Summary:
Implements the jump pseudo-instruction, which is used in e.g. the Linux kernel.
Reviewers: asb, lenary
Reviewed By: lenary
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73178
A known limitation for Future CPU is that the new prefixed instructions may
not cross 64 Byte boundaries.
All instructions are already 4 byte aligned so the only situation where this
can occur is when the prefix is in one 64 byte block and the instruction that
is prefixed is at the top of the next 64 byte block. To fix this case
PPCELFStreamer was added to intercept EmitInstruction. When a prefixed
instruction is emitted we try to align it to 64 Bytes by adding a maximum of
4 bytes. If the prefixed instruction crosses the 64 Byte boundary then the
alignment would trigger and a 4 byte nop would be added to push the
instruction into the next 64 byte block.
Differential Revision: https://reviews.llvm.org/D72570
A previous patch should have added pld and pstd and any support code in
the backend that is required for prefixed load and store type operations.
This patch adds a number of additional prefixed load and store type
instructions for the future CPU.
Differential Revision: https://reviews.llvm.org/D72577
This adds some missing MVE opcodes to evaluateBranch, which results in
llvm-objdump being able to print the PC relative branch target as an
annotation.
Differential Revision: https://reviews.llvm.org/D73553
Add the prefixed instructions pld and pstd to future CPU. These are load and
store instructions that require new operand types that are 34 bits. This patch
adds the two instructions as well as the operand types required.
Note that this patch also makes a minor change to tablegen to account for the
fact that some instructions are going to require shifts greater than 31 bits
for the new 34 bit instructions.
Differential Revision: https://reviews.llvm.org/D72574
Future CPU will include support for prefixed instructions.
These prefixed instructions are formed by a 4 byte prefix
immediately followed by a 4 byte instruction effectively
making an 8 byte instruction. The new instruction paddi
is a prefixed form of addi.
This patch adds paddi and all of the support required
for that instruction. The majority of the patch deals with
supporting the new prefixed instructions. The addition of
paddi is mainly to allow for testing.
Differential Revision: https://reviews.llvm.org/D72569
Summary:
This patch applies D60551 to an additional file. In particular, the test
is currently marked XFAIL for a number of big-endian targets; however,
the failure is actually dependent on the host endianness instead. The
test actually specifies a specific target triple.
Reviewers: rampitec, xingxue, daltenty
Reviewed By: rampitec
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, fedor.sergeev, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73192
Summary:
Previously, we would erroneously turn %pcrel_lo(label), where label has
a %pcrel_hi against a weak symbol, into %pcrel_lo(label + offset), as
evaluatePCRelLo would believe the target independent logic was going to
fold it. Moreover, even if that were fixed, shouldForceRelocation lacks
an MCAsmLayout and thus cannot evaluate the %pcrel_hi fixup to a value
and check the symbol, so we would then erroneously constant-fold the
%pcrel_lo whilst leaving the %pcrel_hi intact. After D72197, this same
sequence also occurs for symbols with global binding, which is triggered
in real-world code.
Instead, as discussed in D71978, we introduce a new FKF_IsTarget flag to
avoid these kinds of issues. All the resolution logic happens in one
place, with no coordination required between RISCAsmBackend and
RISCVMCExpr to ensure they implement the same logic twice. Although the
implementation of %pcrel_hi can be left as target independent, we make
it target dependent to ensure that they are handled identically to
%pcrel_lo, otherwise we risk one of them being constant folded but the
other being preserved. This also allows us to properly support fixup
pairs where the instructions are in different fragments.
Reviewers: asb, lenary, efriedma
Reviewed By: efriedma
Subscribers: arichardson, hiraditya, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73211
The idea is to produce R_X86_64_PLT32 instead of
R_X86_64_PC32 for branches.
It fixes https://bugs.llvm.org/show_bug.cgi?id=44397.
This patch teaches MC to do that for JCC (jump if condition is met)
instructions. The new behavior matches modern GNU as.
It is similar to D43383, which did the same for "call/jmp foo",
but missed JCC cases.
Differential revision: https://reviews.llvm.org/D72831
This change has 2 components:
Target-independent: add a method getDwarfFrameBase to TargetFrameLowering. It
describes how the Dwarf frame base will be encoded. That can be a register (the
default), the CFA (which replaces NVPTX-specific logic in DwarfCompileUnit), or
a DW_OP_WASM_location descriptr.
WebAssembly: Allow WebAssemblyFunctionInfo::getFrameRegister to return the
correct virtual register instead of FP32/SP32 after WebAssemblyReplacePhysRegs
has run. Make WebAssemblyExplicitLocals store the local it allocates for the
frame register. Use this local information to implement getDwarfFrameBase
The result is that the DW_AT_frame_base attribute is correctly encoded for each
subprogram, and each param and local variable has a correct DW_AT_location that
uses DW_OP_fbreg to refer to the frame base.
This is a reland of rG3a05c3969c18 with fixes for the expensive-checks
and Windows builds
Differential Revision: https://reviews.llvm.org/D71681
There was a change to trap1 instruction between v62 and v65. This
feature will allow the assembler/disassembler to handle different
variants depending on the CPU version.
GCC will accept any case for assembler directives.
For example ".abort" and ".ABORT" (even ".aBoRt")
are equivalent.
https://sourceware.org/binutils/docs/as/Pseudo-Ops.html#Pseudo-Ops
"The names are case insensitive for most targets,
and usually written in lower case."
Change llvm-mc to accept any case for generic directives
or aliases of those directives.
This for Bugzilla #39527.
Differential Revision: https://reviews.llvm.org/D72686
This change has 2 components:
Target-independent: add a method getDwarfFrameBase to TargetFrameLowering. It
describes how the Dwarf frame base will be encoded. That can be a register (the
default), the CFA (which replaces NVPTX-specific logic in DwarfCompileUnit), or
a DW_OP_WASM_location descriptr.
WebAssembly: Allow WebAssemblyFunctionInfo::getFrameRegister to return the
correct virtual register instead of FP32/SP32 after WebAssemblyReplacePhysRegs
has run. Make WebAssemblyExplicitLocals store the local it allocates for the
frame register. Use this local information to implement getDwarfFrameBase
The result is that the DW_AT_frame_base attribute is correctly encoded for each
subprogram, and each param and local variable has a correct DW_AT_location that
uses DW_OP_fbreg to refer to the frame base.
Differential Revision: https://reviews.llvm.org/D71681
Summary: This patch replaces the non-portable GNU diff option `--strip-trailing-cr` with the POSIX `-b` option in two test files.
Reviewers: daltenty, jasonliu
Reviewed By: daltenty
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72745
Summary:
This patch could be treated as a rebase of D33960. It also fixes PR35547.
A fix for `llvm/test/Other/close-stderr.ll` is proposed in D68164. Seems
the consensus is that the test is passing by chance and I'm not
sure how important it is for us. So it is removed like in D33960 for now.
The rest of the test fixes are just adding `--crash` flag to `not` tool.
** The reason it fixes PR35547 is
`exit` does cleanup including calling class destructor whereas `abort`
does not do any cleanup. In multithreading environment such as ThinLTO or JIT,
threads may share states which mostly are ManagedStatic<>. If faulting thread
tearing down a class when another thread is using it, there are chances of
memory corruption. This is bad 1. It will stop error reporting like pretty
stack printer; 2. The memory corruption is distracting and nondeterministic in
terms of error message, and corruption type (depending one the timing, it
could be double free, heap free after use, etc.).
Reviewers: rnk, chandlerc, zturner, sepavloff, MaskRay, espindola
Reviewed By: rnk, MaskRay
Subscribers: wuzish, jholewinski, qcolombet, dschuff, jyknight, emaste, sdardis, nemanjai, jvesely, nhaehnle, sbc100, arichardson, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, lenary, s.egerton, pzheng, cfe-commits, MaskRay, filcab, davide, MatzeB, mehdi_amini, hiraditya, steven_wu, dexonsmith, rupprecht, seiya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D67847
The 16 bank LDS case is complicated due to using multiple
instructions. If I attempt to write a pattern for it, the generated
selector incorrectly places the copy to m0 after the first
instruction, so that needs to be separately addressed.
Also fix not gluing the copy to m0 to the second operation in the
second half of the 16 bank lowering.
This flag was originally part of D70157, but was removed as we carved away pieces of the review. Since we have the nop support checked in, and it appears mature(*), I think it's time to add the master flag. For now, it will default to nop padding, but once the prefix padding support lands, we'll update the defaults.
(*) I can now confirm that downstream testing of the changes which have landed to date - nop padding and compiler support for suppressions - is passing all of the functional testing we've thrown at it. There might still be something lurking, but we've gotten enough coverage to be confident of the basic approach.
Note that the new flag can be used either when assembling an .s file, or when using the integrated assembler directly from the compiler. The later will use all of the suppression mechanism and should always generate correct code. We don't yet have assembly syntax for the suppressions, so passing this directly to the assembler w/a raw .s file may result in broken code. Use at your own risk.
Also note that this isn't the wiring for the clang option. I think the most recent review for that is D72227, but I've lost track, so that might be off.
Differential Revision: https://reviews.llvm.org/D72738
Summary:
This patch fixes pr23772 [ARM] r226200 can emit illegal thumb2 instruction: "sub sp, r12, #80".
The violation was that SUB and ADD (reg, immediate) instructions can only write to SP if the source register is also SP. So the above instructions was unpredictable.
To enforce that the instruction t2(ADD|SUB)ri does not write to SP we now enforce the destination register to be rGPR (That exclude PC and SP).
Different than the ARM specification, that defines one instruction that can read from SP, and one that can't, here we inserted one that can't write to SP, and other that can only write to SP as to reuse most of the hard-coded size optimizations.
When performing this change, it uncovered that emitting Thumb2 Reg plus Immediate could not emit all variants of ADD SP, SP #imm instructions before so it was refactored to be able to. (see test/CodeGen/Thumb2/mve-stacksplot.mir where we use a subw sp, sp, Imm12 variant )
It also uncovered a disassembly issue of adr.w instructions, that were only written as SUBW instructions (see llvm/test/MC/Disassembler/ARM/thumb2.txt).
Reviewers: eli.friedman, dmgreen, carwil, olista01, efriedma, andreadb
Reviewed By: efriedma
Subscribers: gbedwell, john.brawn, efriedma, ostannard, kristof.beyls, hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70680
Summary:
This adds checks that the expected error was actually reported against
the correct instruction, and fixes a couple of problems that that showed
up: one incorrect W32-ERR:
v_cmp_class_f16_sdwa vcc, v1, v2 src0_sel:DWORD src1_sel:DWORD
// W64: encoding: [0xf9,0x04,0x1e,0x7d,0x01,0x00,0x06,0x06]
-// W32-ERR: error: invalid operand for instruction
+// W32-ERR: error: {{instruction not supported on this GPU|invalid operand for instruction}}
and one missing W32-ERR:
v_cmp_class_f16_sdwa s[6:7], v1, v2 src0_sel:DWORD src1_sel:DWORD
// W64: encoding: [0xf9,0x04,0x1e,0x7d,0x01,0x86,0x06,0x06]
+// W32-ERR: error: invalid operand for instruction
Reviewers: rampitec, arsenm
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72611
Summary:
This adds assembler tests for cases that were previously only in the
disassembler tests, and vice versa.
Reviewers: rampitec, arsenm, nhaehnle
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72592
Summary:
The Pointer Authentication Extension (PAC) was added in Armv8.3-A. Some
instructions are implemented in the HINT space to allow compiling code
common to CPUs regardless of whether they feature PAC or not, and still
benefit from PAC protection in the PAC-enabled CPUs.
The 8.3-specific mnemonics were currently enabled in any architecture, and
LLVM was emitting them in assembly files when PAC code generation was
enabled. This was ok for compilations where both LLVM codegen and the
integrated assembler were used. However, the LLVM codegen was not
compatible with other assemblers (e.g. GAS). Given the fact that the
approach from these assemblers (i.e. to disallow Armv8.3-A mnemonics if
compiling for Armv8.2-A or lower) is entirely reasonable, this patch makes
LLVM to emit HINT when building for Armv8.2-A and below, instead of
PACIASP, AUTIASP and friends. Then, LLVM assembly should be compatible
with other assemblers.
Reviewers: samparker, chill, LukeCheeseman
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71658
When compiling position-independent executables, we now use
DW_EH_PE_pcrel | DW_EH_PE_sdata4. However, the MIPS ABI does not define a
64-bit PC-relative ELF relocation so we cannot use sdata8 for the large
code model case. When using the large code model, we fall back to the
previous behaviour of generating absolute relocations.
With this change clang-generated .o files can be linked by LLD without
having to pass -Wl,-z,notext (which creates text relocations).
This is simpler than the approach used by ld.bfd, which rewrites the
.eh_frame section to convert absolute relocations into relative references.
I saw in D13104 that apparently ld.bfd did not accept pc-relative relocations
for MIPS ouput at some point. However, I also checked that recent ld.bfd
can process the clang-generated .o files so this no longer seems true.
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D72228
Summary:
AMO memory operands use a custom parser in order to accept both (reg)
and 0(reg). However, the validation predicate used for these operands
was only checking that they were registers, and not the register class,
so non-GPRs (such as FPRs) were also accepted. Thus, fix this by making
the predicate check that they are GPRs.
Reviewers: asb, lenary
Reviewed By: asb, lenary
Subscribers: hiraditya, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72471
For a target symbol defined in the same section, currently we don't emit
a relocation if VariantKind is VK_None (with few exceptions like RISC-V
relaxation), while GNU as emits one. This causes program behavior
differences with and without -ffunction-sections, and can break intended
symbol interposition in a -shared link.
```
.globl foo
foo:
call foo # no relocation. On other targets, may be written as b foo, etc
call bar # a relocation if bar is in another section (e.g. -ffunction-sections)
call foo@plt # a relocation
```
Unify these cases by always emitting a relocation. If we ever want to
optimize `call foo` in -shared links, we should emit a STB_LOCAL alias
and call via the alias.
ARM/thumb2-beq-fixup.s: we now emit a relocation to global_thumb_fn as GNU as does.
X86/Inputs/align-branch-64-2.s: we now emit R_X86_64_PLT32 to foo as GNU does.
ELF/relax.s: rewrite the test as target-in-same-section.s .
We omitted relocations to `global` and now emit R_X86_64_PLT32.
Note, GNU as does not emit a relocation for `jmp global` (maybe its own
bug). Our new behavior is compatible except `jmp global`.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D72197
Summary:
This adds assembler tests for cases that were previously only in the
disassembler tests, and vice versa.
Reviewers: rampitec, arsenm, nhaehnle
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72561
The primary motivation of this change is to bring the code more closely in sync behavior wise with the assembler's version of nop emission. I'd like to eventually factor them into one, but that's hard to do when one has features the other doesn't.
The longest encodeable nop on x86 is 15 bytes, but many processors - for instance all intel chips - can't decode the 15 byte form efficiently. On those processors, it's better to use either a 10 byte or 11 byte sequence depending.
Summary:
This patch fixes pr23772 [ARM] r226200 can emit illegal thumb2 instruction: "sub sp, r12, #80".
The violation was that SUB and ADD (reg, immediate) instructions can only write to SP if the source register is also SP. So the above instructions was unpredictable.
To enforce that the instruction t2(ADD|SUB)ri does not write to SP we now enforce the destination register to be rGPR (That exclude PC and SP).
Different than the ARM specification, that defines one instruction that can read from SP, and one that can't, here we inserted one that can't write to SP, and other that can only write to SP as to reuse most of the hard-coded size optimizations.
When performing this change, it uncovered that emitting Thumb2 Reg plus Immediate could not emit all variants of ADD SP, SP #imm instructions before so it was refactored to be able to. (see test/CodeGen/Thumb2/mve-stacksplot.mir where we use a subw sp, sp, Imm12 variant )
It also uncovered a disassembly issue of adr.w instructions, that were only written as SUBW instructions (see llvm/test/MC/Disassembler/ARM/thumb2.txt).
Reviewers: eli.friedman, dmgreen, carwil, olista01, efriedma
Reviewed By: efriedma
Subscribers: john.brawn, efriedma, ostannard, kristof.beyls, hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70680
The patch gives out the details of the znver2 scheduler model.
There are few improvements with respect to execution units, latencies and
throughput when compared with znver1.
The tests that were present for znver1 for llvm-mca tool were replicated.
The latencies, execution units, timeline and throughput information are updated for znver2.
Reviewers: craig.topper, Simon Pilgrim
Differential Revision: https://reviews.llvm.org/D66088
Summary:
This is analogous to D58943, which correctly finds the corresponding
fixup. However, when linker relaxations are disabled and we evaluate the
fixup, we need to also ensure we use an offset of 0 rather than the size
of the previous fragment.
Reviewers: asb, efriedma, lenary
Reviewed By: efriedma
Subscribers: hiraditya, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71978
Summary:
Amend MS offset operator implementation, to more closely fit with its MS counterpart:
1. InlineAsm: evaluate non-local source entities to their (address) location
2. Provide a mean with which one may acquire the address of an assembly label via MS syntax, rather than yielding a memory reference (i.e. "offset asm_label" and "$asm_label" should be synonymous
3. address PR32530
Based on http://llvm.org/D37461
Fix broken test where the break appears unrelated.
- Set up appropriate memory-input rewrites for variable references.
- Intel-dialect assembly printing now correctly handles addresses by adding "offset".
- Pass offsets as immediate operands (using "r" constraint for offsets of locals).
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D71436
If we have references to the same extern_weak in multiple objects,
all of them would generate external symbols with the same name. Make
them static to avoid duplicate definitions; nothing should need to
refer to this symbol outside of the current object.
GCC/binutils seems to handle the same by not using a fixed string
for the ".default" suffix, but instead using the name of some other
defined external symbol from the same object (which is supposed to
be unique among objects unless there's other duplicate definitions).
Differential Revision: https://reviews.llvm.org/D71711
David Spickett