find the largest address range (possibly combining multiple
LineEntry's for this line number) that is contiguous.
This allows lldb's fast-step stepping algorithm to potentially
run for a longer address range than if we have to stop at every
LineEntry indicating a subexpression in the source line.
http://reviews.llvm.org/D15407
<rdar://problem/23270882>
llvm-svn: 255590
stl upper_bound method instead of lower_bound - we were
failing to find some cached data in the L1 cache resulting
in extra memory read packets while stepping.
The bug with the existing code looked like this:
If the L1 cache has 8 bytes at address 0x1000 and 8 bytes
at address 0x2000 and we are searching for 4 bytes at 0x2004,
the use of lower_bound would return the end() of the container
and so we would incorrectly treat the memory as uncached.
(the L1 cache is memory seeded from debugserver in the T aka
questionmark packet, where debugserver will send up the stack
memory that likely contains the caller's stack pointer and
frame pointer values.)
<rdar://problem/23869227>
llvm-svn: 255421
The standard remote debugging workflow with gdb is to start the
application on the remote host under gdbserver (e.g.: gdbserver :5039
a.out) and then connect to it with gdb.
The same workflow is supported by debugserver/lldb-gdbserver with a very
similar syntax but to access all features of lldb we need to be
connected also to an lldb-platform instance running on the target.
Before this change this had to be done manually with starting a separate
lldb-platform on the target machine and then connecting to it with lldb
before connecting to the process.
This change modifies the behavior of "platform connect" with
automatically connecting to the process instance if it was started by
the remote platform. With this command replacing gdbserver in a gdb
based worflow is usually as simple as replacing the command to execute
gdbserver with executing lldb-platform.
Differential revision: http://reviews.llvm.org/D14952
llvm-svn: 255016
This change introduce 3 different working mode for Platform::LoadImage
depending on the file specs specified.
* If only a remote file is specified then the remote file is loaded on
the target (same behavior as before)
* If only a local file is specified then the local file is installed to
the current working directory and then loaded from there.
* If both local and remote file is specified then the local file is
installed to the specified location and then loaded from there.
The same options are exposed on the SB API with a new method LoadImage
method while the old signature presers its meaning.
On the command line the installation of the shared library can be specified
with the "--install" option of "process load".
Differential revision: http://reviews.llvm.org/D15152
llvm-svn: 255014
This is a resubmit of r254403, see that commit's message for context. This fixes an issue in the
original commit, where we would incorrectly interrupt the process if the interrupt request came
just as we were about to send the stopped event to the public.
llvm-svn: 254902
This patch fixes setting breakpoints on symbol for variants of C and
Pascal where the language is "unknown" within the filter-by-language
process added in r252356. It also renames GetLanguageForSymbolByName to
GuessLanguageForSymbolByName and adds comments explaining the pitfalls
of the flawed assumption that the language can be determined solely from
the name and target.
Reviewed by: jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D15175
llvm-svn: 254753
On android the symbols exposed by libdl (dlopen, dlclose, dlerror)
prefixed by "__dl_". This change moves the handling of process
load/unload to the platform object and override it for android to
handle the special prefix.
Differential revision: http://reviews.llvm.org/D11465
llvm-svn: 254504
Summary:
The following situation was occuring in TestAttachResume:
- we did a "continue" from a breakpoint (which involves a private start-stop to step over the
breakpoint)
- after receiving the stop-reply from the step-over, we issue a "detach" (which requires a
process interrupt)
- at this moment, the public state is "running", private state is "about-to-be-stopped" (the
stopped event was broadcast, but it was not received yet)
- StopForDestroyOrDetach (public thread) notes the public state is running, sends an interrupt
request to the private thread
- private thread gets the eBroadcastBitInterrupt (before the eStateStopped message), and asks the
process plugin to stop (via Halt())
- process plugin says it has nothing to do as the process is already stopped
- private thread shrugs and carries on. receives the stop event, restores the breakpoint and
resumes the process.
- after a while, the public thread times out and says it failed to stop the process
This patch does the following:
- splits Halt() into two functions, private and public, their usage depends on the context
- public Halt(): sends eBroadcastBitInterrupt to the private thread and waits for the Stop
event
- HaltPrivate(): asks the plugin to stop and makes a note that the halt was requested. When the
next stop event comes it sets the interrupt flag on it.
- removes HijackPrivateProcessEvents(), as the only user (old Halt()) has gone away
- removes the m_currently_handling_event hack, as the new Halt() does not need it
- adds a use_run_lock parameter to public Halt() and WaitForProcessToStop(). This was needed
because RunThreadPlan uses Halt() while holding the run lock and we don't want Halt() to take
it away from him.
Reviewers: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14989
llvm-svn: 254403
correct OS type when running on an apple tv or apple watch.
Also, in TargetList::CreateTargetInternal, check that a platform
is returned by GetPlatformForArchitecture fallback instead of
adding it to the vector of platforms unconditionally; we can end up
crashing when we call a member function on it later.
<rdar://problem/23601982>, <rdar://problem/21292886>
llvm-svn: 253763
breakpoint as "file address" so that the address breakpoint will track that
module even if it gets loaded in a different place. Also fixed the Address
breakpoint resolver so that it handles this tracking correctly.
llvm-svn: 253308
correctly handle stepping over one breakpoint directly onto another breakpoint.
This isn't fixing that bug, but rather just changing 252963 to not use breakpoints
if it is only stepping one instruction.
llvm-svn: 253008
of addresses, and the range has no branches, instead of running to the last instruction and
single-stepping over that, run to the first instruction after the end of the range. If there
are no branches in the current range, then the bytes right after it have to be in the current
function, and have to be instructions not data in code, so this is safe. And it cuts down one
extra stepi per source range step.
Incidentally, this also works around a bug in the llvm Intel assembler where it treats the "rep"
prefix as a separate instruction from the repeated instruction. If that were at the end of a
line range, then we would put a trap in place of the repeated instruction, which is undefined
behavior. Current processors just ignore the repetition in this case, which changes program behavior.
Since there would never be a line range break after the rep prefix, always doing the range stepping
to the beginning of the new range avoids this problem.
<rdar://problem/23461686>
llvm-svn: 252963
It used to be a unique pointer, and there could be a case where ClangASTSource
held onto a copy of the pointer but Target::Destroy destroyed the unique pointer
in the mean time.
I also ensured that there is a validity check on the target (which confirms that
a ClangASTImporter can be generated) before the target's shared pointer is
copied into ClangASTSource.
This race condition caused a crash if Target::Destroy was called and then later
the target objecct was deleted.
llvm-svn: 252665
This latter determination may or may not be possible on a per-language basis; and neither is mandatory to implement for any language
Use this knowledge in the ValueObjectPrinter to generalize the notion of IsObjCNil() and the respective printout
llvm-svn: 252663
"Modify internal breakpoints so they resolve just like external
breakpoints do. This allow you to set symbol and file + line internal
breakpoints and have them get updated correctly."
<rdar://problem/16931767>
llvm-svn: 252584
triple for a process. He writes, "Changes to the way setting the
triple works on a target so that if the target has passed a fully
specified triple, and the newly passed triple is not a revamp of
the current one, and the current one is fully specified, then do
not replace the existing triple."
Triple handling got a bit more complicated on mac with the addition
of ios/watchos/tvos and their simulators, and tracking the correct
os versions for them so expressions are compiled with the expected
APIs available to the user.
<rdar://problem/19820698>
llvm-svn: 252583
Summary:
Since this is within the lldb namespace, the compiler tries to
export a symbol for it. Unfortunately, since it is inlined, the
symbol is hidden and this results in a mess of warnings when
building on OS X with cmake.
Moving it to the lldb_private namespace eliminates that problem.
Reviewers: clayborg
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D14417
llvm-svn: 252396
Summary:
On Linux, if a thread-specific conditional breakpoint was hit, it
won't necessarily be the thread that hit the breakpoint itself that
evaluates the conditional expression, so the thread that hit the
breakpoint could still be asked to stop, even though it hasn't been
allowed to run since the previous stop.
Reviewers: sivachandra, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14472
llvm-svn: 252391
instance:
break set -l c++ -r Name
will only break on C++ symbols that match Name, not ObjC or plain C symbols. This also works
for "break set -n" and there are SB API's to pass this as well.
llvm-svn: 252356
so when it is run on a kext (which won't activate
any platform plugins), you'll get a warning message
which may be helpful to the user.
llvm-svn: 252245
in places where we check for Triple::IOS. They're mostly the same as far
as lldb is conerned.
.
Also add a base cass implementation for Process::IsAlive - Greg added this
last year but it didn't get upstreamed.
llvm-svn: 252227
Summary:
The code which was preventing the usage of the OS plugin while detach is in
progress also prevented us to update the thread list correctly. This resulted
in an empty thread list, which confused the detaching logic. Change the
condition do only do what it says (disable the usage of the OS plugin).
Reviewers: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14201
llvm-svn: 251932
StackFrame * (StackFrame is an ExecutionContextScope.) That allows you to call an
expression on a particular Thread, but not using the context of any particular frame.
That in turn is useful for injecting utility functions that don't actually depend on
locals/self/etc of the current frame.
I also had to include StackFrame.h in a couple of places so the compiler knew
how to downcast StackFrame to ExecutionContextScope.
<rdar://problem/22852953>
llvm-svn: 251564
On UNIX (but not Darwin) the username needs to be respected when creating a
temporary module directory, so that different users don't pollute each others'
module caches.
llvm-svn: 251340
Before, in the absence of any configured REPLs, LLDB would act as if there were
multiple possible REPL options, whereas actually no REPL language is supported.
Now we make a better error.
llvm-svn: 250931
To allow that, I've added a SetREPL call to the Target, which allows a REPL
that just created a target to install itself as the go-to REPL for the
corresponding language.
llvm-svn: 250870
Jason Molenda