We tend to assume that the AA pipeline is by default the default AA
pipeline and it's confusing when it's empty instead.
PR48779
Initially reverted due to BasicAA running analyses in an unspecified
order (multiple function calls as parameters), fixed by fetching
analyses before the call to construct BasicAA.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D95117
We tend to assume that the AA pipeline is by default the default AA
pipeline and it's confusing when it's empty instead.
PR48779
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D95117
Expanding from D94808 - we ensure the same InlineAdvisor is used by both
InlinerPass instances. The notion of mandatory inlining is moved into
the core InlineAdvisor: advisors anyway have to handle that case, so
this change also factors out that a bit better.
Differential Revision: https://reviews.llvm.org/D94825
Enable performing mandatory inlinings upfront, by reusing the same logic
as the full inliner, instead of the AlwaysInliner. This has the
following benefits:
- reduce code duplication - one inliner codebase
- open the opportunity to help the full inliner by performing additional
function passes after the mandatory inlinings, but before th full
inliner. Performing the mandatory inlinings first simplifies the problem
the full inliner needs to solve: less call sites, more contextualization, and,
depending on the additional function optimization passes run between the
2 inliners, higher accuracy of cost models / decision policies.
Note that this patch does not yet enable much in terms of post-always
inline function optimization.
Differential Revision: https://reviews.llvm.org/D91567
Currently, `-indvars` runs first, and then immediately after `-loop-idiom` does.
I'm not really sure if `-loop-idiom` requires `-indvars` to run beforehand,
but i'm *very* sure that `-indvars` requires `-loop-idiom` to run afterwards,
as it can be seen in the phase-ordering test.
LoopIdiom runs on two types of loops: countable ones, and uncountable ones.
For uncountable ones, IndVars obviously didn't make any change to them,
since they are uncountable, so for them the order should be irrelevant.
For countable ones, well, they should have been countable before IndVars
for IndVars to make any change to them, and since SCEV is used on them,
it shouldn't matter if IndVars have already canonicalized them.
So i don't really see why we'd want the current ordering.
Should this cause issues, it will give us a reproducer test case
that shows flaws in this logic, and we then could adjust accordingly.
While this is quite likely beneficial in-the-wild already,
it's a required part for the full motivational pattern
behind `left-shift-until-bittest` loop idiom (D91038).
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D91800
This moves handling of alwaysinline, coroutines, matrix lowering, PGO,
and LTO-required passes into PassBuilder. Much of this is replicated
between Clang and opt. Other out-of-tree users also replicate some of
this, such as Rust [1] replicating the alwaysinline, LTO, and PGO
passes.
The LTO passes are also now run in
build(Thin)LTOPreLinkDefaultPipeline() since they are semantically
required for (Thin)LTO.
[1]: f5230fbf76/compiler/rustc_llvm/llvm-wrapper/PassWrapper.cpp (L896)
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D91585
This patch adds a new pass to add !annotation metadata for entries in
@llvm.global.anotations, which is generated using
__attribute__((annotate("_name"))) on functions in Clang.
This has been discussed on llvm-dev as part of
RFC: Combining Annotation Metadata and Remarks
http://lists.llvm.org/pipermail/llvm-dev/2020-November/146393.html
Reviewed By: thegameg
Differential Revision: https://reviews.llvm.org/D91195
This patch adds a new !annotation metadata kind which can be used to
attach annotation strings to instructions.
It also adds a new pass that emits summary remarks per function with the
counts for each annotation kind.
The intended uses cases for this new metadata is annotating
'interesting' instructions and the remarks should provide additional
insight into transformations applied to a program.
To motivate this, consider these specific questions we would like to get answered:
* How many stores added for automatic variable initialization remain after optimizations? Where are they?
* How many runtime checks inserted by a frontend could be eliminated? Where are the ones that did not get eliminated?
Discussed on llvm-dev as part of 'RFC: Combining Annotation Metadata and Remarks'
(http://lists.llvm.org/pipermail/llvm-dev/2020-November/146393.html)
Reviewed By: thegameg, jdoerfert
Differential Revision: https://reviews.llvm.org/D91188
An alwaysinline function may not get inlined in inliner-wrapper due to
the inlining order.
Previously for the following, the inliner would first inline @a() into @b(),
```
define void @a() {
entry:
call void @b()
ret void
}
define void @b() alwaysinline {
entry:
br label %for.cond
for.cond:
call void @a()
br label %for.cond
}
```
making @b() recursive and unable to be inlined into @a(), ending at
```
define void @a() {
entry:
call void @b()
ret void
}
define void @b() alwaysinline {
entry:
br label %for.cond
for.cond:
call void @b()
br label %for.cond
}
```
Running always-inliner first makes sure that we respect alwaysinline in more cases.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46945.
Reviewed By: davidxl, rnk
Differential Revision: https://reviews.llvm.org/D86988
This broke Chromium's PGO build, it seems because hot-cold-splitting got turned
on unintentionally. See comment on the code review for repro etc.
> This patch adds -f[no-]split-cold-code CC1 options to clang. This allows
> the splitting pass to be toggled on/off. The current method of passing
> `-mllvm -hot-cold-split=true` to clang isn't ideal as it may not compose
> correctly (say, with `-O0` or `-Oz`).
>
> To implement the -fsplit-cold-code option, an attribute is applied to
> functions to indicate that they may be considered for splitting. This
> removes some complexity from the old/new PM pipeline builders, and
> behaves as expected when LTO is enabled.
>
> Co-authored by: Saleem Abdulrasool <compnerd@compnerd.org>
> Differential Revision: https://reviews.llvm.org/D57265
> Reviewed By: Aditya Kumar, Vedant Kumar
> Reviewers: Teresa Johnson, Aditya Kumar, Fedor Sergeev, Philip Pfaffe, Vedant Kumar
This reverts commit 273c299d5d.
After investigation by @asbirlea, the issue that caused the
revert appears to be an issue in the original source, rather
than a problem with the compiler.
This patch enables MemorySSA DSE again.
This reverts commit 915310bf14.
This patch adds -f[no-]split-cold-code CC1 options to clang. This allows
the splitting pass to be toggled on/off. The current method of passing
`-mllvm -hot-cold-split=true` to clang isn't ideal as it may not compose
correctly (say, with `-O0` or `-Oz`).
To implement the -fsplit-cold-code option, an attribute is applied to
functions to indicate that they may be considered for splitting. This
removes some complexity from the old/new PM pipeline builders, and
behaves as expected when LTO is enabled.
Co-authored by: Saleem Abdulrasool <compnerd@compnerd.org>
Differential Revision: https://reviews.llvm.org/D57265
Reviewed By: Aditya Kumar, Vedant Kumar
Reviewers: Teresa Johnson, Aditya Kumar, Fedor Sergeev, Philip Pfaffe, Vedant Kumar
This is one of the reason for extra invalidations in D84959. In
practice, I don't think we have use cases needing this. This simplifies
the pipeline a bit and prune corner cases when considering
invalidations.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D85676
There appears to be a mis-compile with MemorySSA-backed DSE in
combination with llvm.lifetime.end. It currently appears like
DSE is doing the right thing and the llvm.lifetime.end markers
are incorrect. The reverted patch uncovers the mis-compile.
This patch temporarily switches back to the legacy DSE
implementation, while we investigate.
This reverts commit 9d172c8e9c.
This switches to using DSE + MemorySSA by default again, after
fixing the issues reported after the first commit.
Notable fixes fc82006331, a0017c2bc2.
This reverts commit 3a59628f3c.
The tests have been updated and I plan to move them from the MSSA
directory up.
Some end-to-end tests needed small adjustments. One difference to the
legacy DSE is that legacy DSE also deletes trivially dead instructions
that are unrelated to memory operations. Because MemorySSA-backed DSE
just walks the MemorySSA, we only visit/check memory instructions. But
removing unrelated dead instructions is not really DSE's job and other
passes will clean up.
One noteworthy change is in llvm/test/Transforms/Coroutines/ArgAddr.ll,
but I think this comes down to legacy DSE not handling instructions that
may throw correctly in that case. To cover this with MemorySSA-backed
DSE, we need an update to llvm.coro.begin to treat it's return value to
belong to the same underlying object as the passed pointer.
There are some minor cases MemorySSA-backed DSE currently misses, e.g. related
to atomic operations, but I think those can be implemented after the switch.
This has been discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2020-August/144417.html
For the MultiSource/SPEC2000/SPEC2006 the number of eliminated stores
goes from ~17500 (legayc DSE) to ~26300 (MemorySSA-backed). More numbers
and details in the thread on llvm-dev.
Impact on CTMark:
```
Legacy Pass Manager
exec instrs size-text
O3 + 0.60% - 0.27%
ReleaseThinLTO + 1.00% - 0.42%
ReleaseLTO-g. + 0.77% - 0.33%
RelThinLTO (link only) + 0.87% - 0.42%
RelLO-g (link only) + 0.78% - 0.33%
```
http://llvm-compile-time-tracker.com/compare.php?from=3f22e96d95c71ded906c67067d75278efb0a2525&to=ae8be4642533ff03803967ee9d7017c0d73b0ee0&stat=instructions
```
New Pass Manager
exec instrs. size-text
O3 + 0.95% - 0.25%
ReleaseThinLTO + 1.34% - 0.41%
ReleaseLTO-g. + 1.71% - 0.35%
RelThinLTO (link only) + 0.96% - 0.41%
RelLO-g (link only) + 2.21% - 0.35%
```
http://195.201.131.214:8000/compare.php?from=3f22e96d95c71ded906c67067d75278efb0a2525&to=ae8be4642533ff03803967ee9d7017c0d73b0ee0&stat=instructions
Reviewed By: asbirlea, xbolva00, nikic
Differential Revision: https://reviews.llvm.org/D87163
As mentioned on D70376, LVI can currently cause performance issues
when running under NewPM. The problem is that, unlike the legacy
pass manager, NewPM will not immediately discard the LVI analysis
if the following pass does not need it. This is a problem, because
LVI has a high memory requirement, and mass invalidation of LVI
values is very inefficient. LVI should only be alive during passes
that actively interact with it.
This patch addresses the issue by explicitly abandoning LVI after CVP,
which gets us back to the LegacyPM behavior.
Differential Revision: https://reviews.llvm.org/D84959
Problem:
Right now, our "Running pass" is not accurate when passes are wrapped in adaptor because adaptor is never skipped and a pass could be skipped. The other problem is that "Running pass" for a adaptor is before any "Running pass" of passes/analyses it depends on. (for example, FunctionToLoopPassAdaptor). So the order of printing is not the actual order.
Solution:
Doing things like PassManager::Debuglogging is very intrusive because we need to specify Debuglogging whenever adaptor is created. (Actually, right now we're not specifying Debuglogging for some sub-PassManagers. Check PassBuilder)
This patch move debug logging for pass as a PassInstrument callback. We could be sure that all running passes are logged and in the correct order.
This could also be used to implement hierarchy pass logging in legacy PM. We could also move logging of pass manager to this if we want.
The test fixes looks messy. It includes changes:
- Remove PassInstrumentationAnalysis
- Remove PassAdaptor
- If a PassAdaptor is for a real pass, the pass is added
- Pass reorder (to the correct order), related to PassAdaptor
- Add missing passes (due to Debuglogging not passed down)
Reviewed By: asbirlea, aeubanks
Differential Revision: https://reviews.llvm.org/D84774
This restores commit 80d0a137a5, and the
follow on fix in 873c0d0786, with a new
fix for test failures after a 2-stage clang bootstrap, and a more robust
fix for the Chromium build failure that an earlier version partially
fixed. See also discussion on D75201.
Reviewers: evgeny777
Subscribers: mehdi_amini, Prazek, hiraditya, steven_wu, dexonsmith, arphaman, davidxl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73242
EarlyCSE was added with D75145, but the motivating test is
not regressed by removing the extra pass now. That might be
because VectorCombine altered the way it processes instructions,
or it might be from (re)moving VectorCombine in the pipeline.
The extra round of EarlyCSE appears to cost approximately
0.26% in compile-time as discussed in D80236, so we need some
evidence to justify its inclusion here, but we do not have
that (yet).
I suspect that between SLP and VectorCombine, we are creating
patterns that InstCombine and/or codegen are not prepared for,
but we will need to reduce those examples and include them as
PhaseOrdering and/or test-suite benchmarks.
There are 2 known problem patterns shown in the test diffs here:
vector horizontal ops (an x86 specialization) and vector reductions.
SLP has greater ability to match and fold those than vector-combine,
so let SLP have first chance at that.
This is a quick fix while we continue to improve vector-combine and
possibly canonicalize to reduction intrinsics.
In the longer term, we should improve matching of these patterns
because if they were created in the "bad" forms shown here, then we
would miss optimizing them.
I'm not sure what is happening with alias analysis on the addsub test.
The old pass manager now shows an extra line for that, and we see an
improvement that comes from SLP vectorizing a store. I don't know
what's missing with the new pass manager to make that happen.
Strangely, I can't reproduce the behavior if I compile from C++ with
clang and invoke the new PM with "-fexperimental-new-pass-manager".
Differential Revision: https://reviews.llvm.org/D80236
Summary:
This change introduces InliningAdvisor (and related APIs), the interface
that abstracts decision making away from the inlining pass. We will use
this interface to delegate decision making to a trained ML model,
subsequently (see referenced RFC).
RFC: http://lists.llvm.org/pipermail/llvm-dev/2020-April/140763.html
Reviewers: davidxl, eraman, dblaikie
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79042
Summary:
As commented in the code, ProfileSummaryAnalysis is required for inliner
pass to query, so this patch moved
RequireAnalysisPass<ProfileSummaryAnalysis> in the recently created
buildInlinerPipeline.
Reviewer: mtrofin, davidxl, tejohnson, dblaikie, jdoerfert, sstefan1
Reviewed By: mtrofin, davidxl, jdoerfert
Subscribers: hiraditya, steven_wu, dexonsmith, wuzish, llvm-commits,
jsji
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D79696
Summary:
This simplifies testing in scenarios where we want to set up module-wide
analyses for inlining. The patch enables treating inlining and its
function cleanups, as a module pass. The alternative would be for tests
to describe the pipeline, which is tedious and adds maintenance
overhead.
Reviewers: davidxl, dblaikie, jdoerfert, sstefan1
Subscribers: hiraditya, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78512
This pass is created in d6de5f12d4 and tested
for new and legacy pass manager but never added to new pass manager pipeline.
I am adding it to new pass manager pipeline.
This pass is get used in Vector Function Database (VFDatabase) and without
this pass in new pass manager pipeline, none of the vector libraries are work
ing with new pass manager.
Related passes:
66c120f025https://reviews.llvm.org/D74944
Differential revision: https://reviews.llvm.org/D75354
The new and old pass managers (PassManagerBuilder.cpp and
PassBuilder.cpp) are exposed to an `extern` declaration of
`attributor-disable` option which will guard the addition of the
attributor passes to the pass pipelines.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D76871
The initial placement of vector-combine in the opt pipeline revealed phase ordering bugs:
https://bugs.llvm.org/show_bug.cgi?id=45015https://bugs.llvm.org/show_bug.cgi?id=42022
This patch contains a few independent changes:
1. Move the pass up in the pipeline, so it happens just after loop-vectorization.
This is only to keep vectorization passes together in the pipeline at the moment.
I don't have evidence of interaction between these yet.
2. Add an -early-cse pass after -vector-combine to clean up redundant ops. This was
partly proposed as far back as rL219644 (which is why it's effectively being moved
in the old PM code). This is important because the subsequent -instcombine doesn't
work as well without EarlyCSE. With the CSE, -instcombine is able to squash
shuffles together in 1 of the tests (because those are simple "select" shuffles).
3. Remove the -vector-combine pass that was running after SLP. We may want to do that
eventually, but I don't have a test case to support it yet.
Differential Revision: https://reviews.llvm.org/D75145
This reverts commit 80d0a137a5, and the
follow on fix in 873c0d0786. It is
causing test failures after a multi-stage clang bootstrap. See
discussion on D73242 and D75201.
Summary:
Passes ORE, BPI, BFI are not being preserved by Loop passes, hence it
is incorrect to retrieve these passes as cached.
This patch makes the loop passes in question compute a new instance.
In some of these cases, however, it may be beneficial to change the Loop pass to
a Function pass instead, similar to the change for LoopUnrollAndJam.
Reviewers: chandlerc, dmgreen, jdoerfert, reames
Subscribers: mehdi_amini, hiraditya, zzheng, steven_wu, dexonsmith, Whitney, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72891
This restores commit 748bb5a0f1, along
with a fix for a Chromium test suite build issue (and a new test for
that case).
Differential Revision: https://reviews.llvm.org/D73242
We have several bug reports that could be characterized as "reducing scalarization",
and this topic was also raised on llvm-dev recently:
http://lists.llvm.org/pipermail/llvm-dev/2020-January/138157.html
...so I'm proposing that we deal with these patterns in a new, lightweight IR vector
pass that runs before/after other vectorization passes.
There are 4 alternate options that I can think of to deal with this kind of problem
(and we've seen various attempts at all of these), but they all have flaws:
InstCombine - can't happen without TTI, but we don't want target-specific
folds there.
SDAG - too late to assist other vectorization passes; TLI is not equipped
for these kind of cost queries; limited to a single basic block.
CGP - too late to assist other vectorization passes; would need to re-implement
basic cleanups like CSE/instcombine.
SLP - doesn't fit with existing transforms; limited to a single basic block.
This initial patch/transform is based on existing code in AggressiveInstCombine:
we walk backwards through the function looking for a pattern match. But we diverge
from that cost-independent IR canonicalization pass by using TTI to decide if the
vector alternative is profitable.
We probably have at least 10 similar bug reports/patterns (binops, constants,
inserts, cheap shuffles, etc) that would fit in this pass as follow-up enhancements.
It's possible that we could iterate on a worklist to fix-point like InstCombine does,
but it's safer to start with a most basic case and evolve from there, so I didn't
try to do anything fancy with this initial implementation.
Differential Revision: https://reviews.llvm.org/D73480
In addition to the module pass, this patch introduces a CGSCC pass that
runs the Attributor on a strongly connected component of the call graph
(both old and new PM). The Attributor was always design to be used on a
subset of functions which makes this patch mostly mechanical.
The one change is that we give up `norecurse` deduction in the module
pass in favor of doing it during the CGSCC pass. This makes the
interfaces simpler but can be revisited if needed.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D70767
The OpenMPOpt pass is a CGSCC pass in which OpenMP specific
optimizations can reside.
The OpenMPOpt pass uses the OpenMPKinds.def file to identify runtime
calls and their uses. This allows targeted transformations and eases
their implementation.
This initial patch deduplicates `__kmpc_global_thread_num` and
`omp_get_thread_num` calls. We can also identify arguments that are
equivalent to such a call result and use it instead. Later we can
determine "gtid" arguments based on the use in kernel functions etc.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D69930
Summary:
Currently type test assume sequences inserted for devirtualization are
removed during WPD. This patch delays their removal until later in the
optimization pipeline. This is an enabler for upcoming enhancements to
indirect call promotion, for example streamlined promotion guard
sequences that compare against vtable address instead of the target
function, when there are small number of possible vtables (either
determined via WPD or by in-progress type profiling). We need the type
tests to correlate the callsites with the address point offset needed in
the compare sequence, and optionally to associated type summary info
computed during WPD.
This depends on work in D71913 to enable invocation of LowerTypeTests to
drop type test assume sequences, which will now be invoked following ICP
in the ThinLTO post-LTO link pipelines, and also after the existing
export phase LowerTypeTests invocation in regular LTO (which is already
after ICP). We cannot simply move the existing import phase
LowerTypeTests pass later in the ThinLTO post link pipelines, as the
comment in PassBuilder.cpp notes (it must run early because when
performing CFI other passes may disturb the sequences it looks for).
This necessitated adding a new type test resolution "Unknown" that we
can use on the type test assume sequences previously removed by WPD,
that we now want LTT to ignore.
Depends on D71913.
Reviewers: pcc, evgeny777
Subscribers: mehdi_amini, Prazek, hiraditya, steven_wu, dexonsmith, arphaman, davidxl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73242
down to pass builder in ltobackend.
Currently CodeGenOpts like UnrollLoops/VectorizeLoop/VectorizeSLP in clang
are not passed down to pass builder in ltobackend when new pass manager is
used. This is inconsistent with the behavior when new pass manager is used
and thinlto is not used. Such inconsistency causes slp vectorization pass
not being enabled in ltobackend for O3 + thinlto right now. This patch
fixes that.
Differential Revision: https://reviews.llvm.org/D72386
There's quite a lot of references to Polly in the LLVM CMake codebase. However
the registration pattern used by Polly could be useful to other external
projects: thanks to that mechanism it would be possible to develop LLVM
extension without touching the LLVM code base.
This patch has two effects:
1. Remove all code specific to Polly in the llvm/clang codebase, replaicing it
with a generic mechanism
2. Provide a generic mechanism to register compiler extensions.
A compiler extension is similar to a pass plugin, with the notable difference
that the compiler extension can be configured to be built dynamically (like
plugins) or statically (like regular passes).
As a result, people willing to add extra passes to clang/opt can do it using a
separate code repo, but still have their pass be linked in clang/opt as built-in
passes.
Differential Revision: https://reviews.llvm.org/D61446
This reapplies: 8ff85ed905
Original commit message:
As a follow-up to my initial mail to llvm-dev here's a first pass at the O1 described there.
This change doesn't include any change to move from selection dag to fast isel
and that will come with other numbers that should help inform that decision.
There also haven't been any real debuggability studies with this pipeline yet,
this is just the initial start done so that people could see it and we could start
tweaking after.
Test updates: Outside of the newpm tests most of the updates are coming from either
optimization passes not run anymore (and without a compelling argument at the moment)
that were largely used for canonicalization in clang.
Original post:
http://lists.llvm.org/pipermail/llvm-dev/2019-April/131494.html
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65410
This reverts commit c9ddb02659.
This change doesn't include any change to move from selection dag to fast isel
and that will come with other numbers that should help inform that decision.
There also haven't been any real debuggability studies with this pipeline yet,
this is just the initial start done so that people could see it and we could start
tweaking after.
Test updates: Outside of the newpm tests most of the updates are coming from either
optimization passes not run anymore (and without a compelling argument at the moment)
that were largely used for canonicalization in clang.
Original post:
http://lists.llvm.org/pipermail/llvm-dev/2019-April/131494.html
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65410
If there is a small local array accessed in a loop, SROA can't handle memory
accesses with variant offset inside a loop, after the loop is fully unrolled,
all memory accesses to the array are with fixed offset, so now they can be
processed by SROA. But there is no more SROA passes after loop unroll. This
patch add an SROA pass after loop unroll to handle this pattern.
Differential Revision: https://reviews.llvm.org/D68593
Add a pass to lower is.constant and objectsize intrinsics
This pass lowers is.constant and objectsize intrinsics not simplified by
earlier constant folding, i.e. if the object given is not constant or if
not using the optimized pass chain. The result is recursively simplified
and constant conditionals are pruned, so that dead blocks are removed
even for -O0. This allows inline asm blocks with operand constraints to
work all the time.
The new pass replaces the existing lowering in the codegen-prepare pass
and fallbacks in SDAG/GlobalISEL and FastISel. The latter now assert
on the intrinsics.
Differential Revision: https://reviews.llvm.org/D65280
llvm-svn: 374784
This pass lowers is.constant and objectsize intrinsics not simplified by
earlier constant folding, i.e. if the object given is not constant or if
not using the optimized pass chain. The result is recursively simplified
and constant conditionals are pruned, so that dead blocks are removed
even for -O0. This allows inline asm blocks with operand constraints to
work all the time.
The new pass replaces the existing lowering in the codegen-prepare pass
and fallbacks in SDAG/GlobalISEL and FastISel. The latter now assert
on the intrinsics.
Differential Revision: https://reviews.llvm.org/D65280
llvm-svn: 374743
Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
llvm-svn: 371284
Arthur Eubanks