This avoids a crash (with asserts) or bad codegen (without asserts)
in Dwarf streamer later on. This patch fixes this condition in
MCStreamer and propogates SMLoc down when it's available with an
added bonus of source locations for those specific types of errors.
Further patches could use similar improvements as currently most
non-Windows CFI directives lack an SMLoc parameter.
Modified an existing test to verify source location propogation and
added an object-file version of it to verify that it does not crash in
addition to a standalone test to only ensure it does not crash.
Differential Revision: https://reviews.llvm.org/D51695
llvm-svn: 344781
The following instruction:
> str q28, [x0, #1*6*4*@]
contains a @ which is parsed as an empty symbol. The parser returns true
but has no error, so the assembler continues by ignoring the
instruction.
Differential Revision: https://reviews.llvm.org/D52645
llvm-svn: 343961
The Lexer doesn't use this state itself. It is only set and used by AsmParser so it seems like it should just be part of AsmParser.
Differential Revision: https://reviews.llvm.org/D52515
llvm-svn: 343027
The main use case for this directive is to allow assembly writers to
write their own FPO data strings without going through the .cv_fpo*
directive family.
I'm experimenting with different RPN programs to fix PR38857, and I
figured I should go ahead and make this directive permanent.
llvm-svn: 341712
Summary:
For assembly input files, generate debug info even when the .file
directive is present, provided it does not include a file-number
argument. Fixes PR38695.
Reviewers: probinson, sidneym
Subscribers: aprantl, hiraditya, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D51315
llvm-svn: 340839
Summary:
Handle the case IDVal is an empty string.
This bug was uncovered by a LLVM MC Assembler Protocol Buffer
Fuzzer for the RISC-V assembly language.
Reviewers: rnk
Reviewed By: rnk
Subscribers: rnk, niravd, pcc, peter.smith, asb, grosbach, llvm-commits, bcain, kito-cheng, shiva0217, rogfer01, PkmX
Differential Revision: https://reviews.llvm.org/D50808
llvm-svn: 340678
Allow the comparison of x86 registers in the evaluation of assembler
directives. This generalizes and simplifies the extension from r334022
to catch another case found in the Linux kernel.
Reviewers: rnk, void
Reviewed By: rnk
Subscribers: hiraditya, nickdesaulniers, llvm-commits
Differential Revision: https://reviews.llvm.org/D50795
llvm-svn: 339895
This support was partial and temporary. Now that we have
wasm object file support its no longer needed.
Differential Revision: https://reviews.llvm.org/D48744
llvm-svn: 337222
DWARF v5 explicitly represents file #0 in the line table. Prior
versions did not, so ".loc 0" is still an error in those cases.
Differential Revision: https://reviews.llvm.org/D48452
llvm-svn: 335350
In some cases, for example when compiling a preprocessed file, the
front-end is not able to provide an MD5 checksum for all files. When
that happens, omit the MD5 checksums from the final DWARF, because
DWARF doesn't have a way to indicate that some but not all files have
a checksum.
When assembling a .s file, and some but not all .file directives
provide an MD5 checksum, issue a warning and don't emit MD5 into the
DWARF.
Fixes PR37623.
Differential Revision: https://reviews.llvm.org/D48135
llvm-svn: 334710
On targets like Arm some relaxations may only be performed when certain
architectural features are available. As functions can be compiled with
differing levels of architectural support we must make a judgement on
whether we can relax based on the MCSubtargetInfo for the function. This
change passes through the MCSubtargetInfo for the function to
fixupNeedsRelaxation so that the decision on whether to relax can be made
per function. In this patch, only the ARM backend makes use of this
information. We must also pass the MCSubtargetInfo to applyFixup because
some fixups skip error checking on the assumption that relaxation has
occurred, to prevent code-generation errors applyFixup must see the same
MCSubtargetInfo as fixupNeedsRelaxation.
Differential Revision: https://reviews.llvm.org/D44928
llvm-svn: 334078
Summary:
Allow extended parsing of variable assembler assignment syntax and modify X86 to permit
VAR = register assignment. As we emit these as .set directives when possible, we inline
such expressions in output assembly.
Fixes PR37425.
Reviewers: rnk, void, echristo
Reviewed By: rnk
Subscribers: nickdesaulniers, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D47545
llvm-svn: 334022
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Teach AsmParser to check with Assembler for when evaluating constant
expressions. This improves the handing of preprocessor expressions
that must be resolved at parse time. This idiom can be found as
assembling-time assertion checks in source-level assemblers. Note that
this relies on the MCStreamer to keep sufficient tabs on Section /
Fragment information which the MCAsmStreamer does not. As a result the
textual output may fail where the equivalent object generation would
pass. This can most easily be resolved by folding the MCAsmStreamer
and MCObjectStreamer together which is planned for in a separate
patch.
Currently, this feature is only enabled for assembly input, keeping IR
compilation consistent between assembly and object generation.
Reviewers: echristo, rnk, probinson, espindola, peter.smith
Reviewed By: peter.smith
Subscribers: eraman, peter.smith, arichardson, jyknight, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D45164
llvm-svn: 331218
This is a temporary solution until a proper WASM implementation of
MCAsmParserExtension is in place, but at least for now will unblock this
path.
Added test to make sure this path works with the WASM Assembler.
Patch By Wouter van Oortmerssen!
Differential Revision: https://reviews.llvm.org/D45386
llvm-svn: 330370
Previously the MD5 option of the .file directive provided the checksum
as a quoted hex string; now it's a normal hex number with 0x prefix,
same as the .octa directive accepts.
Differential Revision: https://reviews.llvm.org/D45459
llvm-svn: 329820
Summary:
The LLVM SourceMgr class (which is used indirectly by Swift, though not Clang)
has a routine for looking up line numbers of SMLocs. This routine uses a
shared, special-purpose cache that handles exactly one access pattern
efficiently: looking up the line number of an SMLoc that points into the same
buffer as the last query made to the SourceMgr, at a location in the buffer at
or ahead of the last query.
When this works it's fine, but when it fails it's catastrophic for performancer:
one recent out-of-order access from a Swift utility routine ran for tens of
seconds, spending 99% of its time repeatedly scanning buffers for '\n'.
This change removes the shared cache from the SourceMgr and installs a new
cache in each SrcBuffer. The per-SrcBuffer caches are also "full", in the sense
that rather than caching a single last-query pointer, they cache _all_ the
line-ending offsets, in a binary-searchable array, such that once it's
populated (on first access), all subsequent access patterns run at the same
speed.
Performance measurements I've done show this is actually a little bit faster on
real codebases (though only a couple fractions of a percent). Memory usage is
up by a few tens to hundreds of bytes per SrcBuffer that has a line lookup done
on it; I've attempted to minimize this by using dynamic selection of integer
sized when storing offset arrays. But the main motive here is to
make-impossible the cases we don't always see, that show up by surprise when
there is an out-of-order access pattern.
Reviewers: jordan_rose
Reviewed By: jordan_rose
Subscribers: probinson, llvm-commits
Differential Revision: https://reviews.llvm.org/D45003
llvm-svn: 329470
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
We emit the new syntax only for DWARF v5 and later.
Fixes the bug found by asan. Also XFAIL the new test for Darwin, which
is stuck on DWARF v2, and fix up other tests so they stop failing on
Windows. Last but not least, don't break "clang -g" of an assembler
file that has .file directives in it.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 328805
This reverts commit r328676.
Commit r328676 broke the -no-integrated-as flag necessary to build Linux kernel with Clang:
$ cat t.c
void foo() {}
$ clang -no-integrated-as -c t.c -g
/tmp/t-dcdec5.s: Assembler messages:
/tmp/t-dcdec5.s:8: Error: file number less than one
clang-7.0: error: assembler command failed with exit code 1 (use -v to see invocation)
llvm-svn: 328699
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
Fixes the bug found by asan. Also XFAIL the new test for Darwin, which
is stuck on DWARF v2, and fix up other tests so they stop failing on
Windows. Last but not least, don't break "clang -g" of an assembler
file that has .file directives in it.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 328676
We were effectively overriding an explicit '.file' directive with info
for the assembler source. That shouldn't happen.
Fixes PR36636, really, even for .s files emitted by Clang.
Differential Revision: https://reviews.llvm.org/D44265
llvm-svn: 328208
We were effectively overriding an explicit '.file' directive with info
for the assembler source. That shouldn't happen.
Fixes PR36636.
Differential Revision: https://reviews.llvm.org/D44265
llvm-svn: 327073
Fixes the bug found by asan. Also XFAIL the new test for Darwin,
which is stuck on DWARF v2, and fix up other tests so they stop
failing on Windows.
llvm-svn: 326839
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 326758
In DWARF v5 the Line Number Program Header is extensible, allowing values with
new content types. In this extension a content type is added,
DW_LNCT_LLVM_source, which contains the embedded source code of the file.
Add new optional attribute for !DIFile IR metadata called source which contains
source text. Use this to output the source to the DWARF line table of code
objects. Analogously extend METADATA_FILE in Bitcode and .file directive in ASM
to support optional source.
Teach llvm-dwarfdump and llvm-objdump about the new values. Update the output
format of llvm-dwarfdump to make room for the new attribute on file_names
entries, and support embedded sources for the -source option in llvm-objdump.
Differential Revision: https://reviews.llvm.org/D42765
llvm-svn: 325970
So that macros defined in inline assembly blocks are available to the
whole file.
This provides a consistent behavior with other assembly directives,
since equations for example are already preserved between inline
assembly blocks.
PR: 36110
Patch by Roger!
llvm-svn: 325139
Summary:
This adds a set of new directives that describe 32-bit x86 prologues.
The directives are limited and do not expose the full complexity of
codeview FPO data. They are merely a convenience for the compiler to
generate more readable assembly so we don't need to generate tons of
labels in CodeGen. If our prologue emission changes in the future, we
can change the set of available directives to suit our needs. These are
modelled after the .seh_ directives, which use a different format that
interacts with exception handling.
The directives are:
.cv_fpo_proc _foo
.cv_fpo_pushreg ebp/ebx/etc
.cv_fpo_setframe ebp/esi/etc
.cv_fpo_stackalloc 200
.cv_fpo_endprologue
.cv_fpo_endproc
.cv_fpo_data _foo
I tried to follow the implementation of ARM EHABI CFI directives by
sinking most directives out of MCStreamer and into X86TargetStreamer.
This helps avoid polluting non-X86 code with WinCOFF specific logic.
I used cdb to confirm that this can show locals in parent CSRs in a few
cases, most importantly the one where we use ESI as a frame pointer,
i.e. the one in http://crbug.com/756153#c28
Once we have cdb integration in debuginfo-tests, we can add integration
tests there.
Reviewers: majnemer, hans
Subscribers: aemerson, mgorny, kristof.beyls, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D38776
llvm-svn: 315513
This reverts commit 6389e7aa724ea7671d096f4770f016c3d86b0d54.
There is a bug in this implementation where the string value of the
checksum is outputted, instead of the actual hex bytes. Therefore the
checksum is incorrect, and this prevent pdbs from being loaded by visual
studio. Revert this until the checksum is emitted correctly.
llvm-svn: 313431
Summary:
The checksums had already been placed in the IR, this patch allows
MCCodeView to actually write it out to an MCStreamer.
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37157
llvm-svn: 313374
Kristina Brooks