG_LABEL was created with it.
* A few MCCFIInstructions were created with the same label.
The semantics were that the cfi instructions were mapped to the PROLOG_LABEL
via the temporary label. The output position was that of the PROLOG_LABEL.
The temporary label itself was used only for doing the mapping.
The new CFI_INSTRUCTION has a 1:1 mapping to MCCFIInstructions and points to
one by holding an index into the CFI instructions of this function.
I did consider removing MMI.getFrameInstructions completelly and having
CFI_INSTRUCTION own a MCCFIInstruction, but MCCFIInstructions have non
trivial constructors and destructors and are somewhat big, so the this setup
is probably better.
The net result is that we don't create temporary labels that are never used.
llvm-svn: 203204
for the Cortex-A53 subtarget in the AArch64 backend.
This patch lays the ground work to annotate each AArch64 instruction
(no NEON yet) with a list of SchedReadWrite types. The patch also
provides the Cortex-A53 processor resources, maps those the the default
SchedReadWrites, and provides basic latency. NEON support will be added
in a subsequent patch with proper forwarding logic.
Verification was done by setting the pre-RA scheduler to linearize to
better gauge the effect of the MIScheduler. Even without modeling the
forward logic, the results show a modest improvement for Cortex-A53.
Reviewers: apazos, mcrosier, atrick
Patch by Dave Estes <cestes@codeaurora.org>!
llvm-svn: 203125
for the Cortex-A53 subtarget in the AArch64 backend.
This patch lays the ground work to annotate each AArch64 instruction
(no NEON yet) with a list of SchedReadWrite types. The patch also
provides the Cortex-A53 processor resources, maps those the the default
SchedReadWrites, and provides basic latency. NEON support will be added
in a subsequent patch with proper forwarding logic.
Verification was done by setting the pre-RA scheduler to linearize to
better gauge the effect of the MIScheduler. Even without modeling the
forward logic, the results show a modest improvement for Cortex-A53.
Reviewers: apazos, mcrosier, atrick
Patch by Dave Estes <cestes@codeaurora.org>!
llvm-svn: 202767
The table argument is always 128-bit (and interpreted as <16 x i8>) so the
extra specifier for it is just clutter.
No user-visible behaviour change, so no tests.
llvm-svn: 202258
The va_start macro for AArch64 must set va_list.__stack to the address
following the last named argument on the stack, rounded up to an alignment
of 8 bytes.
llvm-svn: 201797
As v1i1 is illegal, the type legalizer tries to scalarize such node. But if the type operands of SETCC is legal, the scalarization algorithm will cause an assertion failure.
llvm-svn: 201381
Summary:
AsmPrinter::EmitInlineAsm() will no longer use the EmitRawText() call for
targets with mature MC support. Such targets will always parse the inline
assembly (even when emitting assembly). Targets without mature MC support
continue to use EmitRawText() for assembly output.
The hasRawTextSupport() check in AsmPrinter::EmitInlineAsm() has been replaced
with MCAsmInfo::UseIntegratedAs which when true, causes the integrated assembler
to parse inline assembly (even when emitting assembly output). UseIntegratedAs
is set to true for targets that consider any failure to parse valid assembly
to be a bug. Target specific subclasses generally enable the integrated
assembler in their constructor. The default value can be overridden with
-no-integrated-as.
All tests that rely on inline assembly supporting invalid assembly (for example,
those that use mnemonics such as 'foo' or 'hello world') have been updated to
disable the integrated assembler.
Changes since review (and last commit attempt):
- Fixed test failures that were missed due to configuration of local build.
(fixes crash.ll and a couple others).
- Fixed tests that happened to pass because the local build was on X86
(should fix 2007-12-17-InvokeAsm.ll)
- mature-mc-support.ll's should no longer require all targets to be compiled.
(should fix ARM and PPC buildbots)
- Object output (-filetype=obj and similar) now forces the integrated assembler
to be enabled regardless of default setting or -no-integrated-as.
(should fix SystemZ buildbots)
Reviewers: rafael
Reviewed By: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2686
llvm-svn: 201333
Summary:
AsmPrinter::EmitInlineAsm() will no longer use the EmitRawText() call for targets with mature MC support. Such targets will always parse the inline assembly (even when emitting assembly). Targets without mature MC support continue to use EmitRawText() for assembly output.
The hasRawTextSupport() check in AsmPrinter::EmitInlineAsm() has been replaced with MCAsmInfo::UseIntegratedAs which when true, causes the integrated assembler to parse inline assembly (even when emitting assembly output). UseIntegratedAs is set to true for targets that consider any failure to parse valid assembly to be a bug. Target specific subclasses generally enable the integrated assembler in their constructor. The default value can be overridden with -no-integrated-as.
All tests that rely on inline assembly supporting invalid assembly (for example, those that use mnemonics such as 'foo' or 'hello world') have been updated to disable the integrated assembler.
Reviewers: rafael
Reviewed By: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2686
llvm-svn: 201237
There was an extremely confusing proliferation of LLVM intrinsics to implement
the vacge & vacgt instructions. This combines them all into two polymorphic
intrinsics, shared across both backends.
llvm-svn: 200768
Some of the SHA instructions take a scalar i32 as one argument (largely because
they work on 160-bit hash fragments). This wasn't reflected in the IR
previously, with ARM and AArch64 choosing different types (<4 x i32> and <1 x
i32> respectively) which was ugly.
This makes all the affected intrinsics take a uniform "i32", allowing them to
become non-polymorphic at the same time.
llvm-svn: 200706
When the scalar compare is between floating point and operands are
vector, we custom lower SELECT_CC to use NEON SIMD compare for
generating less instructions.
llvm-svn: 200365
The i8 type is not registered with any register class.
This causes a segmentation fault in MachineLICM::getRegisterClassIDAndCost.
The code selects the first type associated with register class FPR8,
which happens to be i8.
It uses this type (i8) to get the representative class pointer, which is 0.
It then uses this pointer to access a field, resulting in segmentation fault.
Since i8 type is not being used for printing any neon instruction
we can safely remove it.
llvm-svn: 200046
Tim Northover