There are two separate fixes here:
* The lowering code for non-extending loads should report UnableToLegalize instead of emitting the same instruction.
* The target should not be requesting lowering of non-extending loads.
llvm-svn: 331201
This prevents infinite recursion in DWARFDie::findRecursively for
malformed DWARF where a DIE references itself.
This fixes PR36257.
Differential revision: https://reviews.llvm.org/D43092
llvm-svn: 331200
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
Emit error messages instead of compiler crashing when the target region
does not exist in the device code + fix crash when the location comes
from macros.
llvm-svn: 331195
Code commonly checks if the parent DIE is DW_TAG_compile_unit.
But DW_TAG_partial_unit also acts as DW_TAG_compile_unit for DWZ
as DWZ is using DW_TAG_imported_unit only at the top unit level.
Differential revision: https://reviews.llvm.org/D40469
llvm-svn: 331194
This fixes PR37293.
We can have scheduling classes with no write latency entries, that still consume
processor resources. We don't want to treat those instructions as zero-latency
instructions; they still have to be issued to the underlying pipelines, so they
still consume resource cycles.
This is likely to be a regression which I have accidentally introduced at
revision 330807. Now, if an instruction has a non-empty set of write processor
resources, we conservatively treat it as a normal (i.e. non zero-latency)
instruction.
llvm-svn: 331193
In patterns where we need to specify a result VT, prefer
[(set (tr.vt tr.op:$V1), (operator ...))]
over
[(set tr.op:$V1, (tr.vt (operator ...)))]
This is NFC now, but simplifies some future changes.
llvm-svn: 331192
If we have LOCR instructions, select them directly from SelectionDAG
instead of first going through a pseudo instruction and then using
the custom inserter to emit the LOCR.
Provide Select pseudo-instructions for VR32/VR64 if we have vector
instructions, to avoid having to go through the first 16 FPRs
unnecessarily.
If we do not have LOCFHR, prefer using LOCR followed by a move
over a conditional branch.
llvm-svn: 331191
Summary:
This patch adds index support for GoToDefinition -- when we don't get the
definition from local AST, we query our index (Static&Dynamic) index to
get it.
Since we currently collect top-level symbol in the index, it doesn't support all
cases (e.g. class members), we will extend the index to include more symbols in
the future.
Reviewers: sammccall
Subscribers: klimek, ilya-biryukov, jkorous-apple, ioeric, MaskRay, cfe-commits
Differential Revision: https://reviews.llvm.org/D45717
llvm-svn: 331189
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
Summary:
This patch will introduce copying of DBG_VALUE instructions
from an otherwise empty basic block to predecessor/successor
blocks in case the empty block is eliminated/bypassed. It
is currently only done in one identified situation in the
BranchFolding pass, before optimizing on empty block.
It can be seen as a light variant of the propagation done
by the LiveDebugValues pass, which unfortunately is executed
after the BranchFolding pass.
We only propagate (copy) DBG_VALUE instructions in a limited
number of situations:
a) If the empty BB is the only predecessor of a successor
we can copy the DBG_VALUE instruction to the beginning of
the successor (because the DBG_VALUE instruction is always
part of the flow between the blocks).
b) If the empty BB is the only successor of a predecessor
we can copy the DBG_VALUE instruction to the end of the
predecessor (because the DBG_VALUE instruction is always
part of the flow between the blocks). In this case we add
the DBG_VALUE just before the first terminator (assuming
that the terminators do not impact the DBG_VALUE).
A future solution, to handle more situations, could perhaps
be to run the LiveDebugValues pass before branch folding?
This fix is related to PR37234. It is expected to resolve
the problem seen, when applied together with the fix in
SelectionDAG from here: https://reviews.llvm.org/D46129
Reviewers: #debug-info, aprantl, rnk
Reviewed By: #debug-info, aprantl
Subscribers: ormris, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D46184
llvm-svn: 331183
Summary:
When building the selection DAG at ISel all PHI nodes are
selected and lowered to Machine Instruction PHI nodes before
we start to create any SDNodes. So there are no SDNodes for
values produced by the PHI nodes.
In the past when selecting a dbg.value intrinsic that uses
the value produced by a PHI node we have been handling such
dbg.value intrinsics as "dangling debug info". I.e. we have
not created a SDDbgValue node directly, because there is
no existing SDNode for the PHI result, instead we deferred
the creationg of a SDDbgValue until we found the first use
of the PHI result.
The old solution had a couple of flaws. The position of the
selected DBG_VALUE instruction would end up quite late in a
basic block, and for example not directly after the PHI node
as in the LLVM IR input. And in case there were no use at all
in the basic block the dbg.value could be dropped completely.
This patch introduces a new VREG kind of SDDbgValue nodes.
It is similar to a SDNODE kind of node, but it refers directly
to a virtual register and not a SDNode. When we do selection
for a dbg.value that is using the result of a PHI node we
can do a lookup of the virtual register directly (as it already
is determined for the PHI node) and create a SDDbgValue node
immediately instead of delaying the selection until we find a
use.
This should fix a problem with losing debug info at ISel
as seen in PR37234 (https://bugs.llvm.org/show_bug.cgi?id=37234).
It does not resolve PR37234 completely, because the debug info
is dropped later on in the BranchFolder (see D46184).
Reviewers: #debug-info, aprantl
Reviewed By: #debug-info, aprantl
Subscribers: rnk, gbedwell, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46129
llvm-svn: 331182
This patch updates some code responsible the skip debug info to use
BasicBlock::instructionsWithoutDebug. I think this makes things
slightly simpler and more direct.
Reviewers: mkuper, rengolin, dcaballe, aprantl, vsk
Reviewed By: rengolin
Differential Revision: https://reviews.llvm.org/D46254
llvm-svn: 331174
ObjectFileELF assumes that code section has ".text" name. There is an
exception for kalimba toolchain that can use arbitrary names, but other
toolchains also could use arbitrary names for code sections. For
example, corert uses separate section for compiled managed code. As lldb
doesn't recognize such section it leads to problem with breakpoints on
arm, because debugger cannot determine instruction set (arm/thumb) and
uses incorrect breakpoint opcode that breaks program execution.
This change allows debugger to correctly handle such code sections. We
assume that section is a code section if it has SHF_EXECINSTR flag set
and has SHT_PROGBITS type.
Patch by Konstantin Baladurin <k.baladurin@partner.samsung.com>.
Differential Revision: https://reviews.llvm.org/D44998
llvm-svn: 331173
A typo in the patch (using syntax instead of m_syntax) resulted in the
normalization not working properly for windows filespecs when the syntax
was passed as host-native. This did not affect the unit tests, as all of
those pass an explicity syntax, but failed gloriously when running the
full test suite.
I also fix an expectation in an lldb-mi test, which was now failing
because it was expecting a path to be echoed verbatim, but we were now
normalizing it.
As a drive-by, this also fixes the default-in-fully-covered-switch
warning and removes an unused argument from the NeedsNormalization
function.
llvm-svn: 331172
The PMAXSD/PMINSD instregexs had been written as PMAX(C?)SD - looks like this was a search+replace error when matching float MAXSD/MINSD commutative instructions.
llvm-svn: 331167
Previously these instructions were unselectable and instead were generated
through the instruction mapping tables.
Reviewers: atanasyan, smaksimovic, abeserminji
Differential Revision: https://reviews.llvm.org/D46055
llvm-svn: 331165
Summary:
The getConstraintRegister method is used by semantic checking of
inline assembly statements in order to diagnose conflicts between
clobber list and input/output lists. Currently ARM and AArch64 don't
override getConstraintRegister, so conflicts between registers
assigned to variables in asm labels and clobber lists are not
diagnosed. Such conflicts can cause assertion failures in the back end
and even miscompilations.
This patch implements getConstraintRegister for ARM and AArch64
targets. Since these targets don't have single-register constraints,
the implementation is trivial and just returns the register specified
in an asm label (if any).
Reviewers: eli.friedman, javed.absar, thopre
Reviewed By: thopre
Subscribers: rengolin, eraman, rogfer01, myatsina, kristof.beyls, cfe-commits, chrib
Differential Revision: https://reviews.llvm.org/D45965
llvm-svn: 331164
The problem is reported in:
https://github.com/google/sanitizers/issues/945
We already disable as much as possible after multithreaded fork,
trace switching is last place that can hang due to basic
operations (memory accesses, function calls).
Disable it too.
llvm-svn: 331163
This patch extends the 'isSVEVectorRegWithShiftExtend' function to
improve diagnostics for SVE's gather load (scalar + vector) addressing
modes. Instead of always suggesting the 'unscaled' addressing mode,
the use of DiagnosticPredicate enables a more specific error message
in the context where the scaling is incorrect. For example:
ld1h z0.d, p0/z, [x0, z0.d, lsl #2]
^
shift amount should be '1'
Instead of suggesting the packed, unscaled addressing mode:
expected 'z[0..31].d, (uxtw|sxtw)'
the assembler now suggests using the proper scaling:
expected 'z[0..31].d, (lsl|uxtw|sxtw) #1'
Reviewers: fhahn, rengolin, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D46124
llvm-svn: 331162
The instructions have predicates of Not64BitMode, but there are identical strings in InstAliases that have Mode32Bit and Mode16Bit. But the ordering is uncontrolled and the less specific Not64BitMode was ordered first.
This patch hides the Not64BitMode from the table so there is no conflict anymore.
llvm-svn: 331158
When a '>>' token is split into two '>' tokens (in C++11 onwards), or (as an
extension) when we do the same for other tokens starting with a '>', we can't
just use a location pointing to the first '>' as the location of the split
token, because that would result in our miscomputing the length and spelling
for the token. As a consequence, for example, a refactoring replacing 'A<X>'
with something else would sometimes replace one character too many, and
similarly diagnostics highlighting a template-id source range would highlight
one character too many.
Fix this by creating an expansion range covering the first character of the
'>>' token, whose spelling is '>'. For this to work, we generalize the
expansion range of a macro FileID to be either a token range (the common case)
or a character range (used in this new case).
llvm-svn: 331155
These aliases are used to default the memory forms of call and jmp to the size of the operating mode. This doesn't work for Intel syntax. We have a different hack in the AsmParser code itself to force a size on unsized memory operands.
llvm-svn: 331153
Daniel Sanders