On some architectures such as Arm and X86 the encoding for a nop may
change depending on the subtarget in operation at the time of
encoding. This change replaces the per module MCSubtargetInfo retained
by the targets AsmBackend in favour of passing through the local
MCSubtargetInfo in operation at the time.
On Arm using the architectural NOP instruction can have a performance
benefit on some implementations.
For Arm I've deleted the copy of the AsmBackend's MCSubtargetInfo to
limit the chances of this causing problems in the future. I've not
done this for other targets such as X86 as there is more frequent use
of the MCSubtargetInfo and it looks to be for stable properties that
we would not expect to vary per function.
This change required threading STI through MCNopsFragment and
MCBoundaryAlignFragment.
I've attempted to take into account the in tree experimental backends.
Differential Revision: https://reviews.llvm.org/D45962
In preparation for passing the MCSubtargetInfo (STI) through to writeNops
so that it can use the STI in operation at the time, we need to record the
STI in operation when a MCAlignFragment may write nops as padding. The
STI is currently unused, a further patch will pass it through to
writeNops.
There are many places that can create an MCAlignFragment, in most cases
we can find out the STI in operation at the time. In a few places this
isn't possible as we are in initialisation or finalisation, or are
emitting constant pools. When possible I've tried to find the most
appropriate existing fragment to obtain the STI from, when none is
available use the per module STI.
For constant pools we don't actually need to use EmitCodeAlign as the
constant pools are data anyway so falling through into it via an
executable NOP is no better than falling through into data padding.
This is a prerequisite for D45962 which uses the STI to emit the
appropriate NOP for the STI. Which can differ per fragment.
Note that involves an interface change to InitSections. It is now
called initSections and requires a SubtargetInfo as a parameter.
Differential Revision: https://reviews.llvm.org/D45961
Previously we would emit constant pool entries for ldr inline asm at the
very end of AsmPrinter::doFinalization(). However, if we're emitting
dwarf aranges, that would end all sections with aranges. Then if we have
constant pool entries to be emitted in those same sections, we'd hit an
assert that the section has already been ended.
We want to emit constant pool entries before emitting dwarf aranges.
This patch splits out arm32/64's constant pool entry emission into its
own MCTargetStreamer virtual method.
Fixes PR51208
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D107314
This untangles the MCContext and the MCObjectFileInfo. There is a circular
dependency between MCContext and MCObjectFileInfo. Currently this dependency
also exists during construction: You can't contruct a MOFI without a MCContext
without constructing the MCContext with a dummy version of that MOFI first.
This removes this dependency during construction. In a perfect world,
MCObjectFileInfo wouldn't depend on MCContext at all, but only be stored in the
MCContext, like other MC information. This is future work.
This also shifts/adds more information to the MCContext making it more
available to the different targets. Namely:
- TargetTriple
- ObjectFileType
- SubtargetInfo
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101462
A symbol being redefined as a label is something that can happen as a result of
ordinary input, so it shouldn't cause a fatal error. Also adjust the error
message to match the one you get when a symbol is redefined as a variable.
Differential Revision: https://reviews.llvm.org/D98181
As a resolution to https://sourceware.org/bugzilla/show_bug.cgi?id=25295 , GNU as
from binutils 2.35 supports the optional third argument for the .symver directive.
'remove' for a non-default version is useful:
`.symver def_v1, def@v1, remove` => def_v1 is not retained in the symbol table.
Previously the user has to strip the original symbol or specify a `local:`
version node in a version script to localize the symbol.
`.symver def, def@@v1, remove` and `.symver def, def@@@v1, remove` are supported
as well, though they are identical to `.symver def, def@@@v1`.
local/hidden are not useful so this patch does not implement them.
GNU as supports this. This mode silently ignores
.cfi_startproc/.cfi_endproc and .cfi_* in between.
Also drop a diagnostic `in '.cfi_sections' directive`: the diagnostic
already includes the line and it is clear the line is a `.cfi_sections` directive.
remove `Hi` `Lo` argument from `emitDwarfUnitLength`, so we
can make caller of emitDwarfUnitLength easier.
Reviewed By: MaskRay, dblaikie, ikudrin
Differential Revision: https://reviews.llvm.org/D96409
We may need to do some customization for DWARF unit length in DWARF
section headers for some targets for some code generation path.
For example, for XCOFF in assembly path, AIX assembler does not require
the debug section containing its debug unit length in the header.
Move emitDwarfUnitLength to MCStreamer class so that we can do
customization in different Streamers
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D95932
CanBeUnnamed is rarely false. Splitting to a createNamedTempSymbol makes the
intention clearer and matches the direction of reverted r240130 (to drop the
unneeded parameters).
No behavior change.
This change implements pseudo probe encoding and emission for CSSPGO. Please see RFC here for more context: https://groups.google.com/g/llvm-dev/c/1p1rdYbL93s
Pseudo probes are in the form of intrinsic calls on IR/MIR but they do not turn into any machine instructions. Instead they are emitted into the binary as a piece of data in standalone sections. The probe-specific sections are not needed to be loaded into memory at execution time, thus they do not incur a runtime overhead.
**ELF object emission**
The binary data to emit are organized as two ELF sections, i.e, the `.pseudo_probe_desc` section and the `.pseudo_probe` section. The `.pseudo_probe_desc` section stores a function descriptor for each function and the `.pseudo_probe` section stores the actual probes, each fo which corresponds to an IR basic block or an IR function callsite. A function descriptor is stored as a module-level metadata during the compilation and is serialized into the object file during object emission.
Both the probe descriptors and pseudo probes can be emitted into a separate ELF section per function to leverage the linker for deduplication. A `.pseudo_probe` section shares the same COMDAT group with the function code so that when the function is dead, the probes are dead and disposed too. On the contrary, a `.pseudo_probe_desc` section has its own COMDAT group. This is because even if a function is dead, its probes may be inlined into other functions and its descriptor is still needed by the profile generation tool.
The format of `.pseudo_probe_desc` section looks like:
```
.section .pseudo_probe_desc,"",@progbits
.quad 6309742469962978389 // Func GUID
.quad 4294967295 // Func Hash
.byte 9 // Length of func name
.ascii "_Z5funcAi" // Func name
.quad 7102633082150537521
.quad 138828622701
.byte 12
.ascii "_Z8funcLeafi"
.quad 446061515086924981
.quad 4294967295
.byte 9
.ascii "_Z5funcBi"
.quad -2016976694713209516
.quad 72617220756
.byte 7
.ascii "_Z3fibi"
```
For each `.pseudoprobe` section, the encoded binary data consists of a single function record corresponding to an outlined function (i.e, a function with a code entry in the `.text` section). A function record has the following format :
```
FUNCTION BODY (one for each outlined function present in the text section)
GUID (uint64)
GUID of the function
NPROBES (ULEB128)
Number of probes originating from this function.
NUM_INLINED_FUNCTIONS (ULEB128)
Number of callees inlined into this function, aka number of
first-level inlinees
PROBE RECORDS
A list of NPROBES entries. Each entry contains:
INDEX (ULEB128)
TYPE (uint4)
0 - block probe, 1 - indirect call, 2 - direct call
ATTRIBUTE (uint3)
reserved
ADDRESS_TYPE (uint1)
0 - code address, 1 - address delta
CODE_ADDRESS (uint64 or ULEB128)
code address or address delta, depending on ADDRESS_TYPE
INLINED FUNCTION RECORDS
A list of NUM_INLINED_FUNCTIONS entries describing each of the inlined
callees. Each record contains:
INLINE SITE
GUID of the inlinee (uint64)
ID of the callsite probe (ULEB128)
FUNCTION BODY
A FUNCTION BODY entry describing the inlined function.
```
To support building a context-sensitive profile, probes from inlinees are grouped by their inline contexts. An inline context is logically a call path through which a callee function lands in a caller function. The probe emitter builds an inline tree based on the debug metadata for each outlined function in the form of a trie tree. A tree root is the outlined function. Each tree edge stands for a callsite where inlining happens. Pseudo probes originating from an inlinee function are stored in a tree node and the tree path starting from the root all the way down to the tree node is the inline context of the probes. The emission happens on the whole tree top-down recursively. Probes of a tree node will be emitted altogether with their direct parent edge. Since a pseudo probe corresponds to a real code address, for size savings, the address is encoded as a delta from the previous probe except for the first probe. Variant-sized integer encoding, aka LEB128, is used for address delta and probe index.
**Assembling**
Pseudo probes can be printed as assembly directives alternatively. This allows for good assembly code readability and also provides a view of how optimizations and pseudo probes affect each other, especially helpful for diff time assembly analysis.
A pseudo probe directive has the following operands in order: function GUID, probe index, probe type, probe attributes and inline context. The directive is generated by the compiler and can be parsed by the assembler to form an encoded `.pseudoprobe` section in the object file.
A example assembly looks like:
```
foo2: # @foo2
# %bb.0: # %bb0
pushq %rax
testl %edi, %edi
.pseudoprobe 837061429793323041 1 0 0
je .LBB1_1
# %bb.2: # %bb2
.pseudoprobe 837061429793323041 6 2 0
callq foo
.pseudoprobe 837061429793323041 3 0 0
.pseudoprobe 837061429793323041 4 0 0
popq %rax
retq
.LBB1_1: # %bb1
.pseudoprobe 837061429793323041 5 1 0
callq *%rsi
.pseudoprobe 837061429793323041 2 0 0
.pseudoprobe 837061429793323041 4 0 0
popq %rax
retq
# -- End function
.section .pseudo_probe_desc,"",@progbits
.quad 6699318081062747564
.quad 72617220756
.byte 3
.ascii "foo"
.quad 837061429793323041
.quad 281547593931412
.byte 4
.ascii "foo2"
```
With inlining turned on, the assembly may look different around %bb2 with an inlined probe:
```
# %bb.2: # %bb2
.pseudoprobe 837061429793323041 3 0
.pseudoprobe 6699318081062747564 1 0 @ 837061429793323041:6
.pseudoprobe 837061429793323041 4 0
popq %rax
retq
```
**Disassembling**
We have a disassembling tool (llvm-profgen) that can display disassembly alongside with pseudo probes. So far it only supports ELF executable file.
An example disassembly looks like:
```
00000000002011a0 <foo2>:
2011a0: 50 push rax
2011a1: 85 ff test edi,edi
[Probe]: FUNC: foo2 Index: 1 Type: Block
2011a3: 74 02 je 2011a7 <foo2+0x7>
[Probe]: FUNC: foo2 Index: 3 Type: Block
[Probe]: FUNC: foo2 Index: 4 Type: Block
[Probe]: FUNC: foo Index: 1 Type: Block Inlined: @ foo2:6
2011a5: 58 pop rax
2011a6: c3 ret
[Probe]: FUNC: foo2 Index: 2 Type: Block
2011a7: bf 01 00 00 00 mov edi,0x1
[Probe]: FUNC: foo2 Index: 5 Type: IndirectCall
2011ac: ff d6 call rsi
[Probe]: FUNC: foo2 Index: 4 Type: Block
2011ae: 58 pop rax
2011af: c3 ret
```
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D91878
This change implements pseudo probe encoding and emission for CSSPGO. Please see RFC here for more context: https://groups.google.com/g/llvm-dev/c/1p1rdYbL93s
Pseudo probes are in the form of intrinsic calls on IR/MIR but they do not turn into any machine instructions. Instead they are emitted into the binary as a piece of data in standalone sections. The probe-specific sections are not needed to be loaded into memory at execution time, thus they do not incur a runtime overhead.
**ELF object emission**
The binary data to emit are organized as two ELF sections, i.e, the `.pseudo_probe_desc` section and the `.pseudo_probe` section. The `.pseudo_probe_desc` section stores a function descriptor for each function and the `.pseudo_probe` section stores the actual probes, each fo which corresponds to an IR basic block or an IR function callsite. A function descriptor is stored as a module-level metadata during the compilation and is serialized into the object file during object emission.
Both the probe descriptors and pseudo probes can be emitted into a separate ELF section per function to leverage the linker for deduplication. A `.pseudo_probe` section shares the same COMDAT group with the function code so that when the function is dead, the probes are dead and disposed too. On the contrary, a `.pseudo_probe_desc` section has its own COMDAT group. This is because even if a function is dead, its probes may be inlined into other functions and its descriptor is still needed by the profile generation tool.
The format of `.pseudo_probe_desc` section looks like:
```
.section .pseudo_probe_desc,"",@progbits
.quad 6309742469962978389 // Func GUID
.quad 4294967295 // Func Hash
.byte 9 // Length of func name
.ascii "_Z5funcAi" // Func name
.quad 7102633082150537521
.quad 138828622701
.byte 12
.ascii "_Z8funcLeafi"
.quad 446061515086924981
.quad 4294967295
.byte 9
.ascii "_Z5funcBi"
.quad -2016976694713209516
.quad 72617220756
.byte 7
.ascii "_Z3fibi"
```
For each `.pseudoprobe` section, the encoded binary data consists of a single function record corresponding to an outlined function (i.e, a function with a code entry in the `.text` section). A function record has the following format :
```
FUNCTION BODY (one for each outlined function present in the text section)
GUID (uint64)
GUID of the function
NPROBES (ULEB128)
Number of probes originating from this function.
NUM_INLINED_FUNCTIONS (ULEB128)
Number of callees inlined into this function, aka number of
first-level inlinees
PROBE RECORDS
A list of NPROBES entries. Each entry contains:
INDEX (ULEB128)
TYPE (uint4)
0 - block probe, 1 - indirect call, 2 - direct call
ATTRIBUTE (uint3)
reserved
ADDRESS_TYPE (uint1)
0 - code address, 1 - address delta
CODE_ADDRESS (uint64 or ULEB128)
code address or address delta, depending on ADDRESS_TYPE
INLINED FUNCTION RECORDS
A list of NUM_INLINED_FUNCTIONS entries describing each of the inlined
callees. Each record contains:
INLINE SITE
GUID of the inlinee (uint64)
ID of the callsite probe (ULEB128)
FUNCTION BODY
A FUNCTION BODY entry describing the inlined function.
```
To support building a context-sensitive profile, probes from inlinees are grouped by their inline contexts. An inline context is logically a call path through which a callee function lands in a caller function. The probe emitter builds an inline tree based on the debug metadata for each outlined function in the form of a trie tree. A tree root is the outlined function. Each tree edge stands for a callsite where inlining happens. Pseudo probes originating from an inlinee function are stored in a tree node and the tree path starting from the root all the way down to the tree node is the inline context of the probes. The emission happens on the whole tree top-down recursively. Probes of a tree node will be emitted altogether with their direct parent edge. Since a pseudo probe corresponds to a real code address, for size savings, the address is encoded as a delta from the previous probe except for the first probe. Variant-sized integer encoding, aka LEB128, is used for address delta and probe index.
**Assembling**
Pseudo probes can be printed as assembly directives alternatively. This allows for good assembly code readability and also provides a view of how optimizations and pseudo probes affect each other, especially helpful for diff time assembly analysis.
A pseudo probe directive has the following operands in order: function GUID, probe index, probe type, probe attributes and inline context. The directive is generated by the compiler and can be parsed by the assembler to form an encoded `.pseudoprobe` section in the object file.
A example assembly looks like:
```
foo2: # @foo2
# %bb.0: # %bb0
pushq %rax
testl %edi, %edi
.pseudoprobe 837061429793323041 1 0 0
je .LBB1_1
# %bb.2: # %bb2
.pseudoprobe 837061429793323041 6 2 0
callq foo
.pseudoprobe 837061429793323041 3 0 0
.pseudoprobe 837061429793323041 4 0 0
popq %rax
retq
.LBB1_1: # %bb1
.pseudoprobe 837061429793323041 5 1 0
callq *%rsi
.pseudoprobe 837061429793323041 2 0 0
.pseudoprobe 837061429793323041 4 0 0
popq %rax
retq
# -- End function
.section .pseudo_probe_desc,"",@progbits
.quad 6699318081062747564
.quad 72617220756
.byte 3
.ascii "foo"
.quad 837061429793323041
.quad 281547593931412
.byte 4
.ascii "foo2"
```
With inlining turned on, the assembly may look different around %bb2 with an inlined probe:
```
# %bb.2: # %bb2
.pseudoprobe 837061429793323041 3 0
.pseudoprobe 6699318081062747564 1 0 @ 837061429793323041:6
.pseudoprobe 837061429793323041 4 0
popq %rax
retq
```
**Disassembling**
We have a disassembling tool (llvm-profgen) that can display disassembly alongside with pseudo probes. So far it only supports ELF executable file.
An example disassembly looks like:
```
00000000002011a0 <foo2>:
2011a0: 50 push rax
2011a1: 85 ff test edi,edi
[Probe]: FUNC: foo2 Index: 1 Type: Block
2011a3: 74 02 je 2011a7 <foo2+0x7>
[Probe]: FUNC: foo2 Index: 3 Type: Block
[Probe]: FUNC: foo2 Index: 4 Type: Block
[Probe]: FUNC: foo Index: 1 Type: Block Inlined: @ foo2:6
2011a5: 58 pop rax
2011a6: c3 ret
[Probe]: FUNC: foo2 Index: 2 Type: Block
2011a7: bf 01 00 00 00 mov edi,0x1
[Probe]: FUNC: foo2 Index: 5 Type: IndirectCall
2011ac: ff d6 call rsi
[Probe]: FUNC: foo2 Index: 4 Type: Block
2011ae: 58 pop rax
2011af: c3 ret
```
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D91878
This reapplies 36c64af9d7 in updated
form.
Emit the xdata for each function at .seh_endproc. This keeps the
exact same output header order for most code generated by the LLVM
CodeGen layer. (Sections still change order for code built from
assembly where functions lack an explicit .seh_handlerdata
directive, and functions with chained unwind info.)
The practical effect should be that assembly output lacks
superfluous ".seh_handlerdata; .text" pairs at the end of functions
that don't handle exceptions, which allows such functions to use
the AArch64 packed unwind format again.
Differential Revision: https://reviews.llvm.org/D87448
I was trying to add .cfi_ annotations to assembly code in the FreeBSD
kernel and changed a macro that then resulted in incorrectly nested
directives. However, clang's diagnostics said the error was happening at
<unknown>:0. This addresses one of the TODOs added in D51695.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D89787
This can happen e.g. for code that declare .seh_proc/.seh_endproc
in assembly, or for code that use .seh_handlerdata (which triggers
the unwind info to be emitted before the end of the function).
The TextSection field must be made non-const to be able to use it
with Streamer.SwitchSection().
Differential Revision: https://reviews.llvm.org/D86528
Summary:
When a desired symbol name contains invalid character that the
system assembler could not process, we need to emit .rename
directive in assembly path in order for that desired symbol name
to appear in the symbol table.
Reviewed By: hubert.reinterpretcast, DiggerLin, daltenty, Xiangling_L
Differential Revision: https://reviews.llvm.org/D82481
This change lets LLVM use the LC_BUILD_VERSION command when building for macOS 10.14, iOS 12, tvOS 12, and watchOS 5.
Additionally, this change ensures that new platforms like Apple Silicon macOS / Mac Catalyst,
and simulators running on Apple Silicon alway use LC_BUILD_VERSION with the OS version set to the
minimum supported OS version if the deployment target version is older.
Differential Revision: https://reviews.llvm.org/D82836
SUMMARY:
in the aix assembly , it do not have .hidden and .protected directive.
in current llvm. if a function or a variable which has visibility attribute, it will generate something like the .hidden or .protected , it can not recognize by aix as.
in aix assembly, the visibility attribute are support in the pseudo-op like
.extern Name [ , Visibility ]
.globl Name [, Visibility ]
.weak Name [, Visibility ]
in this patch, we implement the visibility attribute for the global variable, function or extern function .
for example.
extern __attribute__ ((visibility ("hidden"))) int
bar(int* ip);
__attribute__ ((visibility ("hidden"))) int b = 0;
__attribute__ ((visibility ("hidden"))) int
foo(int* ip){
return (*ip)++;
}
the visibility of .comm linkage do not support , we will have a separate patch for it.
we have the unsupported cases ("default" and "internal") , we will implement them in a a separate patch for it.
Reviewers: Jason Liu ,hubert.reinterpretcast,James Henderson
Differential Revision: https://reviews.llvm.org/D75866
Negations are incorrectly added in numerous places and the code just happens to work.
Also fix a missed DW_CFA_def_cfa_offset negation in c693b9c321d5a40d012340619674cf790c9ac86c:
ARMAsmBackendDarwin::generateCompactUnwindEncoding
printInst prints a branch/call instruction as `b offset` (there are many
variants on various targets) instead of `b address`.
It is a convention to use address instead of offset in most external
symbolizers/disassemblers. This difference makes `llvm-objdump -d`
output unsatisfactory.
Add `uint64_t Address` to printInst(), so that it can pass the argument to
printInstruction(). `raw_ostream &OS` is moved to the last to be
consistent with other print* methods.
The next step is to pass `Address` to printInstruction() (generated by
tablegen from the instruction set description). We can gradually migrate
targets to print addresses instead of offsets.
In any case, downstream projects which don't know `Address` can pass 0 as
the argument.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D72172
Summary:
We are using symbols to represent label and csect interchangeably before, and that could be a problem.
There are cases we would need to add storage mapping class to the symbol if that symbol is actually the name of a csect, but it's hard for us to figure out whether that symbol is a label or csect.
This patch intend to do the following:
1. Construct a QualName (A name include the storage mapping class)
MCSymbolXCOFF for every MCSectionXCOFF.
2. Keep a pointer to that QualName inside of MCSectionXCOFF.
3. Use that QualName whenever we need a symbol refers to that
MCSectionXCOFF.
4. Adapt the snowball effect from the above changes in
XCOFFObjectWriter.cpp.
Reviewers: xingxue, DiggerLin, sfertile, daltenty, hubert.reinterpretcast
Reviewed By: DiggerLin, daltenty
Subscribers: wuzish, nemanjai, mgorny, hiraditya, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69633
Also improve assembler parser register validation for .seh_ directives.
This requires moving X86-specific seh directive handling into the x86
backend, which addresses some assembler FIXMEs.
Differential Revision: https://reviews.llvm.org/D66625
llvm-svn: 370533
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Summary:
This patch enable assembly output of local commons for AIX using .lcomm
directives. Adds a EmitXCOFFLocalCommonSymbol to MCStreamer so we can emit the
AIX version of .lcomm assembly directives which include a csect name. Handle the
case of BSS locals in PPCAIXAsmPrinter by using EmitXCOFFLocalCommonSymbol. Adds
a test for generating .lcomm on AIX Targets.
Reviewers: cebowleratibm, hubert.reinterpretcast, Xiangling_L, jasonliu, sfertile
Reviewed By: sfertile
Subscribers: wuzish, nemanjai, hiraditya, kbarton, MaskRay, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64825
llvm-svn: 368306
Mac Catalyst is a new MachO platform in macOS Catalina.
It always uses the build_version MachO load command.
Differential Revision: https://reviews.llvm.org/D64107
llvm-svn: 364981
the MCDwarf.h include.
This removes 50 transitive dependencies for a modification of
MCDwarf.h in a build of llc for a pair of out of line functions
and reduces the build overhead of 'touch MCDwarf.h" by 15% without
impacting test time of check-llvm.
llvm-svn: 358264
Peter Smith