exception specifications on member functions until after the closing
'}' for the containing class. This allows, for example, a member
function to throw an instance of its own class. Fixes PR12564 and a
fairly embarassing oversight in our C++98/03 support.
llvm-svn: 154844
in the declaration of a non-static member function after the
(optional) cv-qualifier-seq, which in practice means in the exception
specification and late-specified return type.
The new scheme here used to manage 'this' outside of a member function
scope is more general than the Scope-based mechanism previously used
for non-static data member initializers and late-parsesd attributes,
because it can also handle the cv-qualifiers on the member
function. Note, however, that a separate pass is required for static
member functions to determine whether 'this' was used, because we
might not know that we have a static function until after declaration
matching.
Finally, this introduces name mangling for 'this' and for the implicit
'this', which is intended to match GCC's mangling. Independent
verification for the new mangling test case would be appreciated.
Fixes PR10036 and PR12450.
llvm-svn: 154799
Instead, make it the allocation function's responsibility to add them
to a list and clear it when a top-level decl is finished.
This plugs leakage of TemplateAnnotationIds. DelayedCleanupPool is
ugly and unused, remove it.
llvm-svn: 154743
attached. Since we do not support any attributes which appertain to a statement
(yet), testing of this is necessarily quite minimal.
Patch by Alexander Kornienko!
llvm-svn: 154723
* Alternative tokens (such as 'compl') are treated as identifiers in
attribute names.
* An attribute-list can start with a comma.
* An ellipsis may not be used with either of our currently-supported
C++11 attributes.
llvm-svn: 154381
* In C++11, '[[' is ill-formed unless it starts an attribute-specifier. Reject
array sizes and array indexes which begin with a lambda-expression. Recover by
parsing the lambda as a lambda.
* In Objective-C++11, either '[' could be the start of a message-send.
Fully disambiguate this case: it turns out that the grammars of message-sends,
lambdas and attributes do not actually overlap. Accept any occurrence of '[['
where either '[' starts a message send, but reject a lambda in an array index
just like in C++11 mode.
Implement a couple of changes to the attribute wording which occurred after our
attributes implementation landed:
* In a function-declaration, the attributes go after the exception specification,
not after the right paren.
* A reference type can have attributes applied.
* An 'identifier' in an attribute can also be a keyword. Support for alternative
tokens (iso646 keywords) in attributes to follow.
And some bug fixes:
* Parse attributes after declarator-ids, even if they are not simple identifiers.
* Do not accept attributes after a parenthesized declarator.
* Accept attributes after an array size in a new-type-id.
* Partially disamiguate 'delete' followed by a lambda. More work is required
here for the case where the lambda-introducer is '[]'.
llvm-svn: 154369
Specifically, using a an integer outside [0, 1] as a boolean constant seems to
be an easy mistake to make with things like "x == a || b" where the author
intended "x == a || x == b".
The bug caused by calling SkipUntil with three token kinds was also identified
by a VC diagnostic & reported by Francois Pichet as review feedback for my
commit r154163. I've included test cases to verify the error recovery that was
broken/poorly implemented due to this bug.
The other fix (lib/Sema/SemaExpr.cpp) seems like that code was never actually
reached in any of Clang's tests & is related to Objective C features I'm not
familiar with, so I've not been able to construct a test case for it. Perhaps
someone else can.
llvm-svn: 154325
In a few cases clang emitted a rather content-free diagnostic: 'parse error'.
This change replaces two actual cases (template parameter parsing and K&R
parameter declaration parsing) with more specific diagnostics and removes a
third dead case of this in the BalancedDelimiterTracker (the ctor already
checked the invariant necessary to ensure that the diag::parse_error was never
actually used).
llvm-svn: 154224
The warning this inhibits, -Wobjc-root-class, is opt-in for now. However, all clang unit tests that would trigger
the warning have been updated to use -Wno-objc-root-class. <rdar://problem/7446698>
llvm-svn: 154187
Based on Doug's feedback to r153887 this omits the FixIt if the following token
isn't syntactically valid for the context. (not a comma, '...', identifier,
'>', or '>>')
There's a bunch of work to handle the '>>' case, but it makes for a much more
pleasant diagnostic in this case.
llvm-svn: 154163
a type specifier and can be combined with unsigned. This allows libstdc++4.7 to
be used with clang in c++98 mode.
Several other changes are still required for libstdc++4.7 to work with clang in
c++11 mode.
llvm-svn: 153999
The diagnostic message correctly informs the user that they have omitted the
'class' keyword, but neither suggests this insertion as a fixit, nor attempts
to recover as if they had provided the keyword.
This fixes the recovery, adds the fixit, and adds a separate diagnostic and
corresponding replacement fixit for cases where the user wrote 'struct' or
'typename' instead of 'class' (suggested by Richard Smith as a possible common
mistake).
I'm not sure the diagnostic message for either the original or new cases feel
very Clang-esque, so I'm open to suggestions there. The fixit hints make it
fairly easy to see what's required, though.
llvm-svn: 153887
constructor, but X is not a known typename, check whether the tokens could
possibly match the syntax of a declarator before concluding that it isn't
a constructor. If it's definitely ill-formed, assume it is a constructor.
Empirical evidence suggests that this pattern is much more often a
constructor with a typoed (or not-yet-declared) type name than any of the
other possibilities, so the extra cost of the check is not expected to be
problematic.
llvm-svn: 153488
Enable incremental parsing by the Preprocessor,
where more code can be provided after an EOF.
It mainly prevents the tearing down of the topmost lexer.
To be used like this:
PP.enableIncrementalProcessing();
while (getMoreSource()) {
while (Parser.ParseTopLevelDecl(ADecl)) {...}
}
PP.enableIncrementalProcessing(false);
llvm-svn: 152914
being defined here: [] () -> struct S {} does not define struct S.
In passing, implement DR1318 (syntactic disambiguation of 'final').
llvm-svn: 152551
defined here, but not semantically, so
new struct S {};
is always ill-formed, even if there is a struct S in scope.
We also had a couple of bugs in ParseOptionalTypeSpecifier caused by it being
under-loved (due to it only being used in a few places) so merge it into
ParseDeclarationSpecifiers with a new DeclSpecContext. To avoid regressing, this
required improving ParseDeclarationSpecifiers' diagnostics in some cases. This
also required teaching ParseSpecifierQualifierList about constexpr... which
incidentally fixes an issue where we'd allow the constexpr specifier in other
bad places.
llvm-svn: 152549
for a few kinds of error. Specifically:
Since we're after translation phase 6, the "" token might be formed by multiple
source-level string literals. Checking the token width is not a correct way of
detecting empty string literals, due to escaped newlines. Diagnose and recover
from a missing space between "" and suffix, and from string literals other than
"", which are followed by a suffix.
llvm-svn: 152348
paren/brace/bracket tracking (the Consume* functions already did it),
removing the use of ConsumeAnyToken(), and moving the hot paths inline
with the error paths out-of-line.
llvm-svn: 152274
This submission improves Clang sema handling by using Clang tablegen
to generate common boilerplate code. As a start, it implements AttributeList
enumerator generation and case statements for AttributeList::getKind.
A new field "SemaHandler" is introduced in Attr.td and by default set to 1
as most of attributes in Attr.td have semantic checking in Sema. For a small
number of attributes that don't appear in Sema, the value is set to 0.
Also there are a small number of attributes that only appear in Sema but not
in Attr.td. Currently these attributes are still hardcoded in Sema AttributeList.
Reviewed by Delesley Hutchins.
llvm-svn: 152169
NSNumber, and boolean literals. This includes both Sema and Codegen support.
Included is also support for new Objective-C container subscripting.
My apologies for the large patch. It was very difficult to break apart.
The patch introduces changes to the driver as well to cause clang to link
in additional runtime support when needed to support the new language features.
Docs are forthcoming to document the implementation and behavior of these features.
llvm-svn: 152137
grammar requires a string-literal and not a user-defined-string-literal. The
two constructs are still represented by the same TokenKind, in order to prevent
a combinatorial explosion of different kinds of token. A flag on Token tracks
whether a ud-suffix is present, in order to prevent clients from needing to look
at the token's spelling.
llvm-svn: 152098