As noted in post-commit comments for D52548, the limitation on
increasing vector length can be applied by opcode.
As a first step, this patch only allows insertelement to be
widened because that has no logical downsides for IR and has
little risk of pessimizing codegen.
This may cause PR39132 to go into hiding during a full compile,
but that bug is not fixed.
llvm-svn: 343406
Summary: This patch adds bindings to C and Go for addCoroutinePassesToExtensionPoints, which is used to add coroutine passes to the correct locations in PassManagerBuilder.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: mehdi_amini, modocache, llvm-commits
Differential Revision: https://reviews.llvm.org/D51642
llvm-svn: 343336
InstCombine would propagate shufflevector insts that had wider output vectors onto
predecessors, which would sometimes push undef's onto the divisor of a div/rem and
result in bad codegen.
I've fixed this by just banning propagating shufflevector back if the result of
the shufflevector is wider than the input vectors.
Patch by: @sheredom (Neil Henning)
Differential Revision: https://reviews.llvm.org/D52548
llvm-svn: 343329
This patch turns LoopInterchange into a loop pass. It now only
considers top-level loops and tries to move the innermost loop to the
optimal position within the loop nest. By only looking at top-level
loops, we might miss a few opportunities the function pass would get
(e.g. if we have a loop nest of 3 loops, in the function pass
we might process loops at level 1 and 2 and move the inner most loop to
level 1, and then we process loops at levels 0, 1, 2 and interchange
again, because we now have a different inner loop). But I think it would
be better to handle such cases by picking the best inner loop from the
start and avoid re-visiting the same loops again.
The biggest advantage of it being a function pass is that it interacts
nicely with the other loop passes. Without this patch, there are some
performance regressions on AArch64 with loop interchanging enabled,
where no loops were interchanged, but we missed out on some other loop
optimizations.
It also removes the SimplifyCFG run. We are just changing branches, so
the CFG should not be more complicated, besides the additional 'unique'
preheaders this pass might create.
Reviewers: chandlerc, efriedma, mcrosier, javed.absar, xbolva00
Reviewed By: xbolva00
Differential Revision: https://reviews.llvm.org/D51702
llvm-svn: 343308
When C is not zero and infinites are not allowed (C / X) > 0 is a sign
test. Depending on the sign of C, the predicate must be swapped.
E.g.:
foo(double X) {
if ((-2.0 / X) <= 0) ...
}
=>
foo(double X) {
if (X >= 0) ...
}
Patch by: @marels (Martin Elshuber)
Differential Revision: https://reviews.llvm.org/D51942
llvm-svn: 343228
Summary:
Add a dominance check to ensure that the possible devirtualizable
call is actually dominated by the type test/checked load intrinsic being
analyzed. With PGO, after indirect call promotion is performed during
the compile step, followed by inlining, we may have a type test in the
promoted and inlined sequence that allows an indirect call in that
sequence to be devirtualized. That indirect call (inserted by inlining
after promotion) will share the same vtable pointer as the fallback
indirect call that cannot be devirtualized.
Before this patch the code was incorrectly devirtualizing the fallback
indirect call.
See the new test and the example described there for more details.
Reviewers: pcc, vitalybuka
Subscribers: mehdi_amini, Prazek, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D52514
llvm-svn: 343226
This patch extends LoopInterchange to move LCSSA to the right place
after interchanging. This is required for LoopInterchange to become a
function pass.
An alternative to the manual moving of the PHIs, we could also re-form
the LCSSA phis for a set of interchanged loops, but that's more
expensive.
Reviewers: efriedma, mcrosier, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D52154
llvm-svn: 343132
This reverts commit bd7b44f35ee9fbe365eb25ce55437ea793b39346.
Reland r342994: disabled the optimization and explicitly enable it in test.
-mllvm -consthoist-min-num-to-rebase<unsigned>=0
[ConstHoist] Do not rebase single (or few) dependent constant
If an instance (InsertionPoint or IP) of Base constant A has only one or few
rebased constants depending on it, do NOT rebase. One extra ADD instruction is
required to materialize each rebased constant, assuming A and the rebased have
the same materialization cost.
Differential Revision: https://reviews.llvm.org/D52243
llvm-svn: 343053
Summary:
We are overly conservative in loop vectorizer with respect to stores to loop
invariant addresses.
More details in https://bugs.llvm.org/show_bug.cgi?id=38546
This is the first part of the fix where we start with vectorizing loop invariant
values to loop invariant addresses.
This also includes changes to ORE for stores to invariant address.
Reviewers: anemet, Ayal, mkuper, mssimpso
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50665
llvm-svn: 343028
If an instance (InsertionPoint or IP) of Base constant A has only one or few
rebased constants depending on it, do NOT rebase. One extra ADD instruction is
required to materialize each rebased constant, assuming A and the rebased have
the same materialization cost.
Differential Revision: https://reviews.llvm.org/D52243
llvm-svn: 342994
The motivating case from:
https://bugs.llvm.org/show_bug.cgi?id=33026
...has no shuffles now. This kind of pattern may occur during
vectorization when targets have lumpy ISAs like SSE/AVX.
llvm-svn: 342988
In this patch, I'm adding an extra check to the Latch's terminator in llvm::UnrollRuntimeLoopRemainder,
similar to how it is already done in the llvm::UnrollLoop.
The compiler would crash if this function is called with a malformed loop.
Patch by Rodrigo Caetano Rocha!
Differential Revision: https://reviews.llvm.org/D51486
llvm-svn: 342958
Summary:
Display a list of recent stack frames (not a stack trace!) when
tag-mismatch is detected on a stack address.
The implementation uses alignment tricks to get both the address of
the history buffer, and the base address of the shadow with a single
8-byte load. See the comment in hwasan_thread_list.h for more
details.
Developed in collaboration with Kostya Serebryany.
Reviewers: kcc
Subscribers: srhines, kubamracek, mgorny, hiraditya, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D52249
llvm-svn: 342923
Summary:
Display a list of recent stack frames (not a stack trace!) when
tag-mismatch is detected on a stack address.
The implementation uses alignment tricks to get both the address of
the history buffer, and the base address of the shadow with a single
8-byte load. See the comment in hwasan_thread_list.h for more
details.
Developed in collaboration with Kostya Serebryany.
Reviewers: kcc
Subscribers: srhines, kubamracek, mgorny, hiraditya, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D52249
llvm-svn: 342921
We can handle patterns where the elements have different
sizes, so refactoring ahead of trying to add another blob
within these clauses.
llvm-svn: 342918
'width' of a vector usually refers to the bit-width.
https://bugs.llvm.org/show_bug.cgi?id=39016
shows a case where we could extend this fold to handle
a case where the number of elements in the bitcasted
vector is not equal to the resulting value.
llvm-svn: 342902
DeadArgElim pass marks unused function arguments as ‘undef’ without updating
existing dbg.values referring to it. As a consequence the debug info
metadata in the final executable was wrong.
Patch by Djordje Todorovic.
Differential Revision: https://reviews.llvm.org/D51968
llvm-svn: 342871
Follow-up to rL342324 (D52059):
Missing optimizations with blendv are shown in:
https://bugs.llvm.org/show_bug.cgi?id=38814
This is an easier and more powerful solution than adding pattern matching for a few
special cases in the backend. The potential danger with this transform in IR is that
the condition value can get separated from the select, and the backend might not be
able to make a blendv out of it again.
llvm-svn: 342806
Summary: This restores the combine that was reverted in r341883. The infinite loop from the failing test no longer occurs due to changes from r342163.
Reviewers: spatel, dmgreen
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52070
llvm-svn: 342797
Support for vectorizing loops with secondary floating-point induction
variables was added in r276554. A primary integer IV is still required
for vectorization to be done. If an FP IV was found, but no integer IV
was found at all (primary or secondary), the attempt to vectorize still
went forward, causing a compiler-crash. This change abandons that
attempt when no integer IV is found. (Vectorizing FP-only cases like
this, rather than bailing out, is discussed as possible future work
in D52327.)
See PR38800 for more information.
Differential Revision: https://reviews.llvm.org/D52327
llvm-svn: 342786
Summary:
The default target of the switch instruction may sometimes be an
"unreachable" block, when it is guaranteed that one of the cases is
always taken. The dominator tree concludes that such a switch
instruction does not have an immediate post dominator. This confuses
divergence analysis, which is unable to propagate sync dependence to
the targets of the switch instruction.
As a workaround, the AMDGPU target now invokes lower-switch as a
preISel pass. LowerSwitch is designed to handle the unreachable
default target correctly, allowing the divergence analysis to locate
the correct immediate dominator of the now-lowered switch.
Reviewers: arsenm, nhaehnle
Reviewed By: nhaehnle
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits, simoll
Differential Revision: https://reviews.llvm.org/D52221
llvm-svn: 342722
Summary:
his code was in CGDecl.cpp and really belongs in LLVM's isBytewiseValue. Teach isBytewiseValue the tricks clang's isRepeatedBytePattern had, including merging undef properly, and recursing on more types.
clang part of this patch: D51752
Subscribers: dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D51751
llvm-svn: 342709
Summary:
AvailableExternal was not handled in isDiscardableIfUnused when isDiscardableIfUnused
was added in r158476. Till it was handled in r247044. This is a NFC.
Reviewers: pcc, tejohnson
Reviewed By: tejohnson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52319
llvm-svn: 342684
Pass Execution Instrumentation interface enables customizable instrumentation
of pass execution, as per "RFC: Pass Execution Instrumentation interface"
posted 06/07/2018 on llvm-dev@
The intent is to provide a common machinery to implement all
the pass-execution-debugging features like print-before/after,
opt-bisect, time-passes etc.
Here we get a basic implementation consisting of:
* PassInstrumentationCallbacks class that handles registration of callbacks
and access to them.
* PassInstrumentation class that handles instrumentation-point interfaces
that call into PassInstrumentationCallbacks.
* Callbacks accept StringRef which is just a name of the Pass right now.
There were some ideas to pass an opaque wrapper for the pointer to pass instance,
however it appears that pointer does not actually identify the instance
(adaptors and managers might have the same address with the pass they govern).
Hence it was decided to go simple for now and then later decide on what the proper
mental model of identifying a "pass in a phase of pipeline" is.
* Callbacks accept llvm::Any serving as a wrapper for const IRUnit*, to remove direct dependencies
on different IRUnits (e.g. Analyses).
* PassInstrumentationAnalysis analysis is explicitly requested from PassManager through
usual AnalysisManager::getResult. All pass managers were updated to run that
to get PassInstrumentation object for instrumentation calls.
* Using tuples/index_sequence getAnalysisResult helper to extract generic AnalysisManager's extra
args out of a generic PassManager's extra args. This is the only way I was able to explicitly
run getResult for PassInstrumentationAnalysis out of a generic code like PassManager::run or
RepeatedPass::run.
TODO: Upon lengthy discussions we agreed to accept this as an initial implementation
and then get rid of getAnalysisResult by improving RepeatedPass implementation.
* PassBuilder takes PassInstrumentationCallbacks object to pass it further into
PassInstrumentationAnalysis. Callbacks registration should be performed directly
through PassInstrumentationCallbacks.
* new-pm tests updated to account for PassInstrumentationAnalysis being run
* Added PassInstrumentation tests to PassBuilderCallbacks unit tests.
Other unit tests updated with registration of the now-required PassInstrumentationAnalysis.
Made getName helper to return std::string (instead of StringRef initially) to fix
asan builtbot failures on CGSCC tests.
Reviewers: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D47858
llvm-svn: 342664
Summary:
Before removing basic blocks that ipsccp has considered as dead
all uses of the basic block label must be removed. That is done
by calling ConstantFoldTerminator on the users. An exception
is when the branch condition is an undef value. In such
scenarios ipsccp is using some internal assumptions regarding
which edge in the control flow that should remain, while
ConstantFoldTerminator don't know how to fold the terminator.
The problem addressed here is related to ConstantFoldTerminator's
ability to rewrite a 'switch' into a conditional 'br'. In such
situations ConstantFoldTerminator returns true indicating that
the terminator has been rewritten. However, ipsccp treated the
true value as if the edge to the dead basic block had been
removed. So the code for resolving an undef branch condition
did not trigger, and we ended up with assertion that there were
uses remaining when deleting the basic block.
The solution is to resolve indeterminate branches before the
call to ConstantFoldTerminator.
Reviewers: efriedma, fhahn, davide
Reviewed By: fhahn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52232
llvm-svn: 342632
Summary:
Some lines have a hit counter where they should not have one.
For example, in C++, some cleanup is adding at the end of a scope represented by a '}'.
So such a line has a hit counter where a user expects to not have one.
The goal of the patch is to add this information in DILocation which is used to get the covered lines in GCOVProfiling.cpp.
A following patch in clang will add this information when generating IR (https://reviews.llvm.org/D49916).
Reviewers: marco-c, davidxl, vsk, javed.absar, rnk
Reviewed By: rnk
Subscribers: eraman, xur, danielcdh, aprantl, rnk, dblaikie, #debug-info, vsk, llvm-commits, sylvestre.ledru
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D49915
llvm-svn: 342631
Pass Execution Instrumentation interface enables customizable instrumentation
of pass execution, as per "RFC: Pass Execution Instrumentation interface"
posted 06/07/2018 on llvm-dev@
The intent is to provide a common machinery to implement all
the pass-execution-debugging features like print-before/after,
opt-bisect, time-passes etc.
Here we get a basic implementation consisting of:
* PassInstrumentationCallbacks class that handles registration of callbacks
and access to them.
* PassInstrumentation class that handles instrumentation-point interfaces
that call into PassInstrumentationCallbacks.
* Callbacks accept StringRef which is just a name of the Pass right now.
There were some ideas to pass an opaque wrapper for the pointer to pass instance,
however it appears that pointer does not actually identify the instance
(adaptors and managers might have the same address with the pass they govern).
Hence it was decided to go simple for now and then later decide on what the proper
mental model of identifying a "pass in a phase of pipeline" is.
* Callbacks accept llvm::Any serving as a wrapper for const IRUnit*, to remove direct dependencies
on different IRUnits (e.g. Analyses).
* PassInstrumentationAnalysis analysis is explicitly requested from PassManager through
usual AnalysisManager::getResult. All pass managers were updated to run that
to get PassInstrumentation object for instrumentation calls.
* Using tuples/index_sequence getAnalysisResult helper to extract generic AnalysisManager's extra
args out of a generic PassManager's extra args. This is the only way I was able to explicitly
run getResult for PassInstrumentationAnalysis out of a generic code like PassManager::run or
RepeatedPass::run.
TODO: Upon lengthy discussions we agreed to accept this as an initial implementation
and then get rid of getAnalysisResult by improving RepeatedPass implementation.
* PassBuilder takes PassInstrumentationCallbacks object to pass it further into
PassInstrumentationAnalysis. Callbacks registration should be performed directly
through PassInstrumentationCallbacks.
* new-pm tests updated to account for PassInstrumentationAnalysis being run
* Added PassInstrumentation tests to PassBuilderCallbacks unit tests.
Other unit tests updated with registration of the now-required PassInstrumentationAnalysis.
Reviewers: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D47858
llvm-svn: 342597
Summary:
Same as to D52146.
`((1 << y)+(-1))` is simply non-canoniacal version of `~(-1 << y)`: https://rise4fun.com/Alive/0vl
We can not canonicalize it due to the extra uses. But we can handle it here.
Reviewers: spatel, craig.topper, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52147
llvm-svn: 342547
Summary:
Two folds are happening here:
1. https://rise4fun.com/Alive/oaFX
2. And then `foldICmpWithHighBitMask()` (D52001): https://rise4fun.com/Alive/wsP4
This change doesn't just add the handling for eq/ne predicates,
it actually builds upon the previous `foldICmpWithLowBitMaskedVal()` work,
so **all** the 16 fold variants* are immediately supported.
I'm indeed only testing these two predicates.
I do not feel like re-proving all 16 folds*, because they were already proven
for the general case of constant with all-ones in low bits. So as long as
the mask produces all-ones in low bits, i'm pretty sure the fold is valid.
But required, i can re-prove, let me know.
* eq/ne are commutative - 4 folds; ult/ule/ugt/uge - are not commutative (the commuted variant is InstSimplified), 4 folds; slt/sle/sgt/sge are not commutative - 4 folds. 12 folds in total.
https://bugs.llvm.org/show_bug.cgi?id=38123https://bugs.llvm.org/show_bug.cgi?id=38708
Reviewers: spatel, craig.topper, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52146
llvm-svn: 342546
Summary:
Pass Execution Instrumentation interface enables customizable instrumentation
of pass execution, as per "RFC: Pass Execution Instrumentation interface"
posted 06/07/2018 on llvm-dev@
The intent is to provide a common machinery to implement all
the pass-execution-debugging features like print-before/after,
opt-bisect, time-passes etc.
Here we get a basic implementation consisting of:
* PassInstrumentationCallbacks class that handles registration of callbacks
and access to them.
* PassInstrumentation class that handles instrumentation-point interfaces
that call into PassInstrumentationCallbacks.
* Callbacks accept StringRef which is just a name of the Pass right now.
There were some ideas to pass an opaque wrapper for the pointer to pass instance,
however it appears that pointer does not actually identify the instance
(adaptors and managers might have the same address with the pass they govern).
Hence it was decided to go simple for now and then later decide on what the proper
mental model of identifying a "pass in a phase of pipeline" is.
* Callbacks accept llvm::Any serving as a wrapper for const IRUnit*, to remove direct dependencies
on different IRUnits (e.g. Analyses).
* PassInstrumentationAnalysis analysis is explicitly requested from PassManager through
usual AnalysisManager::getResult. All pass managers were updated to run that
to get PassInstrumentation object for instrumentation calls.
* Using tuples/index_sequence getAnalysisResult helper to extract generic AnalysisManager's extra
args out of a generic PassManager's extra args. This is the only way I was able to explicitly
run getResult for PassInstrumentationAnalysis out of a generic code like PassManager::run or
RepeatedPass::run.
TODO: Upon lengthy discussions we agreed to accept this as an initial implementation
and then get rid of getAnalysisResult by improving RepeatedPass implementation.
* PassBuilder takes PassInstrumentationCallbacks object to pass it further into
PassInstrumentationAnalysis. Callbacks registration should be performed directly
through PassInstrumentationCallbacks.
* new-pm tests updated to account for PassInstrumentationAnalysis being run
* Added PassInstrumentation tests to PassBuilderCallbacks unit tests.
Other unit tests updated with registration of the now-required PassInstrumentationAnalysis.
Reviewers: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D47858
llvm-svn: 342544
This is still unsafe for long double, we will transform things into tanl
even if tanl is for another type. But that's for someone else to fix.
llvm-svn: 342542
When SimplifyCFG changes the PHI node into a select instruction, the debug information becomes ambiguous. It causes the debugger to display wrong variable value.
Differential Revision: https://reviews.llvm.org/D51976
llvm-svn: 342527
Summary:
Currently only the first function in the module is checked to
see if it has remarks enabled. If that first function is a declaration,
remarks will be incorrectly skipped. Change to look for the first
non-empty function.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D51556
llvm-svn: 342477
Summary:
Adds LLVMAddUnifyFunctionExitNodesPass to expose
createUnifyFunctionExitNodesPass to the C and OCaml APIs.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52212
llvm-svn: 342476
A piece of logic in rewriteLoopExitValues has a weird check on number of
users which allowed an unprofitable transform in case if an instruction has
more than 6 users.
Differential Revision: https://reviews.llvm.org/D51404
Reviewed By: etherzhhb
llvm-svn: 342444
This was checking the hardcoded address space 0 for the stack.
Additionally, this should be checking for legality with
the adjusted alignment, so defer the alignment check.
Also try to split if the unaligned access isn't allowed.
llvm-svn: 342442
Summary:
EarlyCSE can make IR changes that will leave MemorySSA with accesses claiming to be optimized, but for which a subsequent MemorySSA run will yield a different optimized result.
Due to relying on AA queries, we can't fix this in general, unless we recompute MemorySSA.
Adding some tests to track this and a basic verify for future potential failures.
Reviewers: george.burgess.iv, gberry
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D51960
llvm-svn: 342422
Rebase rL341954 since https://bugs.llvm.org/show_bug.cgi?id=38912
has been fixed by rL342055.
Precommit testing performed:
* Overnight runs of csmith comparing the output between programs
compiled with gvn-hoist enabled/disabled.
* Bootstrap builds of clang with UbSan/ASan configurations.
llvm-svn: 342387
Summary:
If the sub doesn't overflow in the original type we can move it above the sext/zext.
This is similar to what we do for add. The overflow checking for sub is currently weaker than add, so the test cases are constructed for what is supported.
Reviewers: spatel
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52075
llvm-svn: 342335
Missing optimizations with blendv are shown in:
https://bugs.llvm.org/show_bug.cgi?id=38814
If this works, it's an easier and more powerful solution than adding pattern matching
for a few special cases in the backend. The potential danger with this transform in IR
is that the condition value can get separated from the select, and the backend might
not be able to make a blendv out of it again. I don't think that's too likely, but
I've kept this patch minimal with a 'TODO', so we can test that theory in the wild
before expanding the transform.
Differential Revision: https://reviews.llvm.org/D52059
llvm-svn: 342324
Similar to rL342278:
The test diffs are all cosmetic due to the change in
value naming, but I'm including that to show that the
new code does perform these folds rather than something
else in instcombine.
D52075 should be able to use this code too rather than
duplicating all of the logic.
llvm-svn: 342292
The patch saves a function offset table which maps function name index to the
offset of its function profile to the start of the binary profile. By using
the function offset table, for those function profiles which will not be used
when compiling a module, the profile reader does't have to read them. For
profile size around 10~20M, it saves ~10% compile time.
Differential Revision: https://reviews.llvm.org/D51863
llvm-svn: 342283
The test diffs are all cosmetic due to the change in
value naming, but I'm including that to show that the
new code does perform these folds rather than something
else in instcombine.
llvm-svn: 342278
The test used to fail with an invalid phi node: the two predecessors were outlined
and the SSA representation was left invalid. The patch adds the exit block to the
cold region.
llvm-svn: 342277
remove duplicate entries from isSingleEntrySingleExit: the Entry block is
already added by the loop over the dominance frontier.
Remove the heuristic from isOutlineCandidate that a region is too small when it
only contains a basic block. With this change we now grow regions starting from
a block and we continue adding to the ValidColdRegion. Check the heuristic just
before code generation.
llvm-svn: 342276
Also fix a problem in forward propagation:
const TerminatorInst *TI = It->getTerminator();
was set outside the while loop that iterates over It.
llvm-svn: 342275
As preparation for LoopInterchange becoming a loop pass, it needs to
preserve ScalarEvolution. Even though interchanging should not change
the trip count of the loop, it modifies loop entry, latch and exit
blocks.
I added -verify-scev to some loop interchange tests, but the verification does
not catch problems caused by missing invalidation of SE in loop interchange, as
the trip counts themselves do not change. So there might be potential to
make the SE verification covering more stuff in the future.
Reviewers: mkazantsev, efriedma, karthikthecool
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D52026
llvm-svn: 342209
Summary:
[VPlan] Implement vector code generation support for simple outer loops.
Context: Patch Series #1 for outer loop vectorization support in LV using VPlan. (RFC: http://lists.llvm.org/pipermail/llvm-dev/2017-December/119523.html).
This patch introduces vector code generation support for simple outer loops that are currently supported in the VPlanNativePath. Changes here essentially do the following:
- force vector code generation using explicit vectorize_width
- add conservative early returns in cost model and other places for VPlanNativePath
- add code for setting up outer loop inductions
- support for widening non-induction PHIs that can result from inner loops and uniform conditional branches
- support for generating uniform inner branches
We plan to add a handful C outer loop executable tests once the initial code generation support is committed. This patch is expected to be NFC for the inner loop vectorizer path. Since we are moving in the direction of supporting outer loop vectorization in LV, it may also be time to rename classes such as InnerLoopVectorizer.
Reviewers: fhahn, rengolin, hsaito, dcaballe, mkuper, hfinkel, Ayal
Reviewed By: fhahn, hsaito
Subscribers: dmgreen, bollu, tschuett, rkruppe, rogfer01, llvm-commits
Differential Revision: https://reviews.llvm.org/D50820
llvm-svn: 342197
Summary:
Place global arrays in comdat sections with their associated functions.
This makes sure they are stripped along with the functions they
reference, even on the BFD linker.
Reviewers: eugenis
Reviewed By: eugenis
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D51902
llvm-svn: 342186
Summary:
It is sometimes important to check that some newly-computed value
is non-negative and only n bits wide (where n is a variable.)
There are many ways to check that:
https://godbolt.org/z/o4RB8D
The last variant seems best?
(I'm sure there are some other variations i haven't thought of..)
More complicated, canonical pattern:
https://rise4fun.com/Alive/uhA
We do need to have two `switch()`'es like this,
to not mismatch the swappable predicates.
https://bugs.llvm.org/show_bug.cgi?id=38708
Reviewers: spatel, craig.topper, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52001
llvm-svn: 342173
This adds DebugCounter support to the PartiallyInlineLibCalls pass,
which should make debugging/automated bisection easier in the future.
Patch by Zhizhou Yang!
Differential Revision: https://reviews.llvm.org/D50093
llvm-svn: 342172
This allows the xor to be removed completely.
This might help with recomitting r341674, but seems good regardless.
Coincidentally fixes PR38915.
Differential Revision: https://reviews.llvm.org/D51964
llvm-svn: 342163
I accidentally committed this diff with rL342147 because
I had applied D51964. We probably do need those checks,
but D51964 has tests and more discussion/motivation,
so they should be re-added with that patch.
llvm-svn: 342149
I don't have a test case for this, but it's motivated by
the discussion in D51964, and I've added TODO comments for
the better fix - move simplifications into instsimplify
because that's more efficient and reduces risk of infinite
loops in instcombine caused by transforms trying to do the
opposite folds.
In this case, we know that the transform that tries to move
'not' through min/max can be fooled by the multiple uses
of a value in another min/max, so try to squash the
foldSPFofSPF() patterns first.
llvm-svn: 342147
Summary:
It is sometimes important to check that some newly-computed value
is non-negative and only `n` bits wide (where `n` is a variable.)
There are **many** ways to check that:
https://godbolt.org/z/o4RB8D
The last variant seems best?
(I'm sure there are some other variations i haven't thought of..)
Let's handle the second variant first, since it is much simpler.
https://rise4fun.com/Alive/LYjYhttps://bugs.llvm.org/show_bug.cgi?id=38708
Reviewers: spatel, craig.topper, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51985
llvm-svn: 342067
Fix for https://bugs.llvm.org/show_bug.cgi?id=38912.
In GVNHoist::computeInsertionPoints() we iterate over the Value
Numbers and calculate the Iterated Dominance Frontiers without
clearing the IDFBlocks vector first. IDFBlocks ends up accumulating
an insane number of basic blocks, which bloats the compilation time
of SemaChecking.cpp with ubsan enabled.
Differential Revision: https://reviews.llvm.org/D51980
llvm-svn: 342055
Previously the alignment on the newly created switch table data was not set,
meaning that DataLayout::getPreferredAlignment was free to overalign it to 16
bytes. This causes unnecessary code bloat.
Differential Revision: https://reviews.llvm.org/D51800
llvm-svn: 342039
Move the 2 classes out of LoopVectorize.cpp to make it easier to re-use
them for VPlan outside LoopVectorize.cpp
Reviewers: Ayal, mssimpso, rengolin, dcaballe, mkuper, hsaito, hfinkel, xbolva00
Reviewed By: rengolin, xbolva00
Differential Revision: https://reviews.llvm.org/D49488
llvm-svn: 342027
Summary:
The InductionDescriptor and RecurrenceDescriptor classes basically analyze the IR to identify the respective IVs. So, it is better to have them in the "Analysis" directory instead of the "Transforms" directory.
The rationale for this is to make the Induction and Recurrence descriptor classes available for analysis passes. Currently including them in an analysis pass produces link error (http://lists.llvm.org/pipermail/llvm-dev/2018-July/124456.html).
Induction and Recurrence descriptors are moved from Transforms/Utils/LoopUtils.h|cpp to Analysis/IVDescriptors.h|cpp.
Reviewers: dmgreen, llvm-commits, hfinkel
Reviewed By: dmgreen
Subscribers: mgorny
Differential Revision: https://reviews.llvm.org/D51153
llvm-svn: 342016
Name: op_ugt_sum
%a = add i8 %x, %y
%r = icmp ugt i8 %x, %a
=>
%notx = xor i8 %x, -1
%r = icmp ugt i8 %y, %notx
Name: sum_ult_op
%a = add i8 %x, %y
%r = icmp ult i8 %a, %x
=>
%notx = xor i8 %x, -1
%r = icmp ugt i8 %y, %notx
https://rise4fun.com/Alive/ZRxI
AFAICT, this doesn't interfere with any add-saturation patterns
because those have >1 use for the 'add'. But this should be
better for IR analysis and codegen in the basic cases.
This is another fold inspired by PR14613:
https://bugs.llvm.org/show_bug.cgi?id=14613
llvm-svn: 342004
This reverts rL341954.
The builder `sanitizer-x86_64-linux-bootstrap-ubsan` has been
failing with timeouts at stage2 clang/ubsan:
[3065/3073] Linking CXX executable bin/lld
command timed out: 1200 seconds without output running python
../sanitizer_buildbot/sanitizers/buildbot_selector.py,
attempting to kill
llvm-svn: 342001
These are the folds in Alive;
Name: xor_ult
Pre: isPowerOf2(-C1)
%xor = xor i8 %x, C1
%r = icmp ult i8 %xor, C1
=>
%r = icmp ugt i8 %x, ~C1
Name: xor_ugt
Pre: isPowerOf2(C1+1)
%xor = xor i8 %x, C1
%r = icmp ugt i8 %xor, C1
=>
%r = icmp ugt i8 %x, C1
https://rise4fun.com/Alive/Vty
The ugt case in its simplest form was already handled by DemandedBits,
but that's not ideal as shown in the multi-use test.
I'm not sure if these are all of the symmetrical folds, but I adjusted
the existing code for one of the folds to try to show the similarities.
There's no obvious connection, but this is another preliminary step
for PR14613...
https://bugs.llvm.org/show_bug.cgi?id=14613
llvm-svn: 341997
Summary:
Place global arrays in comdat sections with their associated functions.
This makes sure they are stripped along with the functions they
reference, even on the BFD linker.
Reviewers: eugenis
Reviewed By: eugenis
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D51902
llvm-svn: 341987
Summary:
Update MemorySSA in old LoopUnswitch pass.
Actual dependency and update is disabled by default.
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D45301
llvm-svn: 341984
I noticed that we were not back-propagating undef lanes to shuffle masks when we have a
shuffle that reduces the vector width. This is part of investigating/solving PR38691:
https://bugs.llvm.org/show_bug.cgi?id=38691
The DAG equivalent was proposed with:
D51696
Differential Revision: https://reviews.llvm.org/D51433
llvm-svn: 341981
Right now, the counters are added in regards of the number of successors
for a given BasicBlock: it's good when we've only 1 or 2 successors (at
least with BranchInstr). But in the case of a switch statement, the
BasicBlock after switch has several predecessors and we need know from
which BB we're coming from.
So the idea is to revert what we're doing: add a PHINode in each block
which will select the counter according to the incoming BB. They're
several pros for doing that:
- we fix the "switch" bug
- we remove the function call to "__llvm_gcov_indirect_counter_increment"
and the lookup table stuff
- we replace by PHINodes, so the optimizer will probably makes a better
job.
Patch by calixte!
Differential Revision: https://reviews.llvm.org/D51619
llvm-svn: 341977
For vectors, getPrimitiveSizeInBits returns the full vector width. This code should using the element size for vectors. This could be fixed by calling getScalarSizeInBits, but its even easier to just get it from the APInt we're checking.
Differential Revision: https://reviews.llvm.org/D51938
llvm-svn: 341971
There are 2 cases when we create PHI nodes:
* For the result of the call that was duplicated in the split blocks.
Those PHI nodes should have the debug location of the call.
* For values produced before the call. Those instructions need to be
duplicated in the split blocks and the PHI nodes should have the
debug locations of those instructions.
Fixes PR37962.
Reviewers: junbuml, gbedwell, vsk
Reviewed By: junbuml
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D51919
llvm-svn: 341970
Summary:
Place global arrays in comdat sections with their associated functions.
This makes sure they are stripped along with the functions they
reference, even on the BFD linker.
Reviewers: eugenis
Reviewed By: eugenis
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D51902
llvm-svn: 341951
The presence of readnone and an access range attribute (argmemonly,
inaccessiblememonly, inaccessiblemem_or_argmemonly) is considered an
error by the verifier. This seems strict but also not wrong. This
patch makes sure function attribute detection will remove all access
range attributes for readnone functions.
llvm-svn: 341927
Currently we re-use cached info from sub loops or traverse them
to populate AliasSetTracker. But after that we traverse all basic blocks
from the current loop. This is redundant work.
All what we need is traversing the all basic blocks from the loop except
those which are used to get the data from the cache.
This should improve compile time only.
Reviewers: mkazantsev, reames, kariddi, anna
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51715
llvm-svn: 341896
IndVarSimplify's design is somewhat odd in the way how it reports that
some transform has made a change. It has a `Changed` field which can
be set from within any function, which makes it hard to track whether or
not it was set properly after a transform was made. It leads to oversights
in setting this flag where needed, see example in PR38855.
This patch removes the `Changed` field, turns it into a local and unifies
the signatures of all relevant transform functions to return boolean value
which designates whether or not this transform has made a change.
Differential Revision: https://reviews.llvm.org/D51850
Reviewed By: skatkov
llvm-svn: 341893
I'd made exactly this same change before, but it appears to have been accidentally reverted in another change. (I'm assuming accidental since it was without comment or test case, and in an unrelated change.)
llvm-svn: 341892
Summary:
Revert min/max changes in rL341674 dues to high compile times causing timeouts (PR38897).
Checking in to unblock failing builds. Patch available for post-commit review and re-revert once resolved.
Working on a smaller reproducer for PR38897.
Reviewers: craig.topper, spatel
Subscribers: sanjoy, jlebar, llvm-commits
Differential Revision: https://reviews.llvm.org/D51897
llvm-svn: 341883
Before tagging a function with coldcc make sure the target supports cold calling
convention. Without this patch HotColdSplitting pass fails on aarch64 with:
fatal error: error in backend: Unsupported calling convention.
llvm-svn: 341838
There were two combines not covered by the check before now, neither of which
actually differed from normal in the benefit analysis.
The most recent seems to be because it was just added at the top of the
function (naturally). The older is from way back in 2008 (r46687) when we just
didn't put those checks in so routinely, and has been diligently maintained
since.
llvm-svn: 341831
When GVN propagates an equality by replacing one value with another it also
needs to invalidate the cached information for the value being replaced.
Differential Revision: https://reviews.llvm.org/D51218
llvm-svn: 341820
Currently, `rewriteFirstIterationLoopExitValues` does not set Changed flag even if it makes
changes in the IR. There is no clear evidence that it can cause a crash, but it
looks highly suspicious and likely invalid.
Differential Revision: https://reviews.llvm.org/D51779
Reviewed By: skatkov
llvm-svn: 341779
Currently, `sinkUnusedInvariants` does not set Changed flag even if it makes
changes in the IR. There is no clear evidence that it can cause a crash, but it
looks highly suspicious and likely invalid.
Differential Revision: https://reviews.llvm.org/D51777
Reviewed By: skatkov
llvm-svn: 341777
Summary:
Move InductionDescriptor::transform() routine from LoopUtils to its only uses in LoopVectorize.cpp.
Specifically, the function is renamed as InnerLoopVectorizer::emitTransformedIndex().
This is a child to D51153.
Reviewers: dmgreen, llvm-commits
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D51837
llvm-svn: 341776
Summary:
Block splitting is done with either identical edges being merged, or not.
Only critical edges can be split without merging identical edges based on an option.
Teach the memoryssa updater to take this into account: for the same edge between two blocks only move one entry from the Phi in Old to the new Phi in New.
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D51563
llvm-svn: 341709
shuf (sel (shuf NarrowCond, undef, WideMask), X, Y), undef, NarrowMask) -->
sel NarrowCond, (shuf X, undef, NarrowMask), (shuf Y, undef, NarrowMask)
The motivating case from:
https://bugs.llvm.org/show_bug.cgi?id=38691
...is the last regression test. In that case, we're just left with the narrow select.
Note that if we do create new shuffles, they use the existing extraction identity mask,
so there's no danger that this transform creates arbitrary shuffles.
Differential Revision: https://reviews.llvm.org/D51496
llvm-svn: 341708
Summary:
Do away with demangling. It wasn't really necessary.
Declared some local functions to be static.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51740
llvm-svn: 341681
If the ~X wasn't able to simplify above the max/min, we might be able to simplify it by moving it below the max/min.
I had to modify the ~(min/max ~X, Y) transform to prevent getting stuck in a loop when we saw the new ~(max/min X, ~Y) before the ~Y had been folded away to remove the new not.
Differential Revision: https://reviews.llvm.org/D51398
llvm-svn: 341674
Fix a latent bug in loop vectorizer which generates incorrect code for
memory accesses that are executed conditionally. As pointed in review,
this bug definitely affects uniform loads and may affect conditional
stores that should have turned into scatters as well).
The code gen for conditionally executed uniform loads on architectures
that support masked gather instructions is broken.
Without this patch, we were unconditionally executing the *conditional*
load in the vectorized version.
This patch does the following:
1. Uniform conditional loads on architectures with gather support will
have correct code generated. In particular, the cost model
(setCostBasedWideningDecision) is fixed.
2. For the recipes which are handled after the widening decision is set,
we use the isScalarWithPredication(I, VF) form which is added in the
patch.
3. Fix the vectorization cost model for scalarization
(getMemInstScalarizationCost): implement and use isPredicatedInst to
identify *all* predicated instructions, not just scalar+predicated. So,
now the cost for scalarization will be increased for maskedloads/stores
and gather/scatter operations. In short, we should be choosing the
gather/scatter in place of scalarization on archs where it is
profitable.
4. We needed to weaken the assert in useEmulatedMaskMemRefHack.
Reviewers: Ayal, hsaito, mkuper
Differential Revision: https://reviews.llvm.org/D51313
llvm-svn: 341673
Find cold blocks based on profile information (or optionally with static analysis).
Forward propagate profile information to all cold-blocks.
Outline a cold region.
Set calling conv and prof hint for the callsite of the outlined function.
Worked in collaboration with: Sebastian Pop <s.pop@samsung.com>
Differential Revision: https://reviews.llvm.org/D50658
llvm-svn: 341669
If OtherOpT or OtherOpF have scalar types and the condition is a vector,
we would create an invalid select.
Reviewers: spatel, john.brawn, mssimpso, craig.topper
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D51781
llvm-svn: 341666
Currently eliminateInstructions only returns true if any instruction got
replaced. In the test case for this patch, we eliminate the trivially
dead calls, for which eliminateInstructions not do a replacement and the
function is not marked as changed, which is why the inliner crashes
while traversing the call graph.
Alternatively we could also change eliminateInstructions to return true
in case we mark instructions for deletion, but that's slightly more code
and doing it at the place where the replacement happens seems safer.
Fixes PR37517.
Reviewers: davide, mcrosier, efriedma, bjope
Reviewed By: bjope
Differential Revision: https://reviews.llvm.org/D51169
llvm-svn: 341651
Introduce the -msan-kernel flag, which enables the kernel instrumentation.
The main differences between KMSAN and MSan instrumentations are:
- KMSAN implies msan-track-origins=2, msan-keep-going=true;
- there're no explicit accesses to shadow and origin memory.
Shadow and origin values for a particular X-byte memory location are
read and written via pointers returned by
__msan_metadata_ptr_for_load_X(u8 *addr) and
__msan_store_shadow_origin_X(u8 *addr, uptr shadow, uptr origin);
- TLS variables are stored in a single struct in per-task storage. A call
to a function returning that struct is inserted into every instrumented
function before the entry block;
- __msan_warning() takes a 32-bit origin parameter;
- local variables are poisoned with __msan_poison_alloca() upon function
entry and unpoisoned with __msan_unpoison_alloca() before leaving the
function;
- the pass doesn't declare any global variables or add global constructors
to the translation unit.
llvm-svn: 341637
IndVars does not set `Changed` flag when it eliminates dead instructions. As result,
it may make IR modifications and report that it has done nothing. It leads to inconsistent
preserved analyzes results.
Differential Revision: https://reviews.llvm.org/D51770
Reviewed By: skatkov
llvm-svn: 341633
The patch tries to make sample profile loader independent of profile format
change. It moves compact format related code into FunctionSamples and
SampleProfileReader classes, and sample profile loader only has to interact
with those two classes and will be unaware of profile format changes.
The cleanup also contain some fixes to further remove the difference between
compactbinary format and binary format. After the cleanup using different
formats originated from the same profile will generate the same binaries,
which we verified by compiling two large server benchmarks w/wo thinlto.
Differential Revision: https://reviews.llvm.org/D51643
llvm-svn: 341591
This fold is needed to avoid a regression when we try
to recommit rL300977.
We can't see the most basic win currently because
demanded bits changes the patterns:
https://rise4fun.com/Alive/plpp
llvm-svn: 341559
Add the __msan_va_arg_origin_tls TLS array to keep the origins for variadic function parameters.
Change the instrumentation pass to store parameter origins in this array.
This is a reland of r341528.
test/msan/vararg.cc doesn't work on Mips, PPC and AArch64 (because this
patch doesn't touch them), XFAIL these arches.
Also turned out Clang crashed on i80 vararg arguments because of
incorrect origin type returned by getOriginPtrForVAArgument() - fixed it
and added a test.
llvm-svn: 341554
I'm preparing to add the same functionality both here and to the DAG
version of this code in D51696 / D51433, so try to make those cases
as similar as possible to avoid bugs.
llvm-svn: 341545
There is no need to create preheaders in the analysis stage, we only
need them when adjusting the branches. Also, the only cases we need to
create our own preheaders is when they have more than 1 predecessors or
PHI nodes (even with only 1 predecessor, we could have an LCSSA phi
node). I have simplified the conditions and added some assertions to be
sure. Because we know the inner and outer loop need to be tightly
nested, it is sufficient to check if the inner loop preheader is the
outer loop header to check if we need to create a new preheader.
Reviewers: efriedma, mcrosier, karthikthecool
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D51703
llvm-svn: 341533
Add the __msan_va_arg_origin_tls TLS array to keep the origins for
variadic function parameters.
Change the instrumentation pass to store parameter origins in this array.
llvm-svn: 341528
Turns out that calling a variadic function with too many (e.g. >100 i64's)
arguments overflows __msan_va_arg_tls, which leads to smashing other TLS
data with function argument shadow values.
getShadow() already checks for kParamTLSSize and returns clean shadow if
the argument does not fit, so just skip storing argument shadow for such
arguments.
llvm-svn: 341525
Function rewriteLoopExitValues contains a check on isValidRewrite which
is needed to make sure that SCEV does not convert the pattern
`gep Base, (&p[n] - &p[0])` into `gep &p[n], Base - &p[0]`. This problem
has been fixed in SCEV long ago, so this check is just obsolete.
This patch converts it into an assertion to make sure that the SCEV will
not mess up this case in the future.
Differential Revision: https://reviews.llvm.org/D51582
Reviewed By: atrick
llvm-svn: 341516
The sum of the weights is caculated in an APInt, which has a width smaller than
64. In certain cases, the sum of the widths would overflow when calculations
are done inside an APInt, but would not if done with uint64_t. Since the
values will be passed as uint64_t in the function call anyways, do all the math
in 64 bits. Also added an assert in case the probabilities overflow 64 bits.
llvm-svn: 341444
I'm probably missing some way to use m_Deferred to remove the code
duplication, but that can be a follow-up.
The improvement in demand_shrink_nsw.ll is an example of missing
the fold because the pattern matching was deficient. I didn't try
to follow the bits in that test, but Alive says it's correct:
https://rise4fun.com/Alive/ugc
llvm-svn: 341426
Reland r341269. Use std::stable_sort when sorting constant condidates.
Reverting commit, r341365:
Revert r341269: [Constant Hoisting] Hoisting Constant GEP Expressions
One of the tests is failing 50% of the time when expensive checks are
enabled. Not sure how deep the problem is so just reverting while the
author can investigate so that the bots stop repeatedly failing and
blaming things incorrectly. Will respond with details on the original
commit.
Original commit, r341269:
[Constant Hoisting] Hoisting Constant GEP Expressions
Leverage existing logic in constant hoisting pass to transform constant GEP
expressions sharing the same base global variable. Multi-dimensional GEPs are
rewritten into single-dimensional GEPs.
https://reviews.llvm.org/D51396
Differential Revision: https://reviews.llvm.org/D51654
llvm-svn: 341417
This is fix for PR38786.
First order recurrence phis were incorrectly treated as uniform,
which caused them to be vectorized as uniform instructions.
Patch by Ayal Zaks and Orivej Desh!
Reviewed by: Anna
Differential Revision: https://reviews.llvm.org/D51639
llvm-svn: 341416
Sanjay Patel