This was changed in rL276151 and causes problems if the C++ compiler does not
support the same arches as the C compiler.
For the builtins, only the C compiler is tested in try_compile_only.
Additionally, -fno-exceptions is passed in (if available) to work around
the case where no libunwind is available.
Differential Revision: https://reviews.llvm.org/D23654
llvm-svn: 282054
Summary:
Much of the non-Darwin build system assumes that COMPILER_RT_DEFAULT_TARGET_TRIPLE is the default target triple for the compiler being used. With clang as your compiler this isn't necessarily true.
To ensure that the rest of the build system behaves as expected this patch adds "--target=${COMPILER_RT_DEFAULT_TARGET_TRIPLE}" to the compiler flags for C, CXX and ASM sources.
Reviewers: compnerd, rengolin, fjricci
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24156
llvm-svn: 282024
Currently, when doing a ASanified build of LLVM (with Clang, compiler-rt and libcxx) via -DLLVM_USE_SANITIZER=Address and not using any other options, we already disable building of sanitizer runtimes (because they themselves can’t be sanitized) and also exclude the sanitizer tests. However, the same is not done for the profiling runtime, which will build fine, but then all the tests fail due to linking errors. Let’s disable the profiling runtime as well (when LLVM_USE_SANITIZER is set).
Differential Revision: https://reviews.llvm.org/D24657
llvm-svn: 281815
Support overriding LLVM_* variables obtained from llvm-config when doing
stand-alone builds. The override of LLVM_MAIN_SRC_DIR is necessary to
provide LLVM sources when the initial directory used to build LLVM does
no longer exist when compiler-rt is built stand-alone. This is
especially the case when building the projects separately in temporary
directories with unpredictable names.
The code is based on existing CMakeLists.txt from clang. Alike clang, it
extends the override to all queried variables.
Differential Revision: https://reviews.llvm.org/D24005
llvm-svn: 281461
Summary:
A few small changes required to permit building the sanitizers
with Clang instead of only with MSVC.
Reviewers: compnerd, beanz, rnk
Subscribers: beanz, timurrrr, kubabrecka, dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D24092
llvm-svn: 280863
Summary:
Make sure that windows libraries contain the suffixes expected by clang.
This is expecially important when compiling the windows builtins with
clang, as cmake will use .a as the suffix by default.
Reviewers: beanz, compnerd
Subscribers: llvm-commits, dberris
Differential Revision: https://reviews.llvm.org/D24046
llvm-svn: 280854
With this patch 10 out of 13 tests are passing.
Following is the list of failing tests:
struct-simple.cpp
workingset-signal-posix.cpp
mmap-shadow-conflict.c
Reviewed by bruening
Differential: D23799
llvm-svn: 280795
There was an invalid entry in the sanitizer list, remove it. This has no effect
on the building, just removes the definition of a cached variable.
llvm-svn: 280378
This patch builds on LLVM r279776.
In this patch I've done some cleanup and abstracted three common steps runtime components have in their CMakeLists files, and added a fourth.
The three steps I abstract are:
(1) Add a top-level target (i.e asan, msan, ...)
(2) Set the target properties for sorting files in IDE generators
(3) Make the compiler-rt target depend on the top-level target
The new step is to check if a command named "runtime_register_component" is defined, and to call it with the component name.
The runtime_register_component command is defined in llvm/runtimes/CMakeLists.txt, and presently just adds the component to a list of sub-components, which later gets used to generate target mappings.
With this patch a new workflow for runtimes builds is supported. The new workflow when building runtimes from the LLVM runtimes directory is:
> cmake [...]
> ninja runtimes-configure
> ninja asan
The "runtimes-configure" target builds all the dependencies for configuring the runtimes projects, and runs CMake on the runtimes projects. Running the runtimes CMake generates a list of targets to bind into the top-level CMake so subsequent build invocations will have access to some of Compiler-RT's targets through the top-level build.
Note: This patch does exclude some top-level targets from compiler-rt libraries because they either don't install files (sanitizer_common), or don't have a cooresponding `check` target (stats).
llvm-svn: 279863
Summary:
Since we generate the compiler invocation on our own, we need to
manually add -target if CMAKE_C_COMPILER_TARGET has been specified.
Reviewers: compnerd, beanz
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23823
llvm-svn: 279747
Summary: This fixes the omission of -fPIC when building the builtins.
Reviewers: compnerd, beanz
Subscribers: dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D23729
llvm-svn: 279469
This should resolve PR23162. This patch has two parts.
First we need to check the error code from xcodebuild when querying for SDKs, second if the OS X SDK is not discovered, we ensure that /usr/include exists and use / as the OS X sysroot.
llvm-svn: 279336
This is a wrapper target of all the component install targets. This wrapper target will be used by the new LLVM runtimes directory to connect top-level targets to the runtime project target.
llvm-svn: 279333
Introduce a new CMake option `COMPILER_RT_SANITIZERS_TO_BUILD` which takes
either a special token `all` (default) which will preserve the current behaviour
or a CMake list of sanitizers to build. It will still perform the normal checks
if the sanitizer is requested. It only permits a further means to exclude a
particular sanitizer. This gives finer grained control than
`COMPILER_RT_BUILD_SANITIZERS` which only gives an all or nothing control.
llvm-svn: 279253
This fixes a long-standing TODO by implementing a compiler check for supporting the _Atomic keyword. If the _Atomic keyword is supported by the compiler we should include it in the builtin library sources.
llvm-svn: 278454
Summary: rnk reported that MSVC ignores unknown flags and still returns 0. This should cause unknown flags to be an error during the compiler check.
Reviewers: rnk
Subscribers: brad.king, llvm-commits
Differential Revision: https://reviews.llvm.org/D23030
llvm-svn: 277377
Allowing this variable to be cached makes it possible to repair the MIPS
buildbots in lieu of either fixing the mips64 sanitizer issues or fixing the
detection of mips64 support (which I think was changed by r268977 but didn't
take effect on this buildbot until the last couple days) so that it returns to
not being built on these buildbots.
llvm-svn: 276402
I think it's wiped out the build area and fully-reconfigured for the first time
since r268977. This seems to have caused Mips64 to become enabled when it wasn't
before because compiling with -mabi=64 succeeds but linking with -mabi=64 fails.
llvm-svn: 276256
Summary:
This is a fixed-up version of D21612, to address failure identified post-commit.
Original commit description:
This patch implements the initialisation and patching routines for the XRay runtime, along with the necessary trampolines for function entry/exit handling. For now we only define the basic hooks for allowing an implementation to define a handler that gets run on function entry/exit. We expose a minimal API for controlling the behaviour of the runtime (patching, cleanup, and setting the handler to invoke when instrumenting).
Fixes include:
- Gating XRay build to only Linux x86_64 and with the right dependencies in case it is the only library being built
- Including <cstddef> to fix std::size_t issue
Reviewers: kcc, rnk, echristo
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D22611
llvm-svn: 276251
and also the follow-up "[xray] Only build xray on Linux for now"
Two build errors were reported on the llvm-commits list:
[ 88%] Building CXX object lib/xray/CMakeFiles/clang_rt.xray-x86_64.dir/xray_flags.cc.o
/mnt/b/sanitizer-buildbot1/sanitizer-x86_64-linux/build/llvm/projects/compiler-rt/lib/xray/xray_init.cc:23:10: fatal error: 'llvm/Support/ELF.h' file not found
#include "llvm/Support/ELF.h"
^
and
In file included from /w/src/llvm.org/projects/compiler-rt/lib/xray/xray_interface.cc:16:
/w/src/llvm.org/projects/compiler-rt/lib/xray/xray_interface_internal.h:36:8: error:
no type named 'size_t' in namespace 'std'
std::size_t Entries;
~~~~~^
llvm-svn: 276186
Summary:
A sysroot without c++ headers is able to build compiler-rt, don't
require them when configuring available architectures from cmake.
Reviewers: samsonov, beanz, compnerd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22469
llvm-svn: 276151
Summary:
Use stricter comparisons for architecture. This prevents cmake from failing
for sysroots which can only compile armhf and not arm, since
arm MATCHES armhf is true, while arm STREQUAL armhf is false.
Reviewers: beanz, compnerd
Subscribers: aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D22473
llvm-svn: 276148
Should fix the Windows buildbots, and maybe some other non-Linux Unix
bots too.
XRay currently depends on sanitizer_common, so associate it with the
"build sanitizers" option and remove the option for separately
controlling the XRay build.
llvm-svn: 276124
Summary:
This patch implements the initialisation and patching routines for the XRay runtime, along with the necessary trampolines for function entry/exit handling. For now we only define the basic hooks for allowing an implementation to define a handler that gets run on function entry/exit. We expose a minimal API for controlling the behaviour of the runtime (patching, cleanup, and setting the handler to invoke when instrumenting).
Depends on D19904
Reviewers: echristo, kcc, rnk
Subscribers: rnk, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D21612
llvm-svn: 276117
Summary:
This patch is a refactoring of the way cmake 'targets' are grouped.
It won't affect non-UI cmake-generators.
Clang/LLVM are using a structured way to group targets which ease
navigation through Visual Studio UI. The Compiler-RT projects
differ from the way Clang/LLVM are grouping targets.
This patch doesn't contain behavior changes.
Reviewers: kubabrecka, rnk
Subscribers: wang0109, llvm-commits, kubabrecka, chrisha
Differential Revision: http://reviews.llvm.org/D21952
llvm-svn: 275111
The triple must be parsed in base-config-ix.cmake.
Otherwise, the cmake variable ANDROID won't be set and this
will confuse cmake to build unsupported targets targeted for
android.
Diferential revision: http://reviews.llvm.org/D21474
llvm-svn: 273914
Summary:
The MSVC compiler is complaining about invalid flags. The CFLAGS are passed
to the linker (i.e. /Gy-, ...).
Reviewers: rnk
Subscribers: llvm-commits, kubabrecka, chrisha
Differential Revision: http://reviews.llvm.org/D21554
llvm-svn: 273265
Peter Collingbourne