Previously, we just unified any arguments that seemed to be related to
each other. With this patch, we now respect dereference levels, etc.
which should make us substantially more accurate. Proper handling of
StratifiedAttrs will be done in a later patch.
Patch by Jia Chen.
Differential Revision: http://reviews.llvm.org/D21536
llvm-svn: 273596
X86FrameLowering::adjustForHiPEPrologue() contains a hard-coded offset
into an Erlang Runtime System-internal data structure (the PCB). As the
layout of this data structure is prone to change, this poses problems
for maintaining compatibility.
To address this problem, the compiler can produce this information as
module-level named metadata. For example (where P_NSP_LIMIT is the
offending offset):
!hipe.literals = !{ !2, !3, !4 }
!2 = !{ !"P_NSP_LIMIT", i32 152 }
!3 = !{ !"X86_LEAF_WORDS", i32 24 }
!4 = !{ !"AMD64_LEAF_WORDS", i32 24 }
Patch by Magnus Lang
Differential Revision: http://reviews.llvm.org/D20363
llvm-svn: 273593
Recommiting after correcting over-eager Debug Value transfer fixing PR28270.
[DAG] Previously debug values would transfer debuginfo for the selected
start node for a replacement which allows for debug to be dropped.
Push debug value transfer to occur with node/value replacement in
SelectionDAG, remove now extraneous transfers of debug values.
This refixes PR9817 which was being incompletely checked in the
testsuite.
Reviewers: jyknight
Subscribers: dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D21037
llvm-svn: 273585
This was noted in http://reviews.llvm.org/D21610 . The previous code
predated the use of APInt ( http://reviews.llvm.org/rL47654 ), so it
had to account for the fixed width of uint64_t.
Now that we're using the variable width APInt, we can remove some
complexity.
llvm-svn: 273584
The previous code would always do 1 or 2 prefix compares;
explicitly only do one.
This speeds up debug -gen-asm-matcher by ~10% (e.g. X86: 40s -> 35s).
llvm-svn: 273583
Summary:
SSAT saturates an integer, making sure that its value lies within
an interval [-k, k]. Since the constant is given to SSAT as the
number of bytes set to one, k + 1 must be a power of 2, otherwise
the optimization is not possible. Also, the select_cc must use <
and > respectively so that they define an interval.
Reviewers: mcrosier, jmolloy, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D21372
llvm-svn: 273581
During the core analysis, ExplodedNodes are added to the
ExplodedGraph, and those nodes are cached for deduplication purposes.
After core analysis, reports are generated. Here, trimmed copies of
the ExplodedGraph are made. Since the ExplodedGraph has already been
deduplicated, there is no need to deduplicate again.
This change makes it possible to add ExplodedNodes to an
ExplodedGraph without the overhead of deduplication. "Uncached" nodes
also cannot be iterated over, but none of the report generation code
attempts to iterate over all nodes. This change reduces the analysis
time of a large .C file from 3m43.941s to 3m40.256s (~1.6% speedup).
It should slightly reduce memory consumption. Gains should be roughly
proportional to the number (and path length) of static analysis
warnings.
This patch enables future work that should remove the need for an
InterExplodedGraphMap inverse map. I plan on using the (now unused)
ExplodedNode link to connect new nodes to the original nodes.
http://reviews.llvm.org/D21229
llvm-svn: 273572
The patch adds one more partition to the MIPS GOT. This time it is for
TLS related GOT entries. Such entries are located after 'local' and 'global'
ones. We cannot get a final offset for these entries at the time of
creation because we do not know size of 'local' and 'global' partitions.
So we have to adjust the offset later using `getMipsTlsOffset()` method.
All MIPS TLS relocations which need GOT entries operates MIPS style GOT
offset - 'offset from the GOT's beginning' - MipsGPOffset constant. That
is why I add new types of relocation expressions.
One more difference from othe ABIs is that the MIPS ABI does not support
any TLS relocation relaxations. I decided to make a separate function
`handleMipsTlsRelocation` and put MIPS TLS relocation handling code
there. It is similar to `handleTlsRelocation` routine and duplicates its
code. But it allows to make the code cleaner and prevent pollution of
the `handleTlsRelocation` by MIPS 'if' statements.
Differential Revision: http://reviews.llvm.org/D21606
llvm-svn: 273569
The PIC and PIE levels are not independent. In fact, if PIE is defined
it is always the same as PIC.
This is clear in the driver where ParsePICArgs returns a PIC level and
a IsPIE boolean. Unfortunately that is currently lost and we pass two
redundant levels down the pipeline.
This patch keeps a bool and a PIC level all the way down to codegen.
llvm-svn: 273566
No extra tests required as this is currently covered by existing testing, and this is basically impossible to write Unicode-specific tests for.
llvm-svn: 273563
When simplifying a load we need to make sure that the type of the
simplified value matches the type of the instruction we're processing.
In theory, we can handle casts here as we deal with constant data, but
since it's not implemented at the moment, we at least need to bail out.
This fixes PR28262.
llvm-svn: 273562
DeadStoreElimination can currently remove a small store rendered unnecessary by
a later larger one, but could not remove a larger store rendered unnecessary by
a series of later smaller ones. This adds that capability.
It works by keeping a map, which is used as an effective interval map, for each
store later overwritten only partially, and filling in that interval map as
more such stores are discovered. No additional walking or aliasing queries are
used. In the map forms an interval covering the the entire earlier store, then
it is dead and can be removed. The map is used as an interval map by storing a
mapping between the ending offset and the beginning offset of each interval.
I discovered this problem when investigating a performance issue with code like
this on PowerPC:
#include <complex>
using namespace std;
complex<float> bar(complex<float> C);
complex<float> foo(complex<float> C) {
return bar(C)*C;
}
which produces this:
define void @_Z4testSt7complexIfE(%"struct.std::complex"* noalias nocapture sret %agg.result, i64 %c.coerce) {
entry:
%ref.tmp = alloca i64, align 8
%tmpcast = bitcast i64* %ref.tmp to %"struct.std::complex"*
%c.sroa.0.0.extract.shift = lshr i64 %c.coerce, 32
%c.sroa.0.0.extract.trunc = trunc i64 %c.sroa.0.0.extract.shift to i32
%0 = bitcast i32 %c.sroa.0.0.extract.trunc to float
%c.sroa.2.0.extract.trunc = trunc i64 %c.coerce to i32
%1 = bitcast i32 %c.sroa.2.0.extract.trunc to float
call void @_Z3barSt7complexIfE(%"struct.std::complex"* nonnull sret %tmpcast, i64 %c.coerce)
%2 = bitcast %"struct.std::complex"* %agg.result to i64*
%3 = load i64, i64* %ref.tmp, align 8
store i64 %3, i64* %2, align 4 ; <--- ***** THIS SHOULD NOT BE HERE ****
%_M_value.realp.i.i = getelementptr inbounds %"struct.std::complex", %"struct.std::complex"* %agg.result, i64 0, i32 0, i32 0
%4 = lshr i64 %3, 32
%5 = trunc i64 %4 to i32
%6 = bitcast i32 %5 to float
%_M_value.imagp.i.i = getelementptr inbounds %"struct.std::complex", %"struct.std::complex"* %agg.result, i64 0, i32 0, i32 1
%7 = trunc i64 %3 to i32
%8 = bitcast i32 %7 to float
%mul_ad.i.i = fmul fast float %6, %1
%mul_bc.i.i = fmul fast float %8, %0
%mul_i.i.i = fadd fast float %mul_ad.i.i, %mul_bc.i.i
%mul_ac.i.i = fmul fast float %6, %0
%mul_bd.i.i = fmul fast float %8, %1
%mul_r.i.i = fsub fast float %mul_ac.i.i, %mul_bd.i.i
store float %mul_r.i.i, float* %_M_value.realp.i.i, align 4
store float %mul_i.i.i, float* %_M_value.imagp.i.i, align 4
ret void
}
the problem here is not just that the i64 store is unnecessary, but also that
it blocks further backend optimizations of the other uses of that i64 value in
the backend.
In the future, we might want to add a special case for handling smaller
accesses (e.g. using a bit vector) if the map mechanism turns out to be
noticeably inefficient. A sorted vector is also a possible replacement for the
map for small numbers of tracked intervals.
Differential Revision: http://reviews.llvm.org/D18586
llvm-svn: 273559
We would incorrectly emit the directive sections due to the missing overridden
methods. We now emit the expected "/DEFAULTLIB" rather than "-l" options for
requested linkage
llvm-svn: 273558
Summary:
The backend has no reason to behave like a driver and should generally do
as it's told (and error out if it can't) instead of trying to figure out
what the API user meant. The default ABI is still derived from the arch
component as a concession to backwards compatibility.
API-users that previously passed an explicit CPU and a triple that was
inconsistent with the CPU (e.g. mips-linux-gnu and mips64r2) may get a
different ABI to what they got before. However, it's expected that there
are no such users on the basis that CodeGen has been asserting that the
triple is consistent with the selected ABI for several releases. API-users
that were consistent or passed '' or 'generic' as the CPU will see no
difference.
Reviewers: sdardis, rafael
Subscribers: rafael, dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D21466
llvm-svn: 273557
Move most of the initializations in ARMSubtarget::initializeEnvironment to
member initializers.
Change suggested by Matthias Braun (see http://reviews.llvm.org/D21432).
llvm-svn: 273556
Summary:
When parseAnyRegister() encounters a symbol alias, it parses integers and adds
a corresponding expression to the operand list. This is clearly wrong since the
only operands that parseAnyRegister() should be accepting are registers.
It's not clear why this code was added and there are no test cases that cover
it. I think it might be leftover from when searchSymbolAlias() was more widely
used.
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D21377
llvm-svn: 273555
This flag was introduced in r269655 with the new diagnostic handler for llc. Its
purpose was to keep the old behavior for some of the tests that didn't recover
well after an error. Those tests have been fixed, so now it's safe to remove the
flag entirely.
Fixes PR27759.
Differential Revision: http://reviews.llvm.org/D21368
llvm-svn: 273554
Currently isComplete = 1 requires that every instruction must
be described, declared unsupported or marked as having no
scheduling information for a processor.
For some backends such as MIPS, this requirement entails
long regex lists of instructions that are unsupported.
This patch teaches Tablegen to skip over instructions that
are associated with unsupported feature when checking if the
scheduling model is complete.
Patch by: Daniel Sanders
Contributions by: Simon Dardis
Reviewers: MatzeB
Differential Reviewer: http://reviews.llvm.org/D20522
llvm-svn: 273551
The exit-on-error flag was necessary in order to avoid an assertion when
handling DYNAMIC_STACKALLOC nodes in SelectionDAGLegalize.
We can avoid the assertion by creating some dummy nodes. This enables us to
remove the exit-on-error flag on the first 2 run lines (SI), but on the third
run line (R600) we would run into another assertion when trying to reserve
indirect registers. This patch also replaces that assertion with an early exit
from the function.
Fixes PR27761.
Differential Revision: http://reviews.llvm.org/D20852
llvm-svn: 273550
dext and dins, along with their 'm' and 'u' variants are defined in mips64r2,
not mips64.
Reviewers: dsanders, vkalintiris
Differential Review: http://reviews.llvm.org/D21608
llvm-svn: 273549
Aaron Ballman