Instead of using TARGET_TRIPLE, which is always set to LLVM_DEFAULT_TARGET_TRIPLE,
use that variable directly to populate the various XXXX_TARGET_TRIPLE
variables in the runtimes.
This re-applies 77396bbc98 and 5099e01568, which were reverted in
850b57c5fb because they broke the build.
Differential Revision: https://reviews.llvm.org/D106009
When a target triple is specified in CMake via XXX_TARGET_TRIPLE, we tried
passing the --target=<...> flag to the compiler. However, not all compilers
support that flag (e.g. GCC, which is not a cross-compiler). As a result,
setting e.g. LIBCXX_TARGET_TRIPLE=<host-triple> would end up trying to
pass --target=<host-triple> to GCC, which breaks everything because the
flag isn't even supported.
This commit only adds `--target=<...>` & friends to the flags if it is
supported by the compiler.
One could argue that it's confusing to pass LIBCXX_TARGET_TRIPLE=<...>
and have it be ignored. That's correct, and one possibility would be
to assert that the requested triple is the same as the host triple when
we know the compiler is unable to cross-compile. However, note that this
is a pre-existing issue (setting the TARGET_TRIPLE variable never had an
influence on the flags passed to the compiler), and also fixing that is
starting to look like reimplementing a lot of CMake logic that is already
handled with CMAKE_CXX_COMPILER_TARGET.
Differential Revision: https://reviews.llvm.org/D106082
This commit reverts 5099e01568 and 77396bbc98, which broke the build
in various ways. I'm reverting until I can investigate, since that
change appears to be way more subtle than it seemed.
This is a second attempt at D101497, which landed as
9a9bc76c0e but had to be reverted in
8cf7ddbdd4.
This issue was that in the case that `COMPILER_RT_INSTALL_PATH` is
empty, expressions like "${COMPILER_RT_INSTALL_PATH}/bin" evaluated to
"/bin" not "bin" as intended and as was originally.
One solution is to make `COMPILER_RT_INSTALL_PATH` always non-empty,
defaulting it to `CMAKE_INSTALL_PREFIX`. D99636 adopted that approach.
But, I think it is more ergonomic to allow those project-specific paths
to be relative the global ones. Also, making install paths absolute by
default inhibits the proper behavior of functions like
`GNUInstallDirs_get_absolute_install_dir` which make relative install
paths absolute in a more complicated way.
Given all this, I will define a function like the one asked for in
https://gitlab.kitware.com/cmake/cmake/-/issues/19568 (and needed for a
similar use-case).
---
Original message:
Instead of using `COMPILER_RT_INSTALL_PATH` through the CMake for
complier-rt, just use it to define variables for the subdirs which
themselves are used.
This preserves compatibility, but later on we might consider getting rid
of `COMPILER_RT_INSTALL_PATH` and just changing the defaults for the
subdir variables directly.
---
There was a seaming bug where the (non-Apple) per-target libdir was
`${target}` not `lib/${target}`. I suspect that has to do with the docs
on `COMPILER_RT_INSTALL_PATH` saying was the library dir when that's no
longer true, so I just went ahead and fixed it, allowing me to define
fewer and more sensible variables.
That last part should be the only behavior changes; everything else
should be a pure refactoring.
---
I added some documentation of these variables too. In particular, I
wanted to highlight the gotcha where `-DSomeCachePath=...` without the
`:PATH` will lead CMake to make the path absolute. See [1] for
discussion of the problem, and [2] for the brief official documentation
they added as a result.
[1]: https://cmake.org/pipermail/cmake/2015-March/060204.html
[2]: https://cmake.org/cmake/help/latest/manual/cmake.1.html#options
In 38b2dec37e the problem was somewhat
misidentified and so `:STRING` was used, but `:PATH` is better as it
sets the correct type from the get-go.
---
D99484 is the main thrust of the `GnuInstallDirs` work. Once this lands,
it should be feasible to follow both of these up with a simple patch for
compiler-rt analogous to the one for libcxx.
Reviewed By: phosek, #libc_abi, #libunwind
Differential Revision: https://reviews.llvm.org/D105765
Instead, people should be using CMAKE_POSITION_INDEPENDENT_CODE to control
whether they want to use PIC or not. We should try to avoid reinventing
the wheel whenever CMake natively supports something.
This makes libc++abi consistent with libc++ and libunwind.
Differential Revision: https://reviews.llvm.org/D103973
Now that we're passing -D_LIBCPP_BUILDING_LIBRARY to the libc++abi
build, -D_LIBCPP_ENABLE_CXX17_REMOVED_UNEXPECTED_FUNCTIONS is redundant
(fb3a00c327/libcxx/include/exception (L120-L121)
is the only use of _LIBCPP_ENABLE_CXX17_REMOVED_UNEXPECTED_FUNCTIONS in
libc++, and that conditional also checks for _LIBCPP_BUILDING_LIBRARY).
Reviewed By: #libc_abi, phosek
Differential Revision: https://reviews.llvm.org/D102372
The new layout more closely matches the layout used by other compilers.
This is only used when LLVM_ENABLE_PER_TARGET_RUNTIME_DIR is enabled.
Differential Revision: https://reviews.llvm.org/D100869
These variables were introduced during early work on the runtimes build
but were obsoleted by {LIBCXX,LIBCXXABI,LIBUNWIND}_INSTALL_LIBRARY_DIR.
Differential Revision: https://reviews.llvm.org/D99697
A few files in libc++abi make use of libc++ headers and a few of those use threading primitives provided by libc++. Since libc++ has multiple threading APIs it may be necessary to override auto-detection.
This patch adds the LIBCXXABI_HAS_WIN32_THREAD_API which does roughly the same as LIBCXXABI_HAS_PTHREAD_API and the similarly named LIBCXX_HAS_WIN32_THREAD_API from libc++. Instead of using autodetection it will force the use of win32 threads instead of pthreads in headers included from libc++.
Without this patch, libc++abi may depend on pthreads if present on the users build environment, even if win32 threading was selected for libc++.
Differential revision: https://reviews.llvm.org/D98021
We've been using this patch in Android so we can avoid including the
demangler in libc++.so. It comes with a rather large cost in RSS and
isn't commonly needed.
Reviewed By: #libc_abi, compnerd
Differential Revision: https://reviews.llvm.org/D88189
cmake_minimum_required(VERSION) calls cmake_policy(VERSION),
which sets all policies up to VERSION to NEW.
LLVM started requiring CMake 3.13 last year, so we can remove
a bunch of code setting policies prior to 3.13 to NEW as it
no longer has any effect.
Reviewed By: phosek, #libunwind, #libc, #libc_abi, ldionne
Differential Revision: https://reviews.llvm.org/D94374
Previously, these had to be set manually when building each of the
projects standalone, in order to get proper symbol visibility when
combining the two libraries.
Differential Revision: https://reviews.llvm.org/D90021
This is a massive revert of the following commits (from most revent to oldest):
2b9b7b5775.
529ac3319728270234f169c2087283b5aa67446e5d796645d6
After checking-in the __config_site change, a lot of things started breaking
due to widespread reliance on various aspects of libc++'s build, notably the
fact that we can include the headers from the source tree, but also reliance
on various "internal" CMake variables used by the runtimes build and compiler-rt.
These were unintended consequences of the change, and after two days, we
still haven't restored all the bots to being green. Instead, now that I
understand what specific areas this will blow up in, I should be able to
chop up the patch into smaller ones that are easier to digest.
See https://reviews.llvm.org/D89041 for more details on this adventure.
In 5d796645, we stopped looking at the LIBCXXABI_LIBCXX_INCLUDES variable,
which broke users of the Standalone build. This patch reinstates that
variable, however it must point to the *installed* path of the libc++
headers, not the libc++ headers in the source tree (which has always
been the case, but wasn't enforced before).
If LIBCXXABI_LIBCXX_INCLUDES points to the libc++ headers in the source
tree, the `__config_site` header will fail to be found.
Prior to this patch, we would generate a fancy <__config> header by
concatenating <__config_site> and <__config>. This complexifies the
build system and also increases the difference between what's tested
and what's actually installed.
This patch removes that complexity and instead simply installs <__config_site>
alongside the libc++ headers. <__config_site> is then included by <__config>,
which is much simpler. Doing this also opens the door to having different
<__config_site> headers depending on the target, which was impossible before.
It does change the workflow for testing header-only changes to libc++.
Previously, we would run `lit` against the headers in libcxx/include.
After this patch, we run it against a fake installation root of the
headers (containing a proper <__config_site> header). This makes use
closer to testing what we actually install, which is good, however it
does mean that we have to update that root before testing header changes.
Thus, we now need to run `ninja check-cxx-deps` before running `lit` by
hand.
This commit was originally applied in 1e46d1aa3 and reverted in eb60c487
because it broke the libc++abi and libunwind test suites. This has now
been fixed.
Differential Revision: https://reviews.llvm.org/D89041
This patch ensures that __shared_weak_count provides a consistent vtable
regardless of if RTTI is enabled or if we are targeting a static or shared
libc++ build.
This patch is technically ABI breaking, but only for a very specific
configuration that no vendor should be shipping.
Note that _LIBCPP_BUILD_STATIC is not normally defined when building
libc++.a, but instead it must be manually provided by the user or the
__config_site.
Differential Revision: https://reviews.llvm.org/D32838
Previously, we would define new/delete in both libc++ and libc++abi.
Not only does this cause code bloat, but also it's technically an ODR
violation since we don't know which operator will be selected. Furthermore,
since those are weak definitions, we should strive to have as few of them
as possible (to improve load times).
My preferred choice would have been to put the operators in libc++ only
by default, however that would create a circular dependency between
libc++ and libc++abi, which GNU linkers don't handle.
Folks who want to ship new/delete in libc++ instead of libc++abi are
free to do so by turning on LIBCXX_ENABLE_NEW_DELETE_DEFINITIONS at
CMake configure time.
On Apple platforms, this shouldn't be an ABI break because we re-export
the new/delete symbols from libc++abi. This change actually makes libc++
behave closer to the system libc++ shipped on Apple platforms.
On other platforms, this is an ABI break for people linking against libc++
but not libc++abi. However, vendors have been consulted in D68269 and no
objection was raised. Furthermore, the definitions can be controlled to
appear in libc++ instead with the CMake option.
Differential Revision: https://reviews.llvm.org/D68269
Remove check for standalone and shared library mode in libcxxabi to
allow including tests in said mode. This check prevented running the
tests in standalone mode with static libraries, which is the case for
baremetal targets.
Fix check-unwind target trying to use a non-existent llvm-lit executable
in standalone mode. Copy the HandleOutOfTreeLLVM logic from libcxxabi to
libunwind in order to make the tests work in standalone mode.
Reviewed By: ldionne, #libc_abi, #libc
Differential Revision: https://reviews.llvm.org/D86540
There are several places in LLVM's CMake setup that try to remove the
`stdlib=...` flag from the CMake flags. All this code however only considered
the `-stdlib=` variant of the flag but not the alternative spelling with a
double dash. This causes that when one adds `--stdlib=...` to the user-provided
CMake flags that this gets transformed into just `-` which ends up causing the
build system to think it should read the source from stdin (which then lead to
very confusing build errors).
This just adds the alternative spelling before the`-stdlib=` variant in all
these places
Reviewed By: ldionne
Differential Revision: https://reviews.llvm.org/D87133
Setting _LIBCPP_HAS_NO_THREADS is needed when building libcxxabi without
threads in standalone mode. This is useful when target WASM. Otherwise,
you get an error like "No thread API" when building libcxxabi.
It would be better to link against a properly-configured libc++ headers
CMake target when building libc++abi instead, but we don't generate such
targets yet.
Thanks to Matthew Bauer for the patch.
Differential Revision: https://reviews.llvm.org/D60743
add_compile_options is more sensitive to its location in the file than add_definitions--it only takes effect for sources that are added after it. This updated patch ensures that the add_compile_options is done before adding any source files that depend on it.
Using add_definitions caused the flag to be passed to rc.exe on Windows and thus broke Windows builds.
After lots of follow-up fixes, there are still problems, such as
-Wno-suggest-override getting passed to the Windows Resource Compiler
because it was added with add_definitions in the CMake file.
Rather than piling on another fix, let's revert so this can be re-landed
when there's a proper fix.
This reverts commit 21c0b4c1e8.
This reverts commit 81d68ad27b.
This reverts commit a361aa5249.
This reverts commit fa42b7cf29.
This reverts commit 955f87f947.
This reverts commit 8b16e45f66.
This reverts commit 308a127a38.
This reverts commit 274b6b0c7a.
This reverts commit 1c7037a2a5.
This patch adds Clang's new (and GCC's old) -Wsuggest-override to the warning flags for the LLVM build. The warning is a stronger form of -Winconsistent-missing-override which warns _everywhere_ that override is missing, not just in places where it's inconsistent within a class.
Some directories in the monorepo need the warning disabled for compatibility's, or sanity's, sake; in particular, libcxx/libcxxabi, and any code implementing or interoperating with googletest, googlemock, or google benchmark (which do not themselves use override). This patch adds -Wno-suggest-override to the relevant CMakeLists.txt's to accomplish this.
Differential Revision: https://reviews.llvm.org/D84126
This allows passing parameters to the test suites without using
LLVM_LIT_ARGS. The problem is that we sometimes want to set some
Lit arguments on the CMake command line, but the Lit parameters in
a CMake cache file. If the only knob to do that is LLVM_LIT_ARGS,
the command-line entry overrides the cache one, and the parameters
set by the cache are ignored.
This fixes a current issue with the build bots that they completely
ignore the 'std' param set by Lit, because other Lit arguments are
provided via LLVM_LIT_ARGS on the CMake command-line.
Instead of detecting it automatically (in libc++) and relying on
_LIBCXXABI_NO_EXCEPTIONS being set explicitly (in libc++abi), always
detect whether exceptions are enabled automatically.
This commit also removes support for specifying -D_LIBCPP_NO_EXCEPTIONS
and -D_LIBCXXABI_NO_EXCEPTIONS explicitly -- those should just be inferred
from using -fno-exceptions (or an equivalent flag).
Allowing both -D_FOO_NO_EXCEPTIONS to be provided explicitly and trying
to detect it automatically is just confusing, especially since we did
specify it explicitly when building libc++abi. We should have only one
way to detect whether exceptions are enabled, but it should be robust.
This is necessary for standalone builds where the libc++ in use has a
custom configuration set up inside __config_site -- one needs to build
libc++abi against the installed headers of libc++ (which are properly
configured) instead of the ones inside libcxx/include.
See https://reviews.llvm.org/rGe619e9d#927848 for details.
Since we have the monorepo, libc++abi's build requires a sibling checkout
of the libc++ sources. Hence, the logic for finding libc++ can be greatly
simplified.
Instead of the ad-hoc #define _LIBCXX_DYNAMIC_FALLBACK, provide an option
to enable the setting when building libc++abi. Also use the occasion to
rename the option to something slightly more descriptive.
Note that in the future, it would be great to simply remove this option
altogether. However, in the meantime, it seems better to have it be an
official option than something ad-hoc.
To avoid wasting the valuable time of contributors, add a link to a
blocked review to document additional issues with the removal of some
GCC 4.9 workaround.
We will soon start removing technical debt and sharing code between the
two directories, so this first step is meant to discover potential places
where the libraries are built outside of a monorepo layout. I imagine
this could happen as a remnant of the pre-monorepo setup.
This was discussed on the libcxx-dev mailing list and we got overall
consensus on the direction. All consumers of libc++ and libc++abi
should already be doing so through the monorepo, however it is
possible that we catch some stragglers with this patch, in which
case it may need to be reverted temporarily.
Differential Revision: https://reviews.llvm.org/D76102
Summary:
Right now the only way to force libc++abi tests to link with the static version of libc++abi is to set `LIBCXXABI_ENABLE_SHARED` to `OFF`. However, this doesn't work when libc++abi is built as standalone project because of [this](54c5224203/libcxxabi/CMakeLists.txt (L503-L519)).
This change allows specifying the version of the library for tests to link with.
This is useful for remote testing, for example, with `SSHExecutor`, where we _have_ to link with libc++abi statically.
Two new CMake options are introduced here: `LIBCXXABI_LINK_TESTS_WITH_SHARED_LIBCXXABI` and `LIBCXXABI_LINK_TESTS_WITH_SHARED_LIBCXX`. They can be set to `OFF` to tell the test utility to link tests with the static libraries.
It shouldn't break anything, because the default values of these options are set such that the test utility will behave the same way.
Reviewers: EricWF, mclow.lists, phosek, mehdi_amini, ldionne, jroelofs, bcraig
Subscribers: mgorny, christof, ldionne, libcxx-commits
Tags: #libc
Differential Revision: https://reviews.llvm.org/D71894
This is a followup to 35bc5276ca. It fixes the dependent libs usage
in libcxx and libcxxabi to link pthread and rt libraries only if CMake
detects them, rather than based on explicit platform blacklist.
Differential Revision: https://reviews.llvm.org/D70888
We build with `-nostdinc++` and add our own header path via
`LIBCXXABI_LIBCXX_INCLUDES`. However cmake tried to be clever and if
`LIBCXXABI_LIBCXX_INCLUDES` happens to match the compilers system path
it will remove the `-I` flag meaning we can't access any C++ headers.
Ideally cmake would be able see that we are using `-nostdinc++` and
disable this behaviour.
Differential Revision: https://reviews.llvm.org/D69973
That option controls the 'VERSION' attribute of the libc++abi shared
library, which in turn controls the name of the actual dylib being
produced.
llvm-svn: 373949
Martin Storsjö