Previously, we added strings from DynamicSection::finalize().
It was a bit tricky because finalize() is supposed to fix the final
size of the section, but adding new strings would change the size of
.dynstr section. So there was a dependency between finalize functions
of .dynamic and .dynstr.
However, I noticed that we can elimiante the dependency by simply
add strings early; we don't have to do that in finalize() but can do
from DynamicSection's ctor.
This patch defines a new function, DynamicSection::addEntries, to
add .dynamic entries that doesn't depend on other sections.
llvm-svn: 285784
We are going to have many more classes for linker-synthesized
input sections, so it's worth to be added to a separate file
than to the file for regular input sections.
llvm-svn: 285740
Previously, we have a lot of BumpPtrAllocators, but all these
allocators virtually have the same lifetime because they are
not freed until the linker finishes its job. This patch aggregates
them into a single allocator.
Differential revision: https://reviews.llvm.org/D26042
llvm-svn: 285452
Instead of having 3 section allocators per file, have 3 for all files.
This is a substantial performance improvement for some cases. Linking
chromium without gc speeds up by 1.065x.
This requires using _exit in fatal since we have to avoid destructing
an InputSection if fatal is called from the constructor.
Thanks to Rui for the suggestion.
llvm-svn: 285290
When static linking in ARM (like Mips) __tls_get_addr is defined by
the library so we should not define it as a synthetic.
We also need to add __exidx_start and __exidx_end for the .ARM.exidx
section as the static libc library startup code is expecting them to
be defined by the default linker script for static linking on ARM.
Differential revision: https://reviews.llvm.org/D25978
llvm-svn: 285279
As the state of lld gets more complicated, shutting down gets more
expensive.
In a normal lld run we can just call _exit immediately after renaming
the temporary output file. We still want the ability to run a full
shutdown since that is useful for detecting memory leaks.
This patch adds a --full-shutdown flag and changes lit to use it.
llvm-svn: 285224
Instead of storing a pointer, store the members we need.
The reason for doing this is that it makes it far easier to create
synthetic sections. It also avoids reading data from files multiple
times., which might help with cross endian linking and host
architectures with slow unaligned access.
There are obvious compacting opportunities, but this already has mixed
results even on native x86_64 linking.
There is also the possibility of better refactoring the code for
handling common symbols, but this already shows that a custom class is
not necessary.
llvm-svn: 285148
We were fairly inconsistent as to what information should be accessed
with getSectionHdr and what information (like alignment) was stored
elsewhere.
Now all section info has a dedicated getter. The code is also a bit
more compact.
llvm-svn: 285079
We were previously using the (static) addSynthetic function to create
*_start/*_end symbols. This function was doing almost the same thing as
addOptionalSynthetic, except that it would also create the symbol in the
case where it is unreferenced. Because the symbol has hidden visibility,
creating it in that case would have no effect other than adding another
entry to the static symbol table. Remove addSynthetic and change callers to
use addOptionalSynthetic instead.
Differential Revision: https://reviews.llvm.org/D25545
llvm-svn: 285021
In this patch partial gdb_index section is created.
For costructing the .gdb_index section 6 steps should be performed (details are in
SplitDebugInfo.cpp file header), this patch do first 3:
Creates proper section header.
Fills list of compilation units.
Types CU list area is not supposed to be supported, so it is ignored and therefore
can be treated as implemented either.
Differential revision: https://reviews.llvm.org/D24706
llvm-svn: 284708
Previously, we were checking the existence of an entry symbol
too early. It was done before the linker script processor creates
symbols defined in scripts. Fixes bug 30743.
llvm-svn: 284676
This is 30646.
PT_OPENBSD_RANDOMIZE
The array element specifies the location and size of a part of the memory image of the program that must be filled with random data before any code in the object is executed. The memory region specified by a segment of this type may overlap the region specified by a PT_GNU_RELRO segment, in which case the intersection will be filled with random data before being marked read-only.
Reference links:
http://man.openbsd.org/OpenBSD-current/man5/elf.5c494713c45
Differential revision: https://reviews.llvm.org/D25469
llvm-svn: 284234
-z wxneeded creates a PHDR PT_OPENBSD_WXNEEDED.
PT_OPENBSD_WXNEEDED
The array element specifies that a process executing this file may need to be able to map or protect memory regions as simultaneously executable and writable. If the system is unable or unwilling to permit that for this executable then it may fail immediately. This segment type is meaningful only for executable files and is ignored in other objects.
http://man.openbsd.org/OpenBSD-current/man5/elf.5
Differential revision: https://reviews.llvm.org/D25472
llvm-svn: 284226
Previously we would fail to synthesise a __start_ or __stop_ symbol if
there existed a definition in a DSO. Instead, we would try to link against
the DSO definition. This became possible after D23552 when linking against
lld-produced DSOs but could in principle also occur when linking against
DSOs produced by other linkers.
Not only does it seem more likely that a user would expect the resolved
definition to be local to the executable, but if a __start_ or __stop_
symbol was synthesised by the linker, it is effectively impossible to link
against correctly from a non-PIC executable in a read-only section. Neither
a PLT nor a copy relocation would give us the right semantics here. The only
way the link could succeed is if the executable provided its own synthetic
definition of the symbol.
The fix is to also synthesise the definition if the only definition comes
from a DSO. Since this is what the addOptionalSynthetic function does,
switch to using that function.
Fixes PR30680.
Differential Revision: https://reviews.llvm.org/D25544
llvm-svn: 284168
Previously, we supported only SHF_COMPRESSED sections because it's
new and it's the ELF standard. But there are object files compressed
in the GNU style out there, so we had to support it.
Sections compressed in the GNU style start with ".zdebug_" and
contain different headers than the ELF standard's one. In this
patch, getRawCompressedData is responsible to handle it.
A tricky thing about GNU-style compressed sections is that we have
to rename them when creating output sections. ".zdebug_" prefix
implies the section is compressed. We need to rename ".zdebug_"
".debug" because our output sections are not compressed.
We do that in this patch.
llvm-svn: 284068
This part was splitted from D25016.
When sh_info value was set in the way that non-local symbol was treated as local, lld
was asserting, patch fixes that.
Differential revision: https://reviews.llvm.org/D25371
llvm-svn: 283859
Absolute local symbols with name staring from ".L" were reason of crash.
The same could happen when using some broken inputs found by AFL.
Patch fixes that.
Differential revision: https://reviews.llvm.org/D25365
llvm-svn: 283731
The .ARM.exidx sections contain a table. Each entry has two fields:
- PREL31 offset to the function the table entry describes
- Action to take, either cantunwind, inline unwind, or PREL31 offset to
.ARM.extab section
The table entries must be sorted in order of the virtual addresses the
first entry of the table describes. Traditionally this is implemented by
the SHF_LINK_ORDER dependency. Instead of implementing this directly we
sort the table entries post relocation.
The .ARM.exidx OutputSection is described by the PT_ARM_EXIDX program
header
Differential revision: https://reviews.llvm.org/D25127
llvm-svn: 283730
Since they end up going on the same PT_LOAD, there is no reason to
sort them. This matches bfd's behaviour and is user visible in the
placement of orphan sections.
llvm-svn: 282799
If there is not sufficient address space, just give up and don't put
the header in the PT_LOAD.
This matches bfd behaviour and I found at least one script that
depends on having a section at address 0.
llvm-svn: 282750
If we two sections reside in the same PT_LOAD segment,
we compute second section using the following formula:
Off2 = Off1 + VA2 - VA1. This allows OS kernel allocating
sections correctly when loading an image.
Differential revision: https://reviews.llvm.org/D25014
llvm-svn: 282705
This matches the behavior of Binutils linkers. We also change the
default MaxPageSize on x86-64 to 0x1000 to preserver the current
behavior, which is the same as the behavior implemented by gold.
https://llvm.org/bugs/show_bug.cgi?id=30541
Differential Revision: https://reviews.llvm.org/D24987
llvm-svn: 282560
If section contains local symbols ldd crashes, because local
symbols are added to symbol table before section is discarded
by linker script processor. This patch calls copyLocalSymbols()
after createSections, so discarded section symbols are not copied
llvm-svn: 282244
This reverts commit r282021, bringing back r282015.
The problem was that the comparison function was not a strict weak
ordering anymore, which this patch fixes.
Original message:
Only restrict order if both sections are in the script.
This matches gold and bfd behavior and is required to handle some scripts.
The script has to assume where PT_LOADs start in order to align that
spot. If we don't allow section it doesn't know about to move to the
middle, we can need more PT_LOADs and those will not be aligned.
llvm-svn: 282035
Linker scripts are responsible for aliging '.'. Since they are
designed for bfd which has no --rosegment, they don't align the RO to
RX transition.
llvm-svn: 281978
Rui Ueyama