Add support for the `-fdebug-prefix-map=` option as in GCC. The syntax is
`-fdebug-prefix-map=OLD=NEW`. When compiling files from a path beginning with
OLD, change the debug info to indicate the path as start with NEW. This is
particularly helpful if you are preprocessing in one path and compiling in
another (e.g. for a build cluster with distcc).
Note that the linearity of the implementation is not as terrible as it may seem.
This is normally done once per file with an expectation that the map will be
small (1-2) entries, making this roughly linear in the number of input paths.
Addresses PR24619.
llvm-svn: 250094
when building a module. Clang already records the module signature when
building a skeleton CU to reference a clang module.
Matching the id in the skeleton with the one in the module allows a DWARF
consumer to verify that they found the correct version of the module
without them needing to know about the clang module format.
llvm-svn: 248345
The signature may not have been computed at the time the module reference
is generated (e.g.: in the future while emitting debug info for a clang
module). Using the full module name is safe because each clang module may
only have a single definition.
NFC.
llvm-svn: 248037
clang modules, if -dwarf-ext-refs (DebugTypesExtRefs) is specified.
This reimplements r247369 in about a third of the amount of code.
Thanks to David Blaikie pointing this out in post-commit review!
llvm-svn: 247432
When -fmodule-format is set to "obj", emit debug info for all types
declared in a module or referenced by a declaration into the module's
object file container.
This patch adds support for Objective-C types and methods.
llvm-svn: 247068
Usually debug info is created on the fly while during codegen.
With this API it becomes possible to create standalone debug info
for types that are not referenced by any code, such as emitting debug info
for a clang module or for implementing something like -gfull.
Because on-the-fly debug info generation may still insert retained types
on top of them, all RetainedTypes are uniqued in CGDebugInfo::finalize().
llvm-svn: 246210
to enable the use of external type references in the debug info
(a.k.a. module debugging).
The driver expands -gmodules to "-g -fmodule-format=obj -dwarf-ext-refs"
and passes that to cc1. All this does at the moment is set a flag
codegenopts.
http://reviews.llvm.org/D11958
llvm-svn: 246192
a BumpPtrAllocator. This at least now handles the case where there is no
concatentation without calling memcpy on a null pointer. It might be
interesting to handle the case where everything is empty without
round-tripping through the allocator, but it wasn't clear to me if the
pointer returned is significant in any way, so I've left it in
a conservatively more-correct state.
Again, found with UBSan.
llvm-svn: 243948
Adjust to LLVM DIBuilder API changes in r243764, using
`createAutoVariable()` and `createParameterVariable()` in place of
`createLocalVariable()`. No real functionality change here.
llvm-svn: 243765
Change `getOrCreateLimitedType()` to return a `DICompositeType` and
remove the casts from its callers. Inside, I've strengthened a `cast`
from `DICompositeTypeBase`, but the casts in the callers already prove
that this is safe. There should be no functionality change here.
llvm-svn: 243155
different function signatures. (Previously clang would emit all block
pointer types with the type of the first block pointer in the compile
unit.)
rdar://problem/21602473
llvm-svn: 241534
Function static variables, typedefs and records (class, struct or union) declared inside
a lexical scope were associated with the function as their parent scope, rather than the
lexical scope they are defined or declared in.
This fixes PR19238
Patch by: amjad.aboud@intel.com
Differential Revision: http://reviews.llvm.org/D9760
llvm-svn: 241154
This allows a module-aware debugger such as LLDB to import the currently
visible modules before dropping into the expression evaluator.
rdar://problem/20965932
llvm-svn: 241084
LLVM r236120 renamed debug info IR constructs to use a `DI` prefix, now
that the `DIDescriptor` hierarchy has been gone for about a week. This
commit was generated using the rename-md-di-nodes.sh upgrade script
attached to PR23080, followed by running clang-format-diff.py on the
`lib/` portion of the patch.
llvm-svn: 236121
An upcoming LLVM commit will remove the `DIArray` and `DITypeArray`
typedefs that shadow `DebugNodeArray` and `MDTypeRefArray`,
respectively. Use those types directly.
llvm-svn: 235412
Prepare for the deletion in LLVM of the subclasses of (the already
deleted) `DIScope` by using the raw pointers they were wrapping
directly.
llvm-svn: 235355
Subclasses of (the already deleted) `DIType` will be deleted by an
upcoming LLVM commit. Remove references.
While `DICompositeType` wraps `MDCompositeTypeBase` and `DIDerivedType`
wraps `MDDerivedTypeBase`, most uses of each really meant the more
specific `MDCompositeType` and `MDDerivedType`. I updated accordingly.
llvm-svn: 235350
LLVM r235111 changed the `DIBuilder` API to stop using `DIDescriptor`
and its subclasses. Rolled into this was some tightening up of types:
- Scopes: `DIDescriptor` => `MDScope*`.
- Generic debug nodes: `DIDescriptor` => `DebugNode*`.
- Subroutine types: `DICompositeType` => `MDSubroutineType*`.
- Composite types: `DICompositeType` => `MDCompositeType*`.
Note that `DIDescriptor` wraps `MDNode`, and `DICompositeType` wraps
`MDCompositeTypeBase`.
It's this new type strictness that requires changes here.
llvm-svn: 235112
distinction between the different use-cases. With the previous default
behavior we would occasionally emit empty debug locations in situations
where they actually were strictly required (= on invoke insns).
We now have a choice between defaulting to an empty location or an
artificial location.
Specifically, this fixes a bug caused by a missing debug location when
emitting C++ EH cleanup blocks from within an artificial function, such as
an ObjC destroy helper function.
rdar://problem/19670595
llvm-svn: 228003
This is half a fix for a GDB test suite failure that expects to start at
'a' in the following code:
void func(int a)
if (a
&&
b)
...
But instead, without this change, the comparison was assigned to '&&'
(well, worse actually - because there was a chained 'a && b && c' and it
was assigned to the second '&&' because of a recursive application of
this bug) and then the load folded into the comparison so breaking on
the function started at '&&' instead of 'a'.
The other part of this needs to be fixed in LLVM where it's ignoring the
location of the icmp and instead using the location of the branch
instruction.
The fix to the conditional operator is actually a no-op currently,
because the conditional operator's location coincides with 'a' (the
start of the conditional expression) but should probably be '?' instead.
See the FIXME in the test case that mentions the ARCMigration tool
failures when I tried to make that change.
llvm-svn: 227356
This causes things like assignment to refer to the '=' rather than the
LHS when attributing the store instruction, for example.
There were essentially 3 options for this:
* The beginning of an expression (this was the behavior prior to this
commit). This meant that stepping through subexpressions would bounce
around from subexpressions back to the start of the outer expression,
etc. (eg: x + y + z would go x, y, x, z, x (the repeated 'x's would be
where the actual addition occurred)).
* The end of an expression. This seems to be what GCC does /mostly/, and
certainly this for function calls. This has the advantage that
progress is always 'forwards' (never jumping backwards - except for
independent subexpressions if they're evaluated in interesting orders,
etc). "x + y + z" would go "x y z" with the additions occurring at y
and z after the respective loads.
The problem with this is that the user would still have to think
fairly hard about precedence to realize which subexpression is being
evaluated or which operator overload is being called in, say, an asan
backtrace.
* The preferred location or 'exprloc'. In this case you get sort of what
you'd expect, though it's a bit confusing in its own way due to going
'backwards'. In this case the locations would be: "x y + z +" in
lovely postfix arithmetic order. But this does mean that if the op+
were an operator overload, say, and in a backtrace, the backtrace will
point to the exact '+' that's being called, not to the end of one of
its operands.
(actually the operator overload case doesn't work yet for other reasons,
but that's being fixed - but this at least gets scalar/complex
assignments and other plain operators right)
llvm-svn: 227027
This workaround was to provide unique call sites to ensure LLVM's inline
debug info handling would properly unique two calls to the same function
on the same line. Instead, this has now been fixed in LLVM (r226736) and
the workaround here can be removed.
Originally committed in r176895, but this isn't a straight revert due to
all the changes since then. I just searched for anything ForcedColumn*
related and removed them.
We could test this - but it didn't strike me as terribly valuable once
we're no longer adding this workaround everything just works as expected
& it's no longer a special case to test for.
llvm-svn: 226738
The code setting the debug location being removed here was accidentally
leaking a location into the call to the non-static data member's ctor
call. Without it the call had no location and could cause assertion
failures if it was inlined. Now that it has a location (and a correct
one at that) this code should hopefully be no longer needed.
It's possible of course that other parts of the debug info are also
relying on the debug locations being set here to leak to where they're
needed - so we might see the same assertions again & will have to
investigate what the dependence was/is. But the chances are good that
any of those are debug info line table quality bugs we've just not found
yet anyway - so it'll be good to flush them out.
llvm-svn: 226383
Several pieces of code were relying on implicit debug location setting
which usually lead to incorrect line information anyway. So I've fixed
those (in r225955 and r225845) separately which should pave the way for
this commit to be cleanly reapplied.
The reason these implicit dependencies resulted in crashes with this
patch is that the debug location would no longer implicitly leak from
one place to another, but be set back to invalid. Once a call with
no/invalid location was emitted, if that call was ever inlined it could
produce invalid debugloc chains and assert during LLVM's codegen.
There may be further cases of such bugs in this patch - they're hard to
flush out with regression testing, so I'll keep an eye out for reports
and investigate/fix them ASAP if they come up.
Original commit message:
Reapply "DebugInfo: Generalize debug info location handling"
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 225956
Benjamin Kramer