We held off on this before as `LLVM_LIBDIR_SUFFIX` conflicted with it.
Now we return this.
`LLVM_LIBDIR_SUFFIX` is kept as a deprecated way to set
`CMAKE_INSTALL_LIBDIR`. The other `*_LIBDIR_SUFFIX` are just removed
entirely.
I imagine this is too potentially-breaking to make LLVM 15. That's fine.
I have a more minimal version of this in the disto (NixOS) patches for
LLVM 15 (like previous versions). This more expansive version I will
test harder after the release is cut.
Reviewed By: sebastian-ne, ldionne, #libc, #libc_abi
Differential Revision: https://reviews.llvm.org/D130586
I went over the output of the following mess of a command:
`(ulimit -m 2000000; ulimit -v 2000000; git ls-files -z | parallel --xargs -0 cat | aspell list --mode=none --ignore-case | grep -E '^[A-Za-z][a-z]*$' | sort | uniq -c | sort -n | grep -vE '.{25}' | aspell pipe -W3 | grep : | cut -d' ' -f2 | less)`
and proceeded to spend a few days looking at it to find probable typos
and fixed a few hundred of them in all of the llvm project (note, the
ones I found are not anywhere near all of them, but it seems like a
good start).
Reviewed By: inclyc
Differential Revision: https://reviews.llvm.org/D131167
The pattern matching optimization of Polly detects and optimizes dense general
matrix-matrix multiplication. The generated code is close to high performance
implementations of matrix-matrix multiplications, which are contained in
manually tuned libraries. The described pattern matching optimization is
a particular case of tensor contraction optimization, which was
introduced in [1].
This patch generalizes the pattern matching to the case of tensor contractions
using the form of data dependencies and memory accesses produced by tensor
contractions [1].
Optimization of tensor contractions will be added in the next patch. Following
the ideas introduced in [2], it will logically represent tensor contraction
operands as matrix multiplication operands and use an approach for
optimization of matrix-matrix multiplications.
[1] - Gareev R., Grosser T., Kruse M. High-Performance Generalized Tensor
Operations: A Compiler-Oriented Approach // ACM Transactions on
Architecture and Code Optimization (TACO). 2018. Vol. 15, no. 3.
P. 34:1–34:27. DOI: 10.1145/3235029.
[2] - Matthews D. High-Performance Tensor Contraction without BLAS // SIAM
Journal on Scientific Computing. 2018. Vol. 40, no. 1. P. C 1—C 24.
DOI: 110.1137/16m108968x.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D114336
The IR Verifier requires that every call instruction to an inlineable
function (among other things, its implementation must be visible in the
translation unit) must also have !dbg metadata attached to it. When
parallelizing, Polly emits calls to OpenMP runtime function out of thin
air, or at least not directly derived from a bounded list of previous
instruction. While we could search for instructions in the SCoP that has
some debug info attached to it, there is no guarantee that we find any.
Our solution is to generate a new DILocation that points to line 0 to
represent optimized code.
The OpenMP function implementation is usually not available in the
user's translation unit, but can become visible in an LTO build. For
the bug to appear, libomp must also be built with debug symbols.
IMHO, the IR verifier rule is too strict. Runtime functions can
also be inserted by other optimization passes, such as
LoopIdiomRecognize. When inserting a call to e.g. memset, it uses the
DebugLoc from a StoreInst from the unoptimized code. It is not
required to have !dbg metadata attached either.
Fixes#56692
Firstly, we we make an additional GNUInstallDirs-style variable. With
NixOS, for example, this is crucial as we want those to go in
`${dev}/lib/cmake` not `${out}/lib/cmake` as that would a cmake subdir
of the "regular" libdir, which is installed even when no one needs to do
any development.
Secondly, we make *Config.cmake robust to absolute package install
paths. We for NixOS will in fact be passing them absolute paths to make
the `${dev}` vs `${out}` distinction mentioned above, and the
GNUInstallDirs-style variables are suposed to support absolute paths in
general so it's good practice besides the NixOS use-case.
Thirdly, we make `${project}_INSTALL_PACKAGE_DIR` CACHE PATHs like other
install dirs are.
Reviewed By: sebastian-ne
Differential Revision: https://reviews.llvm.org/D117973
Following some recent discussions, this changes the representation
of callbrs in IR. The current blockaddress arguments are replaced
with `!` label constraints that refer directly to callbr indirect
destinations:
; Before:
%res = callbr i8* asm "", "=r,r,i"(i8* %x, i8* blockaddress(@test8, %foo))
to label %asm.fallthrough [label %foo]
; After:
%res = callbr i8* asm "", "=r,r,!i"(i8* %x)
to label %asm.fallthrough [label %foo]
The benefit of this is that we can easily update the successors of
a callbr, without having to worry about also updating blockaddress
references. This should allow us to remove some limitations:
* Allow unrolling/peeling/rotation of callbr, or any other
clone-based optimizations
(https://github.com/llvm/llvm-project/issues/41834)
* Allow duplicate successors
(https://github.com/llvm/llvm-project/issues/45248)
This is just the IR representation change though, I will follow up
with patches to remove limtations in various transformation passes
that are no longer needed.
Differential Revision: https://reviews.llvm.org/D129288
The copy statements inserted by the matrix-multiplication optimization
introduce new dependencies between the copy statements and other
statements. As a result, the DependenceInfo must be recomputed.
Not recomputing them caused IslAstInfo to deduce that some loops are
parallel but cause race conditions when accessing the packed arrays.
As a result, matrix-matrix multiplication currently cannot be
parallelized.
Also see discussion at https://reviews.llvm.org/D125202
Binary size of `clang` is trivial; namely, numerical value doesn't
change when measured in MiB, and `.data` section increases from 139Ki to
173 Ki.
Differential Revision: https://reviews.llvm.org/D128070
This enabled opaque pointers by default in LLVM. The effect of this
is twofold:
* If IR that contains *neither* explicit ptr nor %T* types is passed
to tools, we will now use opaque pointer mode, unless
-opaque-pointers=0 has been explicitly passed.
* Users of LLVM as a library will now default to opaque pointers.
It is possible to opt-out by calling setOpaquePointers(false) on
LLVMContext.
A cmake option to toggle this default will not be provided. Frontends
or other tools that want to (temporarily) keep using typed pointers
should disable opaque pointers via LLVMContext.
Differential Revision: https://reviews.llvm.org/D126689
This patch implements the `MaximalStaticExpansion` and its printer in NPM.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D125870
Now that SimpleLoopUnswitch and other transforms no longer introduce
branch on poison, enable the -branch-on-poison-as-ub option by
default. The practical impact of this is mostly better flag
preservation in SCEV, and some freeze instructions no longer being
necessary.
Differential Revision: https://reviews.llvm.org/D125299
The tests dot-scops.ll and dot-scops-npm.ll both wrote to the same file
scops.func.dot. If they are executed in parallel they will race for
the file. Fix by renaming func to func_npm in dot-scops-npm.ll so this
test writes dot scops.func_npm.dot.
Long-term, we will probably pass a file name (prefix) to the
printer pass such that we can use the guaranteed-unique LIT %t
placeholder in tests.
Most clients only used these methods because they wanted to be able to
extend or truncate to the same bit width (which is a no-op). Now that
the standard zext, sext and trunc allow this, there is no reason to use
the OrSelf versions.
The OrSelf versions additionally have the strange behaviour of allowing
extending to a *smaller* width, or truncating to a *larger* width, which
are also treated as no-ops. A small amount of client code relied on this
(ConstantRange::castOp and MicrosoftCXXNameMangler::mangleNumber) and
needed rewriting.
Differential Revision: https://reviews.llvm.org/D125557
This make is obivious that a class was not intended to be derived from.
NPM analysis pass can unfortunately not marked as final because they are
derived from a llvm::Checker<T> template internally by the NPM.
Also normalize the use of classes/structs
* NPM passes are structs
* Legacy passes are classes
* structs that have methods and are not a visitor pattern are classes
* structs have public inheritance by default, remove "public" keyword
* Use typedef'ed type instead of inline forward declaration
Rename the legacy `DOTGraphTraits{Module,}{Viewer,Printer}` to the corresponding `DOTGraphTraits...WrapperPass`, and implement a new `DOTGraphTraitsViewer` with new pass manager.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D123677
The legacy LoopUnswitch pass is only used in the legacy pass manager
pipeline, which is deprecated.
The NewPM replacement is SimpleLoopUnswitch and I think it is time to
remove the legacy LoopUnswitch code.
Fixes#31000.
Reviewed By: aeubanks, Meinersbur, asbirlea
Differential Revision: https://reviews.llvm.org/D124376
Rather than checking the bitcast pointer element types, compare
the element type of the access and the GEP result type.
The entire code is dubious due to the inspection of GEP structure,
but this at least preserves the spirit of the existing code.
John Ericson