To match NewPM pass name, and also for readability.
Also rename rpo-functionattrs -> rpo-function-attrs while we're here.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D84694
I think these were added as a workaround for SelectionDAG lacking half
legalization support in the past. I think they should probably be
removed from the IR, but clang does still have a target control to
emit these instead of the native half fpext/fptrunc.
This patch renames checkListEntryOperands() to checkOperandCount(), so
that we are able to check DWARF expression operands using the same
function.
Reviewed By: jhenderson, labath
Differential Revision: https://reviews.llvm.org/D84624
While deallocating the stackframe, the offset used to reload the
callee-saved registers was not pointing to the SVE callee-saves,
but rather to the whole SVE area.
+--------------+
| GRP callee |
| saves |
+--------------+ <- FP
| SVE callee |
| saves |
+--------------+ <- Should restore SVE callee saves from here
| SVE Spills |
| and Locals |
+--------------+ <- instead of from here.
| |
: :
| |
+--------------+ <- SP
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D84539
Instead of aligning the last callee-saved-register slot to the stack
alignment (16 bytes), just align the SVE callee-saved block. This also
simplifies the code that allocates space for the callee-saves.
This change is needed to make sure the offset to which the callee-saved
register is spilled, corresponds to the offset used for e.g. unwind call
frame instructions.
Reviewers: efriedma, paulwalker-arm, david-arm, rengolin
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84042
Fixed stack objects are preallocated and defined to be allocated before
any of the regular stack objects. These are normally used to model stack
arguments.
The AAPCS does not support passing SVE registers on the stack by value
(only by reference). The current layout also doesn't place them before
all stack objects, but rather before all SVE objects. Removing this
simplifies the code that emits the allocation/deallocation
around callee-saved registers (D84042).
This patch also removes all uses of fixedStack from from
framelayout-sve.mir, where this was used purely for testing purposes.
Reviewers: paulwalker-arm, efriedma, rengolin
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D84538
This patch adds support for emitting custom range list content.
We are able to handcraft a custom range list via the following syntax.
```
debug_rnglists:
- Lists:
- Entries:
- Operator: DW_RLE_startx_endx
Values: [ 0x1234, 0x1234 ]
- Content: '1234567890abcdef'
- Content: 'abcdef1234567890'
```
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D84618
This adds the `ShType` key similar to others `Sh*` keys we have.
My use case is the following. Imagine we have a `SHT_SYMTAB_SHNDX`
section and want to hide it from a dumper. The natural way would be to
do something like:
```
- Name: .symtab_shndx
Type: [[TYPE=SHT_SYMTAB_SHNDX]]
Entries: [ 0, 1 ]
```
and then change the TYPE from `SHT_SYMTAB_SHNDX` to something else,
for example to `SHT_PROGBITS`.
But we have a problem: regular sections does not have `Entries` key,
so yaml2obj will be unable to produce a section.
The solution is to introduce a `ShType` key to override the final type.
This is not the first time I am facing the need to change the type. I
was able to invent workarounds or solved issues differently in the past,
but finally came to conclusion that we just should support the `ShType`.
Differential revision: https://reviews.llvm.org/D84738
There is a silly mistake where release() is used instead of reset() for free resources of unique pointer.
Reviewed By: ebrevnov
Differential Revision: https://reviews.llvm.org/D84747
Many Thumb1 instructions are defined to set CPSR if executed outside an IT
block, but leave it alone from inside one. In MachineIR this is represented by
whether an optional register is CPSR or NoReg (0), and affects how the
instructions are printed.
This sets the instruction to the appropriate form during if-conversion.
Currently the instruction paddi always takes s34imm as the type for the
34 bit immediate. However, the PC Relative form of the instruction should
not produce the same fixup as the non PC Relative form.
This patch splits the s34imm type into s34imm and s34imm_pcrel so that two
different fixups can be emitted.
Reviewed By: nemanjai, #powerpc, kamaub
Differential Revision: https://reviews.llvm.org/D83255
In order to facilitate review of D79485 here is a small NFC change which restructures code around handling of SCCs in BPI.
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D84514
The function setLastAccessAndModificationTime() uses function
futimens() or futimes() by default. Both functions are not
available in z/OS, therefore functionality is implemented using
__fchattr() on z/OS.
Reviews by: abhina.sreeskantharajan
Differential Revision: https://reviews.llvm.org/D83945
This patch added dependency graph to the attributor so that we can dump the dependencies between AAs more easily. We can also apply general graph algorithms to the graph, making it easier for us to create deep wrappers.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D78861
This is recommit of f51bc4fb60, reverted in 8577595e03, because
the function `flock` is not available on Solaris. In this variant
`flock` was replaced with `fcntl`, which is a POSIX function.
New functions `lockFile`, `tryLockFile` and `unlockFile` implement
simple file locking. They lock or unlock entire file. This must be
enough to support simulataneous writes to log files in parallel builds.
Differential Revision: https://reviews.llvm.org/D78896
An initial backend patch towards fixing the various poor HADD combines (PR34724, PR41813, PR45747 etc.).
This extends isHorizontalBinOp to check if we have per-element horizontal ops (odd+even element pairs), but not in the expected serial order - in which case we build a "post shuffle mask" that we can apply to the HOP result, assuming we have fast-hops/optsize etc.
The next step will be to extend the SHUFFLE(HOP(X,Y)) combines as suggested on PR41813 - accepting more post-shuffle masks even on slow-hop targets if we can fold it into another shuffle.
Differential Revision: https://reviews.llvm.org/D83789
All analysis are preserved if there's no local change, and thanks to
3667d87a33 this property is enforced for all
passes.
Skipping the dependency computation improves the performance when there's a lot
of small functions, where only a few change happen.
Thanks to Nikita Popov who provided this numbers (extract below)
https://llvm-compile-time-tracker.com/compare.php?from=183342c0a9850e60dd7a004b651c83dfb3a7d25e&to=f2f91e6a2743070471cc9471e4e8c646e50c653c&stat=instructions
O3: (number of instructions)
Benchmark Old New
kimwitu++ 60783M 59968M (-1.34%)
sqlite3 73200M 73083M (-0.16%)
consumer-typeset 52776M 52712M (-0.12%)
Bullet 133709M 132940M (-0.58%)
tramp3d-v4 123864M 123186M (-0.55%)
mafft 55534M 55477M (-0.10%)
ClamAV 76292M 76164M (-0.17%)
lencod 103190M 103061M (-0.13%)
SPASS 64068M 63713M (-0.55%)
7zip 197332M 196308M (-0.52%)
geomean 85750M 85389M (-0.42%)
Differential Revision: https://reviews.llvm.org/D80707
While this doesn't appear to help with the perf issue being exposed by
D84108, the function as-is is very weird, convoluted, and what's worse,
recursive.
There was no need for `SpeculativelyAvaliableAndUsedForSpeculation`,
tri-state choice is enough. We don't even ever check for that state.
The basic idea here is that we need to perform a depth-first traversal
of the predecessors of the basic block in question, either finding a
preexisting state for the block in a map, or inserting a "placeholder"
`SpeculativelyAvaliable`,
If we encounter an `Unavaliable` block, then we need to give up search,
and back-propagate the `Unavaliable` state to the each successor of
said block, more specifically to the each `SpeculativelyAvaliable`
we've just created.
However, if we have traversed entirety of the predecessors and have not
encountered an `Unavaliable` block, then it must mean the value is fully
available. We could update each inserted `SpeculativelyAvaliable` into
a `Avaliable`, but we don't need to, as assertion excersizes,
because we can assume that if we see an `SpeculativelyAvaliable` entry,
it is actually `Avaliable`, because during the time we've produced it,
if we would have found that it has an `Unavaliable` predecessor,
we would have updated it's successors, including this block,
into `Unavaliable`
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D84181
XBEGIN causes several based blocks to be inserted. If flags are live across it we need to make eflags live in the new basic blocks to avoid machine verifier errors.
Fixes PR46827
Reviewed By: ivanbaev
Differential Revision: https://reviews.llvm.org/D84479
By default we pick a 1 byte displacement and let relaxation enlarge it if necessary. The GNU assembler supports a pseudo prefix to basically pre-relax the instruction the larger size.
I plan to add {disp8} and {disp32} support for memory operands in another patch which is why I've included the parsing code and enum for {disp8} pseudo prefix as well.
Reviewed By: echristo
Differential Revision: https://reviews.llvm.org/D84709
In 16-bit mode we can encode a 32-bit address using 0x67 prefix.
We were failing to do this when the index register was a 32-bit
register, the base register was not present, and the displacement
fit in 16-bits.
Fixes PR46866.
PGO profile is usually more precise than sample profile. However, PGO profile
needs to be collected from loadtest and loadtest may not be representative
enough to the production workload. Sample profile collected from production
can be used as a supplement -- for functions cold in loadtest but warm/hot
in production, we can scale up the related function in PGO profile if the
function is warm or hot in sample profile.
The implementation contains changes in compiler side and llvm-profdata side.
Given an instr profile and a sample profile, for a function cold in PGO
profile but warm/hot in sample profile, llvm-profdata will either mark
all the counters in the profile to be -1 or scale up the max count in the
function to be above hot threshold, depending on the zero counter ratio in
the profile. The assumption is if there are too many counters being zero
in the function profile, the profile is more likely to cause harm than good,
then llvm-profdata will mark all the counters to be -1 indicating the
function is hot but the profile is unaccountable. In compiler side, if a
function profile with all -1 counters is seen, the function entry count will
be set to be above hot threshold but its internal profile will be dropped.
In the long run, it may be useful to let compiler support using PGO profile
and sample profile at the same time, but that requires more careful design
and more substantial changes to make two profiles work seamlessly. The patch
here serves as a simple intermediate solution.
Differential Revision: https://reviews.llvm.org/D81981
Summary:
Use getChildren() method in GraphDiff instead of GraphTraits.
This simplifies the code and allows for refactorigns inside GraphDiff.
All usecase need not have a light-weight/copyable range.
Clean GraphTraits implementation.
Reviewers: dblaikie
Subscribers: hiraditya, llvm-commits, george.burgess.iv
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D84562
These aren't implemented and we're still relying on the AtomicExpand
pass, but mark these as lower to eliminate a few of the few remaining
no rules defined cases.
The CMAKE_BUILD_TYPE is only meaningful to single-configuration
generators (such as make and Ninja). For multi-configuration generators
like Xcode and MSVC this variable won't be set, resulting in a CMake
error.
The move constructor of MachineModuleInfo currently does not copy the
MachineFunctions map. This commit fixes this issue.
Patch by Sridhar Gopinath. Thanks!
Differential Revision: https://reviews.llvm.org/D84274
Summary:
This seems obvious in hindsight, but the result is surprising.
I've measured compile-time of `-openmpopt` pass standalone
on RawSpeed unity build, and while there is some OpenMP stuff,
most is not OpenMP. But nonetheless the pass does a lot of costly
preparations before ever trying to look for OpenMP stuff in SCC.
Numbers (n=25): 0.094624s -> 0.005976s, an -93.68% improvement, or ~16x
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: yaxunl, hiraditya, guansong, llvm-commits, sstefan1
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D84689
Speed up the method RequiresStackProtector by checking the intrinsic
value of the call. The original code calls getName() that returns an
allocating std::string on each check. This change removes about 96072
std::string instances when compiling sqlite3.c; The function was
discovered with a Facebook-internal performance tool.
Differential Revision: https://reviews.llvm.org/D84620
...with the non-template version, as the template version might
increase the size of the compiler build.
Methods affected:
1.`findAddrModeSVELoadStore`
2. `SelectPredicatedStore`
Also, remove the `const` qualifier from the `unsigned` parameters of
the methods to conform with other similar methods in the class.
This cleans up several CMakeLists.txt's where -Wno-suggest-override was manually specified. These test targets now inherit this flag from the gtest target.
Some unittests CMakeLists.txt's, in particular Flang and LLDB, are not touched by this patch. Flang manually adds the gtest sources itself in some configurations, rather than linking to LLVM's gtest target, so this fix would be insufficient to cover those cases. Similarly, LLDB has subdirectories that manually add the gtest headers to their include path without linking to the gtest target, so those subdirectories still need -Wno-suggest-override to be manually specified to compile without warnings.
Differential Revision: https://reviews.llvm.org/D84554
For now, just return and do nothing when we see llvm.used and
llvm.compiler.used global array.
Hopefully, we could come up with a good solution later to prevent
linker from eliminating symbols in llvm.used array.
Reviewed By: DiggerLin, daltenty
Differential Revision: https://reviews.llvm.org/D84363
Arthur Eubanks