I have seen this error quite frequently in our out-of-tree CHERI backends
and the lack of location information sometimes makes it quite difficult
to track down the actual source of the error.
This patch changes the llvm_unreachable() to a PrintFatalError() so that
tablegen prints a stack of source locations.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D99468
I've left mask registers to a future patch as we'll need
to convert them to full vectors, shuffle, and then truncate.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97609
This ensures that we'll match immediates consistently regardless
of whether we match them as a standalone splat or as part of
another operation.
While I was there I added complexities to the simm5/uimm5 patterns so
we didn't have to assume that the 1 on the non-immediate was lower
than what tablegen inferred.
I had to make a minor tweak to tablegen to fix one place that
didn't expect to see a ComplexPattern that wasn't a "leaf".
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96199
This primarily occurs with isel patterns using vnot. This reduces
the number of variants in the isel tables.
We generally canonicalize build_vectors of constants to the RHS. I think
we might fail if there is a bitcast on the build_vector, but that
should be easy to fix if we can find a case. Usually the
bitcast is introduced by type legalization or lowering. It's
likely canonicalization would have already occured.
We already used emplace_back in at least one other place so be
consistent.
AddPatternToMatch already took PTM as an rvalue reference, but
we need to use std::move again to move it into the PatternToMatch
vector.
Use vector::swap instead of copying to a local vector and clearing
the original. We can just swap into the just created local vector
instead which will move the pointers and not the data.
Use std::move in another place to avoid a copy.
In CodeGenDAGPatterns.cpp we were relying upon TypeSize comparison
operators for ordering types, when we can actually just use the known
minimum size since the scalable property is already being taken into
account. Also, in TypeInfer::EnforceSameSize I fixed some implicit
TypeSize->uint64_t casts by changing the code to test the equality
of TypeSize objects instead.
In other places I have replaced calls to getSizeInBits() with
getFixedSizeInBits() because we are only ever expecting integer values.
Differential Revision: https://reviews.llvm.org/D88947
This is very similar to 243970d03cace2, but handling a slightly
different form of predicated operations. When starting with a pattern of
the form select(p, BinOp(x, y), x), Instcombine will often transform
this to BinOp(x, select(p, y, 0)), where 0 is the identity value of the
binop (0 for adds/subs, 1 for muls, -1 for ands etc). This adds the
patterns that transforms those back into predicated binary operations.
There is also a very minor adjustment to tablegen null_frag in here, to
allow it to also be recognized as a PatLeaf node, so that it can be used
in MVE_TwoOpPattern to easily exclude the cases where we do not need the
alternate transform.
Differential Revision: https://reviews.llvm.org/D84091
This was checking for default operands in the current DAG instruction,
rather than the correct result operand list. I'm not entirly sure how
this managed to work before, but was failing for me when multiple
default operands were overridden.
Summary:
In the DAG pattern backend, `SimplifyTree` simplifies a pattern by
removing bitconverts between two identical types. But that function is
also run on the fragments list in instances of `PatFrags`, in which
the types haven't been specified yet. So the input and output of the
bitconvert always evaluate to the empty set of types, which makes them
compare equal. So the test always passes, and bitconverts are
unconditionally removed from the PatFrag RHS.
Fixed by spotting the empty type set and using it to inhibit the
optimization.
Reviewers: nhaehnle, hfinkel
Reviewed By: nhaehnle
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74627
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
This assumed a single pattern if there was a predicate. Relax this a
bit, and allow multiple patterns as long as they have the same class.
This was only broken for the DAG path. GlobalISel seems to have
handled this correctly already.
AMDGPU was the last in tree target to use this tablegen mode. I plan to
split up the global intrinsic enum similar to the way that clang
diagnostics are split up today. I don't plan to build on this mode.
Reviewers: arsenm, echristo, efriedma
Reviewed By: echristo
Differential Revision: https://reviews.llvm.org/D71318
* Implements scalable size queries for MVTs, split out from D53137.
* Contains a fix for FindMemType to avoid using scalable vector type
to contain non-scalable types.
* Explicit casts for several places where implicit integer sign
changes or promotion from 32 to 64 bits caused problems.
* CodeGenDAGPatterns will treat scalable and non-scalable vector types
as different.
Reviewers: greened, cameron.mcinally, sdesmalen, rovka
Reviewed By: rovka
Differential Revision: https://reviews.llvm.org/D66871
Summary:
Found by PVS Studio
Not familiar with this code; no testcase.
Reviewers: craig.topper, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69741
We're now using a lot more TargetConstant nodes in SelectionDAG.
But we were still telling isel to convert some of them
to TargetConstants even though they already are. This is because
isel emits a conversion anytime the output pattern has a an 'imm'.
I guess for patterns in instructions we take the 'timm' from the
'set' pattern, but for Pat patterns with explcicit output we
previously had to say 'imm' since 'timm' wasn't allowed in outputs.
llvm-svn: 372525
* Reordered MVT simple types to group scalable vector types
together.
* New range functions in MachineValueType.h to only iterate over
the fixed-length int/fp vector types.
* Stopped backends which don't support scalable vector types from
iterating over scalable types.
Reviewers: sdesmalen, greened
Reviewed By: greened
Differential Revision: https://reviews.llvm.org/D66339
llvm-svn: 372099
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
AMDGPU uses some custom code predicates for testing alignments.
I'm still having trouble comprehending the behavior of predicate bits
in the PatFrag hierarchy. Any attempt to abstract these properties
unexpectdly fails to apply them.
llvm-svn: 367373
Empty condition strings are considerde always true. This removes a lot
of clutter from the generated matcher tables.
This shrinks the source size of AMDGPUGenDAGISel.inc from 7.3M to
6.1M.
llvm-svn: 367326
If an intrinsic is defined without outputs, but having side effects,
it still can be removed completely from the program. This patch makes
TableGen not set Attribute::ReadNone for intrinsics which
are declared with IntrHasSideEffects.
Differential Revision: https://reviews.llvm.org/D64414
llvm-svn: 366312
Currently AMDGPU uses a CodePatPred to check address spaces from the
MachineMemOperand. Introduce a new first class property so that the
existing patterns can be easily modified to uses the new generated
predicate, which will also be handled for GlobalISel.
I would prefer these to match against the pointer type of the
instruction, but that would be difficult to get working with
SelectionDAG compatbility. This is much easier for now and will avoid
a painful tablegen rewrite for all the loads and stores.
I'm also not sure if there's a better way to encode multiple address
spaces in the table, rather than putting the number to expect.
llvm-svn: 366128
When a Tablegen instruction description uses `OperandWithDefaultOps`,
isel patterns for that instruction don't have to fill in the default
value for the operand in question. But the flip side is that they
actually //can't// override the defaults even if they want to.
This will be very inconvenient for the Arm backend, when we start
wanting to write isel patterns that generate the many MVE predicated
vector instructions, in the form with predication actually enabled. So
this small Tablegen fix makes it possible to write an isel pattern
either with or without values for a defaulted operand, and have the
default values filled in only if they are not overridden.
If all the defaulted operands come at the end of the instruction's
operand list, there's a natural way to match them up to the arguments
supplied in the pattern: consume pattern arguments until you run out,
then fill in any missing instruction operands with their default
values. But if defaulted and non-defaulted operands are interleaved,
it's less clear what to do. This does happen in existing targets (the
first example I came across was KILLGT, in the AMDGPU/R600 backend),
and of course they expect the previous behaviour (that the default for
those operands is used and a pattern argument is not consumed), so for
backwards compatibility I've stuck with that.
Reviewers: nhaehnle, hfinkel, dmgreen
Subscribers: mehdi_amini, javed.absar, tpr, kristof.beyls, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63814
llvm-svn: 365114
This is a new special identifier which you can use as a default in
OperandWithDefaultOps. The idea is that you use it for an input
operand of an instruction that's tied to an output operand, and its
semantics are that (in the default case) the input operand's value is
not used at all.
The detailed effect is that when instruction selection emits the
instruction in the form of a pre-regalloc MachineInstr, it creates an
IMPLICIT_DEF node to use as that input.
If you're creating an MCInst with explicit register names, then the
right handling would be to set the input operand to the same register
as the output one (honouring the tie) and to add the 'undef' flag
indicating that that register is deemed to acquire a new don't-care
definition just before we read it. But I haven't done that in this
commit, because there was no need to - no Tablegen backend seems to
autogenerate default fields in an MCInst.
Patch by: Simon Tatham
Differential Revision: https://reviews.llvm.org/D60696
llvm-svn: 362064
Summary:
This reverts commit r360106.
The revisioin causes llvm-tblgen to hang while generating info for
RISCV.td. The root cause might be in the RISCV.td definition but I don't
know enough about this to investigate further.
Command that starts hangning after r360106:
`llvm-build/bin/llvm-tblgen -I llvm/include -I llvm/tools/clang/include -I llvm/lib/Target/RISCV -gen-instr-info llvm/lib/Target/RISCV/RISCV.td`
Reviewers: sammccall, yan_luo, craig.topper, gribozavr
Reviewed By: gribozavr
Subscribers: PkmX, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61632
llvm-svn: 360136
Includes a fix to emit a CheckOpcode for build_vector when immAllZerosV/immAllOnesV is used as a pattern root. This means it can't be used to look through bitcasts when used as a root, but that's probably ok. This extra CheckOpcode will ensure that the first match in the isel table will be a SwitchOpcode which is needed by the caching optimization in the ISel Matcher.
Original commit message:
Previously we had build_vector PatFrags that called ISD::isBuildVectorAllZeros/Ones. Internally the ISD::isBuildVectorAllZeros/Ones look through bitcasts, but we aren't able to take advantage of that in isel. Instead of we have to canonicalize the types of the all zeros/ones build_vectors and insert bitcasts. Then we have to pattern match those exact bitcasts.
By emitting specific matchers for these 2 nodes, we can make isel look through any bitcasts without needing to explicitly match them. We should also be able to remove the canonicalization to vXi32 from lowering, but I've left that for a follow up.
This removes something like 40,000 bytes from the X86 isel table.
Differential Revision: https://reviews.llvm.org/D58595
llvm-svn: 355784
This caused the first matcher in the isel table for many targets to Opc_Scope instead of Opc_SwitchOpcode. This leads to a significant increase in isel match failures.
llvm-svn: 355433
Previously we had build_vector PatFrags that called ISD::isBuildVectorAllZeros/Ones. Internally the ISD::isBuildVectorAllZeros/Ones look through bitcasts, but we aren't able to take advantage of that in isel. Instead of we have to canonicalize the types of the all zeros/ones build_vectors and insert bitcasts. Then we have to pattern match those exact bitcasts.
By emitting specific matchers for these 2 nodes, we can make isel look through any bitcasts without needing to explicitly match them. We should also be able to remove the canonicalization to vXi32 from lowering, but I've left that for a follow up.
This removes something like 40,000 bytes from the X86 isel table.
Differential Revision: https://reviews.llvm.org/D58595
llvm-svn: 355224
Summary:
This adds support for defining patterns for global isel using pointer
types, for example:
def : Pat<(load GPR32:$src),
(p1 (LOAD GPR32:$src))>;
DAGISelEmitter will ignore the pointer information and treat these
types as integers with the same bit-width as the pointer type.
Reviewers: dsanders, rtereshin, arsenm
Reviewed By: arsenm
Subscribers: Petar.Avramovic, wdng, rovka, kristof.beyls, jfb, volkan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57065
llvm-svn: 354510
Summary:
While working on the GISel Combiner, I noticed I was producing location-less
error messages fairly often and set about fixing this. In the process, I
noticed quite a few places elsewhere in TableGen that also neglected to include
a relevant location.
This patch adds locations to errors that relate to a specific record (or a
field within it) and also have easy access to the relevant location. This is
particularly useful when multiclasses are involved as many of these errors
refer to the full name of a record and it's difficult to guess which substring
is grep-able.
Unfortunately, tablegen currently only supports Record granularity so it's not
currently possible to point at a specific Init so these sometimes point at the
record that caused the error rather than the precise origin of the error.
Reviewers: bogner, aditya_nandakumar, volkan, aemerson, paquette, nhaehnle
Reviewed By: nhaehnle
Subscribers: jdoerfert, nhaehnle, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58077
llvm-svn: 353862
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
This fixes support in DAGISelMatcher backend for DAG nodes with multiple
result values. Previously the order of results in selected DAG nodes always
matched the order of results in ISel patterns. After the change the order of
results matches the order of operands in OutOperandList instead.
For example, given this definition from the attached test case:
def INSTR : Instruction {
let OutOperandList = (outs GPR:$r1, GPR:$r0);
let InOperandList = (ins GPR:$t0, GPR:$t1);
let Pattern = [(set i32:$r0, i32:$r1, (udivrem i32:$t0, i32:$t1))];
}
the DAGISelMatcher backend currently produces a matcher that creates INSTR
nodes with the first result `$r0` and the second result `$r1`, contrary to the
order in the OutOperandList. The order of operands in OutOperandList does not
matter at all, which is unexpected (and unfortunate) because the order of
results of a DAG node does matters, perhaps a lot.
With this change, if the order in OutOperandList does not match the order in
Pattern, DAGISelMatcherGen emits CompleteMatch opcodes with the order of
results taken from OutOperandList. Backend writers can use it to express
result reorderings in TableGen.
If the order in OutOperandList matches the order in Pattern, the result of
DAGISelMatcherGen is unaffected.
Patch by Eugene Sharygin
Reviewers: andreadb, bjope, hfinkel, RKSimon, craig.topper
Reviewed By: craig.topper
Subscribers: nhaehnle, craig.topper, llvm-commits
Differential Revision: https://reviews.llvm.org/D55055
llvm-svn: 348326
Alex Richardson