I think these instructions used to be named differently and the regular expression reflected that. I guess we must have correct itinerary information that made this not matter for the scheduler test?
llvm-svn: 323305
There are a couple tricky things with this patch.
I had to add an override of isVectorLoadExtDesirable to stop DAG combine from combining sign_extend with loads after legalization since we legalize sextload using a load+sign_extend. Overriding this hook actually prevents a lot sextloads from being created in the first place.
I also had to add isel patterns because DAG combine blindly combines sign_extend+truncate to a smaller sign_extend which defeats what legalization was trying to do.
Differential Revision: https://reviews.llvm.org/D42407
llvm-svn: 323301
I don't know if the unused classes were intended to be used and that the VEX version is really different than the legacy SSE version. Agner's tables don't show any differences. I'm just cleaning up assuming the current behavior is correct.
llvm-svn: 323263
All other intrinsic instructions put the _Int on the end. This make these instructions consistent and gets the prefix instregexs in the scheduler models to pick them up.
llvm-svn: 323261
Minor refactor to make it possible for LowerBUILD_VECTORAsVariablePermute to be used with a wider variety of shuffles op and types.
I'd have liked to add v4i32/v4f32 support as well but we don't see v4i32 index extractions at the moment (which is why I created D42308)
After this I intend to begin adding scaling support for PSHUFB (v8i16, v4i32, v2i64)) and VPERMPS (v4f64, v4i64).
Differential Revision: https://reviews.llvm.org/D42431
llvm-svn: 323260
The existing code was already doing something very similar to subvector insertion so this allows us to remove the nearly duplicate code.
This patch is a little larger than it should be due to differences between the DQI handling between the two today.
llvm-svn: 323212
Summary:
For the most part its better to keep v32i1 as a mask type of a narrower width than trying to promote it to a ymm register.
I had to add some overrides to the methods that get the types for the calling convention so that we still use v32i8 for argument/return purposes.
There are still some regressions in here. I definitely saw some around shuffles. I think we probably should move vXi1 shuffle from lowering to a DAG combine where I think the extend and truncate we have to emit would be better combined.
I think we also need a DAG combine to remove trunc from (extract_vector_elt (trunc))
Overall this removes something like 13000 CHECK lines from lit tests.
Reviewers: zvi, RKSimon, delena, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42031
llvm-svn: 323201
I'm not sure there's any way to generate these folding cases especially the movzx ones since even the register form is never emitted by codegen.
I'm just adding them to remove the difference with the autogenerated version of the folding table.
llvm-svn: 323200
As detailed in rL317463, PSHUFB (like most variable shuffle instructions) uses Op[0] for the source vector and Op[1] for the shuffle index vector, VPERMV works in reverse which is probably where the confusion comes from.
Differential Revision: https://reviews.llvm.org/D42380
llvm-svn: 323190
Summary:
If we can match as a zero extend there's no need to flip the order to get an encoding benefit. As movzx is 3 bytes with independent source/dest registers. The shortest 'and' we could make is also 3 bytes unless we get lucky in the register allocator and its on AL/AX/EAX which have a 2 byte encoding.
This patch was more impressive before r322957 went in. It removed some of the same Ands that got deleted by that patch.
Reviewers: spatel, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42313
llvm-svn: 323175
Some of the NOREX instructions are used in 32-bit mode making this printing confusing. It also doesn't provide a lot of value since you can see the h-register being used by the instruction.
llvm-svn: 323174
Add missing patterns for inserting v1i1 into a zero vector. Use insert_subvector to zero upper bits before inserting an element into a vXi1 vector. Replace kshift based isel pattern with insert_subvector based pattern now that code that caused the pattern has been fixed to emit insert_subvector.
llvm-svn: 323173
Summary:
First, we need to explain the core of the vulnerability. Note that this
is a very incomplete description, please see the Project Zero blog post
for details:
https://googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html
The basis for branch target injection is to direct speculative execution
of the processor to some "gadget" of executable code by poisoning the
prediction of indirect branches with the address of that gadget. The
gadget in turn contains an operation that provides a side channel for
reading data. Most commonly, this will look like a load of secret data
followed by a branch on the loaded value and then a load of some
predictable cache line. The attacker then uses timing of the processors
cache to determine which direction the branch took *in the speculative
execution*, and in turn what one bit of the loaded value was. Due to the
nature of these timing side channels and the branch predictor on Intel
processors, this allows an attacker to leak data only accessible to
a privileged domain (like the kernel) back into an unprivileged domain.
The goal is simple: avoid generating code which contains an indirect
branch that could have its prediction poisoned by an attacker. In many
cases, the compiler can simply use directed conditional branches and
a small search tree. LLVM already has support for lowering switches in
this way and the first step of this patch is to disable jump-table
lowering of switches and introduce a pass to rewrite explicit indirectbr
sequences into a switch over integers.
However, there is no fully general alternative to indirect calls. We
introduce a new construct we call a "retpoline" to implement indirect
calls in a non-speculatable way. It can be thought of loosely as
a trampoline for indirect calls which uses the RET instruction on x86.
Further, we arrange for a specific call->ret sequence which ensures the
processor predicts the return to go to a controlled, known location. The
retpoline then "smashes" the return address pushed onto the stack by the
call with the desired target of the original indirect call. The result
is a predicted return to the next instruction after a call (which can be
used to trap speculative execution within an infinite loop) and an
actual indirect branch to an arbitrary address.
On 64-bit x86 ABIs, this is especially easily done in the compiler by
using a guaranteed scratch register to pass the target into this device.
For 32-bit ABIs there isn't a guaranteed scratch register and so several
different retpoline variants are introduced to use a scratch register if
one is available in the calling convention and to otherwise use direct
stack push/pop sequences to pass the target address.
This "retpoline" mitigation is fully described in the following blog
post: https://support.google.com/faqs/answer/7625886
We also support a target feature that disables emission of the retpoline
thunk by the compiler to allow for custom thunks if users want them.
These are particularly useful in environments like kernels that
routinely do hot-patching on boot and want to hot-patch their thunk to
different code sequences. They can write this custom thunk and use
`-mretpoline-external-thunk` *in addition* to `-mretpoline`. In this
case, on x86-64 thu thunk names must be:
```
__llvm_external_retpoline_r11
```
or on 32-bit:
```
__llvm_external_retpoline_eax
__llvm_external_retpoline_ecx
__llvm_external_retpoline_edx
__llvm_external_retpoline_push
```
And the target of the retpoline is passed in the named register, or in
the case of the `push` suffix on the top of the stack via a `pushl`
instruction.
There is one other important source of indirect branches in x86 ELF
binaries: the PLT. These patches also include support for LLD to
generate PLT entries that perform a retpoline-style indirection.
The only other indirect branches remaining that we are aware of are from
precompiled runtimes (such as crt0.o and similar). The ones we have
found are not really attackable, and so we have not focused on them
here, but eventually these runtimes should also be replicated for
retpoline-ed configurations for completeness.
For kernels or other freestanding or fully static executables, the
compiler switch `-mretpoline` is sufficient to fully mitigate this
particular attack. For dynamic executables, you must compile *all*
libraries with `-mretpoline` and additionally link the dynamic
executable and all shared libraries with LLD and pass `-z retpolineplt`
(or use similar functionality from some other linker). We strongly
recommend also using `-z now` as non-lazy binding allows the
retpoline-mitigated PLT to be substantially smaller.
When manually apply similar transformations to `-mretpoline` to the
Linux kernel we observed very small performance hits to applications
running typical workloads, and relatively minor hits (approximately 2%)
even for extremely syscall-heavy applications. This is largely due to
the small number of indirect branches that occur in performance
sensitive paths of the kernel.
When using these patches on statically linked applications, especially
C++ applications, you should expect to see a much more dramatic
performance hit. For microbenchmarks that are switch, indirect-, or
virtual-call heavy we have seen overheads ranging from 10% to 50%.
However, real-world workloads exhibit substantially lower performance
impact. Notably, techniques such as PGO and ThinLTO dramatically reduce
the impact of hot indirect calls (by speculatively promoting them to
direct calls) and allow optimized search trees to be used to lower
switches. If you need to deploy these techniques in C++ applications, we
*strongly* recommend that you ensure all hot call targets are statically
linked (avoiding PLT indirection) and use both PGO and ThinLTO. Well
tuned servers using all of these techniques saw 5% - 10% overhead from
the use of retpoline.
We will add detailed documentation covering these components in
subsequent patches, but wanted to make the core functionality available
as soon as possible. Happy for more code review, but we'd really like to
get these patches landed and backported ASAP for obvious reasons. We're
planning to backport this to both 6.0 and 5.0 release streams and get
a 5.0 release with just this cherry picked ASAP for distros and vendors.
This patch is the work of a number of people over the past month: Eric, Reid,
Rui, and myself. I'm mailing it out as a single commit due to the time
sensitive nature of landing this and the need to backport it. Huge thanks to
everyone who helped out here, and everyone at Intel who helped out in
discussions about how to craft this. Also, credit goes to Paul Turner (at
Google, but not an LLVM contributor) for much of the underlying retpoline
design.
Reviewers: echristo, rnk, ruiu, craig.topper, DavidKreitzer
Subscribers: sanjoy, emaste, mcrosier, mgorny, mehdi_amini, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D41723
llvm-svn: 323155
Primarily, this allows us to use the aggressive extraction mechanisms in combineExtractWithShuffle earlier and make use of UNDEF elements that may be lost during lowering.
Reapplied after rL322279 was reverted at rL322335 due to PR35918, underlying issue was fixed at rL322644.
llvm-svn: 323104
1. ReachingDefsAnalysis - Allows to identify for each instruction what is the “closest” reaching def of a certain register. Used by BreakFalseDeps (for clearance calculation) and ExecutionDomainFix (for arbitrating conflicting domains).
2. ExecutionDomainFix - Changes the variant of the instructions in order to minimize domain crossings.
3. BreakFalseDeps - Breaks false dependencies.
4. LoopTraversal - Creatws a traversal order of the basic blocks that is optimal for loops (introduced in revision L293571). Both ExecutionDomainFix and ReachingDefsAnalysis use this to determine the order they will traverse the basic blocks.
This also included the following changes to ExcecutionDepsFix original logic:
1. BreakFalseDeps and ReachingDefsAnalysis logic no longer restricted by a register class.
2. ReachingDefsAnalysis tracks liveness of reg units instead of reg indices into a given reg class.
Additional changes in affected files:
1. X86 and ARM targets now inherit from ExecutionDomainFix instead of ExecutionDepsFix. BreakFalseDeps also was added to the passes they activate.
2. Comments and references to ExecutionDepsFix replaced with ExecutionDomainFix and BreakFalseDeps, as appropriate.
Additional refactoring changes will follow.
This commit is (almost) NFC.
The only functional change is that now BreakFalseDeps will break dependency for all register classes.
Since no additional instructions were added to the list of instructions that have false dependencies, there is no actual change yet.
In a future commit several instructions (and tests) will be added.
This is the first of multiple patches that fix bugzilla https://bugs.llvm.org/show_bug.cgi?id=33869
Most of the patches are intended at refactoring the existent code.
Additional relevant reviews:
https://reviews.llvm.org/D40331https://reviews.llvm.org/D40332https://reviews.llvm.org/D40333https://reviews.llvm.org/D40334
Differential Revision: https://reviews.llvm.org/D40330
Change-Id: Icaeb75e014eff96a8f721377783f9a3e6c679275
llvm-svn: 323087
Summary:
This patch adds an implementation of targetShrinkDemandedConstant that tries to keep shrinkdemandedbits from removing bits that would otherwise have been recognized as a movzx.
We still need a follow patch to stop moving ands across srl if the and could be represented as a movzx before the shift but not after. I think this should help with some of the cases that D42088 ended up removing during isel.
Reviewers: spatel, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42265
llvm-svn: 323048
This change applies to places where we would turn 128/256-bit code into 512-bit in order to get a wider element type through sext/zext. Any 512-bit types that already existed in the IR/DAG will be left that way.
The width preference has no effect on codegen behavior when the target does not have AVX512 enabled. So AVX/AVX2 codegen cannot be limited via this mechanism yet.
If the preference is lower than 256 we may still use a 256 bit type to do the operation. Constraining to 128 bits makes it much more difficult to support some operations. For many of these cases we need to change element width while keeping element count constant which is easiest done by switching between 256 and 128 bit.
The preference is only obeyed when AVX512 and VLX are available. This means the preference is not obeyed for KNL, but is obeyed for SKX, Cannonlake, and Icelake. For KNL, the only way to do masked operation is on 512-bit registers so we would have to completely disable masking to obey the preference. We would also lose support for gather, scatter, ctlz, vXi64 multiplies, etc. This may change in the future, but this simplifies the initial implementation.
Differential Revision: https://reviews.llvm.org/D41895
llvm-svn: 323016
This will cause the vectorizers to do some limiting of the vector widths they create. This is not a strict limit. There are reasons I know of that the loop vectorizer will generate larger vectors for.
I've written this in such a way that the interface will only return a properly supported width(0/128/256/512) even if the attribute says something funny like 384 or 10.
This has been split from D41895 with the remainder in a follow up commit.
llvm-svn: 323015
Try to reverse the constant-shrinking that happens in SimplifyDemandedBits()
for 'and' masks when it results in a smaller sign-extended immediate.
We are also able to detect dead 'and' ops here (the mask is all ones). In
that case, we replace and return without selecting the 'and'.
Other targets might want to share some of this logic by enabling this under a
target hook, but I didn't see diffs for simple cases with PowerPC or AArch64,
so they may already have some specialized logic for this kind of thing or have
different needs.
This should solve PR35907:
https://bugs.llvm.org/show_bug.cgi?id=35907
Differential Revision: https://reviews.llvm.org/D42088
llvm-svn: 322957
This adds a new instrinsic to support the rdpid instruction. The implementation is a bit weird because the intrinsic is defined as always returning 32-bits, but the assembler support thinks the instruction produces a 64-bit register in 64-bit mode. But really it zeros the upper 32 bits. So I had to add separate patterns where 64-bit mode uses an extract_subreg.
Differential Revision: https://reviews.llvm.org/D42205
llvm-svn: 322910
Every known PE COFF target emits /EXPORT: linker flags into a .drective
section. The AsmPrinter should handle this.
While we're at it, use global_values() and emit each export flag with
its own .ascii directive. This should make the .s file output more
readable.
llvm-svn: 322788
Most are just replaced with instrs lists, but a few regexps have been further generalized to match more instructions with a single pattern.
llvm-svn: 322734
If we are splatting pairs of 32-bit elements, we can use a 64-bit broadcast to get the job done.
We could probably could probably do this with other sizes too, for example four 16-bit elements. Or we could broadcast pairs of 16-bit elements using a 32-bit element broadcast. But I've left that as a future improvement.
I've also restricted this to AVX2 only because we can only broadcast loads under AVX.
Differential Revision: https://reviews.llvm.org/D42086
llvm-svn: 322730
We legalize selects of masks with scalar conditions using a bitcast to an integer type. But if we are in 32-bit mode we can't convert v64i1 to i64. So instead split the v64i1 to v32i1 and concat it back together. Each half will then be legalized by bitcasting to i32 which is fine.
The test case is a little indirect. If we have the v64i1 select in IR it will get legalized by legalize vector ops which has a run of type legalization after it. That type legalization run is able to fix this i64 bitcast. So in order to avoid that we need a build_vector of a splat which legalize vector ops will ignore. Legalize DAG will then turn that into a select via LowerBUILD_VECTORvXi1. And the select will get legalized. In this case there is no type legalizer run to cleanup the bitcast.
This fixes pr35972.
llvm-svn: 322724
The match* functions have the annoying behavior of modifying its inputs.
Save and restore the inputs, just in case the early out for AVX512 is
hit. This is still not great and its only a matter of time this kind of
bug happens again, but I couldn't come up with a better pattern without
rewriting significant chunks of this code. Fixes PR35977.
llvm-svn: 322644
Prior to this we had a separate instruction and register class that excluded eax to prevent matching the instruction that would encode with 0x90.
This patch changes this to just use an InstAlias to force xchgl %eax, %eax to use XCHG32rr instruction in 64-bit mode. This gets rid of the separate instruction and register class.
llvm-svn: 322532
As mentioned on PR35869, (and came up recently on D41517) we don't create a MMX zero register via the PXOR but instead perform a spill to stack from a XMM zero register.
This patch adds support for direct MMX zero vector creation and should make it easier to add better constant vector creation in the future as well.
Differential Revision: https://reviews.llvm.org/D41908
llvm-svn: 322525
Add support for custom execution domain fixing and implement support for BLENDPD/BLENDPS/PBLENDD/PBLENDW.
Differential Revision: https://reviews.llvm.org/D42042
llvm-svn: 322524
Summary:
For example, VSQRTSDZr and VSQRTSSZr were missing the predicate.
Also fix braces indentation and braces for consistency.
Reviewers: craig.topper, RKSimon
Suscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41983
llvm-svn: 322478
We have to take special care to avoid the cases where the result of the truncate would be padded with zero elements.
Ideally we'd just use ISD::TRUNCATE for these cases instead.
llvm-svn: 322454
Extend vXi1 conditions of vXi8/vXi16 selects even before type legalization gets a chance to split wide vectors. Previously we would only extend 128 and 256 bit vectors. But if we start with a 512 bit vector or wider that needs to be split we wouldn't extend until after the split had taken place. By extending early we improve the results of type legalization.
Don't widen condition of 128/256 bit vXi16/vXi8 selects when we have BWI but not VLX. We can still use a mask register by widening the select to 512-bits instead. This is similar to what we do for compares already.
llvm-svn: 322450
In addition to the existing match as part of a loop-reduction, add a
straightforward pattern match for DAG-contained patterns.
Reviewers: RKSimon, craig.topper
Subscribers: llvm-commits
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D41811
llvm-svn: 322446
This avoids having the result type stick around until lowering where we have to extend the setcc and insert a truncate. If we get the types converted early we can do more to optimize it.
llvm-svn: 322432
Without a register with a size being mentioned the instruction is ambiguous in at&t syntax. With Intel syntax the memory operation caries a size that can be used to disambiguate.
llvm-svn: 322356
While the suffix isn't required to disambiguate the instructions, it is required in order to parse the instructions when the suffix is specified in order to match the GNU assembler.
llvm-svn: 322354
Summary: This is a preparatory step for D41811: refactoring code for breaking vector operands of binary operation to legal-types.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41925
llvm-svn: 322296
Primarily, this allows us to use the aggressive extraction mechanisms in combineExtractWithShuffle earlier and make use of UNDEF elements that may be lost during lowering.
llvm-svn: 322279
Summary:
As RKSimon suggested in pr35820, in the case that Src is smaller in
bit-size than Indices, need to widen Src to avoid type mismatch.
Fixes pr35820
Reviewers: RKSimon, craig.topper
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41865
llvm-svn: 322272
If the index is v2i64 we can use the scatter instruction that has v4i32/v4f32 data register, v2i64 index, and v2i1 mask. Similar was already done for gather.
Implement custom widening for v2i32 data to remove the code that reverses type legalization during lowering.
llvm-svn: 322254
After D41349, we can no get a MCSubtargetInfo into the MCAsmBackend constructor. This allows us to get NOPL from a subtarget feature rather than a CPU name blacklist.
Differential Revision: https://reviews.llvm.org/D41721
llvm-svn: 322227
Currently we infer the scale at isel time by analyzing whether the base is a constant 0 or not. If it is we assume scale is 1, else we take it from the element size of the pass thru or stored value. This seems a little weird and I think it makes more sense to make it explicit in the DAG rather than doing tricky things in the backend.
Most of this patch is just making sure we copy the scale around everywhere.
Differential Revision: https://reviews.llvm.org/D40055
llvm-svn: 322210
Summary:
If the vector type is transformed to non-vector single type, the compile
may crash trying to get vector information about non-vector type.
Reviewers: RKSimon, spatel, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41862
llvm-svn: 322106
Normally target independent DAG combine would do this combine based on getSetCCResultType, but with VLX getSetCCResultType returns a vXi1 type preventing the DAG combining from kicking in.
But doing this combine can allow us to remove the explicit sign extend that would otherwise be emitted.
This patch adds a target specific DAG combine to combine the sext+setcc when the result type is the same size as the input to the setcc. I've restricted this to FP compares and things that can be represented with PCMPEQ and PCMPGT since we don't have full integer compare support on the older ISAs.
Differential Revision: https://reviews.llvm.org/D41850
llvm-svn: 322101
CET (Control-Flow Enforcement Technology) introduces a new mechanism called IBT (Indirect Branch Tracking).
According to IBT, each Indirect branch should land on dedicated ENDBR instruction (End Branch).
The new pass adds ENDBR instructions for every indirect jmp/call (including jumps using jump tables / switches).
For more information, please see the following:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
Differential Revision: https://reviews.llvm.org/D40482
Change-Id: Icb754489faf483a95248f96982a4e8b1009eb709
llvm-svn: 322062
The code that checks the immediate wasn't masking to the lower 3-bits like the code in X86InstrInfo.cpp that's used by the peephole pass does.
llvm-svn: 322060
I had to drop fast-isel-abort from a test because we can't fast isel some of the mask stuff. When we used intrinsics we implicitly fell back to SelectionDAG for the intrinsic call without triggering the abort error. But with native IR that doesn't happen the same way.
llvm-svn: 322050
The pattern was this
def : Pat<(i32 (zext (i8 (bitconvert (v8i1 VK8:$src))))),
(MOVZX32rr8 (EXTRACT_SUBREG (i32 (COPY_TO_REGCLASS VK8:$src, GR32)), sub_8bit))>, Requires<[NoDQI]>;
but if you just let (i32 (zext X)) match byte itself you'll get MOVZX32rr8. And if you let (i8 (bitconvert (v8i1 VK8:$src))) match by itself you'll get (EXTRACT_SUBREG (i32 (COPY_TO_REGCLASS VK8:$src, GR32)), sub_8bit).
So we can just let isel do the two patterns naturally.
llvm-svn: 322049
This commit does two things. Firstly, it adds a collection of flags which can
be passed along to the target to encode information about the MBB that an
instruction lives in to the outliner.
Second, it adds some of those flags to the AArch64 outliner in order to add
more stack instructions to the list of legal instructions that are handled
by the outliner. The two flags added check if
- There are calls in the MachineBasicBlock containing the instruction
- The link register is available in the entire block
If the link register is available and there are no calls, then a stack
instruction can always be outlined without fixups, regardless of what it is,
since in this case, the outliner will never modify the stack to create a
call or outlined frame.
The motivation for doing this was checking which instructions are most often
missed by the outliner. Instructions like, say
%sp<def> = ADDXri %sp, 32, 0; flags: FrameDestroy
are very common, but cannot be outlined in the case that the outliner might
modify the stack. This commit allows us to outline instructions like this.
llvm-svn: 322048
(Target)FrameLowering::determineCalleeSaves can be called multiple
times. I don't think it should have side-effects as creating stack
objects and setting global MachineFunctionInfo state as it is doing
today (in other back-ends as well).
This moves the creation of stack objects from determineCalleeSaves to
assignCalleeSavedSpillSlots.
Differential Revision: https://reviews.llvm.org/D41703
llvm-svn: 321987
I had removed the qualifiers around the autogenerated folding table so I could compare with the manual table, but didn't intend to commit the change.
llvm-svn: 321971
Summary:
There are few oddities that occur due to v1i1, v8i1, v16i1 being legal without v2i1 and v4i1 being legal when we don't have VLX. Particularly during legalization of v2i32/v4i32/v2i64/v4i64 masked gather/scatter/load/store. We end up promoting the mask argument to these during type legalization and then have to widen the promoted type to v8iX/v16iX and truncate it to get the element size back down to v8i1/v16i1 to use a 512-bit operation. Since need to fill the upper bits of the mask we have to fill with 0s at the promoted type.
It would be better if we could just have the v2i1/v4i1 types as legal so they don't undergo any promotion. Then we can just widen with 0s directly in a k register. There are no real v4i1/v2i1 instructions anyway. Everything is done on a larger register anyway.
This also fixes an issue that we couldn't implement a masked vextractf32x4 from zmm to xmm properly.
We now have to support widening more compares to 512-bit to get a mask result out so new tablegen patterns got added.
I had to hack the legalizer for widening the operand of a setcc a bit so it didn't try create a setcc returning v4i32, extract from it, then try to promote it using a sign extend to v2i1. Now we create the setcc with v4i1 if the original setcc's result type is v2i1. Then extract that and don't sign extend it at all.
There's definitely room for improvement with some follow up patches.
Reviewers: RKSimon, zvi, guyblank
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41560
llvm-svn: 321967
The instructions that load 64-bits or an xmm register should be TB_NO_REVERSE to avoid the load being widened during unfold. The instructions that load 128-bits need to ensure 128-bit alignment.
llvm-svn: 321956
The memory form of the xmm->xmm version only writes 64-bits. If we use it in the folding tables and its get used for a stack spill, only half the slot will be written. Then a reload may read all 128-bits which will pull in garbage. But without the spill the upper bits of the register would have been zero. By not folding we would preserve the zeros.
llvm-svn: 321950
We don't do fine grained feature control like this on features prior to AVX512.
We do still have checks in place in the assembly parser itself that prevents %zmm references or %xmm16-31 from being parsed without at least -mattr=avx512f. Same for rounding control and mask operands. That will prevent the table matcher from matching for any instructions that need those features and that's probably good enough.
llvm-svn: 321947
This is the last step needed to fix PR33325:
https://bugs.llvm.org/show_bug.cgi?id=33325
We're trading branch and compares for loads and logic ops.
This makes the code smaller and hopefully faster in most cases.
The 24-byte test shows an interesting construct: we load the trailing scalar
elements into vector registers and generate the same pcmpeq+movmsk code that
we expected for a pair of full vector elements (see the 32- and 64-byte tests).
Differential Revision: https://reviews.llvm.org/D41714
llvm-svn: 321934
Without this we allow "vmovd %rax, %xmm0", but not "vmovd %rax, %xmm16"
This exists due to continue a silly bug where really old versions of the GNU assembler required movd instead of movq on these instructions. This compatibility hack then crept forward to avx version too, but we didn't propagate it to avx512.
llvm-svn: 321903
This behavior existed to work with an old version of the gnu assembler on MacOS that only accepted this form. Newer versions of GNU assembler and the current LLVM derived version of the assembler on MacOS support movq as well.
llvm-svn: 321898
This custom inserter was added in r124272 at which time it added about bunch of Defs for Win64. In r150708, those defs were removed leaving only the "return BB". So I think this means the custom inserter is a NOP these days.
This patch removes the remaining code and stops tagging the instructions for custom insertion
Differential Revision: https://reviews.llvm.org/D41671
llvm-svn: 321747
Currently we use SIGN_EXTEND in lowerMasksToReg as part of calling convention setup, but we don't require a specific value for the upper bits.
This patch changes it to ANY_EXTEND which will be lowered as SIGN_EXTEND if it ends up sticking around.
llvm-svn: 321746
Currently it's not possible to access MCSubtargetInfo from a TgtMCAsmBackend.
D20830 threaded an MCSubtargetInfo reference through
MCAsmBackend::relaxInstruction, but this isn't the only function that would
benefit from access. This patch removes the Triple and CPUString arguments
from createMCAsmBackend and replaces them with MCSubtargetInfo.
This patch just changes the interface without making any intentional
functional changes. Once in, several cleanups are possible:
* Get rid of the awkward MCSubtargetInfo handling in ARMAsmBackend
* Support 16-bit instructions when valid in MipsAsmBackend::writeNopData
* Get rid of the CPU string parsing in X86AsmBackend and just use a SubtargetFeature for HasNopl
* Emit 16-bit nops in RISCVAsmBackend::writeNopData if the compressed instruction set extension is enabled (see D41221)
This change initially exposed PR35686, which has since been resolved in r321026.
Differential Revision: https://reviews.llvm.org/D41349
llvm-svn: 321692
This is an extension of D31156 with the goal that we'll allow memcmp() == 0 expansion
for x86 to use 2 pairs of loads per block.
The memcmp expansion pass (formerly part of CGP) will generate this kind of pattern
with oversized integer compares, so we want to transform these into x86-specific vector
nodes before legalization splits things into scalar chunks.
See PR33325 for more details:
https://bugs.llvm.org/show_bug.cgi?id=33325
Differential Revision: https://reviews.llvm.org/D41618
llvm-svn: 321656
Currently the promotion for these ignores the normal getTypeToPromoteTo and instead just tries to double the element width. This is because the default behavior of getTypeToPromote to just adds 1 to the SimpleVT, which has the affect of increasing the element count while keeping the scalar size the same.
If multiple steps are required to get to a legal operation type, int_to_fp will be promoted multiple times. And fp_to_int will keep trying wider types in a loop until it finds one that works.
getTypeToPromoteTo does have the ability to query a promotion map to get the type and not do the increasing behavior. It seems better to just let the target specify the promotion type in the map explicitly instead of letting the legalizer iterate via widening.
FWIW, it's worth I think for any other vector operations that need to be promoted, we have to specify the type explicitly because the default behavior of getTypeToPromote isn't useful for vectors. The other types of promotion already require either the element count is constant or the total vector width is constant, but neither happens by incrementing the SimpleVT enum.
Differential Revision: https://reviews.llvm.org/D40664
llvm-svn: 321629
We can use zmm move with zero masking for this. We already had patterns for using a masked move, but we didn't check for the zero masking case separately.
llvm-svn: 321612
The CONCAT_VECTORS will be lowered to INSERT_SUBVECTOR later. In the modified cases this seems to be enough to trick a later DAG combine into running in a different order than allows the ANDs to be removed.
I'll admit this is a bit of a hack that happens to work, but using CONCAT_VECTORS is more consistent with other legalization code anyway.
llvm-svn: 321611
Don't combine buildvector(binop(),binop(),binop(),binop()) -> binop(buildvector(), buildvector()) if its a splat - keep the binop scalar and just splat the result to avoid large vector constants.
llvm-svn: 321607
We end up using an i8 load via an isel pattern from v8i1 anyway. This just makes it more explicit. This seems to improve codgen in some cases and I'd like to kill off some of the load patterns.
llvm-svn: 321598
As noted in PR34686, we are relying on a PSHUFD+PSHUFLW+PSHUFHW shuffle chain for most general vXi16 unary shuffles.
This patch checks for simpler PSHUFLW+PSHUFD and PSHUFHW+PSHUFD cases beforehand, building on some existing code that just handled splat shuffles.
By doing so we also prevent premature use of PSHUFB shuffles which can be slower and require the creation/loading of constant shuffle masks.
We now have the 'fast-variable-shuffle' option for hardware that prefers combining 2 or more shuffles to VPSHUFB etc.
Differential Revision: https://reviews.llvm.org/D38318
llvm-svn: 321553
Previously we used an extend from v8i1 to v8i32/v8i64. Then extracted to the final width. But if we have VLX we should extract first. This way we don't end up with an overly large extend.
This allows us to use vcmpeq to make all ones for the sign extend when DQI isn't available. Otherwise we get a VPTERNLOG.
If we make v2i1/v4i1 legal like proposed in D41560, we could always do this and rely on the lowering of the extend to widen when necessary.
llvm-svn: 321538
-Use MinAlign instead of std::min.
-Use SelectionDAG::getMemBasePlusOffset.
-Apply offset to the pointer info for the second load/store created.
llvm-svn: 321536
The exception handler thunk needs to reference the LSDA of the parent
function, which won't be emitted if it's available_externally.
Fixes PR35736. ThinLTO ends up producing available_externally functions
that use _CxxFrameHandler3.
llvm-svn: 321532
If there are 17 or more leading zeros to the v4i32 elements, then we can use PMADD for the integer multiply when PMULLD is unavailable or slow.
The 17 bits need to be zero as the PMADDWD performs a v8i16 signed-mul-extend + pairwise-add - the upper 16 so we're adding a zero pair and the 17th bit so we don't incorrectly sign extend.
Differential Revision: https://reviews.llvm.org/D41484
llvm-svn: 321516
My original implementation ran as a DAG combine post type legalization, but it turns out we don't run that DAG combine step if type legalization didn't change anything. Attempts to make the combine run before type legalization as well hit other issues.
So just do it in LowerMUL where we can catch more cases.
llvm-svn: 321496
Returning SDValue() means nothing changed, SDValue(N,0) means there was a change but the worklist management was taken care of.
I don't know if this has a real effect other than making sure the combine counter in the DAG combiner gets updated, but it is the correct thing to do.
llvm-svn: 321463
Normally we catch this during lowering, but vXi64 mul is considered legal when we have AVX512DQ.
This DAG combine allows us to avoid PMULLQ with AVX512DQ if we can prove its unnecessary. PMULLQ is 3 uops that take 4 cycles each. While pmuldq/pmuludq is only one 4 cycle uop.
llvm-svn: 321437
Match regular x87 memory fold instructions with load/sideeffects tags, to prevent the schedulers from re-ordering them across the fnstcw/fldcw sequences for truncating stores while they are still pseudo during the stack conversion pass.
llvm-svn: 321424
Previously we extended v2i1 to v2f64 and then tried to use cvtuqq2pd/cvtqq2pd, but that only works with avx512dq. So we ended up scalarizing it. Now we widen to v4i1 first and extend to v4i32.
llvm-svn: 321420
Immediately after it is created we check if its equal to another EVT. Then we inconsistently use one or the other variables in the code below.
Instead do the equality check directly on the getValueType result and remove the variable. Use the origina VT variable throughout the remaining code.
llvm-svn: 321406
getOperand returns an SDValue that contains the node and the result number. There is no guarantee that the result number if 0. By using the -> operator we are calling SDNode::getValueType rather than SDValue::getValueType. This requires supplying a result number and we shouldn't assume it was 0.
I don't have a test case. Just noticed while cleaning up some other code and saw that it occurred in other places.
llvm-svn: 321397
Re-land r321234. It had to be reverted because it broke the shared
library build. The shared library build broke because there was a
missing LLVMBuild dependency from lib/Passes (which calls
TargetMachine::getTargetIRAnalysis) to lib/Target. As far as I can
tell, this problem was always there but was somehow masked
before (perhaps because TargetMachine::getTargetIRAnalysis was a
virtual function).
Original commit message:
This makes the TargetMachine interface a bit simpler. We still need
the std::function in TargetIRAnalysis to avoid having to add a
dependency from Analysis to Target.
See discussion:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119749.html
I avoided adding all of the backend owners to this review since the
change is simple, but let me know if you feel differently about this.
Reviewers: echristo, MatzeB, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, jfb, arsenm, dschuff, mcrosier, sdardis, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D41464
llvm-svn: 321375
Despite what the comment said there isn't better codegen for 512-bit vectors. The 128/256/512 bit implementation jus stores to memory and loads an element. There's no advantage to doing that with a larger size. In fact in many cases it causes a stack realignment and generates worse code.
llvm-svn: 321369
Previously prefetch was only considered legal if sse was enabled, but it should be supported with 3dnow as well.
The prfchw flag now imply at least some form of prefetch without the write hint is available, either the sse or 3dnow version. This is true even if 3dnow and sse are explicitly disabled.
Similarly prefetchwt1 feature implies availability of prefetchw and the the prefetcht0/1/2/nta instructions. This way we can support _MM_HINT_ET0 using prefetchw and _MM_HINT_ET1 with prefetchwt1. And its assumed that if we have levels for the write hint we would have levels for the non-write hint, thus why we enable the sse prefetch instructions.
I believe this behavior is consistent with gcc. I've updated the prefetch.ll to test all of these combinations.
llvm-svn: 321335
This should only affect what we do for v8i16. Previously we went to v8i64, but if we have VLX we only need v8i32. This prevents an unnecessary zmm usage.
llvm-svn: 321303
We should have equally good shuffle options for v8i32 with VLX. This was spotted during my attempts to remove 512-bit vectors from SKX.
We still use 512-bits for v16i1, v32i1, and v64i1. I'm less sure we can handle those well with narrower vectors. i32 and i64 element sizes get the best shuffle support.
llvm-svn: 321291
Summary:
This makes the TargetMachine interface a bit simpler. We still need
the std::function in TargetIRAnalysis to avoid having to add a
dependency from Analysis to Target.
See discussion:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119749.html
I avoided adding all of the backend owners to this review since the
change is simple, but let me know if you feel differently about this.
Reviewers: echristo, MatzeB, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, jfb, arsenm, dschuff, mcrosier, sdardis, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D41464
llvm-svn: 321234
Multiple Closure objects can be created and stored for a single function. It's not a good idea to devote so many fields of it to storing pointers and references to global data structures of the pass. The closure class should only store the things needed to represent the closure itself.
This patch refactors many of the methods of Closure to belong to the pass object and to pass around a reference to the current Closure. The Closure class gains a few simple methods to add instructions and edges, and to return iterators to edges and instructions
Differential Revision: https://reviews.llvm.org/D41327
llvm-svn: 321213
Gather/scatter can implicitly sign extend from i32->i64 on indices. So if we know the sign bit of the input to a zext is 0 we can use the implicit extension.
llvm-svn: 321209
This patch turns shuffles of fadd/fsub with fmul into fmsubadd.
Patch by Dmitry Venikov
Differential Revision: https://reviews.llvm.org/D40335
llvm-svn: 321200
The gather instruction will implicitly sign extend to the pointer width, we don't need to further extend it. This can prevent unnecessary splitting in some cases.
There's still an issue that lowering on non-VLX can introduce another sign extend that doesn't get combined with shifts from a lowered sign_extend_inreg.
llvm-svn: 321152
Not sure how to test this cause I think the worst that happens is that we don't revisit the node a second time to look for additional combines. We used UpdateNodeOperands so the updating the DAG work was already done.
llvm-svn: 321148
We try to prevent shuffle combining to value types that would stop the folding of masked operations, but by just returning early, we were failing to try different shuffle types.
The TODOs are all still relevant here to improve codegen but we're lacking test examples.
llvm-svn: 321085
As mentioned in D38318 and D40865, modern Intel processors prefer to combine multiple shuffles to a variable shuffle mask (PSHUFB/VPERMPS etc.) instead of having multiple stage 'fixed' shuffles which put more pressure on Port 5 (at the expense of extra shuffle mask loads).
This patch provides a FeatureFastVariableShuffle target flag for Haswell+ CPUs that prefers combining 2 or more fixed shuffles to a single variable shuffle (default is 3 shuffles).
The long term aim is to drive more of this from schedule data (probably via the MC) but we're not close to being ready for that yet.
Differential Revision: https://reviews.llvm.org/D41323
llvm-svn: 321074
Extension to D39729 which performed this for vXi16, with the same bit flipping to handle SMAX/SMIN/UMAX cases, vXi8 UMIN horizontal reductions can be performed.
This makes use of the fact that by performing a pair-wise i8 SHUFFLE/UMIN before PHMINPOSUW, we both get the UMIN of each pair but also zero-extend the upper bits ready for v8i16.
Differential Revision: https://reviews.llvm.org/D41294
llvm-svn: 321070
BWI supports shifting by word amounts. Even if VLX isn't support we can still widen to v32i16 and extract the lower half. For SKX its preferrable to not use 512-bit vector if we can.
llvm-svn: 321059
Previously, we were checking for MVTs with sizes betwen 8 and 64 which only includes i8, i16, i32, and i64 today. But I don't think we should assume that and should list the types that are legal for x86. I also don't think we need i64 since type legalization is guaranteed to split those up.
llvm-svn: 321058
My reading of the SDM says that all bits of the shift amount are used. If the value of the element is larger than the number of bits the result the shift result is zero. So I think we need to zero_extend here to avoid garbage in the upper bits.
In reality we lower any_extend as zero_extend so in most cases it would be hard to hit this.
llvm-svn: 321055
Note:
- X86ISelLowering: setLibcallName(SINCOS) was superfluous as
InitLibcalls() already does it.
- ARMISelLowering: Setting libcallnames for sincos/sincosf seemed
superfluous as in the darwin case it wouldn't be used while for all
other cases InitLibcalls already does it.
llvm-svn: 321036
Empty string should be equivalent to "generic" which doesn't allow NOPL. Force tests to use specificy 'pentiumpro' to guarantee NOPL.
Fixes PR35686
llvm-svn: 321026
The block I moved things that need BWI and 512-bit or VLX is incorrectly qualified with just hasBWI || hasVLX. Here I've qualified it with hasBWI && (hasAVX512 || hasVLX) where the hasAVX512 will be replaced with allowing 512-bit vectors in an upcoming patch.
llvm-svn: 320957
Summary:
We had no tests for this and we couldn't do the optimization because of a bad use count check. We need to know how many non-undef pieces of the build vector were filled in and ensure our use count is equal to that. But on the shuffle combine version we need the use count to be 2.
The missing coverage was noticed during the review of D40335.
Reviewers: RKSimon, zvi, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41133
llvm-svn: 320950
Assuming we can safely adjust the broadcast index for the new type to keep it suitably aligned, then peek through BITCASTs when looking for the broadcast source.
Fixes PR32007
llvm-svn: 320933
In those cases, the pass thru operand of the methods isn't used. The calls to the scalar version were passing a MVT::i1 zero, which is an illegal type at the stage this code runs.
llvm-svn: 320928
Previously we promoted to v8i64, but we don't need to go all the way to 512-bits. If we have VLX we can use the 256-bit instruction. And even if we don't have VLX we can widen v8i32 to v16i32 and drop the upper half.
llvm-svn: 320926
We had a lot of separate 32 and 64 instructions that had the same scheduling data. This merges them into the same regular expression. This is pretty consistent with a lot of other instructions.
llvm-svn: 320924
This seemed to work due to a quirk in the X86 MC encoder that didn't emit a REX byte that the AND64ri8 implies when in 32-bit mode. This made the encoding the same as AND32ri8. I tried to add an assert to catch the dropped REX prefix that caught this.
llvm-svn: 320864
The target independent nodes will get legalized to the target specific nodes by their own legalization process. Someday I'd like to stop using a target specific for zero extends and truncates of legal types so the less places we reference the target specific opcode the better.
llvm-svn: 320863
When I wrote it I thought we were missing a potential optimization for KNL. But investigating further shows that for KNL we still do the optimal thing by widening to v4f32 and then using special isel patterns to widen again to zmm a register.
llvm-svn: 320862
Summary:
Currently we don't handle v32i1/v64i1 insert_vector_elt correctly as we fail to look at the number of elements closely and assume it can only be v16i1 or v8i1.
We also can't type legalize v64i1 insert_vector_elt correctly on KNL due to the type not being byte addressable as required by the legalizing through memory accesses path requires.
For the first issue, the patch now tries to pick a 512-bit register with the correct number of elements and promotes to that.
For the second issue, we now extend the vector to a byte addressable type, do the stores to memory, load the two halves, and then truncate the halves back to the original type. Technically since we changed the type, we may not need two loads, but actually checking that is more work and for the v64i1 case we do need them.
Reviewers: RKSimon, delena, spatel, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40942
llvm-svn: 320849
The asm parser wasn't preventing these from being accepted in 32-bit mode. Instructions that use a GR64 register are protected by the parser rejecting the register in 32-bit mode.
llvm-svn: 320846
This instruction doesn't access memory. It juse use a similar looking memory encoding. Don't require Intel syntax to put "qword ptr" in front of it.
llvm-svn: 320845
This has no effect due to a top level "let Predicates =" around the instructions. But its also not required because the GR64 usage in the instruction guarantees it can never match.
llvm-svn: 320843
There was a top level "let Predicates =" in the .td file that was overriding the Requires on each instruction.
I've added an assert to the code emitter to catch more cases like this. I'm sure this isn't the only place where the right predicates aren't being applied. This assert already found that we don't block btq/btsq/btrq in 32-bit mode.
llvm-svn: 320830
Work towards the unification of MIR and debug output by printing
`%stack.0` instead of `<fi#0>`, and `%fixed-stack.0` instead of
`<fi#-4>` (supposing there are 4 fixed stack objects).
Only debug syntax is affected.
Differential Revision: https://reviews.llvm.org/D41027
llvm-svn: 320827
A couple places didn't use the same SDValue variables to connect everything all the way through.
I don't have a test case for a bug in insert into the lower bits of a non-zero, non-undef vector. Not sure the best way to create that. We don't create the case when lowering concat_vectors which is the main way to get insert_subvectors.
llvm-svn: 320790
We have several instructions that were introduced in AVX512F that are only available in 512-bit form on KNL. We still make use of them for 128/256 by artificially widening and extracting during isel.
This commit separates these operations from the true 512-bit operations. This way we can qualify the normal 512-bit operations with needing 512-bit register support. And these special operations will get qualified with needing 512-bit registers OR VLX.
The 512-bit register qualification will be introduced in a future patch this just gets everything grouped to minimize deltas on that patch.
llvm-svn: 320782
Previously they were sort of interleaved in with XMM/YMM/ZMM action related code.
Trying to separate things so its easier to split 512-bit vectors later.
llvm-svn: 320781
Move it into the separate hasVLX block later in the constructor.
I'm trying to separate 128/256 and 512-bit related code so we can eventually qualify the hasAVX512 block with support for 512-bit vectors required by the prefer-vector-width feature support being talked about in D41096.
llvm-svn: 320779
Add support for properly handling PIC code with no-PLT. This equates to
`-fpic -fno-plt -O0` with the clang frontend. External functions are
marked with nonlazybind, which must then be indirected through the GOT.
This allows code to be built without optimizations in PIC mode without
going through the PLT. Addresses PR35653!
llvm-svn: 320776
Most of the -Wsign-compare warnings are due to the fact that
enums are signed by default in the MS ABI, while the
tautological comparison warnings trigger on x86 builds where
sizeof(size_t) is 4 bytes, so N > numeric_limits<unsigned>::max()
is always false.
Differential Revision: https://reviews.llvm.org/D41256
llvm-svn: 320750
Rather than adding more bits to express every
MMO flag you could want, just directly use the
MMO flags. Also fixes using a bunch of bool arguments to
getMemIntrinsicNode.
On AMDGPU, buffer and image intrinsics should always
have MODereferencable set, but currently there is no
way to do that directly during the initial intrinsic
lowering.
llvm-svn: 320746
This doesn't match the semantics of the extract_vector_elt operation. Nothing downstream knows the bits were zeroed so they still get masked or sign extended after the extrat anyway.
llvm-svn: 320723
store operation on a truncated memory (load) of vXi1 is poorly supported by LLVM and most of the time end with an assertion.
This patch fixes this issue.
Differential Revision: https://reviews.llvm.org/D39547
Change-Id: Ida5523dd09c1ad384acc0a27e9e59273d28cbdc9
llvm-svn: 320691
I've hopefully sidestepped the MSVC issue that caused it to be reverted. We no longer include the Sched enum from X86GenInstrInfo.inc on the X86 target. So hopefully MSVC's preprocessor will skip over it and nothing will notice the 11000 character enum name.
Original commit message:
When the scheduler tables are generated by tablegen, the instructions are divided up into groups based on their default scheduling information and how they are referenced by groups for each processor. For any set of instructions that are matched by a specific InstRW line, that group of instructions is guaranteed to not be in a group with any other instructions. So in general, the more InstRW class definitions are created, the more groups we end up with in the generated files. Particularly if a lot of the InstRW lines only match to single instructions, which is true of a large number of the Intel scheduler models.
This change alone reduces the number of instructions groups from ~6000 to ~5500. And there's lots more we could do.
llvm-svn: 320655
Pass the input vector through SimplifyDemandedBits as we only need the sign bit from each vector element of MOVMSK
We'd probably get more hits if SimplifyDemandedBits was better at handling vectors...
Differential Revision: https://reviews.llvm.org/D41119
llvm-svn: 320570
This reverts commit r320508, in effect re-applying r320308. Simon has already
reverted the parts that caused the crash that motivated the revert in r320492.
llvm-svn: 320512
D40335 was wanting to add FMSUBADD support, but it discovered that there are two pieces of code to make FMADDSUB and only one of those is tested. So I've asked that review to implement the one path until we get tests that test the existing code.
llvm-svn: 320507
Summary:
Simplify and generalize chain handling and search for 64-bit load-store pairs.
Nontemporal test now converts 64-bit integer load-store into f64 which it realizes directly instead of splitting into two i32 pairs.
Reviewers: craig.topper, spatel
Reviewed By: craig.topper
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D40918
llvm-svn: 320505
The checks we have for complete models are not great and miss many cases - e.g. in PR35636 it failed to recognise that only the first output (of 2) was actually tagged by the InstRW
Raised PR35639 and PR35643 as examples
llvm-svn: 320492
Recognize constant arrays with the following values:
0x0, 0x1, 0x3, 0x7, 0xF, 0x1F, .... , 2^(size - 1) -1
where //size// is the size of the array.
the result of a load with index //idx// from this array is equivalent to the result of the following:
(0xFFFFFFFF >> (sub 32, idx)) (assuming the array of type 32-bit integer).
And the result of an 'AND' operation on the returned value of such a load and another input, is exactly equivalent to the X86 BZHI instruction behavior.
See test cases in the LIT test for better understanding.
Differential Revision: https://reviews.llvm.org/D34141
llvm-svn: 320481
[X86] Use regular expressions more aggressively to reduce the number of scheduler entries needed for FMA3 instructions.
When the scheduler tables are generated by tablegen, the instructions are divided up into groups based on their default scheduling information and how they are referenced by groups for each processor. For any set of instructions that are matched by a specific InstRW line, that group of instructions is guaranteed to not be in a group with any other instructions. So in general, the more InstRW class definitions are created, the more groups we end up with in the generated files. Particularly if a lot of the InstRW lines only match to single instructions, which is true of a large number of the Intel scheduler models.
This change alone reduces the number of instructions groups from ~6000 to ~5500. And there's lots more we could do.
llvm-svn: 320470
When the scheduler tables are generated by tablegen, the instructions are divided up into groups based on their default scheduling information and how they are referenced by groups for each processor. For any set of instructions that are matched by a specific InstRW line, that group of instructions is guaranteed to not be in a group with any other instructions. So in general, the more InstRW class definitions are created, the more groups we end up with in the generated files. Particularly if a lot of the InstRW lines only match to single instructions, which is true of a large number of the Intel scheduler models.
This change alone reduces the number of instructions groups from ~6000 to ~5500. And there's lots more we could do.
llvm-svn: 320461
This matches AVX512 version and is more consistent overall. And improves our scheduler models.
In some cases this adds _Int to instructions that didn't have any Int_ before. It's a side effect of the adjustments made to some of the multiclasses.
llvm-svn: 320325
This separates the CPU specific scheduler model includes to occur after the instructions. Moves the instruction includes between the basic scheduler information and the CPU specific scheduler models.
llvm-svn: 320313
Simon Pilgrim