With this we complete the transition out of special output sections,
and with the previous patches it should be possible to merge
OutputSectionBase and OuputSection.
llvm-svn: 296023
With the current design an InputSection is basically anything that
goes directly in a OutputSection. That includes plain input section
but also synthetic sections, so this should probably not be a
template.
llvm-svn: 295993
Previously, space in a BSS section for copy relocations are reserved
in a special way. We directly manipulated size of the BSS section.
r294577 changed the way of doing it. Now, we create an instance of
CopyRelSection (which is a synthetic input section) for each copy
relocation.
This patch removes the remains of the old way and add CopyRelSections
to BSS sections using `addSections` function, which is the usual
way to add an input section to an output section.
llvm-svn: 295278
In the target dependent code we already always return a int64_t. In
the target independent code we carefully use uintX_t, which has the
same result given 2 complement rules.
This just simplifies the code to use int64_t everywhere.
llvm-svn: 295263
Much of the code in PltSection and IPltSection is similar, we identify
the IPlt by a HeaderSize of 0 and alter our behaviour in the member
functions appropriately:
-Iplt does not have a header
-Iplt always follows after the Plt
Differential Revision: https://reviews.llvm.org/D29664
llvm-svn: 294579
When we need a copy relocation we create a synthetic SHT_NOBITS
section that contains the right amount of ZI and assign it to either
.bss or .rel.ro.bss as appropriate. This allows the dynamic relocation
to be placed on the InputSection, removing the last case where a
dynamic relocation is stored as an offset from the OutputSection. This
has the side effect that we can run assignOffsets() after scanRelocs()
without losing the additional ZI needed for the copy relocations.
Differential Revision: https://reviews.llvm.org/D29637
llvm-svn: 294577
With a synthetic merge section we can have, for example, a single
.rodata section with stings, fixed sized constants and non merge
constants.
I can be simplified further by not setting Entsize, but that is
probably better done is a followup patch.
This should allow some cleanup in the linker script code now that
every output section command maps to just one output section.
llvm-svn: 294005
Thunks are now implemented by redirecting the relocation to the
symbol S, to a symbol TS in a Thunk. The Thunk will transfer control
to S. This has the following implications:
- All the side-effects of Thunks happen within createThunks()
- Thunks are no longer stored in InputSections and Symbols no longer
need to hold a pointer to a Thunk
- The synthetic Thunk sections need to be merged into OutputSections
This implementation is almost a direct conversion of the existing
Thunks with the following exceptions:
- Mips LA25 Thunks are placed before the InputSection that defines
the symbol that needs a Thunk.
- All ARM Thunks are placed at the end of the OutputSection of the
first caller to the Thunk.
Range extension Thunks are not supported yet so it is optimistically
assumed that all Thunks can be reused.
This is a recommit of r293283 with a fixed comparison predicate as
std::merge requires a strict weak ordering.
Differential revision: https://reviews.llvm.org/D29327
llvm-svn: 293757
Thunks are now implemented by redirecting the relocation to the
symbol S, to a symbol TS in a Thunk. The Thunk will transfer control
to S. This has the following implications:
- All the side-effects of Thunks happen within createThunks()
- Thunks are no longer stored in InputSections and Symbols no longer
need to hold a pointer to a Thunk
- The synthetic Thunk sections need to be merged into OutputSections
This implementation is almost a direct conversion of the existing
Thunks with the following exceptions:
- Mips LA25 Thunks are placed before the InputSection that defines
the symbol that needs a Thunk.
- All ARM Thunks are placed at the end of the OutputSection of the
first caller to the Thunk.
Range extension Thunks are not supported yet so it is optimistically
assumed that all Thunks can be reused.
Differential Revision: https://reviews.llvm.org/D29129
llvm-svn: 293283
Mapping symbols allow a mapping symbol aware disassembler to
correctly disassemble the PLT when the code immediately prior to the
PLT is Thumb.
To implement this we add a function to add symbols with local
binding to be defined in SyntheticSymbols.
Differential Revision: https://reviews.llvm.org/D28956
llvm-svn: 293044
Previously we stored kept locals in a KeptLocalSyms arrays,
belonged to files.
Patch makes SymbolTableSection to store locals in Symbols member,
that already present and was used for globals.
SymbolTableSection already had NumLocals counter member, so change
itself is trivial.
That allows to simplify handling of -r,
Body::DynsymIndex is no more used as "symbol table index" for relocatable
output.
Change was suggested during review of D28773 and opens road for D28612.
Differential revision: https://reviews.llvm.org/D29021
llvm-svn: 292789
Found that during attempts of linking linux kernel,
previously we partially duplicated code from getOutputSection(),
and it missed commons symbol case.
Differential revision: https://reviews.llvm.org/D28903
llvm-svn: 292594
Patch continues work started in D24706 and D25821.
in this patch symbol table and constant pool areas were
added to .gdb_index section output.
This one finishes the implementation of --gdb-index functionality in LLD.
Differential revision: https://reviews.llvm.org/D26283
llvm-svn: 289810
Patch continues work started in D24706,
in this patch address area was added to .gdb_index section output.
Differential revision: https://reviews.llvm.org/D25821
llvm-svn: 289790
The eglibc library, as used by Ubuntu 14.04 requires the presence of an
SHT_ARM_ATTRIBUTES section in for the purposes of checking hard/soft float
compatibility when dlopen() is used. Unfortunately when the section is not
present dlopen() fails with a generic could not find file message.
This change makes lld keep the first .ARM.attributes section that it
encounters and propagates it to the output. This is not a complete
SHT_ARM_ATTRIBUTES implementation, that would involve reading the contents
of the section and joining each individual attribute. It should suffice
for a homogenous build all libraries and executables on the same system
with a compatible set of command line options.
Differential revision: https://reviews.llvm.org/D27718
llvm-svn: 289642
The VA of _gp was being truncated to 32 bits when calling getVa(), but
for 64bit MIPS we need to write a 64 bit value to .MIPS.options.
Patch by Alexander Richardson.
Differential revision: https://reviews.llvm.org/D27672
llvm-svn: 289432
This change introduces new synthetic sections IpltSection, IgotPltSection
that represent the ifunc entries that would previously have been put in
the PltSection and the GotPltSection. The separation makes sure that
the R_*_IRELATIVE relocations are placed after the non R_*_IRELATIVE
relocations, which permits ifunc resolvers to know that the .got.plt
slots will be initialized prior to the resolver being called.
A secondary benefit is that for ARM we can move the IgotPltSection and its
dynamic relocations to the .got and .rel.dyn as the ARM glibc expects all
the R_*_IRELATIVE relocations to be in the .rel.dyn
Differential revision: https://reviews.llvm.org/D27406
llvm-svn: 289045
This change continues what was started by D27040
Now all allocatable synthetics should be available from script side.
Differential revision: https://reviews.llvm.org/D27131
llvm-svn: 288150
The MipsGotSection::getPageEntryOffset calculates index of GOT entry
with a "page" address. Previously this method changes the state
of MipsGotSection because it modifies PageIndexMap field. That leads
to the unpredictable results if getPageEntryOffset called from multiple threads.
The patch makes getPageEntryOffset constant. To do so it calculates GOT
entry index but does not update PageIndexMap field. Later in the
MipsGotSection::writeTo method linker calculates "page" addresses and
writes them to the output.
llvm-svn: 288129
Right now we just remember a SymbolBody for each got entry and
duplicate a bit of logic to decide what value, if any, should be
written for that SymbolBody.
With ARM there will be more complicated values, and it seems better to
just use the relocation code to fill the got entries. This makes it
clear that each entry is filled by the dynamic linker or by the static
linker.
llvm-svn: 288107
This is important for cases like:
.sdata : {
*(.got.plt .got)
...
}
That was not supported before as there was no way to get access to
synthetic sections from script.
More details on review page.
Differential revision: https://reviews.llvm.org/D27040
llvm-svn: 287913
The .ARM.exidx table has an entry for each function with the first entry
giving the start address of the function, the table is sorted in ascending
order of function address. Given a PC value, the unwinder will search the
table for the entry that contains the PC value.
If the table entry happens to be the last, the range of the addresses that
the final unwinding table describes will extend to the end of the address
space. To prevent an incorrect address outside the address range of the
program matching the last entry we follow ld.bfd's example and add a
sentinel EXIDX_CANTUNWIND entry at the end of the table. This gives the
final real table entry an upper bound.
In addition the llvm libunwind unwinder currently depends on the presence
of a sentinel entry (PR31091).
Differential revision: https://reviews.llvm.org/D26977
llvm-svn: 287869
Offset between beginning of a .got section and _gp symbols used in MIPS
GOT relocations calculations. Usually the expression looks like
VA + Offset - GP, where VA is the .got section address, Offset - offset
of the GOT entry, GP - offset between .got and _gp. Also there two "magic"
symbols _gp_disp and __gnu_local_gp which hold the offset mentioned above.
These symbols might be referenced by MIPS relocations.
Now the linker always defines _gp symbol and uses hardcoded value for
its initialization. So offset between .got and _gp is 0x7ff0. The _gp_disp
and __gnu_local_gp defined if required and initialized by 0x7ff0.
In fact that is not correct because _gp symbol might be defined by a linker
script and holds arbitrary value. In that case we need to use this value
in relocation calculation and initialize _gp_disp and __gnu_local_gp
properly.
The patch fixes the problem and completes fixing the bug #30311.
https://llvm.org/bugs/show_bug.cgi?id=30311
Differential revision: https://reviews.llvm.org/D27036
llvm-svn: 287832
Some synthetic sections are not derived calsses of SyntehticSection.
They are derived directly from InputSection. For consistencly, we should
use SyntheticSection.
llvm-svn: 287606
MIPS GOT handling is very different from other targets so it is better
to keep the code in the separatre section class MipsGotSection. This
patch introduces the new section and moves all MIPS specific code from
GotSection to the new class. I did not rename fields and methods in the
MipsGotSection class to reduce the diff and plan to do that by the
separate commit.
Differential revision: https://reviews.llvm.org/D26733
llvm-svn: 287150
This patch introduces the following changes:
- DynamicSection now inherits InputSection<ELFT> and was moved
to SyntheticSections.h/.cpp.
- Link and Entsize fields of DynamicSection are propagated to
its output section
- In<ELFT>::SyntheticSections was removed.
- Finalization of synthetic sections was removed from
OutputSection<ELFT>::finalize. Now finalizeSyntheticSections is
used instead.
Differential revision: https://reviews.llvm.org/D26603
llvm-svn: 286950
Summary:
This patch adds a ".comment" section to an output. The comment
section contains the linker's version string. You can now
find out whether a binary is created by LLD or not using objdump
command like this.
$ objdump -s -j .comment foo
foo: file format elf64-x86-64
Contents of section .comment:
0000 00474343 3a202855 62756e74 7520342e .GCC: (Ubuntu 4.
0010 382e342d 32756275 6e747531 7e31342e 8.4-2ubuntu1~14.
...
00c0 766d2f74 72756e6b 20323835 38343629 vm/trunk 285846)
00d0 004c696e 6b65723a 204c4c44 20342e30 .Linker: LLD 4.0
00e0 2e302028 7472756e 6b203238 36343036 .0 (trunk 286406
00f0 2900 ).
Compilers emits .comment section as well, so the output contains
both compiler and linker information.
Alternative considered:
I first tried to add a SHT_NOTE section because GNU gold does that.
A NOTE section starts with a header which contains content type.
It turned out that ld.gold sets type NT_GNU_GOLD_VERSION to their
NOTE section. So the NOTE type is only for GNU gold (surprise!)
Next, I tried to create ".linker-version" section. However, it seems
that reusing the existing ".comment" section is better because 1)
other tools already know about .comment section and is able to strip
it and 2) the result contans not only linker info but also compiler
info.
Differential Revision: https://reviews.llvm.org/D26487
llvm-svn: 286496
Previously, we have both input and output section for .MIPS.abiflags.
Now we have only one class for .MIPS.abiflags, which is MipsAbiFlagsSection.
This class is a synthetic input section.
.MIPS.abiflags sections are handled as regular sections until
the control reaches Writer. Writer then aggregates all sections
whose type is SHT_MIPS_ABIFLAGS to create a single synthesized
input section. The synthesized section is then processed normally
as if it came from an input file.
llvm-svn: 286398
Previously, we have both input and output sections for .reginfo and
.MIPS.options. Now for each such sections we have one synthetic input
sections: MipsReginfoSection and MipsOptionsSection respectively.
Both sections are handled as regular sections until the control reaches
Writer. Writer then aggregates all sections whose type is SHT_MIPS_REGINFO
or SHT_MIPS_OPTIONS to create a single synthesized input section. In that
moment Writer also save GP0 value to the MipsGp0 field of the corresponding
ObjectFile. This value required for R_MIPS_GPREL16 and R_MIPS_GPREL32
relocations calculation.
Differential revision: https://reviews.llvm.org/D26444
llvm-svn: 286397
Patch switches computing of --build-id hash to tree.
This is the way when input data is splitted by chunks,
hash is computed for each one in threaded/non-threaded way.
At the end hash is conputed for result tree.
With or without -threads the result hash is the same.
Differential revision: https://reviews.llvm.org/D26199
llvm-svn: 286061
A CommonInputSection is a section containing all common symbols.
That was an input section but was abstracted in a different way
than the synthetic input sections because it was written before
the synthetic input section was invented.
This patch rewrites CommonInputSection as a synthetic input section
so that it behaves better with other sections.
llvm-svn: 286053
We are going to have many more classes for linker-synthesized
input sections, so it's worth to be added to a separate file
than to the file for regular input sections.
llvm-svn: 285740
Rui Ueyama